When resetting mlx5core instances it can happen that the order of attach and
detach for mlx5ib instances is changed. Take the unit number for mlx5_%d from
the parent PCI device, similarly to what is done in mlx5en(4), so that there
is a direct relationship between mce<N> and mlx5_<N>.
MFC after: 1 week
Sponsored by: Mellanox Technologies
The DSCP feature is controlled using a set of sysctl(8) fields under
the qos sysctl directory entry for mlx5en(4).
For Routable RoCE QPs, the DSCP should be set in the QP's address path.
The DSCP's value is derived from the traffic class.
Linux commit:
ed88451e1f2d400fd6a743d0a481631cf9f97550
MFC after: 1 week
Sponsored by: Mellanox Technologies
When receiving a PCP change all GID entries are reloaded.
This ensures the relevant GID entries use prio tagging,
by setting VLAN present and VLAN ID to zero.
The priority for prio tagged traffic is set using the regular
rdma_set_service_type() function.
Fake the real network device to have a VLAN ID of zero
when prio tagging is enabled. This is logic is hidden inside
the rdma_vlan_dev_vlan_id() function which must always be used
to retrieve the VLAN ID throughout all of ibcore and the
infiniband network drivers.
The VLAN presence information then propagates through all
of ibcore and so incoming connections will have the VLAN
bit set. The incoming VLAN ID is then checked against the
return value of rdma_vlan_dev_vlan_id().
MFC after: 1 week
Sponsored by: Mellanox Technologies
ig4(4) does not support suspend/resume but present on the hardware where
such functionality is critical, like laptops. Remove PNP info to avoid
breaking suspend/resume on the systems where ig4(4) load is not explicitly
requested by the user.
PR: 229791
Reported by: Ali Abdallah
- Ever since the workaround for the silicon bug of TSO4 causing MAC hangs
was committed in r295133, CSUM_TSO always got disabled unconditionally
by em(4) on the first invocation of em_init_locked(). However, even with
that problem fixed, it turned out that for at least e. g. 82579 not all
necessary TSO workarounds are in place, still causing MAC hangs even at
Gigabit speed. Thus, for stable/11, TSO usage was deliberately disabled
in r323292 (r323293 for stable/10) for the EM-class by default, allowing
users to turn it on if it happens to work with their particular EM MAC
in a Gigabit-only environment.
In head, the TSO workaround for speeds other than Gigabit was lost with
the conversion to iflib(9) in r311849 (possibly along with another one
or two TSO workarounds). Yet at the same time, for EM-class MACs TSO4
got enabled by default again, causing device hangs. Therefore, change the
default for this hardware class back to have TSO4 off, allowing users
to turn it on manually if it happens to work in their environment as
we do in stable/{10,11}. An alternative would be to add a whitelist of
EM-class devices where TSO4 actually is reliable with the workarounds in
place, but given that the advantage of TSO at Gigabit speed is rather
limited - especially with the overhead of these workarounds -, that's
really not worth it. [1]
This change includes the addition of an isc_capabilities to struct
if_softc_ctx so iflib(9) can also handle interface capabilities that
shouldn't be enabled by default which is used to handle the default-off
capabilities of e1000 as suggested by shurd@ and moving their handling
from em_setup_interface() to em_if_attach_pre() accordingly.
- Although 82543 support TSO4 in theory, the former lem(4) didn't have
support for TSO4, presumably because TSO4 is even more broken in the
LEM-class of MACs than the later EM ones. Still, TSO4 for LEM-class
devices was enabled as part of the conversion to iflib(9) in r311849,
causing device hangs. So revert back to the pre-r311849 behavior of
not supporting TSO4 for LEM-class at all, which includes not creating
a TSO DMA tag in iflib(9) for devices not having IFCAP_TSO4 set. [2]
- In fact, the FreeBSD TCP stack can handle a TSO size of IP_MAXPACKET
(65535) rather than FREEBSD_TSO_SIZE_MAX (65518). However, the TSO
DMA must have a maxsize of the maximum TSO size plus the size of a
VLAN header for software VLAN tagging. The iflib(9) converted em(4),
thus, first correctly sets scctx->isc_tx_tso_size_max to EM_TSO_SIZE
in em_if_attach_pre(), but later on overrides it with IP_MAXPACKET
in em_setup_interface() (apparently, left-over from pre-iflib(9)
times). So remove the later and correct iflib(9) to correctly cap
the maximum TSO size reported to the stack at IP_MAXPACKET. While at
it, let iflib(9) use if_sethwtsomax*().
This change includes the addition of isc_tso_max{seg,}size DMA engine
constraints for the TSO DMA tag to struct if_shared_ctx and letting
iflib_txsd_alloc() automatically adjust the maxsize of that tag in case
IFCAP_VLAN_MTU is supported as requested by shurd@.
- Move the if_setifheaderlen(9) call for adjusting the maximum Ethernet
header length from {ixgbe,ixl,ixlv,ixv,em}_setup_interface() to iflib(9)
so adjustment is automatically done in case IFCAP_VLAN_MTU is supported.
As a consequence, this adjustment now is also done in case of bnxt(4)
which missed it previously.
- Move the reduction of the maximum TSO segment count reported to the
stack by the number of m_pullup(9) calls (which in the worst case,
can add another mbuf and, thus, the requirement for another DMA
segment each) in the transmit path for performance reasons from
em_setup_interface() to iflib_txsd_alloc() as these pull-ups are now
done in iflib_parse_header() rather than in the no longer existing
em_xmit(). Moreover, this optimization applies to all drivers using
iflib(9) and not just em(4); all in-tree iflib(9) consumers still
have enough room to handle full size TSO packets. Also, reduce the
adjustment to the maximum number of m_pullup(9)'s now performed in
iflib_parse_header().
- Prior to the conversion of em(4)/igb(4)/lem(4) and ixl(4) to iflib(9)
in r311849 and r335338 respectively, these drivers didn't enable
IFCAP_VLAN_HWFILTER by default due to VLAN events not being passed
through by lagg(4). With iflib(9), IFCAP_VLAN_HWFILTER was turned on
by default but also lagg(4) was fixed in that regard in r203548. So
just remove the now redundant and defunct IFCAP_VLAN_HWFILTER handling
in {em,ixl,ixlv}_setup_interface().
- Nuke other redundant IFCAP_* setting in {em,ixl,ixlv}_setup_interface()
which is (more completely) already done in {em,ixl,ixlv}_if_attach_pre()
now.
- Remove some redundant/dead setting of scctx->isc_tx_csum_flags in
em_if_attach_pre().
- Remove some IFCAP_* duplicated either directly or indirectly (e. g.
via IFCAP_HWCSUM) in {EM,IGB,IXL}_CAPS.
- Don't bother to fiddle with IFCAP_HWSTATS in ixgbe(4)/ixgbev(4) as
iflib(9) adds that capability unconditionally.
- Remove some unused macros from em(4).
- Bump __FreeBSD_version as some of the above changes require the modules
of drivers using iflib(9) to be recompiled.
Okayed by: sbruno@ at 201806 DevSummit Transport Working Group [1]
Reviewed by: sbruno (earlier version), erj
PR: 219428 (part of; comment #10) [1], 220997 (part of; comment #3) [2]
Differential Revision: https://reviews.freebsd.org/D15720
events are passed through by lagg(4) ever since r203548. Deactivation of
this capability by default due to lagg(4) was already not done for ixgbev(4)
and has been - although inadvertently - broken when em(4)/igb(4)/lem(4) and
ixl(4) were converted to iflib(9) in r311849 and r335338 respectively.
Reviewed by: erj
Differential Revision: https://reviews.freebsd.org/D15720 (part of)
In some cases it seems that the PHY mode can only be identified by
matching against the corresponding device node name in the FDT. r334880
broke this for the case where the node name contains a unit address.
Fix the problem by allowing a match in that case.
Reviewed by: andrew, sbruno
Tested by: sbruno
Differential Revision: https://reviews.freebsd.org/D16259
- Resources used by spigen_mmap_single() are now tracked using
devfs_set_cdevpriv() rather than in the softc.
- Since resources are now tracked per-open-fd, there is no need to try to
impose any exclusive-open logic, so flags related to that are removed.
- Flags used to track open status to prevent detach() when the device is
open are replaced with calls to device_busy()/device_unbusy(). That
extends the protection up the hierarchy so that the spibus and hardware
controller drivers also can't be detached while the device is open/in use.
- Arbitrary limits on the maximum size of a transfer are removed, along with
the sysctl variables that allowed the limits to be changed. There is just
no reason to limit the size of a spi transfer to the machine's page size.
Or to any other arbitrary value, really.
- Most of the locking is removed. It was mostly protecting access to flags
and fields in the softc that no longer exist. The locking that remains is
just to prevent concurrent calls to device_[un]busy().
- The code was calling malloc() with M_WAITOK while holding a mutex in
several places. Since most of the locking is gone, that's fixed.
Summary:
Add the device id of the Panda Wireless PAU06 which seems to be
the already-supported combination of RT5392 MAC and RF RT5372
radio.
Reviewed By: allanjude, eadler, jhb
Approved By: jhb
Differential Revision: https://reviews.freebsd.org/D16211
Add few quirks which are necessary to use AHCI on ThX2
Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Differential revision: https://reviews.freebsd.org/D15929
Move the module declaration so that it's after the device table.
The PNP_INFO must come after the module declaration.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Differential Revision: https://reviews.freebsd.org/D15995
Move device table earlier in the file so we can reference it in the
PNP_INFO macro.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/5
Make unsigned values uint16_t for pnp table. They are properly
uint16_t befause they are 16-bit PCI IDs. The PNP_INFO language has no
type for bare unsigned.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/5
Move module delcaration to be after device table. The PNP_INFO must
follow the module declaration.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
Pull Request: https://github.com/bsdimp/freebsd/pull/5
FreeBSD VM can't boot up on Hyper-V after the recent malloc change in
r335068: Make UMA and malloc(9) return non-executable memory in most cases.
The hypercall page here must be executable.
Fix the boot-up issue by adding M_EXEC.
PR: 229167
Sponsored by: Microsoft
Add PCI ids for I2C controllers on Apollo Lake platform. Also convert
switch/case probe logic into a table.
Reviewed by: avg
Differential Revision: https://reviews.freebsd.org/D16120
doing it last. Also, remove the local tracking of whether usb's busdma
memory allocation got done, because it's safe to call the free_all
function even if it wasn't.
r333175 (multicast changes) exposed a bug where
mxge was not checking to see if the driver was being
unloaded while handing ioctls that touch hardware.
As a result, now that in6m_disconnect() is run from
an async gtaskq, it was busy-waiting in mxge_send_cmd()
while the mcast list was destroyed.
Also replace numbered list with - bulleted so the list entries do not
need to be renumbered as tasks are completed.
Sponsored by: The FreeBSD Foundation
It's likely that the header was needed in the past for swi(9).
But now that code does not use swi(9) or any other interfaces defined
in sys/interrupt.h.
MFC after: 1 week
On FDT-enabled platforms check if DTB blob has MAC address configured by
a boot loader. This information passed as a "local-mac-address" or
"mac-address" property of the device node. For USB NICs node
can be found by looking for compatibility string "usbVVV,PPP" where
VVV - vendor id (hex) and PPP - product id (hex)
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D16117
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
there's no longer any benefit to dropping the pcbinfo lock
and trying to do so just adds an error prone branchfest to
these functions
- Remove cases of same function recursion on the epoch as
recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
thread as the tracker field is now stack or heap allocated
as appropriate.
Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
this function and that we aren't supposed to be controlled by the first
if() conditional. Found with gcc.
No functional change is intended with this commit.
Found with gcc.
sys/dev/ata/chipsets/ata-siliconimage.c: In function 'ata_cmd_ch_attach':
sys/dev/ata/chipsets/ata-siliconimage.c:187:5:
warning: this 'if' clause does not guard... [-Wmisleading-indentation]
if (ctlr->chip->cfg2 & SII_INTR)
^~
sys/dev/ata/chipsets/ata-siliconimage.c:190:2:
note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
ch->flags |= ATA_NO_ATAPI_DMA;
work when called by members of the 'operator' group. They are already
allowed to eg power off the system (via suid shutdown(8)), so they
might as well be permitted to suspend it.
Tested by: xmj@
Reviewed by: delphij@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16062
lock order reversal: (sleepable after non-sleepable)
1st 0xfffffe00357ff538 xnb_softc (xen netback softc lock) @ /usr/src/sys/dev/xen/netback/netback.c:1069
2nd 0xffffffff81fdccb0 intrsrc (intrsrc) @ /usr/src/sys/x86/x86/intr_machdep.c:224
There's no need to hold the lock since the cleaning of the interrupt
cannot happen in parallel due to the XNBF_IN_SHUTDOWN flag being set.
Note that the locking in netback needs some improvement or
clarification.
While there also remove a double newline.
Sponsored by: Citrix Systems R&D
To workaround buggy firmware that sets this flag when there's actually
a VGA present.
Reported and tested by: Yasuhiro KIMURA <yasu@utahime.org>
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D16003
than assigning spigen device names in order of creation, this uses a device
name that corresponds to the owning spibus and chip-select index.
Example: /dev/spigen0.1 would be a child of spibus0, and use cs = 1
The intent is for systems like Raspberry Pi to have a consistent way of
using an SPI interface with a specific cs value from a user application.
Otherwise, there is no consistent way of knowing which cs pin will be
assigned to a particular spigen device. The alternative is to specify
everything in "the right order" in an overlay file, which is less than
ideal. Additionally, this duplicates (to some extent) the way Linux handles
a similar situation with their 'spidev' device, so it would be somewhat
familiar to those who also use Linux.
A new kernel config option, SPIGEN_LEGACY_CDEVNAME, causes the driver to
also create /dev/spigenN device name aliases, with N incrementing in the
order of device instantiation. This is provided to ease the transition
for existing systems using the original naming convention (particularly
when these changes are MFC'd to stable branches).
Differential Revision: https://reviews.freebsd.org/D15301
Without a call to check_free_callbacks() clients waiting for grant
references would not be woken up even when there are sufficient grant
references available.
The check was likely left out as a mistake when the function was first
added.
Note that other functions used to free grant references already call
check_free_callbacks.
Submitted by: pratyush
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D15899
Summary: In order to use cpufreq(4), a dev.cpu attachment must be created. If
the IBM property is found denoting SMT, attach only to the first thread setup,
so that a cpufreq device can bind.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15921
The veriexec device features the following ioctl commands:
VERIEXEC_ACTIVE
Activate veriexec functionality
VERIEXEC_DEBUG_ON
Enable debugging mode and increment or set the debug level
VERIEXEC_DEBUG_OFF
Disable debugging mode
VERIEXEC_ENFORCE
Enforce veriexec fingerprinting (and acitvate if not already)
VERIEXEC_GETSTATE
Get current veriexec state
VERIEXEC_LOCK
Lock changes to veriexec meta-data store
VERIEXEC_LOAD
Load veriexec fingerprint if secure level is not raised (and passes the
checks for VERIEXEC_SIGNED_LOAD)
VERIEXEC_SIGNED_LOAD
Load veriexec fingerprints from loader that supports signed manifest
(and thus we can be more lenient about secure level being raised.)
Fingerprints can be loaded if the meta-data store is not locked. Also
securelevel must not have been raised or some fingerprints must have
already been loaded, otherwise it would be dangerous to allow loading.
(Note: this assumes that the fingerprints in the meta-data store at
least cover the fingerprint loader.)
Reviewed by: jtl
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8561
can time out if it's backed up due to a non-stop deluge of PAUSE frames
from a misbehaving peer. Detect this situation and toggle MPS TxEn
to allow forward progress.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Add macros for R12A_RXDMA_PRO register (descriptions were seen in the
RTL8822B vendor driver) and merge 2 r21au_init_burstlen() copies.
No functional change intended.
Update the driver to use iflib in order to bring performance,
maintainability, and (hopefully) stability benefits to the driver.
The driver currently isn't completely ported; features that are missing:
- VF driver (ixlv)
- SR-IOV host support
- RDMA support
The plan is to have these re-added to the driver before the next FreeBSD release.
Reviewed by: gallatin@
Contributions by: gallatin@, mmacy@, krzysztof.galazka@intel.com
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 month
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15577
Add a few intermediate casts to intptr_t to suppress "cast to pointer
from integer of different size" warnings from gcc. In this case, the
'arg2' part of SYSCTL_HANDLER_ARGS is used to pass in a pointer, via an
intermediate intmax_t, so no information is lost.
Reviewed by: avg
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15725
For most regulators, the regulator_stop() method can be transformed to
regulator disable. But, in some cases, we needs to maintain shared data
across multiple regulators (e.g. single GPIO pin which works as enable
for multiple regulates). In this case, the implementation of regulator
should perform his own enable counting therefore it is necessary to
distinguish between the regulator enable/disable method (which
increments/decrements enable counter for shared resource) and regulator
stop method (which don't affect it).
So:
- add regnode_stop() method to regulator framework and default it to
regnode_enable(..., false, ...)
- implement it in regulator_fixed with proper enable counting.
While I'm in, also fix handling of always_on property. If any of regulators
sharing same GPIO pin have it enabled, then none of them can disable regulator.
Tested by: kevans
MFC after: 3 weeks
of descriptors processed. Add the ability to gather a certain maximum
number of frames in the driver's rx before waking up netmap rx. If
there aren't enough frames then netmap rx will be woken up as usual.
hw.cxgbe.nm_rx_nframes
Sponsored by: Chelsio Communications
Summary:
Newer OPAL device trees, such as those on POWER9 systems, use 'pciex' for
device_type, not 'pci'. Rather than enumerating all possible variants, just
check for a 'pci' prefix.
Reviewed by: nwhitehorn, breno.leitao_gmail.com
Differential Revision: https://reviews.freebsd.org/D15817
The driver assumes the list can change (even though it does't right now)
and queries it every time the sysctl runs.
sysctl dev.<nexus>.<inst>.local_cpus
sysctl dev.<nexus>.<inst>.intr_cpus
sysctl dev.t6nex.0.local_cpus
sysctl dev.t6nex.0.intr_cpus
Sponsored by: Chelsio Communications
These are represented as booleans on the kernel-side, but were being exposed
as int. This was causing some funky things to happen when read later with
sysctl(8), e.g. randomly reading super-high when the value was actually
'0'/false.
Reviewed by: manu
original initialization, so we don't miss few registers to
configure.
This fixes vtnet(4) operation with QEMU's virtio-net-device.
Tested in QEMU with FreeBSD/RISC-V.
Reviewed by: bryanv
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15821
This was the wrong solution to the problem; regulator_shutdown invokes
regnode_stop. regulator_stop is not a refcounting method, but it invokes
regnode_enable, which is.
mmel@ has a proposed patch/solution to instead provide regnode_fixed_stop
behavior that properly takes shared GPIO pins into account.
Only the first device will print
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
instead of all hyper threads
Submitted by: kbowling
Reviewed by: imp, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15727
regnode::enable_cnt is generally used to refcount regulator nodes. For
GPIOs, the refcount was done on the gpio_entry since more than one regulator
can share a GPIO.
GPIO regulators were not taking part in the node refcount, since they had
their own mechanism. This caused some fallout after manu started disabling
everybody's unused regulators in r331989.
Refcount it.
Glanced over by: manu
Mark the PNP table, but still need to handle the CLASS / SUBCLASS /
REVID matching.
Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
to call into the firmware in a similar way to the existing PSCI, and used
PSCI to detect when SMCCC is enabled.
There is a function ID space we can use. Currently we only support 3
functions in the ARM Architecture Calls region, however it is expected we
will expend these in the future.
Sponsored by: DARPA, AFRL
Some casts from pointers to uint64_t and back in lio_main.c cause base
gcc on i386 to warn "cast from pointer to integer of different size",
and vice versa. Add additional casts to uintptr_t to suppress these.
Reviewed by: sbruno
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15754
Generating the pnp info have the side effect to include all nodes even
if the status isn't "okay".
That means that loading the module will load but not attach as it checks
the status in the probe function.
On pine64 before :
root@pine64-lts:~ # devmatch -u
unattached on ofwbus pnpinfo name=memory
unattached on ofwbus pnpinfo name=chosen
unattached on ofwbus pnpinfo name=sound_spdif compat=simple-audio-card
unattached on ofwbus pnpinfo name=spdif-out compat=linux,spdif-dit
unattached on simplebus pnpinfo name=dma-controller@1c02000 compat=allwinner,sun50i-a64-dma
unattached on simplebus pnpinfo name=mmc@1c10000 compat=allwinner,sun50i-a64-mmc
unattached on simplebus pnpinfo name=usb@1c19000 compat=allwinner,sun8i-a33-musb
unattached on simplebus pnpinfo name=spdif@1c21000 compat=allwinner,sun50i-a64-spdif
unattached on simplebus pnpinfo name=i2s@1c22000 compat=allwinner,sun50i-a64-i2s
unattached on simplebus pnpinfo name=i2s@1c22400 compat=allwinner,sun50i-a64-i2s
unattached on simplebus pnpinfo name=serial@1c28400 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c28800 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c28c00 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=serial@1c29000 compat=snps,dw-apb-uart
unattached on simplebus pnpinfo name=i2c@1c2ac00 compat=allwinner,sun6i-a31-i2c
unattached on simplebus pnpinfo name=i2c@1c2b000 compat=allwinner,sun6i-a31-i2c
unattached on simplebus pnpinfo name=i2c@1c2b400 compat=allwinner,sun6i-a31-i2c
unattached on ofwbus pnpinfo name=aliases
unattached on ofwbus pnpinfo name=symbols
All simplebus node are disabled
After :
root@pine64-lts:~ # devmatch -u
unattached on ofwbus pnpinfo name=memory
unattached on ofwbus pnpinfo name=chosen
unattached on ofwbus pnpinfo name=sound_spdif compat=simple-audio-card
unattached on ofwbus pnpinfo name=spdif-out compat=linux,spdif-dit
unattached on simplebus pnpinfo name=dma-controller@1c02000 compat=allwinner,sun50i-a64-dma
unattached on simplebus pnpinfo name=usb@1c19000 compat=allwinner,sun8i-a33-musb
unattached on ofwbus pnpinfo name=aliases
unattached on ofwbus pnpinfo name=symbols
Reviewed by: imp (with some objection)
Differential Revision: https://reviews.freebsd.org/D15770
This is in preperation for supporting newer smccc functions that also use
the same call method.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D15745
It was needed only for ia64 where it was implemented as a call to
bswapXX, which was always a real function. htobeXX with a constant
argument is calculated at compile-time everywhere else.
MFC after: 1 week
Sponsored by: Chelsio Communications
lan78xx_eeprom_read just checked for EEPROM presence then called
lan78xx_eeprom_read_raw if present, and had only one caller. Introduce
lan78xx_eeprom_present to check for EEPROM presence, and use it in the
one place it is needed.
This is used by r334964, which was accidentally committed out-of-order
from my work tree.
Reported by: markj
Sponsored by: The FreeBSD Foundation
Differences between LAN7800 and LAN7850 from the driver's perspective:
* The LAN7800 muxes EEPROM signals with LEDs, so LED mode needs to be
disabled when reading/writing EEPROM. The EEPROM is not muxed on the
LAN7850.
* The Linux driver enables automatic duplex and speed detection when
there is no EEPROM, for the LAN7800 only. With this FreeBSD driver
LAN7850-based adapters without a configuration EEPROM fail to link
(with or without the automatic duplex and speed detection code), so
I have just followed the example of the Linux driver for now.
Sponsored by: The FreeBSD Foundation
Sponsored by: Microchip (hardware)
Casting from rman_res_t to a pointer results in "cast to pointer from
integer of different size" warnings with base gcc on i386, so print
these without casting. The kva field of struct bxe_bar is of type
vm_offset_t, which can be 32 or 64 bit, so cast it to uintmax_t before
printing.
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15733
Base gcc fails to compile sys/dev/drm2/i915/intel_display.c for i386,
with the following -Werror warnings:
cc1: warnings being treated as errors
/usr/src/sys/dev/drm2/i915/intel_display.c:8884: warning:
initialization from incompatible pointer type
This is due to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36432, which
incorrectly interprets the [] as a flexible array member.
Because base gcc does not have a -W flag to suppress this particular
warning, it requires a rather ugly cast. To not influence any other
compiler, put it in a #if/#endif block.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15744
Add a few intermediate casts to uintptr_t to suppress "cast to pointer
from integer of different size" warnings from gcc. Also remove a few
incorrect casts.
Reviewed by: ram
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15747
These ioctls are not documented and only stubbed in a few drivers: mse(4),
psm(4) and syscon's sysmouse(4). The only exception is MOUSE_GETVARS
implemented in psm(4)
Given the fact that they were introduced 20 years ago and implementation
has never been completed, remove any related code.
PR: 228718 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15726
when parsing the phy type, however this is included in the length returned
by OF_getprop. To fix this stop ignoring the terminator.
PR: 228828
Reported by: sbruno
Sponsored by: DARPA, AFRL
If we fail noise floor calibration then we may end up with a deaf NIC
which we can't recover without a full chip reset.
Earlier chips seem to get less stuck in this condition versus AR9280/later
and AR9300/later, but whilst here just fix up the AR5212 era chips to also
return NF calibration failures.
This HAL routine would only return failure if the channel was not configured.
This is a no-op until the driver side code for doing resets and the HAL
code for being told about the reset type (and then handling it!) is
implemented.
Tested:
* AR9280, STA mode
* AR2425, STA mode
* AR9380, STA mode
pmc_process_interrupt takes 5 arguments when only 3 are needed.
cpu is always available in curcpu and inuserspace can always be
derived from the passed trapframe.
While facially a reasonable cleanup this change was motivated
by the need to workaround a compiler bug.
core2_intr(cpu, tf) ->
pmc_process_interrupt(cpu, ring, pmc, tf, inuserspace) ->
pmc_add_sample(cpu, ring, pm, tf, inuserspace)
In the process of optimizing the tail call the tf pointer was getting
clobbered:
(kgdb) up
at /storage/mmacy/devel/freebsd/sys/dev/hwpmc/hwpmc_mod.c:4709
4709 pmc_save_kernel_callchain(ps->ps_pc,
(kgdb) up
1205 error = pmc_process_interrupt(cpu, PMC_HR, pm, tf,
resulting in a crash in pmc_save_kernel_callchain.
Fix the behavior of ofw_fdt_getprop() and ofw_fdt_getprop() functions to match
the documentation as the non-fdt code.
Submitted by: Luis Pires <lffpires@ruabrasil.org>
Reviewed by: manu, jhibbits
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D15680
On PowerNV systems, the rootfs is passed through kexec, which loads the rootfs
into memory and set two fdt entries to describe where the file is located in
the memory;
I need to pass this memory region to the md device as a mfs_root, but, current
md driver does not support two things:
* Just getting a pointer from an external (bootloader) memory. If I need to
workaround it, I would need to declare a static array and memcopy from this
external memory to this static variable.
* The size of the image. The usage of mfs_root_end, which is not a pointer,
seems to be not possible for this prestaged scenario.
This patch simply adds a new way to load mfs_root from memory.
Differential Revision: https://reviews.freebsd.org/D15625
Approved by: kib, jhibbits (mentor)
- add '-j' options to filter to enable converting native pmc
log format to json lines format to enable the use of scripts
and external tooling
% pmc filter -j pmc.log pmc.jsonl
- Record the tsc value in sampling interrupts as opposed to
recording nanotime when the sample is copied to a global log
in hardclock - potentially many milliseconds later.
- At initialize record the tsc_freq and the time of day to give
us an offset for translating the tsc values in callchain records
Utility hangs when OCS_IOCTL_CMD_MGMT_GET_ALL called in parallel on port 0 and port 1.
Fix: Using static structure for results is corrupting the second ioctl request. Removed static for results structure.
Approved by: ken
MFC after: 3 days
This adds several vendors from NetBSD's copy of the same file (r1.749).
Prefer longer more "canonical" names where the names differed.
Sort while here.
By logging all threads and processes 'pmc filter'
can now filter on process or thread name, relieving
the user of the burden of determining which tid or
pid was which when the sample was taken.
% pmc filter -T if_io_tqg -P nginx pmc.log pmc-iflib.log
% pmc filter -x -T idle pmc.log pmc-noidle.log
- increase pmc cpuid field from 8 to 12 bits
- add cpuid version string to initialize entry in the log
so that filter can identify which counter index an
event name maps to
- GC unused config flags
- make fixed counter assignment more robust as well as the
changes needed to be properly identified for filter
This adds the -U options to pmcstat which will attribute in-kernel samples
back to the user stack that invoked the system call. It is not the default,
because when looking at kernel profiles it is generally more desirable to
merge all instances of a given system call together.
Although heavily revised, this change is directly derived from D7350 by
Jonathan T. Looney.
Obtained from: jtl
Sponsored by: Juniper Networks, Limelight Networks
Some of the routines were using artificially limited builtin already,
drop the explicit limit.
The use of builtins allows quite often allows the compiler to elide the call
or most zeroing to begin with. For instance, if the target object is 32 bytes
in size and gets zeroed + has 16 bytes initialized, the compiler can just
add code to zero out the rest.
Note not all the primites have asm variants and some of the existing ones
are not optimized. Maintaines are strongly encourage to take a look
(regardless of this change).
or 4 CPUs. Add a compile-time option SC_KERNEL_CONS_ATTRS to control the
defaults.
Default to color numbers in reverse order to CPU numbers (instead of
in the same order with white first and wrapping to dark grey), so that
the brightest bright colors are used first. Don't use dark grey at all;
replace it by dark green.
Syscons has too many compile-time options, but this one is needed in
in case the defaults give something like white on white, or the user
really hates this feature and can't wait to turn it off in rc.
MFC after: next release?
The per-CPU ts is not initialized early, so the global kernel ts is used
early, but it ony has 1 (normal) attribute. Switch this to the per-CPU
attribute.
The difference is most visible with EARLY_AP_STARTUP.
Change to using the curcpu macro instead of PCPU_GET(cpuid) in 2 places for
the above and in 1 other place in my old code in syscons. The function-like
spelling is perhaps better for indicating that curcpu is volatile (unlike
curthread), but for CPU attributes volatility is a feature.
The SCHEDULER_STOPPED() hack breaks locking generally, and
mtx_trylock_*() especially. When mtx_trylock_*() returns nonzero,
naive code version here trusts it to have worked. But when
SCHEDULER_STOPPED() is true, mtx_trylock_*() returns 1 without doing
anything. Then mtx_unlock_*() crashes especially badly attempting to
unlock iff the error is detected, since mutex unlocking functions don't
check SCHEDULER_STOPPED().
syscons already didn't trust mtx_trylock_spin(), but it was missing the
logic to turn on sp->kdb_locked when turning off sp->mtx_locked during
panics. It also used panicstr instead of SCHEDULER_LOCKED because I
thought that panicstr was more fragile. They only differ for a window
of lines in panic(), and in broken cases where stop_cpus_hard() in panic()
didn't work.
I want to do this change because this call (actually,
AcpiHwLegacyWakePrep) does a memory allocation and ACPI namespace
evaluation. Although it is not very likely to run into any trouble, it
is still not safe to make those calls with interrupts disabled.
witness(4) and malloc(9) do not currently check for a context with
interrupts disabled via intr_disable and we lack a facility for doing
that. So, those unsafe operations fly under the radar. But if
intr_disable in acpi_EnterSleepState was replaced with spinlock_enter
(which it probably should be), then witness and malloc would immediately
complain.
Also, AcpiLeaveSleepStatePrep is documented as called when interrupts
are enabled. It used to require disabled interrupts, but that
requirement was changed a long time ago when support for _BFS and _GTS
was removed from ACPICA.
The ACPI wakeup sequence is very sensitive to changes. I consider this
change to be correct, but there can be fallouts from it.
What AcpiHwLegacyWakePrep essentially does is writing a value
corresponding to S0 into SLP_TYPx bits of PM1 Control Register(s).
According to ACPI specifications that write should be a NOP as SLP_EN
bit is not set. But I see in some chipset specifications that they
allow to ignore SLP_EN altogether and to act on a change of SLP_TYPx
alone.
Also, there are a couple of accesses to ACPI hardware before the new
location of the call to AcpiLeaveSleepStatePrep. One is to clear the
power button status and the other is to enable SCI. So, the move may
affect the interaction between then OS and ACPI platform.
I have not seen any regressions on my test system, but it's a desktop.
MFC after: 5 weeks
Intel now provides comprehensive tables for all performance counters
and the various valid configuration permutations as text .json files.
Libpmc has been converted to use these and hwpmc_core has been greatly
simplified by moving to passthrough of the table values.
The one gotcha is that said tables don't support pentium pro and and pentium
IV. There's very few users of hwpmc on _amd64_ kernels on new hardware. It is
unlikely that anyone is doing low level optimization on 15 year old Intel
hardware. Nonetheless, if someone feels strongly enough to populate the
corresponding tables for p4 and ppro I will reinstate the files in to the
build.
Code for the K8 counters and !x86 architectures remains unchanged.
- move harvest mask check inline
- move harvest mask to frequently_read out of actively
modified cache line
- disable ether_input collection and describe its limitations
in NOTES
Typically entropy collection in ether_input was stirring zero
in to the entropy pool while at the same time greatly reducing
max pps. This indicates that perhaps we should more closely
scrutinize how much entropy we're getting from a given source
as well as what our actual entropy collection needs are for
seeding Yarrow.
Reviewed by: cem, gallatin, delphij
Approved by: secteam
Differential Revision: https://reviews.freebsd.org/D15526
bhyve's root PCI complex shows up as PCIe, but behaves as traditional PCI.
Until that is special cased in a root complex driver, leave x86 as it was.
Requested by: grehan
for a port. Fix other related issues while here:
- Require port lock for access to link_config.
- Allow 100Mbps operation by tracking the speed in Mbps. Yes, really.
- New port flag to indicate that the media list is immutable. It will
be used in future refinements.
This also fixes a bug where the driver reports incorrect media with
recent firmwares.
MFC after: 2 days
Sponsored by: Chelsio Communications
overscan and synthesize it from the display depth and screen width.
This may not be right, but it sometimes right and is better than
returning CN_DEAD.
Summary:
PCIe only permits 1 device on an endpoint, so some devices ignore the device
part of B:D:F probing. Although ARI likely fixes this, not all platforms
support ARI completely or correctly, so some devices end up showing up 32
times on the bus.
This was found during bringup of POWER9/Talos, and has been tested on POWER9
and POWER8 hardware.
Reviewed by: leitao
Differential Revision: https://reviews.freebsd.org/D15461
many excluded regions causing a buffer overflow in the early boot code if
this value is too small.
Obtained from: ABT Systems Ltd
Sponsored by: Turing Robotic Industries
This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-initialize
their hardware after suspend (e.g., because firmware does not care to do
it) will implement cn_resume. Note that it is called in rather early
environment not unlike early boot, so the same restrictions apply.
Platform specific code, for platforms that support hardware suspend,
should call cnresume early after resume, before any console output is
expected.
This change fixes a problem with a system of mine failing to resume when
a serial console is used. I found that the serial port was in a strange
configuration and an attempt to write to it likely resulted in an
infinite loop.
To avoid adding cn_resume method to every console driver, CONSOLE_DRIVER
macro has been extended to support optional methods.
Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15552
Add USB product ID for two GENESYS LOGIC ICs, found in DELOCK
In-Desk-Hub 61991
PR: 228489
Submitted by: "Harald Schmalzbauer" <bugzilla.freebsd@omnilan.de>
MFC After: 3 weeks
The hardware rate limiting feature is enabled by the RATELIMIT kernel
option. Please refer to ifconfig(8) and the txrtlmt option and the
SO_MAX_PACING_RATE set socket option for more information. This
feature is compatible with hardware transmit send offload, TSO.
A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to
setup the ratelimit table and also to fine tune various rate limit
related parameters.
Sponsored by: Mellanox Technologies
The GMII control bit ETH_MAC_CR_GMII_EN_ is not documented in
LAN78xx datasheets, but from the permissively licensed header provided
by Microchip it is:
#define ETH_MAC_CR_GMII_EN (0x00080000UL ) // GMII/RGMII Selection
is that current one (mass storage device) doesn't work as it is - it
needs to be set to 0 after the LUN is configured, which is what the
cfumass rc script does. In other words: the current default does not
work, and to actually make it work it had to be set to -1 in
/boot/loader.conf.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Add support for Leadtek WinFast Tv2000 XP bktr card
- Add support for PHILIPS FI1216
PR: 94369
Submitted by: Angelescu Ovidiu <mrhsaacdoh@yahoo.com>
Submitted on: 2006-03-11 19:30 UTC
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
vendor provided pmu-events tables and sundry cleanups.
The vendor pmu-events tables provide counter descriptions, default
sample rates, event, umask, and flag values for all the counter
configuration permutations. Using this gives us:
- much simpler kernel code for the MD component
- helpful long and short event descriptions
- simpler user code
- sample rates that won't overload the system
Update man page with newer sample types and remove unused sample type.
Squashed commit of the following:
commit 4459d43eff815bec08ccc5533dbe5de846f03128
Author: Matt Macy <mmacy@mattmacy.io>
Date: Sat May 26 00:06:31 2018 -0700
libpmc: fix pmu function signatures for non amd64
commit a2cb8bbc586c65d41f9b291430a2261ec67b59fe
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:38:11 2018 -0700
pmcstat: fix indentation of usage
commit f686954b15ff56a833ac80404898977cb80a265b
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:49 2018 -0700
pmclog(3): add callchain and pmcallocatedyn, remove pcsample
commit 73e13a0d2e9498c81c150d14d022050cee7511bb
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:19:00 2018 -0700
pmclog.h: GC pcsample field
commit 3e93ffd65da641fa657539dad3c48e281f8b5798
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:05:57 2018 -0700
hwpmc: make Intel core CPUs use external event tables
commit 634f5fae1e1644ac324003136c66cd9c619d1c93
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 22:00:06 2018 -0700
pmclog: update log record types, bump PMC_MAJOR
- explicitly make log record types a multiple of 8 bytes
- hook in pmu event types for pmc_allocate records
- remove references to no longer PCSAMPLE record
commit 83d84fcd2d65bdf6ddcb2e155a22f0cfa2a9c225
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 21:52:10 2018 -0700
libpmc: add support for having vendor table driven pmc_allocate
commit 9e6ad63c40c2fce8404847ace5078ca6cb33a736
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:11:33 2018 -0700
hwpmc_core: add accessors for EVSEL & UMASK, make IAP_UMASK useful to user
commit 859dceb93daa6419a48c794db99b6758e5b041c9
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 19:09:45 2018 -0700
pmcstat: update usage and man page as well as make -L consistent with pmccontrol
commit 79c7d8597e28c2eb13f5f9113e65ec2792ca57b1
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 18:07:03 2018 -0700
pmu_util: add support for all current intel event keywords
commit d8089c7f6a6c8527f38324252b1ffb47004694c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:45:00 2018 -0700
add description for new arguments
commit 058336740bab53c62ec88a3a026ea848cf3878c6
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 17:38:15 2018 -0700
libpmc: move pmu_events table and pmu_utils out of libpmcstat so that they can be used by pmc_allocate
commit 049b66b382e2f833c3f47bc8df9e750cb265709f
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:12:41 2018 -0700
pmcstat: hook pmu_events counter description utility routines in
commit f5e01e7b37a691dc045e1aa16b3ebdd162515de8
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:11:59 2018 -0700
pmu_events: add utility routines for listing counters and their descriptions
commit cba4d4f8907f772279f86f18f915e0d74d33ac56
Author: Matt Macy <mmacy@mattmacy.io>
Date: Fri May 25 16:09:50 2018 -0700
pmu-events: expand out skylake regex to simplify string matches
omcast was used without being initialized in the non-multicast case.
The only effect was that the interface's multicast output counter could be
incorrect.
Reported by: Coverity
CID: 1379662
MFC after: 3 days
Sponsored by: Dell EMC
Since GENERIC includes quite a few drivers now, all MMC drivers should have
appropriate MMCCAM-related ifdefs and include opt_mmccam.h so that
those ifdefs are actually processed correctly.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15569
Previously lan78xx_chip_init locked the driver's mutex if not already
locked, but unlocked it only in the case of error. This provided a
fairly clear indication that the function is already called with the
lock held, so just replace it with a lock assertion.
Sponsored by: The FreeBSD Foundation
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
- Remove layering violation, when NVMe SIM code accessed CAM internal
device structures to set pointers on controller and namespace data.
Instead make NVMe XPT probe fetch the data directly from hardware.
- Cleanup NVMe SIM code, fixing support for multiple namespaces per
controller (reporting them as LUNs) and adding controller detach support
and run-time namespace change notifications.
- Add initial support for namespace change async events. So far only
in CAM mode, but it allows run-time namespace arrival and departure.
- Add missing nvme_notify_fail_consumers() call on controller detach.
Together with previous changes this allows NVMe device detach/unplug.
Non-CAM mode still requires a lot of love to stay on par, but at least
CAM mode code should not stay in the way so much, becoming much more
self-sufficient.
Reviewed by: imp
MFC after: 1 month
Sponsored by: iXsystems, Inc.
I'm in the process of reworking how the reset path works with an eye
to better recovery when the chips hang and/or go RF/PHY deaf.
This is the first step in a lot of unification and API changes.
It was introduced to the tree in r169320 and r169321 in May 2007.
It never got much use and never became a kernel default. The code
duplicates the default path quite a bit, with slight modifications. Just
yank out the cruft. Whatever goals were being aimed for can probably be met
within the existing framework, without a flag day option.
Mostly mechanical change: 'unifdef -m -UINTR_FILTER'.
Reviewed by: mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15546
This driver was developed for the LAN7800 and the register-compatible
LAN7515 and has only been tested on those devices. Adding support for
other members of the family should be straightforward, once we have
devices to test.
With this change the driver will probe but fail to attach due to the
Chip ID check, but will leave a hint leading to the driver that needs
work.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15537
Remove the device from the list before unbinding it. Doing it in this
order allows calling xen_intr_unbind without holding the bind_mutex
lock.
Sponsored by: Citrix Systems R&D
There's no need to perform the interrupt unbind while holding the
blkback lock, and doing so leads to the following LOR:
lock order reversal: (sleepable after non-sleepable)
1st 0xfffff8000802fe90 xbbd1 (xbbd1) @ /usr/src/sys/dev/xen/blkback/blkback.c:3423
2nd 0xffffffff81fdf890 intrsrc (intrsrc) @ /usr/src/sys/x86/x86/intr_machdep.c:224
stack backtrace:
#0 0xffffffff80bdd993 at witness_debugger+0x73
#1 0xffffffff80bdd814 at witness_checkorder+0xe34
#2 0xffffffff80b7d798 at _sx_xlock+0x68
#3 0xffffffff811b3913 at intr_remove_handler+0x43
#4 0xffffffff811c63ef at xen_intr_unbind+0x10f
#5 0xffffffff80a12ecf at xbb_disconnect+0x2f
#6 0xffffffff80a12e54 at xbb_shutdown+0x1e4
#7 0xffffffff80a10be4 at xbb_frontend_changed+0x54
#8 0xffffffff80ed66a4 at xenbusb_back_otherend_changed+0x14
#9 0xffffffff80a2a382 at xenwatch_thread+0x182
#10 0xffffffff80b34164 at fork_exit+0x84
#11 0xffffffff8101ec9e at fork_trampoline+0xe
Reported by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
The user-space xenstore device is currently lacking a check to make
sure that the caller is only using transaction ids currently assigned
to it. This allows users of the xenstore device to hijack transactions
not started by them, although the scope is limited to transactions
started by the same domain.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
This is hardware support for the SO_MAX_PACING_RATE sockopt (see
setsockopt(2)), which is available in kernels built with "options
RATELIMIT".
Relnotes: Yes
Sponsored by: Chelsio Communications
Allow user-space applications to register watches using the xenstore
device. This is needed in order to run toolstack operations on
domains different than the one where xenstore is running (in which
case the device is not used, since the connection to xenstore is done
using a plain socket).
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
Due to the current synchronous xenstore implementation in FreeBSD, we
cannot return from xs_read_reply without reading a reply, or else the
ring gets out of sync and the next request will read the previous
reply and crash due to the type mismatch. A proper solution involves
making use of the req_id field in the message and allowing multiple
in-flight messages at the same time on the ring.
Remove the PCATCH flag so that signals don't interrupt the wait.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
There's no need to prevent suspend while doing xenstore transactions,
callers of transactions are supposed to be prepared for a transaction
to fail.
This fixes a bug that could be triggered from the xenstore user-space
device, since starting a transaction from user-space would result in
returning there with a sx lock held, that causes a WITNESS check to
trigger.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
According to PR there are cases of controller hang if soft reset is
sent before device report ready status after the hard reset.
I don't think this patch is perfect, but it was reported as working
by the submitter, and I have neither the old hardware nor interest to
test some improved version, so just done some style cleaning.
PR: 183294
Submitted by: alexandre.martins@netasq.com
MFC after: 1 month
This driver was developed for the LAN7800 and the register-compatible
LAN7515 (found on Raspberry Pi 3B+) and has only been tested on those
devices.
Sponsored by: The FreeBSD Foundation
We shouldn't be mapping this memory, so we need to find it so it
can be excluded from the phys_avail map.
Reviewed by: manu
Obtained from: ABT Systems Ltd
Sponsored by: Turing Robotic Industries
Differential Revision: https://reviews.freebsd.org/D15518
This apparently works around issues with updates of certain Broadwell
CPUs.
Reviewed by: emaste, kib, sbruno
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15520
Linux will not connect to a backend that's in state 3
(XenbusStateInitialised), it needs to be in state 2
(XenbusStateInitWait) for Linux to attempt to connect to the backend.
The protocol seems to suggest that the backend should indeed wait in
state 2 for the frontend to connect, which makes state 3 unusable for
disk backends.
Also make sure blkback will connect to the frontend if the frontend
reaches state 3 (XenbusStateInitialised) before blkback has processed
the results from the hotplug script (Submitted by Nathan Friess).
MFC after: 1 week
Speculative Store Bypass (SSB) is a speculative execution side channel
vulnerability identified by Jann Horn of Google Project Zero (GPZ) and
Ken Johnson of the Microsoft Security Response Center (MSRC)
https://bugs.chromium.org/p/project-zero/issues/detail?id=1528.
Updated Intel microcode introduces a MSR bit to disable SSB as a
mitigation for the vulnerability.
Introduce a sysctl hw.spec_store_bypass_disable to provide global
control over the SSBD bit, akin to the existing sysctl that controls
IBRS. The sysctl can be set to one of three values:
0: off
1: on
2: auto
Future work will enable applications to control SSBD on a per-process
basis (when it is not enabled globally).
SSBD bit detection and control was verified with prerelease microcode.
Security: CVE-2018-3639
Tested by: emaste (previous version, without updated microcode)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
This change adds support for a UBS<->RS232 adapter based on CH340 (or an
analogue) that I own. The device seems to have a newer internal version
(0x30) and the existing code incorrectly configures line control for it
resulting in garbled transmission. The changes are based on what I
learned in Linux drivers for the same hardware.
Additional changes:
- use UCHCOM_REG_LCR1 / UCHCOM_REG_LCR2 instead of explicit 0x18 and
0x25
- use NULL instead of 0 where a pointer is expected
Reviewed by: hselasky
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15498
Also, add definitions for more bits of UCHCOM_REG_LCR1 as seen in the
Linux driver. UCHCOM_LCR1_PARENB definition was different from that in
the Linux driver and clashed with newly added UCHCOM_LCR1_RX. I took a
liberty to change UCHCOM_LCR1_PARENB to the Linux definition as it was
unused in the driver anyway. This change should make
uchcom_cfg_set_break() easier to understand.
Approved by: hselasky
MFC after: 2 weeks
