to <machine/conf.h>. conf.h was mechanically generated by
`grep ^d_ conf.c >conf.h'. This accounts for part of its ugliness. The
prototypes should be moved back to the driver sources when the functions
are staticalized.
the kernel. ppp_tty.c goes to some lengths to minimise the inter-layer
calling (including a soft ISR). ppp_tty.c takes care of the soft masking
that was needed still.
(I've discovered that bugs in this area show up within an hour if the
masking was not correct.. :-} This combination has proven stable on
specialix serial ports, although there was some concern about the softtty
parts of sio/cy and netisr colliding - but Bruce has fixed that now)
Submitted by: fgray@rice.edu
this driver hasn't been checked but as a separate module, bringing it in won't
break anything else and it't the best way of testing it......
julian
line discipline interrupt handlers more or less expect to be called at
spltty() == splimp(), although they have internal splimp()s that are
bogus if this expectation is satisfied. They are called at splsoftty()
from many tty drivers, so they were not protected from being reentered
from their own netisrs. They certainly don't expect that but are
apparently remarkably robust if it occurs. The problem in PR 798 seems
to be caused by pppstart() being reentered and finishing off the output
in progress by following the (stale) sc->sc_outm pointer. Then the
original pppstart() finds garbage in m2 after MFREE(m, m2). slstart()
doesn't have internal state like sc_outm so reentry of it probably only
causes out of order and dropped packets.
modularization of the wd/wcd/atapi driver is ugly.
Include cons.h from a less bogus place.
Removed an ARGSUSED. Unused args are normal for devswitch functions
and lint was informed about them for about 5 functions out of 1000.
Lint should be informed about them, if at all, in some other way.
Remove confusing backwards compatibility code that allowed driver to be
used in pre-4.4 releases. The 3COM card's use -link2 to switch tranceivers.
(no functional changes here)
This code will only be included in your kernel if you have
'options DEVRANDOM', but that will fall away in a couple of days.
Obtained from: Theodore Ts'o, Linux
the new seeprom format and negotiate up to 20MHz sync if set in SCSI-Select.
Reduce the complexity of the timeout code by running it at splhigh(). Fix
a bug that caused rescheduled timeouts at 0 clock ticks in the future causing
an infinite loop.
Obtained from: Timeout bug noticed by David Greenman and wcarchive.
Submitted by: Mike Mitchell, supervisor@alb.asctmd.com
This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..
Mikes been using it for a year or so
but on 2.0
more changes and stuff will be merged in from other developers now that this is in.
Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
Fix the tests for being a console by reverting to the ones that
were used before the the RB_SERIAL changes. RB_SERIAL only needs
to be tested in one place. The initialization of comconsole was
wrong before the RB_SERIAL changes for the COMCONSOLE case. This
may have been the cause of the unnecessary changes.
Start eliminating #includes of <i386/i386/cons.h>. This header is
supposed to be included from <machine> although it should be
completely machine-independent and included from <sys>.
Remove a wrong XXX comment. `comconsole' is used to test for being
a console and even the tests for deciding the default termios state
are necessary (the semi-reentrant i/o routines don't handle ordinary
device i/o).
cy.c:
Sync with sio.c. The console tests are present but always fail.
handler (remove SA_NODEFER).
On the other hand, signal() case should set sa_flags to SA_NODEFER as
in previous change.
In addition, added #ifdef'd code for signal() to or in SA_RESETHAND
flag for when that compatability is implemented.
accesses after the BIOS bus scan. The previous revision made the assumption,
that every PCI motherboard did ...
Change the test on the initial value of the CONF1_ADDR_PORT register in a way
that makes the probe succeed on triton based motherboards, without breaking
the EISA motherboard that has some non-PCI register at the same address.
This is truly a hack. The idea is taken from the Linux ibcs2 emulator.
To use this feature, you must use the option,
options SPX_HACK
in your config.
Also, in /compat/ibcs2/dev, you must do:
lrwxr-xr-x 1 root wheel 9 Oct 15 22:20 X0R@ -> /dev/null
lrwxr-xr-x 1 root wheel 7 Oct 15 22:20 nfsd@ -> socksys
lrwxr-xr-x 1 root wheel 9 Oct 15 22:20 socksys@ -> /dev/null
crw-rw-rw- 1 root wheel 41, 1 Oct 15 22:14 spx
Do NOT use old socksys driver as that has been removed.
This hack needs /compat/ibcs2/dev/spx to be any device that does NOT
exist/configured (so the now non-existant spx major/minor works fine).
When an open() is called, the error ENXIO is checked and then the
path is checked. If spx open detected, then a unix socket is opened
to the hardcoded path "/tmp/.X11-unix/X0".
As the Linux hacker author mentioned, the real way would be to detect
the getmsg/putmsg through /dev/X0R and /dev/spx. Until this true
solution is implemented (if ever), I think this hack is important
enough to be put into the tree, even though I don't like it dirtying
up my clean code (which is what #ifdef SPX_HACK is for).
Currently, the emulator defaults to returning "FreeBSD" as the system
name, release "3.2", and version "2.0". Some programs want to make
sure they are on a SYSV 3.2 system and check for 3.X release number.
Use the following defines to override the defaults:
IBCS2_UNAME_SYSNAME
IBCS2_UNAME_RELEASE
IBCS2_UNAME_VERSION
(should be string)
for system name, release, and version, respectively. This allows
someone to compile the emulator into the kernel so it can pretend
to be a specific system if needed.
Require the state of the configuration enable bits to be OFF assuming
that the BIOS left them that way, as it should anyway to avoid bad things
to happen.
The tests themselves are copied from the previous release, with the
exception of CONF1_ENABLE_MSK1 having the LSB set. This bit should be
read back as '0', since only DWORD addresses are legal.