Commit Graph

2078 Commits

Author SHA1 Message Date
billf
d79248a7d1 kbdcontrol isn't in everyones path(read: non-root people), so specify
an absolute path for us mere mortals.

Approved by:	jkh
2000-02-10 01:42:04 +00:00
mdodd
81edaf2eb0 Complete the repo-copy of ida_pci.c to sys/dev/ida/
Implicit Approval by:	 jkh
2000-02-09 04:17:10 +00:00
mdodd
da75e44fbb if_fpa is included when 'device fpa' is present, not 'device fea'.
Approved by:	jkh
2000-02-01 16:47:34 +00:00
shin
52220d80c5 Fix kernel build breakage.
ip6_fw.c also needs ipv6firewall options. Sorry for the problem.

Submitted by: Jim Bloom <bloom@acm.org>
2000-01-30 03:52:28 +00:00
peter
394b57d7b2 Use config's tools rather than #if's. 2000-01-29 18:54:12 +00:00
peter
c4b6cd7f5c Remove 'conflicts' token - it has been effectively doing absolutely
nothing for quite some time.  The only thing that cared was userconfig,
but it was for one invisible device so we never saw it's effects.
2000-01-29 18:07:07 +00:00
peter
1caa831a53 Add some more comments about sound card bridge devices and their
relationship with pcm and other things like newmidi.
2000-01-29 17:56:23 +00:00
peter
ceeb2c61a6 Still allow sbc/gusc/csa to perform as bridge devices (eg: to newmidi)
without pcm being present.
2000-01-29 17:48:28 +00:00
peter
46956a66e7 Allow the pnp and pci cards to be attached with just a 'device pcm' in
the user's config file.  Based on an idea/suggestion from Cameron (cg).

Change LINT to build newpcm instead of the old Voxware derived stuff.
That's much more useful in the longer term.
2000-01-29 17:28:48 +00:00
peter
ca8b043d8e Move the (duplicated exactly!) portable ISA pcm drivers to files and
tighten up the logic a little.
2000-01-29 17:15:03 +00:00
peter
d88b6e4e9b Remove (commented out and marked as broken) pseudo-device tb. This was
added in rev 1.205 (october 1995).
2000-01-29 16:39:14 +00:00
peter
c084ca5d69 Remove kern/tty_tb.c. 2000-01-29 16:36:22 +00:00
peter
468e098fa0 Don't build the wdc atapi attachments unless wdc is also present. 2000-01-29 15:58:30 +00:00
peter
e06faf1d94 Arrange for the following files to be compiled when the configuration
conditions are met rather than having to resort to #if's in the code.
> dev/syscons/scvgarndr.c               optional        sc vga
> dev/syscons/scvesactl.c               optional        sc vga vesa
> i386/isa/vesa.c                       optional        vga vesa
2000-01-29 15:04:33 +00:00
shin
5a973d3065 Add ip6fw.
Yes it is almost code freeze, but as the result of many thought, now I
think this should be added before 4.0...

make world check, kernel build check is done.

Reviewed by: green
Obtained from: KAME project
2000-01-29 13:54:44 +00:00
bde
17f54b4408 Add ${DEBUG_FLAGS} to CFLAGS in bsd.kmod.mk, not in scattered module
makefiles.  Bad examples in fxp/Makefile keep getting copied to new
makefiles.
2000-01-28 11:26:46 +00:00
shin
417b54f8df IPv6 multicast routing.
kernel IPv6 multicast routing support.
  pim6 dense mode daemon
  pim6 sparse mode daemon
  netstat support of IPv6 multicast routing statistics

  Merging to the current and testing with other existing multicast routers
  is done by Tatsuya Jinmei <jinmei@kame.net>, who writes and maintainances
  the base code in KAME distribution.

  Make world check and kernel build check was also successful.
2000-01-28 05:10:56 +00:00
nyan
165ca7ea33 Merge from sys/conf/files.i386 revision 1.301. 2000-01-28 01:05:08 +00:00
archie
bb21b7f267 Include ddb/db_sysctl.c when compiling with 'options DDB'. 2000-01-27 22:29:19 +00:00
asmodai
85c0bf5218 Completely remove ATA_16BIT_ONLY, since this is done automatically
by the ata driver nowadays.

OK'd by:	sos,peter
2000-01-27 19:28:15 +00:00
sos
eaf345be5e remove the ATA_16BIT_ONLY options, its now automatic. 2000-01-27 18:53:41 +00:00
asmodai
f9e6dff4fc Removed ATA_STATIC_ID and ATA_16BIT_ONLY from the undocumented
options section, since they are documented higher up in the
file.

Probably forgotten by:	sos
2000-01-27 17:41:38 +00:00
dfr
e21d6d6ca6 Get the ppc driver from sys/isa instead of sys/i386/isa. 2000-01-25 22:25:52 +00:00
peter
c1eb1e6c01 Fix left over references to things like 'ata0' in comments.
Submitted by:	Jim Bloom <bloom@acm.org>
2000-01-25 18:56:41 +00:00
bde
2d72ea0422 Removed ssc and su. 2000-01-25 08:46:15 +00:00
archie
a8773de4fe Reserve a major number for /dev/skip, used by the "security/skip" port. 2000-01-25 02:11:02 +00:00
brian
26fcba4c5a Move the *intrq variables into net/intrq.c and unconditionally
include this in all kernels.  Declare some const *intrq_present
variables that can be checked by a module prior to using *intrq
to queue data.

Make the if_tun module capable of processing atm, ip, ip6, ipx,
natm and netatalk packets when TUNSIFHEAD is ioctl()d on.

Review not required by: freebsd-hackers
2000-01-24 20:39:02 +00:00
peter
0053820449 Copy i386/isa/atapi-cd.[ch] to a new name so that it doesn't have the
same object file (atapi-cd.o) as the ata drivers. I'd have called it
wcd.[ch], but there's already one of those in the Attic that we can't
clobber - the good names are taken.
Fix building so that it can be compiled into LINT alongside ata.

Requested by:	bde
2000-01-24 17:16:03 +00:00
kato
f2f2130c16 Synced with files.i386. 2000-01-24 13:56:57 +00:00
peter
e9cca2953d Remove a bunch of no-op "port ?" and "irq ?" declarations. 2000-01-24 08:49:24 +00:00
peter
0bbdc5307e Activate the newbusified version of si. 2000-01-24 08:12:40 +00:00
peter
535c8837a5 oops, nearly forgot to commit the addition of ppbus_if.m to the list. 2000-01-23 15:42:44 +00:00
peter
e3d364f103 Drop 'at ppbus?' and the trailing '0' from the ppbus children. 2000-01-23 14:46:20 +00:00
peter
805920b490 I missed some trailing digits in a comment.
Submitted by:	asmodai
2000-01-23 14:34:38 +00:00
peter
816e2438e4 Bump configvers.h as a precaution. Although existing config files will
work unmodified still, new config files won't work on the old ones.
2000-01-23 12:24:48 +00:00
peter
e4603c69b9 Update GENERIC/LINT to leave out the useless digit at the end of pci
or other unwired devices.
2000-01-23 12:18:53 +00:00
bp
fc532071c9 Allow if_ef driver to be compiled into kernel. 2000-01-23 03:35:11 +00:00
kato
e65ad563e9 Synced with the sc driver in the sys/dev/syscons directory.
Submitted by:	yokota
2000-01-20 15:16:49 +00:00
msmith
469db80834 Add the pcdmx theatre lighting controller major number 2000-01-20 02:54:03 +00:00
jkh
d9684b5bfd Import simple driver for a parallel port radio clock which receives
the German legal time (commonly available in Europe).

Submitted by:	Sascha Schumann <sascha@schumann.cx>
2000-01-19 18:17:25 +00:00
peter
51121f2d87 Add a warning for the snd drivers and a pointer to pcm/sbc/etc. 2000-01-18 08:31:40 +00:00
asmodai
fae56b48f4 Convert last examples of controller' to device'. 2000-01-16 09:37:18 +00:00
yokota
5db3ba7b9b This is the 3rd stage of syscons code reorganization.
- Split terminal emulation code from the main part of the driver so
that we can have alternative terminal emulator modules if we like in
the future.  (We are not quite there yet, though.)

- Put sysmouse related code in a separate file, thus, simplifying the
main part of the driver.

As some files are added to the source tree, you need to run config(8)
before you compile a new kernel next time.

You shouldn't see any functional change by this commit; this is only
internal code reorganization.
2000-01-15 15:25:43 +00:00
mjacob
5cc043034a Add reference to SES device (it won't be in GENERIC unless folks clamor
for it). Document it's only option.
2000-01-15 07:46:39 +00:00
mjacob
d18a5f5099 add options collateral for SES/SAF-TE driver 2000-01-15 07:12:09 +00:00
mjacob
7e5735696c add file collateral for SES/SAF-TE driver 2000-01-15 07:11:36 +00:00
imp
b780be83a0 Add pccard aic attachment. 2000-01-14 23:44:32 +00:00
wpaul
1e2a8041d0 Add driver support for the Aironet 4500/4800 series wireless 802.11
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.

Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00
mdodd
5c3acbcb23 Oops! We need an entry for if_ie still. Change a few nits
while I'm here.
2000-01-14 18:50:40 +00:00
kato
cd010a1d3e Synced with options.i386 rev 1.132. 2000-01-14 12:56:42 +00:00
peter
a3e8a4d0bf Add back the 'at ppbus?' for the lpt etc drivers. Now it's used. 2000-01-14 08:16:28 +00:00
peter
2d989cd686 Pre 4.0 tidy up.
Collect together the components of several drivers and export eisa from
the i386-only area (It's not, it's on some alphas too).  The code hasn't
been updated to work on the Alpha yet, but that can come later.

Repository copies were done a while ago.
Moving these now keeps them in consistant place across the 4.x series
as the newbusification progresses.

Submitted by:   mdodd
2000-01-14 07:14:17 +00:00
wpaul
25bfa75395 Add device driver support for USB ethernet adapters based on the CATC
USB-EL1202A chipset. Between this and the other two drivers, we should
have support for pretty much every USB ethernet adapter on the market.
The only other USB chip that I know of is the SMC USB97C196, and right
now I don't know of any adapters that use it (including the ones made
by SMC :/ ).

Note that the CATC chip supports a nifty feature: read and write combining.
This allows multiple ethernet packets to be transfered in a single USB
bulk in/out transaction. However I'm again having trouble with large
bulk in transfers like I did with the ADMtek chip, which leads me to
believe that our USB stack needs some work before we can really make
use of this feature. When/if things improve, I intend to revisit the
aue and cue drivers. For now, I've lost enough sanity points.
2000-01-14 03:14:49 +00:00
nsouch
59fc142474 Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
peter
f56c14fd57 Add missing 'DEVICE_SYSCTLS' to opt_bus.h. This is the (experimental?)
code that exports the bus heirarchy to hw.devices.*
2000-01-13 13:29:51 +00:00
mdodd
93d3303e02 Remove the 'at isa? ...' bits for ex0.
Remove the confusing text about pccard and unit numbers for ep0.
2000-01-13 07:01:13 +00:00
nyan
4cffbf8a8e Merge from sys/conf/files.i386 revision 1.296. 2000-01-12 13:43:23 +00:00
peter
f955302964 Add $FreeBSD$
Make the alpha linker script more like the i386 version - delete the
/usr/local and egcs directories
2000-01-11 15:35:16 +00:00
peter
63e5e0617e Aiee! I committed the wrong conf/files. Replace the changes for newppbus
with the intended changes.
Drop db_aout.c from files, let db_kld.c do the work.

Noticed by:	bde
2000-01-11 14:54:09 +00:00
peter
a6ad092de6 Fix a typo in the db_kld.c file - it's kld support not raw a.out support.
Always use db_kld.c for symbol table support as the base kernel maintains
this information.
2000-01-11 13:25:12 +00:00
wpaul
cf16a7efdb Attempt to fix a problem with receiving packets on USB ethernet interfaces.
Packets are received inside USB bulk transfer callbacks, which run at
splusb() (actually splbio()). The packet input queues are meant to be
manipulated at splimp(). However the locking apparently breaks down under
certain circumstances and the input queues can get trampled.

There's a similar problem with if_ppp, which is driven by hardware/tty
interrupts from the serial driver, but which must also manipulate the
packet input queues at splimp(). The fix there is to use a netisr, and
that's the fix I used here. (I can hear you groaning back there. Hush up.)

The usb_ethersubr module maintains a single queue of its own. When a
packet is received in the USB callback routine, it's placed on this
queue with usb_ether_input(). This routine also schedules a soft net
interrupt with schednetisr(). The ISR routine then runs later, at
splnet, outside of the USB callback/interrupt context, and passes the
packet to ether_input(), hopefully in a safe manner.

The reason this is implemented as a separate module is that there are
a limited number of NETISRs that we can use, and snarfing one up for
each driver that needs it is wasteful (there will be three once I get
the CATC driver done). It also reduces code duplication to a certain
small extent. Unfortunately, it also needs to be linked in with the
usb.ko module in order for the USB ethernet drivers to share it.

Also removed some uneeded includes from if_aue.c and if_kue.c

Fix suggested by: peter
Not rejected as a hairbrained idea by: n_hibma
2000-01-10 23:12:54 +00:00
phk
8dbfb233e4 Remove controller miibus, there already were a device miibus. 2000-01-10 12:06:32 +00:00
imp
d207327910 Move xe driver from dev/pccard to dev/xe. Convert driver to newbus.
Driver is not functional yet, but does compile.  Tests with xe cards
indicates that it doesn't panic the machine when they are present, but
fail to probe.  Interface help in the pcic/pccard layers are needed to
complete this driver.
2000-01-10 08:05:53 +00:00
obrien
a9c3ac2a8d * Add `sym' SCSI driver options.
* bring in NIC comments from GENERIC
* slightly reorder a few things in an feable attempt at making the
  organization of LINT more logical.
2000-01-09 23:33:38 +00:00
peter
c63f2fbf0f Point to the right kernel ld script.
Remove stray PC98 make variable.
2000-01-09 17:59:49 +00:00
peter
e826bee2b9 Put on my asbestos suit and move $mach/conf/*.$mach to conf/*.$mach as
hinted at in the previous config(8) commits.  I've spoken about this with
a few people and after the initial suprise wore off they thought it wasn't
a bad idea.  The upshot of it is that all the files*, Makefile*, options*
files are all right next to each other in the hope that people making
changes to one set will remember the others.

Note, config(8) looks to sys/conf first, and falls back to sys/$mach/conf
still, so this doesn't stop people working in subdirs for new platforms.
But once it's in the tree it can be moved next to the other files so that
the non-i386 platforms are (hopefully) treated a little better than as if
they were "second class" ports.

This does not change any user editable files.  the config program is
still run in the same directory as before, the per-platform files
(GENERIC, LINT etc) are still in the same place.
2000-01-09 15:29:10 +00:00
kato
8dcdc1434d Synced with sys/i386/conf/Makefile.i386 (MACHINE -> MACHINE_ARCH).
Pointed out by:	peter
2000-01-09 14:56:07 +00:00
bde
3b97bed679 Removed defunct options EXTRA_SIO and KEY_DEBUG. 2000-01-09 14:47:38 +00:00
kato
24b2790387 Changed MACHINE -> MACHINE_ARCH to make the i386-kernel be able to
compiled on PC98.
2000-01-09 14:43:47 +00:00
kato
a2fa742c8f Synced with sys/i386/conf/files.i386 rev 1.295. 2000-01-09 14:25:50 +00:00
kato
1a5985fb4a Synced with sys/i386/conf/Makefile.i386 rev 1.176. 2000-01-09 14:24:00 +00:00
bde
9bf47018d7 Put COMPAT_SVR4 in opt_dontuse.h for the same reasons as IBCS2 and
COMPAT_LINUX are there.  It shouldn't be and isn't used after config
time, except to complicate the svr4 module makefile.

Moved options for emulators to a separate section.
2000-01-09 10:58:39 +00:00
bde
2d96e5dd45 Compile *_genassym.c with ordinary ${CFLAGS}. The (small) needs for
-U_KERNEL became negative when all all the genassym.c's were converted
to be cross-built.  Related cleanups: PARAM went away, but was still
used here; KERNEL was renamed to _KERNEL, but was still KERNEL here;
the deprecated macros $@ and $< were still used here.

Use "genassym ... > ${.TARGET}", not "genassym -o $@ ...", so that
genassym(1) doesn't need to support -o.

Removed half-baked hard-coded dependencies of *_genassym.o on headers.
These objects should be added to the list of objects in the depend
rule to get full dependencies.  This doesn't happen automatically
because they are not linked into the kernel.  Half baked dependencies
don't really help.
2000-01-09 08:24:27 +00:00
cg
545aee70a6 enable the neomagic driver 2000-01-09 08:17:47 +00:00
bde
d80d29dc27 Quick fix for LINT breakage. KERNFORMAT went away, so don't use it
for trlld.o.
2000-01-09 07:50:42 +00:00
peter
3dc75ce0ff Bump configversion. The controller/device changes are upwards but not
downwards compatable.  If you try and config a s/controller/device/ kernel
with an old config(8), the results will be less than satisfactory.
2000-01-09 07:10:27 +00:00
bde
472e70f939 Add "-I@/../include" and/or "-I${DESTDIR}/usr/include" to CFLAGS,
essentially as in kernel makefiles, so that module sources can include
<stddef.h> and other standard headers.  Only add the second path when
the first path can't be found, instead of when DESTDIR is defined.
Adding it used to be just an obfuscation.

Use "${.OBJDIR}" instyead of "." in -I paths.  Using "${.OBJDIR}" just
gave more verbose command lines and depend files.
2000-01-08 18:48:57 +00:00
peter
8148de2437 config(8) doesn't know anything about scsi devices like it used to, remove
the misleading comments to that effect.
Prune bogus 'at foo?' (smbus, iicbus, ppbus) appendages on things that
they are meaningless for.  It was just eye candy and wasn't used by
anything in the tree.  The interconnects were defined by the drivers
themselves and auto discovery.
(The new ppbus code may change this if it uses the resource_get_*() calls
 to find it's configured children if self discovery isn't possible)
2000-01-08 17:51:33 +00:00
peter
914c86f25f Further sync Alpha and i386 Makefiles. Remove KERNFORMAT = elf stuff as
it's always true on these platforms (and is likely to be on others as
well since loader is the one that is configured for whatever the boot
requirements are)
2000-01-08 17:31:35 +00:00
peter
7c2498d7d5 genassym is ELF-only, therefore the kernel is now ELF-only as well. 2000-01-08 17:12:15 +00:00
marcel
7aebc62b33 Sync with i386
\begin{quote}
Compile genassym.c with ordinary ${CFLAGS}.  The (small) needs for
${GEN_CFLAGS} and -U_KERNEL became negative when all all the
genassym.c's were converted to be cross-built.

Makefile.*:
- Cleanups associated with the old genassym.
- Fixed deprecated spelling of ${.IMPSRC} as "$<".
\end{quote}

Submitted by: bde
2000-01-08 16:43:46 +00:00
peter
1b479380dd s/controller/device/ as per config(8) 2000-01-08 16:03:57 +00:00
bde
56c26012ce Compile genassym.c with ordinary ${CFLAGS}. The (small) needs for
${GEN_CFLAGS} and -U_KERNEL became negative when all all the
genassym.c's were converted to be cross-built.

Makefile.*:
- Cleanups associated with the old genassym.
- Fixed deprecated spelling of ${.IMPSRC} as "$<".
2000-01-08 15:52:22 +00:00
wpaul
c448dd1fa7 Add the vendor and device IDs for a whole bunch of additional USB
ethernet adapters that are supported by the aue and kue drivers.
There are actually a couple more out there from Accton, Asante and
EXP Computer, however I was not able to find any Windows device
drivers for these on their servers, and hence could not harvest
their vendor/device ID info. If somebody has one of these things
and can look in the .inf file that comes with the Windows driver,
I'd appreciate knowing what it says for 'VID' and 'PID.'

Additional adapters include: the D-Link DSB-650 and DSB-650TX, the
SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101.
These are all mentioned in the man pages, relnotes and LINT.

Also correct the date in the kue(4) man page. I wrote this thing
on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
marcel
094d031ba0 Use genassym(1). 2000-01-07 14:58:47 +00:00
newton
23e10c9530 Changes as suggested by bde
Submitted by:	bde
2000-01-07 14:41:12 +00:00
marcel
5bcc2e4ffe Use genassym(1). The definitions of NKPDE and NKPT have been removed
because they are already defined in pmap.h, resulting in duplicate
definitions.

Reviewed by: bde
2000-01-07 11:50:46 +00:00
peter
b06ae99df1 Bring the Alpha and x86 Makefiles closer together. 2000-01-07 05:12:12 +00:00
imp
3817c9f663 FDC_YE has been removed as a valid option.
Noticed by: bde
2000-01-06 16:45:56 +00:00
peter
65fe2b0cb9 Missed s/KERNEL/_KERNEL/ here.. *blush*.
Submitted by:	bde
2000-01-06 13:14:51 +00:00
imp
b1cc754167 Add power_if.[cho] generation for new pccard system.
Also added commented out xe driver pending change.  Should be benign.
2000-01-06 07:18:05 +00:00
newton
5a02f7c1f6 Add documentation for SVR4 options in LINT. 2000-01-05 21:41:16 +00:00
wpaul
a0156fbe84 Add device driver support for USB ethernet adapters based on the
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).

Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.

Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
dillon
f6dd1d61de Update some of the network driver documentation in the LINT file, which
is where most people look to match drivers up with cards.

Reviewed by:	wpaul
2000-01-04 23:09:42 +00:00
mjacob
3ada76392a add wx0 driver 2000-01-04 11:17:35 +00:00
mjacob
941eb34332 add wx (Intel Wiseman Gig Ethernet) driver 2000-01-04 11:01:36 +00:00
mjacob
6af7f84af3 Add in ISP_TARGET_MODE description. 2000-01-04 00:04:27 +00:00
mjacob
816f9eefd5 Add in isp_target.c to be compiled for isp- it'd be nice if we could
do conditional file inclusing based on options.
2000-01-04 00:01:19 +00:00
newton
019aad8716 Add options for COMPAT_SVR4 and DEBUG_SVR4 for completeness. 2000-01-03 20:37:15 +00:00
kato
d71c32fbf8 Synced with sys/i386/conf/Makefile.i386 rev 1.170. 2000-01-03 05:34:48 +00:00