Add back in a scheme to emulate old type major/minor numbers via hooks into
stat, linprocfs to return major/minors that Linux app's expect. Currently
only /dev/null is always registered. Drivers can register via the Linux
type shim similar to the ioctl shim but by using
linux_device_register_handler/linux_device_unregister_handler functions.
The structure is:
struct linux_device_handler {
char *bsd_driver_name;
char *linux_driver_name;
char *bsd_device_name;
char *linux_device_name;
int linux_major;
int linux_minor;
int linux_char_device;
};
Linprocfs uses this to display the major number of the driver. The
soon to be available linsysfs will use it to fill in the driver name.
Linux_stat uses it to translate the major/minor into Linux type values.
Note major numbers are dynamically assigned via passing in a -1 for
the major number so we don't need to keep track of them.
This is somewhat needed due to us switching to our devfs. MegaCli
will not run until I add in the linsysfs and mfi Linux compat changes.
Sponsored by: IronPort Systems
after ipsec4_output processing else KAME IPSec using the handbook
configuration with gif(4) will panic the kernel.
Problem reported by: t. patterson <tp lot.org>
Tested by: t. patterson <tp lot.org>
return NULL. In principle this shouldn't change the behavior, but
avoids returning a potentially invalid/inappropriate pointer to
the caller.
Found with: Coverity Prevent (tm)
Submitted by: pjd
MFC after: 3 months
functions not yet asserting it but working on global ip6_forward_rt
route cache which is not locked and perhaps should go away in the
future though cache hit/miss ration wasn't bad.
It's #if 0ed in frag6 because the code working on ip6_forward_rt is.
destination. These checks are needed so we do not install
a route looking like this:
(0) 192.0.2.200 UH tun0 =>
When removing this route the kernel will start to walk
the address space which looks like a hang on 64bit platforms
because it'll take ages while on 32bit you should see a panic
when kernel debugging options are turned on.
The problem is in rtrequest1:
if (netmask) {
rt_maskedcopy(dst, ndst, netmask);
} else
bcopy(dst, ndst, dst->sa_len);
In both cases the len might be 0 if the application forgot to
set it. If so ndst will be all-zero leading to above
mentioned strange routes.
This is an application error but we must not fail/hang/panic
because of this.
Looks ok: gnn
No objections: net@ (silence)
MFC after: 8 weeks
two places where g_io_request() is called. g_io_request() can free bio
structure so we can't reference it after and G_RAID3_FOREACH_BIO() macro
was doing this.
Found by: Coverity Prevent analysis tool (with my new models)
MFC after: 1 day
- Fix bfe_encap so that it will pass the address of the mbuf back up to its
caller if/when it modifies it, as it does when doing a m_defrag on a mbuf chain.
- Make sure to unload the dmamap for ALL fragments of a packet, not just the first
- Use BUS_DMA_NOWAIT for all bus_dmamap_load calls so that the allocation of the
map is not delayed - this driver is not set up to handle such delays.
- Reduce the number of RX and TX buffers bfe uses so that it does not use more
bounce buffers than busdma is willing to allow it to use
With these changes, the driver now works properly for a user with a 2GB system,
and it also works on my system when the acceptable address range is lowered to 128MB.
Previously, both of these setups would act up after a few minutes of activity.
from the amr_linux. This simplifies the amr_linux shim and puts the
smarts into amr.c.
I tested this with 2 amr controllers in one box. It seems to work
okay with them.
selection and not always beeping on startup. The two bytes for the extra
'jmp' instruction were obtained by removing recognition of BSD/OS
partitions.
Requested by: many
Tested by: subset of many
Head nod: imp, keramida
MFC after: 2 weeks
conformance with the mbuf and uio load routines. ENOMEM can only happen
with BUS_DMA_NOWAIT is passed in, thus the deferals are disabled. I don't
like doing this, but fixing this fixes assumptions in other important drivers,
which is a net benefit for now.
same time as it is changed back into a normal file. The locker would
get the shared "snaplk" lock which would no longer be the correct lock
for the vnode.
into its own function, udp6_append(). This mirrors a similar structure
in udp_input() and udp_append(), and makes the whole thing a lot more
readable.
While here, add missing inpcb locking in UDP6 input path.
Reviewed by: bz
MFC after: 3 months
to the unused kva in the pv memory block to thread a freelist through.
This allows us to free pages that used to be used for pv entry chunks
since we can now track holes in the kva memory block.
Idea from: ups
vn_start_write() is always called earlier in the code path and calling
the function recursively may lead to a deadlock.
Confirmed by: tegge
MFC after: 2 weeks
The packet filter may reassemble the ip fragments and return a packet that is
larger than the MTU of the sending interface. There is no check for DF or icmp
replies as we can only get a large packet to fragment by reassembling a
previous fragment, and this only happens after a call to pfil(9).
Obtained from: OpenBSD (mostly)
Glanced at by: mlaier
MFC after: 1 month
vn_finished_write() should also be called only then.
BTW. I fixed two functions here: vn_rdwr() and vn_write(). The latter seems
to be unused.
MFC after: 3 weeks
o Properly use rman(9) to manage resources. This eliminates the
need to puc-specific hacks to rman. It also allows devinfo(8)
to be used to find out the specific assignment of resources to
serial/parallel ports.
o Compress the PCI device "database" by optimizing for the common
case and to use a procedural interface to handle the exceptions.
The procedural interface also generalizes the need to setup the
hardware (program chipsets, program clock frequencies).
o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
default and non-serdev devices are handled by the bus.
o Use the serdev I/F to collect interrupt status and to handle
interrupts across ports in priority order.
o Sync the PCI device configuration to include devices found in
NetBSD and not yet merged to FreeBSD.
o Add support for Quatech 2, 4 and 8 port UARTs.
o Add support for a couple dozen Timedia serial cards as found
in Linux.
OS dependent layer. Thus, the watchdog timer can go off when the tx
engine is working fine but the OS dependent layer just hasn't been called
to cleanup finished tx transactions. To workaround this, when the watchdog
fires, poke the binary blob to force it to flush any pending tx
completions. If this drops the pending tx count to zero then just return
without logging a message or resetting the chip.
This reportedly fixes the 'device timeout()' errors with at least several
NF4 nve(4) parts.
Submitted by: Nathan Alexander Whitehorn <nathanw@uchicago.edu> (code)
Submitted by: dg (inspiration for comment and explanation)
MFC after: 1 week
stations that are associated by making ieee80211_find_txnode return
NULL when a unicast frame is to be delivered to an unassociated
station. This will be handled differently in the future but for
now putting the check here allows all drivers to immediately do
the right thing.
Reviewed by: avatar
MFC after: 1 week
Remove the code to dyanmically change the pv_entry limits. Go back
to a single fixed kva reservation for pv entries, like was done
before when using the uma zone. Go back to never freeing pages
back to the free pool after they are no longer used, just like
before.
This stops the lock order reversal due to aquiring the kernel map
lock while pmap was locked.
This fixes the recursive panic if invariants are enabled.
The problem was that allocating/freeing kva causes vm_map_entry
nodes to be allocated/freed. That can recurse back into pmap as
new pages are hooked up to kvm and hence all the problem.
Allocating/freeing kva indirectly allocate/frees memory.
So, by going back to a single fixed size kva block and an index,
we avoid the recursion panics and the LOR.
The problem is that now with a linear block of kva, we have no
mechanism to track holes once pages are freed. UMA has the same
problem when using custom object for a zone and a fixed reservation
of kva. Simple solutions like having a bitmap would work, but would
be very inefficient when there are hundreds of thousands of bits
in the map. A first-free pointer is similarly flawed because pages
can be freed at random and the first-free pointer would be rewinding
huge amounts. If we could allocate memory for tree strucures or
an external freelist, that would work. Except we cannot allocate/free
memory here because we cannot allocate/free address space to use
it in. Anyway, my change here reverts back to the UMA behavior of
not freeing pages for now, thereby avoiding holes in the map.
ups@ had a truely evil idea that I'll investigate. It should allow
freeing unused pages again by giving us a no-cost way to track the
holes in the kva block. But in the meantime, this should get people
booting with witness and/or invariants again.
Footnote: amd64 doesn't have this problem because of the direct map
access method. I'd done all my witness/invariants testing there. I'd
never considered that the harmless-looking kmem_alloc/kmem_free calls
would cause such a problem and it didn't show up on the boot test.
- Prevent possible live-lock in case of memory problems by freeing
already completed requests first.
Reported and tested by: markus, Bradley W. Dutton <brad-fbsd-stable@duttonbros.com>
MFC after: 1 day
- Comment possible event miss, which isn't critical, but probably can be
fixed by replacing the event lock usage with the queue lock.
MFC after: 2 weeks
POSTWRITE to POSTREAD.
No guarantee that all busdma is usage is perfect, but this change (in
addition to scott's last two commits) makes if_bfe work with > 1GB of
memory in my laptop.
OpenBSD changes. With these changes, PHY part of the driver becomes
functional (it senses media changes and negotiates speed just fine),
previously it just hang with no PHY message, but no data goes through
interface (error message is "can not stop transfer of Tx/Rx descriptor).
Hopefully somebody with more clue/free time will be able to pick up
after me.
buffers to go on the buf daemon's DIRTYGIANT queue.
- Set BO_NEEDSGIANT on ffs's devvp since the ffs_copyonwrite handler
runs in the context of the buf daemon and may require Giant.
than trying to optimize it into a single lock. This adds more calls to
lock giant with non smpsafe filesystems but is the only way to reliably
hold the correct lock.
- Remove an invalid assert in the mountedhere case in lookup and fix the
code to properly deal with the scenario. We can actually have a lookup
that returns dp == dvp with mountedhere set with certain unmount races.
Tested by: kris
Reported by: kris/mohans
Changelog towards if_iwi.c 1.26 (some changes have been committed separately
in the mean time):
- add led support
- add firmware loading on demand
- auto-restart firmware when it crashes
- serialize operations sent to the firmware to reduce firmware crashes
- add power save operation support
- remove incorrect specification of tx power control capability
- add radio on/off switch support
- improve net80211 state machine operation
- recognize and handle beacon miss
- handle authentication and association failures better
- add shared key authentication
- fix ibss mode (many changes)
- fix wme (many changes)
- correct radiotap support (many changes)
- correct bus dma setup of s/g
- correct various locking issues
- fix monitor mode
- fix scanning (many changes)
- recover from wedged scan requests
- respect active channel list
- eliminate cases where interface was marked down on error
- don't treat parity errors as fatal
- reclaim mgt frames immediately from tx queue
- correct interrupt handling, ack early (from NetBSD)
- fix short/long preamble handling
Committed with RELENG_6 compat #if's, should compile in RELENG_6. Requires
net/iwi-firmware-kmod to function.
Much work done by: sam
Tested by: many (freebsd-net), ume, luigi
MFC after: 4 weeks
entry (PTE) have the same meaning. The exception to this rule is the
eighth bit (0x080). It is the PS bit in a PDE and the PAT bit in a
PTE. This change avoids the possibility that pmap_enter() confuses a
PAT bit with a PS bit, avoiding a panic().
Eliminate a diagnostic printf() from the i386 pmap_enter() that serves
no current purpose, i.e., I've seen no bug reports in the last two
years that are helped by this printf().
Reviewed by: jhb
This driver was generously developed and donated by Highpoint.
It is enabled for i386 only at the moment. I will enable it for amd64
shortly.
Obtained from: HighPoint Technologies, Inc.
- MPSAFE. No more recursive lock required.
- bus_dma(9) conversion. I think it should work on all architectures.
- optimized Rx handler for each normal and jumbo frames. Previously
sk(4) used jumbo frame management code to handle normal sized
frames. As the handler needs an additional lock to protect jumbo
frame management structure from races, it used two lock operations
for each received packet. Now sk(4) uses single lock operation for
normal frame.(Jumbo frame still needs two lock operations as before.)
The hardware supports DMA scatter operations for Rx descriptors such
that it's possible to take advantagee of m_cljget(9) for jumbo frames.
However, due to a unknown reasons it resulted in poor performance on
sparc64. So I dropped m_cljget(9) approach. This should be revisited
since it would reduce one lock operation for jumbo frame handling.
- Tx TCP/Rx IP checksum offload support. According to the data sheet
of SK-NET GENESIS the hardware supports Rx IP/TCP/UDP offload.
But I couldn't make it work on my Yukon hardware. So Rx TCP/UDP was
disabled at the moment. It seems that newer Yukon chips can support
Tx UDP checksum offload too. But I need more documentation first.
- Added more wait time in reading VPD data. It seems that ASUS LOM
takes a very long time to respond VPD read signal.
- Added an additional lock for MII register access callbacks.
- Added more strict received packet validation routine. Previously it
passed corrupted packets to upper layers under certain conditions.
- A new function sk_yukon_tick() to handle auto-negotiation properly.
- Interrupt handler now checks shared interrupt source and protects
the interrupt handler from NULL pointer dereference which was caused
by odd status word value. The status word can returns 0xffffffff if
cable is unplugged while Rx/Tx/auto-negotiation is in progress.
- suspend/resume support(not tested).
- Added Rx/Tx FIFO flush routine for Yukon
- Activate Tx descriptor poll timer in order to protect possible loss
of SK_TXBMU_TX_START command. Previously the driver continuously issued
SK_TXBMU_TX_START when it notices pending Tx descriptors not processed
yet in interrupt handler. That approach would add additional PCI
write access overhead under high Tx load situations and it might fail
if the first SK_TXBMU_TX_START was lost and no interrupt is generated
from the first SK_TXBMU_TX_START command.
- s/printf/if_printf/, s/printf/device_printf/, Axe sk_unit in softc.
- Setting multicast/station address is now safe on strict-alignment
architectures.
- Fix long standing bug in VLAN header length setup.
- Added/corrected register definitions for Yukon.
(Register information from Linux skge driver.)
- Added Rx status definition for Marvell Yukon/XaQti XMAC.
(Rx status register information from Linux skge driver.)
- Update if_oerrors if we encounter watchdog error.
- callout(9) conversion
Special thanks to jkim who let me know RX status differences between
Yukon and XaQti XMAC.
It seems that there is still occasional watchdog timeout error but I
couldn't reproduce it and need more information to analyze it from
users.
Tested by: bz(amd64), me(i386, sparc64), current ML
Frank Behrens frank ! pinky ( sax $ de
(i.e. no keyboard controller present), try two other common methods for
resetting i386 machine - pci reset and port 0x92 fast reset. Only if neither
works warn user and resort to "unmap entire address space and hope for good"
hack. This makes my MacBook Pro rebooting just fine and should also help
other legacy-free hardware out there.
Also, disable interrupts unconditionally in cpu_reset_real(), since we don't
want any interference.
MFC after: 1 week
Lower the minimum for memory mapped I/O from 32 bytes to 16 bytes.
This fixes bus enumeration on ia64 now that the Diva auxiliary
serial port is attached to.
per page = effectively 12.19 bytes per pv entry after overheads).
Instead of using a shared UMA zone for 24 byte pv entries (two 8-byte tailq
nodes, a 4 byte pointer, and a 4 byte address), we allocate a page at a
time per process. This provides 336 pv entries per process (actually, per
pmap address space) and eliminates one of the 8-byte tailq entries since
we now can track per-process pv entries implicitly. The pointer to
the pmap can be eliminated by doing address arithmetic to find the metadata
on the page headers to find a single pointer shared by all 336 entries.
There is an 11-int bitmap for the freelist of those 336 entries.
This is mostly a mechanical conversion from amd64, except:
* i386 has to allocate kvm and map the pages, amd64 has them outside of kvm
* native word size is smaller, so bitmaps etc become 32 bit instead of 64
* no dump_add_page() etc stuff because they are in kvm always.
* various pmap internals tweaks because pmap uses direct map on amd64 but
on i386 it has to use sched_pin and temporary mappings.
Also, sysctl vm.pmap.pv_entry_max and vm.pmap.shpgperproc are now
dynamic sysctls. Like on amd64, i386 can now tune the pv entry limits
without a recompile or reboot.
This is important because of the following scenario. If you have a 1GB
file (262144 pages) mmap()ed into 50 processes, that requires 13 million
pv entries. At 24 bytes per pv entry, that is 314MB of ram and kvm, while
at 12 bytes it is 157MB. A 157MB saving is significant.
Test-run by: scottl (Thanks!)
channel number since we're not ready at the net80211 layer to deal with them;
note this mapping has to match what's done in ieee80211_mhz2ieee
MFC after: 3 days
pointer prototypes from it into their own typedefs. No functional or
ABI change. This allows policies to declare their own function
prototypes based on a common definition from mac_policy.h rather than
duplicating these definitions.
Obtained from: SEDarwin, SPARTA
MFC after: 1 month
controller as we use in boot blocks (querying status register until
bit 1 goes off). If that doesn't happed during reasonable period assume
that the hardware doesn't have AT-style keyboard controller. This makes
FreeBSD working almost OOB on MacBook Pro (still there are issues with
putting second CPU core on-line, but since installation CD comes with
UP kernel with this change one should be able to install FreeBSD without
playing tricks with hints). Other legacy-free hardware (e.g. IBM NetVista
S40) should benefit from this as well, but since I don't have any I can't
verify.
It should make no difference on the ordinary i386 hardware (since in
that case that hardware already would be having an issues with A20
routines in boot blocks). I don't know much about AT-style keyboard
controller on other platforms (and don't have dedicated access to one),
therefore, the code is restricted to i386 for now. I suspect that amd64
may need this as well, but I would rather leave this decision to someone
who knows better about the platform(s) in question.
I have tested this change on as many "ordinary i386 boxes" as I can get
my hands on, and it doesn't create any false negatives on hardware with
AT-style keyboard present.
MFC after: 1 month
now back to using fixed-size columns for output and each line of output
should fit in 80 columns on both 32-bit and 64-bit architectures. In
general the output is close to that of the userland ps(1) with the
exception that the 'wmesg' field is mostly similar to the "state" field
in top(1) in that it will show either a wmesg, a lock name (prefixed with
an *), "CPU xx" (for a running thread), or nothing if none of those three
conditions are true. It also respects td_name when listing threads in
a multithreaded process. There is a somewhat evilly-defined PTR64 macro
I use to make account for the change in the size of the 'wchan' column
in the formatted output (wchan is now the only pointer in the ps output
and is available so it can be passed to 'show sleepq', 'show turnstile',
or 'show lock').
- Add two new commands "show proc [process]" and "show thread [thread]"
that show details about the specified process or thread (specified
either by pid/tid or pointer), respectively. If an address it not
specified, it uses the current kdb thread.
problems in ddb:
- "show threadchain [thread]" will start with the specified thread (or the
current kdb thread by default) and show it's state. If it is blocked on
a lock, it will find the owner of the lock and show its state, etc.
- "show allchains" will find all of the threads that are blocked on a
lock (but do not have any threads blocked on a lock they hold) and show
the resulting thread chain.
- "show lockchain <lock>" takes a pointer to a lock_object (such as a
mutex or rwlock). If there is a turnstile for that lock, then it will
display all the threads blocked on the lock. In addition, for each
thread blocked on the lock, it will display any contested locks they
hold, and recurse on those locks to show any threads blocked on those
locks, etc.
take the addr value passed to a ddb command and attempt to use it to
lookup a struct thread * or struct proc *, respectively. Each function
first reparses the passed in value as if it was an ID entered in base 10.
For threads the ID is treated as a thread ID, for proceses the ID is
treated as a PID. If a thread or proc matching the ID is found, it is
returned. For db_lookup_thread(), if the check_pid argument is true and
it didn't find a thread with a matching thread ID, it will treat the ID as
a PID and look for a matching process. If it finds one it returns the
first thread in the process. If none of the ID lookups succeeded, then
the functions assume that the passed in address is a thread or proc
pointer, respectively. This allows one to use tids, pids, or structure
pointers interchangeably in ddb functions that want to lookup threads or
processes if desired.
sampling_interval) fields in netflow v5 header. We do not use
them but some netflow tools show garbage.
PR: kern/96296
Submitted by: David Duchscher
Approved by: glebius
MFC after: 1 week
the fact that the loop through inpcb's in udp_input() tracks the
last inpcb while looping. We keep that name in the calling loop
but not in the delivery routine itself.
MFC after: 3 months
This allows one to change the behavior of the driver pre-boot.
NOTE: This patch was made for DragonFly BSD by Sepherosa Ziehau.
PR: kern/94833
Submitted by: Devon H. O'Dell
Obtained from: DragonFly
MFC after: 1 month
even if we're going to return an argument-based error.
Assert pcbinfo lock in in6_pcblookup_local(), in6_pcblookup_hash(), since
they walk pcbinfo inpcb lists.
Assert inpcb and pcbinfo locks in in6_pcbsetport(), since
port reservations are changing.
MFC after: 3 months
file lock, in the style of fgetsock().
Modify accept1() to use getsock() instead of fgetsock(), relying on the
file descriptor reference rather than an acquired socket reference to
prevent the listen socket from being destroyed during accept(). This
avoids additional reference count operations, which should improve
performance, and also avoids accept1() operating on a socket whose file
descriptor has been torn down, which may have resulted in protocol
shutdown starting.
MFC after: 3 months
into in_pcbdrop(). Expand logic to detach the inpcb from its bound
address/port so that dropping a TCP connection releases the inpcb resource
reservation, which since the introduction of socket/pcb reference count
updates, has been persisting until the socket closed rather than being
released implicitly due to prior freeing of the inpcb on TCP drop.
MFC after: 3 months
end for isa(4).
o Add a seperate bus frontend for acpi(4) and allow ISA DMA for
it when ISA is configured in the kernel. This allows acpi(4)
attachments in non-ISA configurations, as is possible for ia64.
o Add a seperate bus frontend for pci(4) and detect known single
port parallel cards.
o Merge PC98 specific changes under pc98/cbus into the MI driver.
The changes are minor enough for conditional compilation and
in this form invites better abstraction.
o Have ppc(4) usabled on all platforms, now that ISA specifics
are untangled enough.
caches are dangerous" to "a shared L1 data cache is dangerous". This
is a compromise between paranoia and performance: Unlike the L1 cache,
nobody has publicly demonstrated a cryptographic side channel which
exploits the L2 cache -- this is harder due to the larger size, lower
bandwidth, and greater associativity -- and prohibiting shared L2
caches turns Intel Core Duo processors into Intel Core Solo processors.
As before, the 'machdep.hyperthreading_allowed' sysctl will allow even
the L1 data cache to be shared.
Discussed with: jhb, scottl
Security: See FreeBSD-SA-05:09.htt for background material.
common pcb tear-down logic into tcp_detach(), which is called from
either. Invoke tcp_drop() from the tcp_usr_abort() path rather than
tcp_disconnect(), as we want to drop it immediately not perform a
FIN sequence. This is one reason why some people were experiencing
panics in sodealloc(), as the netisr and aborting thread were
simultaneously trying to tear down the socket. This bug could often
be reproduced using repeated runs of the listenclose regression test.
MFC after: 3 months
PR: 96090
Reported by: Peter Kostouros <kpeter at melbpc dot org dot au>, kris
Tested by: Peter Kostouros <kpeter at melbpc dot org dot au>, kris
subject: ranges of uid, ranges of gid, jail id
objects: ranges of uid, ranges of gid, filesystem,
object is suid, object is sgid, object matches subject uid/gid
object type
We can also negate individual conditions. The ruleset language is
a superset of the previous language, so old rules should continue
to work.
These changes require a change to the API between libugidfw and the
mac_bsdextended module. Add a version number, so we can tell if
we're running mismatched versions.
Update man pages to reflect changes, add extra test cases to
test_ugidfw.c and add a shell script that checks that the the
module seems to do what we expect.
Suggestions from: rwatson, trhodes
Reviewed by: trhodes
MFC after: 2 months
the same number or fewer lines of code.
Don't cast using caddr_t.
Remember to unlock the natm lock in some error cases where it was leaked
previously.
Annotate two cases where we'd like to hold the natm subsystem lock over
ioctls into the device driver.
Hold the natm lock longer in natm_usr_connect() so we can copy the npcb
fields while holding the mutex.
MFC after: 3 months
mutex is no longer required to ensure that so_pcb is valid.
Make sure to free (control) in natm_usr_send() when there M_PREPEND()
frees (m).
MFC after: 3 months
function along with the remainder of the reference checking code. Move
comment from body to header with remainder of comments. Inclusion of a
socket in a completed connection queue counts as a true reference, and
should not be handled as an under-documented edge case.
MFC after: 3 months
- Depend on opt_ddb.h, since npcb_dump() is ifdef'd DDB.
- Include ddb/ddb.h so we can call db_printf() and use DB_SHOW_COMMAND().
- Don't test results of malloc() under DIAGNOSTIC, let the memory allocator
take care of its own invariants.
MFC after: 1 month
list head structure; this improves congruence to IPv4, and also allows
in6_pcbpurgeif0() to lock the pcbinfo. Modify in6_pcbpurgeif0() to lock
the pcbinfo before iterating the pcb list, use queue(9)'s LIST_FOREACH()
for the iteration, and to lock individual inpcb's while manipulating
them.
MFC after: 3 months
date: 2006/04/12 04:22:50; author: alc; state: Exp; lines: +14 -41
Retire pmap_track_modified(). We no longer need it because we do not
create managed mappings within the clean submap. To prevent regressions,
add assertions blocking the creation of managed mappings within the clean
submap.
Reviewed by: tegge
number state, rather than re-using pcbinfo. This introduces some
additional mutex operations during isn query, but avoids hitting the TCP
pcbinfo lock out of yet another frequently firing TCP timer.
MFC after: 3 months
holding the inpcb lock is sufficient to prevent races in reading
the address and port, as both the inpcb lock and pcbinfo lock are
required to change the address/port.
Improve consistency of spelling in assertions about inp != NULL.
MFC after: 3 months
A slight difference of this chip from its previous siblings is that
it need a gentle "wake up" on every (full) DMA buffer completion to
avoid stalled interrupt handler.
Thanks to George Hartzell for permission on doing remote debugging.
Prime MFC candidate for 6.1-RELEASE. Please reply to this commit if
there are any objections (so I won't bug re@), since the changes
are too small and only specific to VT8251.
PR: i386/95949
Tested by: [1] George Hartzel
myself (remotely)
MFC after: 3 days
[1] http://lists.freebsd.org/pipermail/freebsd-multimedia/2006-April/004003.html
Pull in some target mode changes from a private branch.
Pull in some more RELENG_4 compilation changes.
A lot of lines changed, but not much content change yet.
Make this compile, assuming that you have linux installed in a
sensible place. tag_list is disabled by default, since we don't
distribute linux, but it is desirable to allow the boot loader to boot
Linux or FreeBSD (mostly for testing).
enables multilabel, or any option for that matter, most likely they have
a reason. This will allow users to see that mulilabel is enabled via an
issued "mount" command and remove an annoying warning - printed only when
a MAC kernel is not installed - on boot up.
Discussed with: green, brueffer, Samy Al Bahra.
Probably ran past: csjp (though I can't remember).
xmodem download. Then download the image you want in the flash.
This will burn the image into the flash. You must then reset the
unit and the new flash image will be used for booting...
xmodem download. Then download the image you want in the eeprom.
This will burn the image into the eeprom. You must then reset the
unit and the new eeprom image will be used for booting...
Major differences:
* since there is no direct map region, there is no custom uma memory
allocator to modify to include its pages in the dumps.
* Various data entries are reduced from 64 bit to 32 bit to match the
native size.
dump_add_page() and dump_drop_page() are still present in case one wants to
arrange for arbitary pages to be dumped. This is of marginal use though
because libkvm+kgdb cannot address physical memory that isn't mapped into
kvm.
via the debug.minidump sysctl and tunable.
Traditional dumps store all physical memory. This was once a good thing
when machines had a maximum of 64M of ram and 1GB of kvm. These days,
machines often have many gigabytes of ram and a smaller amount of kvm.
libkvm+kgdb don't have a way to access physical ram that is not mapped
into kvm at the time of the crash dump, so the extra ram being dumped
is mostly wasted.
Minidumps invert the process. Instead of dumping physical memory in
in order to guarantee that all of kvm's backing is dumped, minidumps
instead dump only memory that is actively mapped into kvm.
amd64 has a direct map region that things like UMA use. Obviously we
cannot dump all of the direct map region because that is effectively
an old style all-physical-memory dump. Instead, introduce a bitmap
and two helper routines (dump_add_page(pa) and dump_drop_page(pa)) that
allow certain critical direct map pages to be included in the dump.
uma_machdep.c's allocator is the intended consumer.
Dumps are a custom format. At the very beginning of the file is a header,
then a copy of the message buffer, then the bitmap of pages present in
the dump, then the final level of the kvm page table trees (2MB mappings
are expanded into a 4K page mappings), then the sparse physical pages
according to the bitmap. libkvm can now conveniently access the kvm
page table entries.
Booting my test 8GB machine, forcing it into ddb and forcing a dump
leads to a 48MB minidump. While this is a best case, I expect minidumps
to be in the 100MB-500MB range. Obviously, never larger than physical
memory of course.
minidumps are on by default. It would want be necessary to turn them off
if it was necessary to debug corrupt kernel page table management as that
would mess up minidumps as well.
Both minidumps and regular dumps are supported on the same machine.
o Use a directory layout that is more akin to the i386 boot layout.
o Create a libat91 for library routines that are used by one or more
of the boot loaders.
o Create bootiic for booting from an iic part.
o Create bootspi for booting from an spi part.
o Optimize the size of many of these routines (especially emac.c). Except
for the emac.c optimizations, all these have been tested.
o eliminate the inc directory, libat91 superceeds it.
o Move linker.cfg up a layer to allow it to be shared.
state structure. This field is only for CCBs that are associated with
actions that are occurring on the HBA (i.e., XPT_CONT_IO actions).
This way we also don't get confused when the upstream listener stalls
try and look at a CCB which has already been freed (by CAM).
to reduce the pv_entry_count counter. This was found by Tor Egge. In the
same email, Tor also pointed out the pv_stats problem in the previous
commit, but I'd forgotten about it until I went looking for this email
about this allocation problem.
locked. In general the adaptive spinning is similar to the same code
for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically,
even though both wait bits might be set and we might have a turnstile with
at least one waiting thread, there might not be any threads blocked on the
queue we are not waking up (they might all be spinning), and we should
only preserve the waiting flag for the queue we aren't waking up if there
are in fact threads blocked on that queue. Secondly, there might not be
any threads blocked on the queue we have chosen to waken threads from
(there might only be threads blocked on the other queue and the threads
for this queue are all spinning) in which case we disown the turnstile
instead of doing a braodcast and unpend.
stored in metadata instead of an offset in single disk.
After reboot/crash synchronization process started from a wrong offset
skipping (not synchronizing) part of the component which can lead to data
corrutpion (when synchronization process was interrupted on initial
synchronization) or other strange situations like 'graid3 status' showing
value more than 100%.
Reported, reviewed and tested by: ru
Reported by: Dmitry Morozovsky <marck@rinet.ru>
MFC after: 1 day
as pcf_ebus and pcf_isa, they should probably be fixed back to pcf),
and bti2c doesn't exist, bktr has smbus or iicbb as children..
Brought to you by: http://people.FreeBSD.org/~jmg/driver.pdf
use it in places that only care about the write owner instead of
rw_owner() as a baby step towards limited read-lock owner.
- Tidy the code that sets the WAITER flag bits to not duplicate a test
around the atomic operation and the KTR trace in both of the lock
functions.
above what's used for fast interrupts, only interrupts with the level of
the interrupt which led to calling intr_fast() (which is used with both
fast and ithread interrupts) are blocked while in that function. Thus
intr_fast() can be preempted by a fast interrupt (which are of a higher
level than ithread interrupts) while servicing an ithread interrupt. This
can lead to a stale pointer to the head of the active interrupt requests
list when back in the ithread interrupt invocation of intr_fast(), in turn
resulting in corruption of the interrupt request lists and consequently
in a panic. Solve this be turning off interrupts in intr_fast() before
reading the pointer to the head of the active list rather than after. [1]
- Add a KASSERT in intr_fast() which asserts that ir_func is non-zero before
calling it. [1]
- Increment interrupt stats after calling the handlers rather than before.
This reduces the delay until direct and fast handlers are serviced, in my
testings by 30% on average for the direct tick interrupt handler, in turn
resulting in less clock drift.
PR: 94778 [1]
Submitted by: Andrew Belashov [1]
MFC after: 2 weeks
with a given module_t. I use this in some the MOD_LOAD event handler for
some test kernel modules to ask the kernel linker to look up the linker
sets in my test modules. (I use linker sets to generate the list of
possible events that I then signal to execute via a sysctl. On non-amd64,
ld(8) would resolve the entire linker set, but on amd64 I have to ask the
kernel linker to do it for me, and having the kernel linker do it works on
all archs.)
if the specified priority is zero. This avoids a race where the calling
thread could read a snapshot of it's current priority, then a different
thread could change the first thread's priority, then the original thread
would call sched_prio() inside msleep() undoing the change made by the
second thread. I used a priority of zero as no thread that calls msleep()
or tsleep() should be specifying a priority of zero anyway.
The various places that passed 'curthread->td_priority' or some variant
as the priority now pass 0.
have not been passed to the h/w yet. This remedies watchdog timeout
of buffered multicast frames in hostap mode.
While here eliminate an extraneous check; ieee80211_beacon_update sets
the tim bit based on ncabq != 0 so there's no reason to check it too.
Noticed by: Christophe Prevotaux
compiler doesn't decide to cache td_state. Cachine the state would cause
the spinning thread to not notice when the owning thread stopped executing
(if it was preempted for example) which could result in livelock.
