Commit Graph

145406 Commits

Author SHA1 Message Date
David Schultz
ce5c3df1b2 Fix a file descriptor leak in fts_child().
Obtained from:	NetBSD
2009-03-04 03:30:21 +00:00
Bruce M Simpson
346e3178ea Merge header file definitions used by the new IGMPv3 implementation.
This is a partial merge. Compatibility defines are retained for
the existing IGMPv2 implementation.
2009-03-04 03:22:03 +00:00
Bruce M Simpson
b554b6ca91 Add various defines/macros required by IGMPv3:
* MCAST_UNDEFINED state.
 * in_allhosts() macro (group is 224.0.0.1).
   This uses a const endian comparison.
 * IP_MAX_GROUP_SRC_FILTER, IP_MAX_SOCK_SRC_FILTER
   default resource limits.
2009-03-04 03:01:05 +00:00
Bruce M Simpson
a96a4bbcf0 Overlay a uint16_t field suitable for use by the
IGMPv3 code. It is used to maintain the number of
group records contained in a pending IGMPv3 output
mbuf chain.
2009-03-04 02:55:04 +00:00
Bruce M Simpson
1e98b429fe Reserve a netisr slot for the IGMPv3 output queue. 2009-03-04 02:54:11 +00:00
Bruce M Simpson
f0dcb78326 Add function ip_checkrouteralert(), which will be used
by IGMPv3 to check for the IPv4 Router Alert [RFC2113]
option in a pulled-up IP mbuf chain.
2009-03-04 02:51:22 +00:00
Bruce M Simpson
3c0f8ff528 Add printb.c utility file, but do not yet connect it to the build. 2009-03-04 02:12:29 +00:00
Bruce M Simpson
4ab1345938 Add full SSM stack support to mtest(8) diagnostic tool. 2009-03-04 02:09:12 +00:00
Bruce M Simpson
7637b2eec3 Update mtest(8) manual page. 2009-03-04 02:08:20 +00:00
Bruce M Simpson
2fb1aecaed Add cross-reference to sourcefilter(3). 2009-03-04 02:00:34 +00:00
Bruce M Simpson
108ad5bd51 Add source-specific multicast (SSM) option documentation. 2009-03-04 02:00:14 +00:00
Bruce M Simpson
1acf7fcc63 Considerably improve the wording of this man page. 2009-03-04 01:59:14 +00:00
Bruce M Simpson
0c0fdcfe15 Update copyright. 2009-03-04 01:58:48 +00:00
Pyun YongHyeon
8afdb6983e Make ifinfo build. The struct if_data members ifi_recvquota and
ifi_xmitquota were renamed to ifi_spare_char1 and ifi_spare_char2
respectively.
2009-03-04 01:31:09 +00:00
Xin LI
eb3144b210 Explicitly specify bit width for on-disk data structure.
Obtained from:	OpenBSD
2009-03-04 01:17:05 +00:00
Xin LI
d170190aa8 Sync license changes.
Obtained from:	NetBSD
2009-03-04 01:01:26 +00:00
Xin LI
3df1d93483 Style changes (including additional casts to shut up warnings). This
commit does not affect MD5 of object file.
2009-03-04 00:58:04 +00:00
David Christensen
725e9bc78c - Updated firmware to latest 4.6.X release.
- Added missing firmware for 5709 A1 controllers.
- Changed some debug statistic variable names to be more consistent.

Submitted by:	davidch
MFC after:	Two weeks
2009-03-04 00:05:40 +00:00
Bjoern A. Zeeb
71712ed6a6 For the moment disable the VIMAGE_CTASSERTs as people have trouble
while developing and compiling with kernel options that change the
size of at least one structure. The current kernel build framework
does not allow us to pass -Dxxx to module builds so we would possibly
need a kernel option to disable the checks and that might not work
for people just building modules alone.

For now they helped to identify possibly API problems and bring
those back into minds of developers seeking for better solutions.

Problems reported by:	kib, warner
Reviewed by:		warner
2009-03-03 19:38:56 +00:00
Warner Losh
5c0691d91a make loop clearer that it isn't a mistake... 2009-03-03 19:22:24 +00:00
Warner Losh
96a31ac3e8 Add in parsing of the disk FUNCE tuples. 2009-03-03 18:57:59 +00:00
Warner Losh
f987621403 The callback takes a void *, not a caddr_t * (sic).
Except for the bb callback, which takes a caddr_t and not a caddr_t *.
2009-03-03 18:54:57 +00:00
Warner Losh
e0a04e7474 Bump down the inline limit on MIPS. 2009-03-03 18:53:47 +00:00
Ed Schouten
60d234c583 Make Netgraph compile with Clang.
Clang disallows structs with variable length arrays to be nested inside
other structs, because this is in violation with ISO C99. Even though we
can keep bugging the LLVM folks about this issue, we'd better just fix
our code to not do this. This code seems to be the only code in the
entire source tree that does this.

I haven't tested this patch by using the kernel modules in question, but
Diane Bruce and I have compared disassembled versions of these kernel
modules. We would have expected them to be exactly the same, but due to
randomness in the register allocator and reordering of instructions,
there were some minor differences.

Approved by:	julian
2009-03-03 18:47:33 +00:00
Robert Watson
5e713d3db4 Adding missing ";"'s required by some SDT_PROBE_DEFINEx() macros.
MFC after:	1 week
2009-03-03 18:23:16 +00:00
Dmitry Chagin
b2421c29f6 as suggested by jhb@, panic in case the ncpus == 0.
it helps to catch bugs in the callers.

Approved by:	kib (mentor)
MFC after:	5 days
2009-03-03 17:34:09 +00:00
Robert Watson
73e416e35d Reduce the verbosity of SDT trace points for DTrace by defining several
wrapper macros that allow trace points and arguments to be declared
using a single macro rather than several.  This means a lot less
repetition and vertical space for each trace point.

Use these macros when defining privilege and MAC Framework trace points.

Reviewed by:	jb
MFC after:	1 week
2009-03-03 17:15:05 +00:00
Tim Kientzle
9c886c4181 Merge r340 from libarchive.googlecode.com: If zlib/bzlib aren't available,
we can still detect gzip/bzip2 compressed streams, we just can't
decompress them.
2009-03-03 17:07:27 +00:00
Tim Kientzle
690f818afd Merge r294:337,r348:350 from libarchive.googlecode.com: A lot
of work to make libarchive work on Windows.
2009-03-03 17:02:51 +00:00
John Baldwin
6b0ff427a5 Further refine the handling of resources for BARs in the PCI bus driver.
A while back, Warner changed the PCI bus code to reserve resources when
enumerating devices and simply give devices the previously allocated
resources when they call bus_alloc_resource().  This ensures that address
ranges being decoded by a BAR are always allocated in the nexus0 device
(or whatever device the PCI bus gets its address space from) even if a
device driver is not attached to the device.  This patch extends this
behavior further:
- To let the PCI bus distinguish between a resource being allocated by
  a device driver vs. merely being allocated by the bus, use
  rman_set_device() to assign the device to the bus when it is owned
  by the bus and to the child device when it is allocated by the child
  device's driver.  We can now prevent a device driver from allocating
  the same device twice.  Doing so could result in odd things like
  allocating duplicate virtual memory to map the resource on some
  archs and leaking the original mapping.
- When a PCI device driver releases a resource, don't pass the request
  all the way up the tree and release it in the nexus (or similar device)
  since the BAR is still active and decoding.  Otherwise, another device
  could later allocate the same range even though it is still in use.
  Instead, deactivate the resource and assign it back to the PCI bus
  using rman_set_device().
- pci_delete_resource() will actually completely free a BAR including
  attemping to disable it.
- Disable BAR decoding via the command register when sizing a BAR in
  pci_alloc_map() which is used to allocate resources for a BAR when
  the BIOS/firmware did not assign a usable resource range during boot.
  This mirrors an earlier fix to pci_add_map() which is used when to
  size BARs during boot.
- Move the activation of I/O decoding in the PCI command register into
  pci_activate_resource() instead of doing it in pci_alloc_resource().
  Previously we could actually enable decoding before a BAR was
  initialized via pci_alloc_map().

Glanced at by:	bsdimp
2009-03-03 16:38:59 +00:00
Andriy Gapon
d38d0090c0 ichwd: correct range check for timeout value
Approved by:	jhb (mentor)
2009-03-03 15:50:24 +00:00
Bjoern A. Zeeb
1263305f0c Start removing IPv6 Type 0 Routing header code.
RH0 was deprecated by RFC 5095.

While most of the code had been disabled by #if 0 already, leave a
bit of infrastructure for possible RH2 code and a log message under
BURN_BRIDGES in case a user still tries to send RH0 packets.

Reviewed by:	gnn (a bit back, earlier version)
2009-03-03 13:12:12 +00:00
Andriy Gapon
ff9e355b51 udf_readdir: do not advance offset if entry can not be uio-ed
Previosly readdir missed some directory entries because there was
no space for them in current uio but directory stream offset
was advanced nevertheless.
jhb has discoved the issue and provided a test-case.

Reviewed by:	bde
Approved by:	jhb (mentor)
2009-03-03 13:10:25 +00:00
Robert Watson
ec14812cf5 Update config.h for OpenBSM 1.1 beta1.
MFC after:	1 month
2009-03-03 11:57:29 +00:00
Yoshihiro Takahashi
1a598e6201 Catch up with USB2 change.
Remove the usbdevs and add the usbconfig.

Spotted by:     hrs
Tested on:      i386
2009-03-03 09:04:18 +00:00
Christian Brueffer
004da5adcb Xref glxsb(4).
MFC after:	3 days
2009-03-03 07:58:01 +00:00
Tim Kientzle
ed466ea1cf Merge r294 from libarchive.googlecode.com: Skip testing for
locale-based failures on systems where the "C" locale is so permissive
that it cannot possibly fail.  In particular, this fixes a test
problem on Cygwin.
2009-03-03 07:01:57 +00:00
Alexander Motin
3a51cb7912 Set PortMultiplier port only for SATA2 channels, where it is applicable.
Doing it on old SATA controllers like Promise PDC20375 SATA150 breaks
their operation.

Tested by:	marcus on PDC20375
2009-03-03 06:39:38 +00:00
Tim Kientzle
bc14277c79 Merge r282 from libarchive.googlecode.com: Close multiple filters
by walking the filter list in archive_read_close().
2009-03-03 03:33:25 +00:00
Tim Kientzle
80bb6bf259 Merge r272 from libarchive.googlecode.com: Fix building on MSVC6. 2009-03-03 03:28:09 +00:00
Xin LI
4c66e4b64b Rename variable 'index' to 'idx' to avoid name collision with index(3),
this commit does not affect any object code.

Obtained from:	OpenBSD
Verified with:	md5(1)
2009-03-03 02:16:12 +00:00
Xin LI
0ac22237f1 Diff reduction against OpenBSD: ANSI'fy prototypes.
(This is part of a larger changeset which is intended to reduce diff only,
thus some prototypes were left intact since they will be changed in the
future).

Verified with:	md5(1)
2009-03-02 23:47:18 +00:00
Jamie Gritton
f86bce5ed0 Extend the "vfsopt" mount options for more general use. Make struct
vfsopt and the vfs_buildopts function public, and add some new fields
to struct vfsopt (pos and seen), and new functions vfs_getopt_pos and
vfs_opterror.

Further extend the interface to allow reading options from the kernel
in addition to sending them to the kernel, with vfs_setopt and related
functions.

While this allows the "name=value" option interface to be used for more
than just FS mounts (planned use is for jails), it retains the current
"vfsopt" name and <sys/mount.h> requirement.

Approved by:	bz (mentor)
2009-03-02 23:26:30 +00:00
Luigi Rizzo
ac6bb60e0a curr_time is a 64 bit variable so SYSCTL_LONG is not appropriate
as a handler.
The variable was exported only for debugging, but there is little reason
to do it now that the timekeeping is supported by various other variables.
For the time being just comment out the sysctl, but I think this
should go away.
2009-03-02 22:16:50 +00:00
Luigi Rizzo
0906f40fd8 fw_debug has been unused for ages, so remove it from the list
of sysctl_variables.
I would also remove it from the VNET record but I am unsure if
there is any ABI issue -- so for the time being just mark it as
unused in ip_fw.h, and then we will collect the garbage at some
appropriate time in the future.

MFC after:	3 days
2009-03-02 22:11:48 +00:00
Alexander Kabaev
5ab4bb35fb Change vfs_busy to wait until an outcome of pending unmount
operation is known and to retry or fail accordingly to that
outcome. This fixes the problem with namespace traversing
programs failing with random ENOENT errors if someone just
happened to try to unmount that same filesystem at the same
time.

Reported by:	dhw
Reviewed by:	kib, attilio
Sponsored by:	Juniper Networks, Inc.
2009-03-02 20:51:39 +00:00
Christian S.J. Peron
f32b457b6e Switch the default buffer mode in bpf(4) to zero-copy buffers.
Discussed with:	rwatson
2009-03-02 19:42:01 +00:00
Robert Noland
5884a846e7 Disable INTx when enabling MSI/MSIX
This addresses interrupt storms that were noticed after enabling MSI
in drm.  I think this is due to a loose interpretation of the PCI 2.3
spec, which states that a function using MSI is prohibitted from using
INTx.  It appears that some vendors interpretted that to mean that they
should handle it in hardware, while others felt it was the drivers
responsibility.

This fix will also likely resolve interrupt storm related issues with
devices other than drm.

Reviewed by:	jhb@
MFC after:	3 days
2009-03-02 19:00:41 +00:00
Konstantin Belousov
65067cc8b0 Correct types of variables used to track amount of allocated SysV shared
memory from int to size_t. Implement a workaround for current ABI not
allowing to properly save size for and report more then 2Gb sized segment
of shared memory.

This makes it possible to use > 2 Gb shared memory segments on 64bit
architectures. Please note the new BUGS section in shmctl(2) and
UPDATING note for limitations of this temporal solution.

Reviewed by:	csjp
Tested by:	Nikolay Dzham <i levsha org ua>
MFC after:	2 weeks
2009-03-02 18:53:30 +00:00
Konstantin Belousov
2883703e00 Use the p_sysent->sv_flags flag SV_ILP32 to detect 32bit process
executing on 64bit kernel. This eliminates the direct comparisions
of p_sysent with &ia32_freebsd_sysvec, that were left intact after
r185169.
2009-03-02 18:43:50 +00:00