- Add a basic iomux driver for imx6.
- Implement the same public interface in imx51 and imx6 iomux
- The iomux driver is no longer optional, remove it from kernel configs.
- Implement the imx_iomux_get/set_gpr() interface for imx6.
- Stop setting the iomux device status to disabled, now that we have a driver.
o Enable GPIO device driver for i.MX6.
It was originally written for i.MX5 and compatible with newer chip.
o Extend device tree information
o style(9) fixes
o Rename gpio driver file.
Announce SCTP support in the kern.features sysctl variables.
MFC r270859:
Enable SCTP support. It runs perfectly fine on a Wandboard quad.
MFC r271204 with manual intervention:
Fix the handling of sysctl variables when used with VIMAGE.
While there do some cleanup of the code.
MFC r271209:
Fix a leak of an address, if the address is scheduled for removal
and the stack is torn down.
Thanks to Peter Bostroem and Jiayang Liu from Google for reporting the
issue.
MFC r271219:
Use SYSCTL_PROC instead of SYSCTL_VNET_PROC.
Suggested by: glebius@
MFC r271221:
Use union sctp_sockstore instead of struct sockaddr_storage. This
eliminates some warnings when building in userland.
Thanks to Patrick Laimbock for reporting this issue.
Remove also some unnecessary casts.
There should be no functional change.
MFC r271228:
Address another warnings reported by Patrick Laimbock when compiling
in userspace. While there, improve consistency.
MFC r271230:
Address warnings generated by the clang analyzer.
Approved by: re (kib)
In kernel config files, it is supposed to be 'options<space><tab>' not
'options<tab><tab>', per long standing (but recently not so strictly
enforced) convention.
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950
Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.
Move all the files named foo/common.c to foo/foo_common.c
Initial cut for DTS on the hl201 board.
Add commented out dts for sam9260ek as well as early printf support.
Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")
Set the baud rate if it isn't 0
Make at91_soc_id() public.
Properly round at91 resource on unmapping.
Move AT91 AIC related stuff to own file.
Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.
Follow r262916 with one more config file that references a renamed common.c
Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...
Remove all dregs of a per-thread undefined-exception-mode stack.
Rework the VFP code that handles demand-based save and restore of state.
Always call vfp_discard() on thread death.
When a thread begins life it doesn't own the VFP hardware state on any cpu.
Make undefined exception entry MP-safe.
262885, 262891, 262903,
imx6: Add a tunable to set the number of active cores, enable SMP by default.
ffec: Fix multicast filtering.
Allwinner a10/a20...
- Add gpio and clock bits for A10/A20's EMAC ethernet controller driver
- EMAC gpio configuration
- EMAC clock activation
- Add Static Random Access Memory controller driver for A10/A20.
A10/A20's SRAM is used by devices, such as CPU, EMAC,
for extra fast memory or as cache.
- Add EMAC 10/100 Ethernet controller driver for A10/A20.
It is available mostly in A10 devices like Hackberry, Marsboard,
Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device
like cubieboard2.
TX performance can be improved using both channels 0 and 1.
RX performance is poor and needs improvement with the assistance of
external DMA controller in case there
- Add EMAC and SRAM controller entries to FDT.
- Add EMAC device to kernel config files and enable EMAC, SRAM drivers.
OMAP: When calculating the MPU freq, make sure not to overflow.
Vybrid:
- Add driver for Port control and interrupts (PORT).
- Export panel info to DTS
- Reset all the layers before setup first one
- Enable display
nandfs: Slight code reordering to make error branch last.
Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs
that have it individually. Concensus on freebsd-arm@ is that it should
be included in all ARM kernels.
Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a
struct sigframe containing the struct ucontext.
r262355, r262419,
Add Vybrid driver for Synchronous Audio Interface (SAI).
Decrease SAI buffer size. Handle eDMA interrupt on running channel only.
Give the physmem fdt helper routines static linkage since no global
definition of them is provided anywhere.
Add imx6 early printf support, wrapped in #if 0 because it's rarely needed.
Add basic cpu frequency control and temperature monitoring to imx6_anatop.
Add the FREEBSD_BOOT_LOADER option so that a loaded DTB passed in from
ubldr will actually get used.
Create a generic IMX6 kernel config, then fix it to have an ident line.
Don't force imx6 bootverbose on anymore, it can be set from ubldr now.
