o correct BSSID setup in ah_writeAssocid for 5211 and 5212 (fixes
reception of broadcast frames after association)
o correct transmit retry counts returned by 5211 in ah_procTxDesc
o add missing regulatory domain support that caused use of 11b channels to be
disallowed with some cards (e.g. mini-pci cards in certain IBM laptops)
o miscellaneous fixes to regulatory domain support
o increase size of 5212 ANI table to avoid overflow
o add monitor mode
o remove OS_QSORT support
o fix handling of HAL_RXDESC_INTREQ in ah_setupRxDesc
o rewrite 5212 descriptor handling for portability
o FreeBSD: track alq_open API change
type. We know about header types 0, 1 and 2. Ignore the rest in the
MD i386 code when we're looking for bridges. You cannot look at the
vendor tag. And if you don't you certainly can't look at function > 0
if the device isn't there.
The new soekris boards' GEODE cpu has issues with the old way. This
is reported to have fixed it.
MFC After: 2 days
considered to be good to try when it otherwise has no clue about which
interrupts to try. This is a band-aide and we really should try to
balance the IRQs that we arbitrarily pick, but it should help some
people that would otherwise get bad IRQs.
recompiling the driver. See the comments near the top of "if_em.h"
for descriptions of these delays. Four new loader tunables control
the system-wide default values:
hw.em.tx_int_delay
hw.em.rx_int_delay
hw.em.tx_abs_int_delay
hw.em.rx_abs_int_delay
The tunables are specified in microseconds. The valid range is
0-67108 usec., and 0 means that the timer is disabled.
There are also four new sysctls (actually, a set of four for each
"em" device in the system) to query and change the interrupt delays
after the system is up:
hw.em0.tx_int_delay
hw.em0.rx_int_delay
hw.em0.tx_abs_int_delay (not present for 82542/3/4 adapters)
hw.em0.rx_abs_int_delay (not present for 82542/3/4 adapters)
It seems to be OK to change these values even while the adapter is
passing traffic.
Approved by: Prafulla Deuskar <pdeuskar@FreeBSD.ORG>
MFC after: 4 weeks
- Move isa/ppc* to sys/dev/ppc (repo-copy)
- Add an attachment method to ppc for puc
- In puc we need to walk the chain of parents.
Still to do, is to make ppc(4) & puc(4) work on other platforms. Testers
wanted.
PR: 38372 (in spirit done differently)
Verified by: Make universe (if I messed up a platform please fix)
mac_mls_subject_equal_ok() to mac_mls_subject_privileged(),
which more consistently reflects the fact that this is really
about our notion of privilege in the MLS policy.
Since we don't use suser() for privilege in MLS, remove
the suser check from the ifnet relabel ioctl, and replace it
with an MLS privilege check.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
another thread. We use the td_oncpu member of the other field to locate
it's associated CPU and then search the that CPU's list of spin locks
contained in its per-CPU data. This is not always safe and may in fact
panic or just not work, but it is useful in at least one case.
already checks suser on a network interface relabel, so don't dup it
here. Rely solely on the Biba definition of privilege, which is
already tested.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
Submitted by: Andrew Reisse <areisse@nailabs.com>
callout when a specified number of lines have been output. This can be
used to implement pagers for ddb commands that output a lot of text. A
simple paging function is included that automatically rearms itself when
fired.
Reviewed by: bde, julian
This is controlled by a per-adapter sysctl hw.atm.hfaX.shape. When
set to 0, no shaping occures. When set to 1 at most 1 channel is
shaped. When set to 2 all CBR channels are shaped. Note, that the
latter may actually not work, because of the adapter supporting
the shaping of only one PDU at the same time.
also do it). Three problems have been encountered:
1. The initialisation command does not work in interrupt mode. Whether
this is a firmware bug or a feature is not clear. The original Fore
drivers execute the initialize command always in polling mode, so
it appears that this behaviour is expected. When we detect a 4.X.Y
firmware do busy wait on the command status.
2. The command code of the GET_PROM command has changed. This is an
unofficial command anyway. What was GET_PROM in 3.X.Y is CLEAR_STATS
in 4.X.Y (although unimplemented in the firmware). We need to
use the correct code depending on the firmware.
3. The 4.X.Y firmware can set the error flag in the command status
without also setting the completion flag (as the documenation says).
Check both variants.
An additional field in the per-card structure fu_ft4 is TRUE when we have
detected a 4.X.Y firmware. Otherwise it is false. The behaviour of the
driver when using a 3.X.Y firmware should be identical to the previous
behaviour.
This change will enable traffic shaping of (at least one) CBR channels.
The other option would be to remove it, but I can imagine it may be useful
for the forseeable future as we fiddle with segments in KSE and thr libraries,
that while many maps can exist and be loaded per tag, bus_dmamap_load() and
friends can only be called on one map at a time from the tag. This is
enforced via the mutex arguments in the tag.
Fixing this bug means that s/g lists can be arbitrarily long in length, and
also removes an ugly GNU-ism from the code. No API or ABI change is
incurred. Similar changes for other platforms is forthcoming.
pointer in the PCB of the corresponding thread if it's not the
current thread. This is needed for thr_create() to setup the
newly created thread from the context provided by the application.
This commit finalizes supporting libthr.
created not only with UMA_ZONE_VM but also with UMA_ZONE_NOFREE. In
the i386 case in particular, the pmap code would hook a special
page allocation routine that allocated from kernel_map and not kmem_map,
and so when/if the pageout daemon drained the zones, it could actually
push out slabs from the PV ENTRY zone but call UMA's default page_free,
which resulted in pages allocated from kernel_map being freed to
kmem_map; bad. kmem_free() ignores the return value of the
vm_map_delete and just returns. I'm not sure what the exact
repercussions could be, but it doesn't look good.
In the PAE case on i386, we also set-up a zone in pmap, so be
conservative for now and make that zone also ZONE_NOFREE and
ZONE_VM. Do this for the pmap zones for the other archs too,
although in some cases it may not be entirely necessarily. We'd
rather be safe than sorry at this point.
Perhaps all UMA_ZONE_VM zones should by default be also
UMA_ZONE_NOFREE?
May fix some of silby's crashes on the PV ENTRY zone.
or free a LDT entry. The function has following prototype:
int i386_set_ldt(int start_sel, union descriptor *descs, int num_sels);
Added Features:
o If start_sel is 0, num_sels is 1 and the descriptor pointed to by descs
is legal, then i386_set_ldt() will allocate a descriptor and return its
selector numbe
o If num_descs is 1, start_sels is valid, and descs is NULL, then
i386_set_ldt() will free that descriptor (making it available to be real-
located again later).
o If num_descs is 0, start_sels is 0 and descs is NULL then, as a special
case, i386_set_ldt() will free all descriptors.
Reviewed by: julian
in sync with the backend machdep code. When cpu_thread_init() does not
have the same idea of KSTACK_PAGES as the thing that created the kstack,
all hell breaks loose.
Bad alc! no cookie! :-)
on a non-blocking pipe in cases where select(2) returns the file
descriptor as ready for write. This in turns causes libc_r, for
one, to busy wait in such cases.
Note: it is a quick performance fix, a more complex fix might be
required in case this turns out to have unexpected side effects.
Reviewed by: silby
MFC after: 3 days
thread's pid to make debugging easier for people who don't want to have to
use the intended tool for these panics (witness).
Indirectly prodded by: kris
use "\n\" instead of "\" at the end of each source line, and don't use
semicolons). Fixed some older style bugs on the same lines (mainly
English errors in comments).
1) The race has to do with zone destruction. From the zone destructor we
would lock the zone, set the working set size to 0, then unlock the zone,
drain it, and then free the structure. Within the window following the
working-set-size set to 0 and unlocking of the zone and the point where
in zone_drain we re-acquire the zone lock, the uma timer routine could
have fired off and changed the working set size to something non-zero,
thereby potentially preventing us from completely freeing slabs before
destroying the zone (and thus leaking them).
2) The leak has to do with zone destruction as well. When destroying a
zone we would take care to free all the buckets cached in the zone, but
although we would drain the pcpu cache buckets, we would not free them.
This resulted in leaking a couple of bucket structures (512 bytes each)
per cpu on SMP during zone destruction.
While I'm here, also silence GCC warnings by turning uma_slab_alloc()
from inline to real function. It's too big to be an inline.
Reviewed by: JeffR
a long-standing mistake in the way a portion of a pipe's KVA is
allocated. Specifically, kmem_alloc_pageable() is inappropriate
for use in the "direct" case because it allows a preceding vm map entry
and vm object to be extended to support the new KVA allocation.
However, the direct case KVA allocation should not have a backing
vm object. This is corrected by using kmem_alloc_nofault().
Submitted by: tegge (with the above explanation by me)
tsb_foreach(), 0 signals to terminate the tsb traversal, so when
tsb_foreach() was used in pmap_protect() (which only happens when
the area to be protected is larger than PMAP_TSB_THRESH = 16MB), only
the first tsb entry in the specified range would be protected.
Reported by: Andrew Belashov <bel@orel.ru>
("UMA Zone") carefully, because it does not have pcpu caches allocated
at all. In the UP case, we did not catch this because one pcpu cache
is always allocated with the zone, but for the MP case, we were getting
bogus stats for this zone.
Tested by: Lukas Ertl <le@univie.ac.at>
- In sysctl_vm_zone use the per cpu locks to read the current cache
statistics this makes them more accurate while under heavy load.
Submitted by: tegge
so not only wastes memory but it can also cause a leak in zones that
will be destroyed later. The problem is that the slab allocation code
places newly created slabs on the partially allocated list because it
assumes that the caller will actually allocate some memory from it.
Failure to do so places an otherwise free slab on the partial slab list
where we wont find it later in zone_drain().
Continuously prodded to fix by: phk (Thanks)
with up to date comments. This fixes booting kernels with boot2
(except for loss of the features provided by loader) and is suitable
for MFC. Contrary to the old comments, most loaders don't clear the bss.
biosboot lost clearing of the bss in a code crunch in 1997, and boot2
never did it.
kan didn't notice the problem with gcc-3.3 putting variables that are
initialized to 0 in the bss until after committing gcc-3.3 because he
was already using essentially this patch. Before gcc-3.3, only the
non-critical `bootdev' variable was clobbered by clearing the bss.
MFC after: 3 days
messages are forwarded as netgraph control messages to the node
that is connected to the manage hook. If that hook is not connected,
the event is lost. Flow control events are converted to netgraph
flow control messages and send along the hook that is connected to
the flow controlled VC. ACR change events are converted to control
messages and sent along the hook for the given VC.
instead of int where the variable has to hold buffer lengths,
use u_int for things like number of network interfaces which
in principle can never be negative.
parts of the system about certain kinds of events, like changes
in the ABR rate, changes in the carrier state, PVC changes. The
main consumers of these events are the harp(4) pseudo-driver
and the ILMI daemon via ng_atm(4).
HIDENAME() macro seems to be unimplementable in C. (HIDENAME() used
to use invalid token pasting using ## for the STDC case until gcc
started rejecting that; now it uses unportable token pasting using
juxtaposition in all cases.) This reduces use of HIDENAME() in the
kernel to only i386 and amd64 profiling code so that it doesn't bite
most kernels whenever gcc becomes stricter. Problems with HIDENAME()
in userland are smaller because userland mostly doesn't use strict
flags yet. There are some advantages to hiding the name of mcount,
but newer arches shouldn't do it; only amd64 does.
MFC after: 3 days
On second thoughts hide tmpstk better by staticizing it.
- cut the version string at the newline, suppressing information about
who built the kernel and in what directory. Most of this information
was already lost to truncation.
- on i386, return the precise CPU class (if known) rather than just
"i386". Linux software which uses this information to select
which binary to run often does not know what to make of "i386".
allocation function. With this patch, it prevents continous growth of
the devbuf memory pool.
Tested with ssh <host> dd of=/dev/null < /dev/zero and vmstat -m | grep devbuf
to such devices. If a device fails due to this commit, add:
options DA_OLD_QUIRKS
to the kernel config and recompile. Then send the output of "camcontrol
inquiry da0" to scsi@freebsd.org so the quirk can be re-enabled.
to set np->n_size back to the desired size again after calling
nfs_meta_setsize(), since it could end up in nfs_loadattrcache() getting
called, which would change n_size back to the value it had before the
truncate request was issued. The result of this bug is that the size info
cached in the nfsnode becomes incorrect, lseek(fd, ofs, SEEK_END) seeks
past the end of the file, stat() returns the wrong size, etc.
PR: 41792
MFC after: 2 weeks
kernel ACL interfaces and system call names.
Break out UFS2 and FFS extattr delete and list vnode operations from
setextattr and getextattr to deleteextattr and listextattr, which
cleans up the implementations, and makes the results more readable,
and makes the APIs more clear.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
kern.file sysctl, don't return information about processes that
fail p_cansee(td, p). This prevents sockstat and related
programs from seeing file descriptors owned by processes not
in the same jail as the thread, as well as having implications
for MAC, etc.
This is a partial solution: it permits an information leak about
the number of descriptors in the sizing calculation (but this is
not new information, you can also get it from kern.openfiles),
and doesn't attempt to mask file descriptors based on the
properties of the descriptor, only the process referencing it.
However, it provides most of what you want under most
circumstances, without complicating the locking.
PR: 54211
Based on a patch submitted by: Pawel Jakub Dawidek <nick@garage.freebsd.pl>
receive 6 byte commands. Add a check for this flag to da(4) and cd(4) so
that they honor it. This is a quick workaround for many devices (especially
USB) that require da(4) quirks to operate. The more complete approach is
to finish the new transport code which will be aware of the SCSI version a
transport implements.
MFC after: 1 day
child when forking. This provides a consistent initial state.
Note that cpu_set_upcall() does not clear the per-CPU unique value as
it is followed by a call to set_mcontext(), which sets it accordingly.
in the `video_state' structure, to larger ones (from u_char to
u_short). Each can now hold values at least as large as the
size of the array it is meant to point into.
This eliminates warnings printed by GCC 3.3.1 and hence makes
pcvt compilable using -Werror.
memory in bus_dmamem_alloc(). This is possible now that
contigmalloc() supports the M_ZERO flag.
- Remove the locking of Giant around calls to contigmalloc() since
contigmalloc() now grabs Giant itself.
mainly to quiet a warning emitted by GCC 3.3 about comparing
a variable to a value which is larger than the former can hold.
The value was checked to make sure the `np->squeue' array is
not accessed behind its boundary.
This worked due to possibly accidental truncation when
(np->squeueput + 1) was larger than or equal to MAX_START (256)
when it was assigned to `qidx'.
`qidx' is used to hold the next position in the start queue
for an insertion. The new type was chosen because some other
code in the function ncr_freeze_devq() also uses plain integers
to hold those indices.
Wrapped the line after the closing parenthesis of an `if'
condition.
function unless the device is configured up. Without this fix, the
device ends up in the RUNNING state even though it is configured down.
Also, check the RUNNING flag before calling the if_start function, in
case the if_init function failed for one reason or another.
contain the filedescriptor number on opens from userland.
The index is used rather than a "struct file *" since it conveys a bit
more information, which may be useful to in particular fdescfs and /dev/fd/*
For now pass -1 all over the place.
invariants/witness/etc on i386, sparc64, amd64 and alpha for GENERIC.
Lint probably still needs fixing, as do a couple of other drivers
that have broken recently and not been noticed.
in ntfs_writentvattr_plain and ntfs_readntvattr_plain, and purge the boot
block from the buffer cache if isn't exactly one cluster long. These two
changes work around the same buffer cache bug that ntfs_subr.c 1.30 tried
to, but in a different way. This may decrease throughput by reading smaller
amounts of data from the disk at a time, but may increase it by avoiding
bogus writes of clean buffers.
Problem (re)reported by Karel J. Bosschaart on -current.
switching anymore, so there's no need to save and restore GP. This
change breaks threaded applications linked against libc_r. Pull the
tier 2 card again: relink. This will link against libthr instead.
the "do-nothing" versions of __RCSID(), __RCSID_SOURCE(), __SCCSID(),
and __COPYRIGHT() were not strictly correct. They should not expand
into [nothing], because the ';' which follows them would then cause
a syntax error (in a strict C compiler, if not gcc...).
So, change the do-nothing versions of those macros to use the
'struct __hack' tactic, as was already used with __FBSDID().
Approved by: discussions with bde
MFC after: 1 week
on i486's (and probably i386's), but it has had very little effect
since gcc-2.7 or gcc-2.95. With gcc-3.3, it gave a small
pessimization for at least i386's, athlon-xp's and pentium4's, a
small optimization (I think) for pentium1's, and made no difference
for i386's. (movzbl is best for all the later processors, and the
micro-optimization was to stop it being used on i486's.)
a non-standard construct. Instead, redefine struct _ia64_fpreg as a
union and put a long double in it. On ia64 and for LP64, this is
defined by the ABI to have 16-byte alignment. For ILP32 a long double
has 4-byte alignment, but we don't support ILP32.
Note that the in-memory image of a long double does not match the in-
memory image of spilled FP registers. This means that one cannot use
the fpr_flt field to interpet the bits. For this reason we continue
to use an aggregate type.
connections. While this confuses tcpdump, it enables other applications
to see and analyze non-IP traffic (signalling, for example).
Pointed out by: Vincent Jardin <vjardin@wanadoo.fr>
OID as the other protocol family sub-trees do, that is equal to the
protocol family identifier. Make the ATM layer debugging flags
available under this tree.
Submitted by: Vincent Jardin <vjardin@wanadoo.fr>
MFC after: 2 weeks
set an initial value. This is aimed at getting us closer to being able to
turn -Werror back on and we can adjust the settings later on. Yes, we
could turn off -Wno-inline instead, but that would hide the effect of
gcc's bogo-estimator ignoring inline (either rightly or wrongly).
written as a template that when inlined is specialized for the caller
through constant value propagation and dead code elimination. Thus,
the specialized code that is generated for pmap_clear_reference() et
al. avoids several conditional branches inside of a loop.
fields in the low 32 bits of the local APIC ICR register. Use this macro
in place of APIC_RESV2_MASK when masking off existing bits from the ICR
when writing to it to send an IPI.
Tested by: scottl
but this just created a weird inconsistency when porting gdb(1).
Instead, we name each high FP register seperately, like we do for
all the other registers.
__attribute__((__always_inline__)) by adding an __always_inline macro
(used like __dead2 etc). __inline_damnit has also been suggested but we
have a precedent of keeping the names similar so they are easier to find.
These were a left over from when the private memory pools were
converted to use uma zones. The limit of UMA zones, however,
works differently. When a zone is limited to only one or two pages
than, on multi-cpu systems, processes can get stuck on the zonelimit,
because all remaining free items are in caches of other CPUs.
Also add rudimentary error handling in some places (panic) when a zone
cannot be created.
AMD64, gcc (and the ABI) expects the x87 unit to be running in 80/64
mode (not 64/53) so that it can use it for 'long double' operations. It
takes the expected precision differences into account when generating
code.
the SSE mxcsr register as well. Since gcc will intermix SSE2 and x87
FP code, the fpsetround() etc mode had better be the same.
There are hooks to enable these inlines to be instantiated inside libc
for non-gcc or C++ callers. (g++ doesn't like the inlines that tried
to extract an integer and convert it to an enum).
sis_ioctl() was called, so one had to use ifconfig each time the cable got
plugged in to be able to use the connection.
Do it a better way now, add a "in_tick" field in the softc structure,
call timeout() in sis_tick() and don't call it in sis_init() if in_tick is
non-zero.
Reported by: Landmark Networks
Pointy hat to: cognet
newer lucent/hermes firmware than indicated (investigating). I'm committing
this now since it shouldn't hurt anything.
o Vaguely related, add bogus frame length check from netbsd.
Obtained from: netbsd
LAZY_SWITCH changes. He pointed out the acpi code sets up an identity
mapping in the current vmspace and that got messed up by the %cr3 being
out of sync with the current page directory. As a workaround, restore
%cr3 across the sleep/resume. A more complete fix would be to undo the
lazy state and clear the pm_active bit from the borrowed pmap, but this
works and people are currently hurting. I'll clean this up.
This is mostly Ian's patch, plus a PAE tweak from me.
that an argument is not a NULL pointer.
Apply various obvious places.
I belive __printf*() implies __nonnull() so it is not needed on functions
already tagged that way.
it attaches to all existing NATM network interfaces in the system
and creates a HARP physical interface for each of them. This allows
us to use the same set of ATM drivers for all ATM stuff. It is
possible to use the same interface for HARP, NATM and netgraph at the
same time.
go looking for free fragments won't match. Since we never free this, we
can "throw away" the tag. This is very dirty, and needs to be reimplemented
properly, but fixes performance problems with uhci.
Also assert that when we overlay a structure on some space, that the
space is large enough for the structure.
override in their sub-class; this eliminates the hack of interpreting the
EINPROGRESS return value to mean "don't do any of the normal work"
o correct active scanning so the first channel is only scanned once and so
per-channel passive mode is properly honored
o expose 802.11 FSM state names so every driver doesn't keep a private copy
o eliminate node parameter to ieee80211_begin_scan; it was not being used
namespace. To compensate for it only being used in the !ECDT case, use
a more robust approach to indicate a device was probed via ECDT by setting
the private ivar to be &acpi_ec_devclass. Without the acpi_MatchHid() call
now, it might have been possible for a non-EC device to have had its magic
match our previous flag.
Pointed out by: takawata
to EcGpeQueryHandler on to any waiting threads through the softc. Similar
behavior was in the original version.
Also:
* Merge EcQuery into EcGpeQueryHandler to simplify locking
* Hold EcLock from the initial read of the CSR down to the wakeup or
until after the query command has been processed.
* ec_gpebit only needs to be a UINT8
namespace has been evaluated. Machines with ACPI 2.0 expect this behavior
and have AML which calls EC functions early in the boot process. If the
ECDT is not available, fall back to original probe behavior.
Other minor changes:
* Add GPE bit and GLK usage to the device announcement
* Always use the global lock in the ECDT case, but potentially downgrade to
not using it if _GLK is 0 once the namespace is available. This is
announced with "Changing GLK from 1 to 0"
* Remove the acpi_object_list definitions which were earlier deprecated
Ideas from: takawata
comes across it, it will turn into a core dump in userland instead of
a kernel panic. I had also inverted the sense of the test, so
Double pointy hat to: mtm
- Make m_prepend use m_gethdr instead of m_get where
appropriate
- Make m_copym use m_gethdr instead of m_get where
appropriate
- Add a call to m_fixhdr in m_defrag; m_defrag can't
deal with corrupted pkthdr.len counts.
MFC after: 3 days
