statically bind IPv4 <-> MAC address at boot time.
In order to use this, the administrator needs to configure the following
rc.conf(5) variable:
- static_arp_pairs: A list of names for static bind pairs, and,
- a series of static_arp_(name): the arguments that is being passed to
``arp -S'' operation.
Example:
static_arp_pairs="gw"
static_arp_gw="192.168.1.1 00:01:02:03:04:05"
See the rc.conf(5) manual page for more details.
Reviewed by: -rc@
MFC after: 2 weeks
the kthread_create(9) man page to the kproc(9) page as it had migrated and
people looking for it may need a hand to find its new name.
MFC after: 1 week
better semantics if a request to append an address range to an existing list
fails.
- When cloning an sglist, properly set the length in the new sglist instead of
leaving the new list empty.
- Properly compute the amount of data added to an sglist via
_sglist_append_buf(). This allows sglist_consume_uio() to properly update
uio_resid.
- When a request to append an address range to a scatter/gather list fails,
restore the sglist to the state it had at the start of the function call
instead of resetting it to an empty list.
Requested by: np (3)
Approved by: re (kib)
using freebsd-update. This applies to using freebsd-update in "upgrade
mode" and normal freebsd-update on a security branch.
The backup kernel will be written to /boot/kernel.old, if the directory
does not exist, or the directory was created by freebsd-update in a
previous backup. Otherwise freebsd-update will generate a new directory
name for use by the backup. By default symbol files are not backed up
to save diskspace and avoid filling up the root partition.
This feature is fully configurable in the freebsd-update config file,
but defaults to enabled.
MFC after: 1 week (stable/7)
Reviewed by: cperciva
Approved by: re (kib)
replace it with wrappers around our taskqueue(9).
To make it possible implement taskqueue_member() function which returns 1
if the given thread was created by the given taskqueue.
Approved by: re (kib)
the kern.polling.enable sysctl, remove the sysctl. It has been deprecated
since FreeBSD 6 in favour of per-ifnet polling flags.
Reviewed by: luigi
Approved by: re (kib)
things a bit:
- use dpcpu data to track the ifps with packets queued up,
- per-cpu locking and driver flags
- along with .nh_drainedcpu and NETISR_POLICY_CPU.
- Put the mbufs in flight reference count, preventing interfaces
from going away, under INVARIANTS as this is a general problem
of the stack and should be solved in if.c/netisr but still good
to verify the internal queuing logic.
- Permit changing the MTU to virtually everythinkg like we do for loopback.
Hook epair(4) up to the build.
Approved by: re (kib)
loader, because it uses a reserved suffix (_type). Fix
this by removing the "_" and renaming the tunable to
hw.mxge.rss_hashtype. The old (rss_hash_type) tunable is
still fetched, in case people load the driver via scripts.
When both are present in the kernel environment,
the new value (hw.mxge.rss_hashtype) overrides the old
value.
Approved by: re (kib)
Driver supports Serial ATA and ATAPI devices, Port Multipliers
(including FIS-based switching), hardware command queues (31 command
per port) and Native Command Queuing. This is probably the second on
popularity, after AHCI, type of SATA2 controllers, that benefits from
using CAM, because of hardware command queuing support.
Approved by: re (kib)
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
The default (64K) is too pessimistic for "new comm" hardware.
Also, this is bad because multiple controllers get limited by
the global tunable.
Reviewed by: scottl
Approved by: re (kensmith)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
