Bool module parameters are no longer supported, because there is no
equivalent in FreeBSD.
There are two macros available which control the behaviour of the
LinuxKPI module parameters:
- LINUXKPI_PARAM_PARENT allows the consumer to set the SYSCTL parent
where the modules parameters will be created.
- LINUXKPI_PARAM_PREFIX defines a parameter name prefix, which is
added to all created module parameters.
Sponsored by: Mellanox Technologies
MFC after: 1 week
tunable SYSCTL's. Linux module parameters are associated with the
module they belong to. FreeBSD does not share this concept of a parent
module. Instead add macros which define the prefix to use for the
module parameters in the LinuxKPI consumers.
While at it convert all "bool" LinuxKPI module parameters to "byte"
type, because we don't have a "bool" type of SYSCTL in FreeBSD.
Sponsored by: Mellanox Technologies
MFC after: 1 week
run after a panic(). This for example allows a LinuxKPI based graphics
stack to receive prints during a panic.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
Etherswitch support is built by default on all SoCs except RT3662/RT3883
as they have no built-in switch and their configurations with external
switches are not yet supported.
Sponsored by: Smartcom - Bulgaria AD
Currently all radiotap structures in ral(4) are packed, but are not
aligned, which causes ral based devices to crash when one does
'ifconfig wlan0 up' for a wlan interface with a ral wlandev on arches
that care about structure alignment (e.g., MIPS).
Adding an aligned attribute helps fix this problem and ral devices
can be properly brought up.
Reviewed by: adrian
Sponsored by: Smartcom - Bulgaria AD
And release IDT vector before releasing ISR resources on interrupt
teardown path. We still have some work to do on the interrupt tearing
down path.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6519
Though it is highly unlikely this function would fail w/ BUS_DMA_WAITOK,
we had better to check its return value; better safe then sorry here.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6518
o Some Samsung drives do not support the ATA READ LOG EXT or READ
LOG DMA EXT commands, despite indicating that they do in their
IDENTIFY data. So, fix this in two ways:
1. Only start the log directory probe (ADA_STATE_LOGDIR) if
the drive claims to be an SMR drive in the first place.
We don't need to do the extra probing for other devices.
This will also serve to prevent problems with other
drives that have the same issue.
2. Add quirks for the two Samsung drives that have been
reported so far (thanks to Oleg Nauman and Alex Petrov).
If there is a reason to do a Read Log later on, we will
know that it doesn't work on these drives.
o Add a quirk entry to mark Seagate Lamarr Drive Managed drives as
drive managed. They don't report this in their Identify data.
sys/cam/ata/ata_da.c:
Add two new quirks:
1. ADA_Q_LOG_BROKEN, for drives that claim to support Read
Log but don't really.
2. ADA_Q_SMR_DM, for drives that are Drive Managed SMR, but
don't report it. This can matter for software that
wants to know when it should make an extra effort to
write sequentially.
Record two Samsung drives that don't support Read Log, and
one Seagate drive that doesn't report that it is a SMR drive.
The Seagate drive is already recorded in the da(4) driver.
We may have to come up with a similar solution in the da(4)
driver for SATA drives that don't properly support Read Log.
In adasetflags(), Dont' set the ADA_FLAG_CAN_LOG bit if the
device has the LOG_BROKEN quirk set. Also, look at the
SMR_DM quirk and set the device type accordingly if it is
actually a drive managed drive.
When deciding whether to go into the LOGDIR probe state,
look to see whether the device claims to be an SMR device.
If not, don't bother with the LOGDIR probe state.
Sponsored by: Spectra Logic
This was found while reworking the device tree nodes for dtsec to match the
Linux device tree. Instead of waiting and expecting later code to call
dpaa_portal_map_registers(), do the equivalent immediately upon mapping.
Otherwise, it's possible to access the pages before that function is called, and
hang the CPU.
This unifies handling of core, chip, and board-level device
matching, and adds support for matching device drivers
against the bus attach type (e.g. SoC vs WiFi adapter).
Core-level quirks on Broadcom's chipsets generally are specific
to some combination of chip model, core revision, chip
package (e.g. 12x9 SMT package), SROM revision, etc.
Unifying the match APIs for all three attribute types (core, chip,
board/srom) allows defining a single device quirk table that
matches across all of those attributes.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6515
After the previous changes to fix requests on blocking sockets to complete
across multiple operations, an edge case exists where a request can be
cancelled after it has partially completed. POSIX doesn't appear to
dictate exactly how to handle this case, but in general I feel that
aio_cancel() should arrange to cancel any request it can, but that any
partially completed requests should return a partial completion rather
than ECANCELED. To that end, fix the socket AIO cancellation routine to
return a short read/write if a partially completed request is cancelled
rather than ECANCELED.
Sponsored by: Chelsio Communications
The mem_alloc macro calls calloc (userspace) / malloc(.., M_WAITOK|M_ZERO)
under the covers, so zeroing out memory is already handled by the underlying
calls
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
for empty page cache when the object type if OBJT_VNODE.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
(the value we had before supervisor exception occurred).
This helps consumers (e.g. DTrace) to not proceed additional calculations.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
than sc->areq. This is a bounds check to ensure we're not just cramming
arbitrarily sized nonsense into the driver and overflowing the heap.
PR: 209545
Submitted by: cturt@hardenedbsd.org
MFC after: 2 weeks
Option EFSYS_OPT_ALLOW_UNCONFIGURED_NIC disables check that the adapter
MAC address is not a local address (beginning 02).
Submitted by: Laurence Evans <levans at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6508
We may enable interrupts from within the callback, e.g. in a data abort
during copyin. If we receive an interrupt at that time pmc_hook will be
called again and, as it is handling userspace stack tracing, will hit a
KASSERT as it checks if the trapframe is from userland.
With this I can run hwpmc with intrng on a ThunderX and have it trace all
CPUs.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
changing the type on the mtu field in struct tuninfo from short to
unsigned short.
This is used, for example, by packetdrill to test with MTUs up to the
maximum value.
Differential Revision: 6452
freed page as VPO_UNMANAGED. Otherwise vm_pge_free_toq() insists on
owning the page lock.
Previously, VPO_UNMANAGED was only set up to the last processed page.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Existing issue of not protecting pager_object_list iteration in
vm_pager_object_lookup() by sw_alloc_mtx is not affected by Giant
removal.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
