These diffs implement the first stage of a VOP_{GET|PUT}PAGES pushdown
for local media FS's.
See ffs_putpages in /sys/ufs/ufs/ufs_readwrite.c for implementation
details for generic *_{get|put}pages for local media FS's. Support
is trivial to add for any FS that formerly relied on the default
behaviour of the vnode_pager in in EOPNOTSUPP cases (just copy the
ffs_getpages() code for the FS in question's *_{get|put}pages).
Obviously, it would be better if each local media FS implemented a
more optimal method, instead of calling an exported interface from
the /sys/vm/vnode_pager.c, but this is a necessary first step in
getting the FS's to a point where they can be supplied with better
implementations on a case-by-case basis.
Obviously, the cd9660_putpages() can be rather trivial (since it
is a read-only FS type 8-)).
A slight (temporary) modification is made to print a diagnostic message
in the case where the underlying filesystem attempts to engage in the
previous behaviour. Failure is likely to be ungraceful.
Submitted by: terry@freebsd.org (Terry Lambert)
improve tuning on larger systems. (A couple of the VM tuning params for
small systems were so badly chosen that the system could hang under load.)
The broken tuning was originaly my fault.
have declined due to code-rot over time. The swap pager rundown code
has been clean-up, and unneeded wakeups removed. Lots of splbio's
are changed to splvm's. Also, set the dynamic tunables for the
pageout daemon to be more sane for larger systems (thereby decreasing
the daemon overheadla.)
in a way identically as before.) I had problems with the system properly
handling the number of vnodes when there is alot of system memory, and the
default VM_KMEM_SIZE. Two new options "VM_KMEM_SIZE_SCALE" and
"VM_KMEM_SIZE_MAX" have been added to support better auto-sizing for systems
with greater than 128MB.
Add some accouting for vm_zone memory allocations, and provide properly
for vm_zone allocations out of the kmem_map. Also move the vm_zone
allocation stats to the VM OID tree from the KERN OID tree.
of the various ad-hoc schemes.
2) When bringing in UPAGES, the pmap code needs to do another vm_page_lookup.
3) When appropriate, set the PG_A or PG_M bits a-priori to both avoid some
processor errata, and to minimize redundant processor updating of page
tables.
4) Modify pmap_protect so that it can only remove permissions (as it
originally supported.) The additional capability is not needed.
5) Streamline read-only to read-write page mappings.
6) For pmap_copy_page, don't enable write mapping for source page.
7) Correct and clean-up pmap_incore.
8) Cluster initial kern_exec pagin.
9) Removal of some minor lint from kern_malloc.
10) Correct some ioopt code.
11) Remove some dead code from the MI swapout routine.
12) Correct vm_object_deallocate (to remove backing_object ref.)
13) Fix dead object handling, that had problems under heavy memory load.
14) Add minor vm_page_lookup improvements.
15) Some pages are not in objects, and make sure that the vm_page.c can
properly support such pages.
16) Add some more page deficit handling.
17) Some minor code readability improvements.
MUST be PG_BUSY. It is bogus to free a page that isn't busy,
because it is in a state of being "unavailable" when being
freed. The additional advantage is that the page_remove code
has a better cross-check that the page should be busy and
unavailable for other use. There were some minor problems
with the collapse code, and this plugs those subtile "holes."
Also, the vfs_bio code wasn't checking correctly for PG_BUSY
pages. I am going to develop a more consistant scheme for
grabbing pages, busy or otherwise. For now, we are stuck
with the current morass.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)
LFS is temporarily disabled, and will be re-enabled tomorrow.
1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.
This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)
This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)
config option in pmap. Fix a problem with faulting in pages. Clean-up
some loose ends in swap pager memory management.
The system should be much more stable, but all subtile bugs aren't fixed yet.
Fix the UIO optimization code.
Fix an assumption in vm_map_insert regarding allocation of swap pagers.
Fix an spl problem in the collapse handling in vm_object_deallocate.
When pages are freed from vnode objects, and the criteria for putting
the associated vnode onto the free list is reached, either put the
vnode onto the list, or put it onto an interrupt safe version of the
list, for further transfer onto the actual free list.
Some minor syntax changes changing pre-decs, pre-incs to post versions.
Remove a bogus timeout (that I added for debugging) from vn_lock.
PHK will likely still have problems with the vnode list management, and
so do I, but it is better than it was.
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
of vnodes and objects. There are some metadata performance improvements
that come along with this. There are also a few prototypes added when
the need is noticed. Changes include:
1) Cleaning up vref, vget.
2) Removal of the object cache.
3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore.
4) Correct some missing LK_RETRY's in vn_lock.
5) Correct the page range in the code for msync.
Be gentle, and please give me feedback asap.
noticed some major enhancements available for UP situations. The number
of UP TLB flushes is decreased much more than significantly with these
changes. Since a TLB flush appears to cost minimally approx 80 cycles,
this is a "nice" enhancement, equiv to eliminating between 40 and 160
instructions per TLB flush.
Changes include making sure that kernel threads all use the same PTD,
and eliminate unneeded PTD switches at context switch time.
is apparently useful for large shell systems, or systems with long running
idle processes. To enable the feature:
sysctl -w vm.swap_idle_enabled=1
Please note that some of the other vm sysctl variables have been renamed
to be more accurate.
Submitted by: Much of it from Matt Dillon <dillon@best.net>
the maximum pageout rate:
sysctl -w vm.vm_maxlaunder=n
1 < n < inf.
If paging heavily on large systems, it is likely that a performance
improvement can be achieved by increasing the parameter. On a large
system, the parm is 32, but numbers as large as 128 can make a big
difference. If paging is expensive, you might try decreasing the
number to 1-8.
sysctl -w vm.defer_swap_pageouts=1
Causes the system to resist the use of swap space. In low memory
conditions, performance will decrease.
sysctl -w vm.disable_swap_pageouts=1
Causes the system to mostly disable the use of swap space. In
low memory conditions, the system will likely start killing
processes.
it in struct proc instead.
This fixes a boatload of compiler warning, and removes a lot of cruft
from the sources.
I have not removed the /*ARGSUSED*/, they will require some looking at.
libkvm, ps and other userland struct proc frobbing programs will need
recompiled.
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
plus the previous changes to use the zone allocator decrease the useage
of malloc by half. The Zone allocator will be upgradeable to be able
to use per CPU-pools, and has more intelligent usage of SPLs. Additionally,
it has reasonable stats gathering capabilities, while making most calls
inline.
entry when handling a fault. This is set by procfs whenever it wants
to write to a page, as a means of overriding `r-x COW' entries, but
causes failures in the `rwx' case.
Submitted by: bde
Introduce VFREE which indicates that vnode is on freelist.
Rename vholdrele() to vdrop().
Create vfree() and vbusy() to add/delete vnode from freelist.
Add vfree()/vbusy() to keep (v_holdcnt != 0 || v_usecount != 0)
vnodes off the freelist.
Generalize vhold()/v_holdcnt to mean "do not recycle".
Fix reassignbuf()s lack of use of vhold().
Use vhold() instead of checking v_cache_src list.
Remove vtouch(), the vnodes are always vget'ed soon enough
after for it to have any measuable effect.
Add sysctl debug.freevnodes to keep track of things.
Move cache_purge() up in getnewvnodes to avoid race.
Decrement v_usecount after VOP_INACTIVE(), put a vhold() on
it during VOP_INACTIVE()
Unmacroize vhold()/vdrop()
Print out VDOOMED and VFREE flags (XXX: should use %b)
Reviewed by: dyson
allowed to choose the address, or that the MAP_FIXED address has the same
remainder when modulo PAGE_SIZE as the file offset. Apparently this is
posix1003.1b specified behavior. SVR4 and the other *BSD's allow it too.
It costs us nothing to support and means we don't get EINVAL on some mmap
code that works perfectly elsewhere.
Obtained from: NetBSD
vm_inherit_t. These types are smaller than ints, so the prototypes
should have used the promoted type (int) to match the old-style function
definitions. They use just vm_prot_t and/or vm_inherit_t. This depends
on gcc features to work. I fixed the definitions since this is easiest.
The correct fix may be to change the small types to u_int, to optimize
for time instead of space.
free list problem. Also, the vnode age flag is no longer used by the
vnode pager. (It is actually incorrect to use then.) Constructive
feedback welcome -- just be kind.
VM systems usage of the kernel lock (lockmgr) code. This is a first
pass implementation, and is expected to evolve as needed. The API
for the lock manager code has not changed, but the underlying implementation
has changed significantly. This change should not materially affect
our current SMP or UP code without non-standard parameters being used.
the system is out of memory. The daemon does a minimal amount of work that
increases as the system becomes more likely to run out of memory and page in/out.
The default tuning is fairly low in background CPU usage, and sysctl variables
have been added to enable flexable operation. This is an experimental feature
that will likely be changed and improved over time.
of the kernel, and also most of the dynamic parts of the kernel. Additionally,
4MB pages will be allocated for display buffers as appropriate (only.)
The 4MB support for SMP isn't complete, but doesn't interfere with operation
either.
flag wasn't being respected during vref(), et. al. Note that this
isn't the eventual fix for the locking problem. Fine grained SMP
in the VM and VFS code will require (lots) more work.
and b_validend. The changes to vfs_bio.c are a bit ugly but hopefully
can be tidied up later by a slight redesign.
PR: kern/2573, kern/2754, kern/3046 (possibly)
Reviewed by: dyson
the pageout daemon wasn't always being waken up appropriately when the
(cache + free) queues were depleted.
Submitted by: David S. Miller <davem@jenolan.rutgers.edu>
There are various options documented in i386/conf/LINT, there is more to
come over the next few days.
The kernel should run pretty much "as before" without the options to
activate SMP mode.
There are a handful of known "loose ends" that need to be fixed, but
have been put off since the SMP kernel is in a moderately good condition
at the moment.
This commit is the result of the tinkering and testing over the last 14
months by many people. A special thanks to Steve Passe for implementing
the APIC code!
fork. (On my machine, fork is about 240usecs, vfork is 78usecs.)
Implement rfork(!RFPROC !RFMEM), which allows a thread to divorce its memory
from the other threads of a group.
Implement rfork(!RFPROC RFCFDG), which closes all file descriptors, eliminating
possible existing shares with other threads/processes.
Implement rfork(!RFPROC RFFDG), which divorces the file descriptors for a
thread from the rest of the group.
Fix the case where a thread does an exec. It is almost nonsense for a thread
to modify the other threads address space by an exec, so we
now automatically divorce the address space before modifying it.
space. (!)
Have each process use the kernel stack and pcb in the kvm space. Since
the stacks are at a different address, we cannot copy the stack at fork()
and allow the child to return up through the function call tree to return
to user mode - create a new execution context and have the new process
begin executing from cpu_switch() and go to user mode directly.
In theory this should speed up fork a bit.
Context switch the tss_esp0 pointer in the common tss. This is a lot
simpler since than swithching the gdt[GPROC0_SEL].sd.sd_base pointer
to each process's tss since the esp0 pointer is a 32 bit pointer, and the
sd_base setting is split into three different bit sections at non-aligned
boundaries and requires a lot of twiddling to reset.
The 8K of memory at the top of the process space is now empty, and unmapped
(and unmappable, it's higher than VM_MAXUSER_ADDRESS).
Simplity the pmap code to manage process contexts, we no longer have to
double map the UPAGES, this simplifies and should measuably speed up fork().
The following parts came from John Dyson:
Set PG_G on the UPAGES that are now in kernel context, and invalidate
them when swapping them out.
Move the upages object (upobj) from the vmspace to the proc structure.
Now that the UPAGES (pcb and kernel stack) are out of user space, make
rfork(..RFMEM..) do what was intended by sharing the vmspace
entirely via reference counting rather than simply inheriting the mappings.
The typo was detected once apon a time with the -Wunused compile option.
The result was that a block of code for implementing
madvise(.. MADV_SEQUENTIAL..) behavior was "dead" and unused, probably
negating the effect of activating the option.
Reviewed by: dyson
by Alan Cox <alc@cs.rice.edu>, and his description of the problem.
The bug was primarily in procfs_mem, but the mistake likely happened
due to the lack of vm system support for the operation. I added
better support for selective marking of page dirty flags so that
vm_map_pageable(wiring) will not cause this problem again.
The code in procfs_mem is now less bogus (but maybe still a little
so.)
centric rather than VM-centric to fix a problem with errors not being
detectable when the header is read.
Killed exech_map as a result of these changes.
There appears to be no performance difference with this change.
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.
The system boots and can mount UFS filesystems.
Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.
Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>
the page to be unbusy, and it caused some algorithmic problems
as a result. There were some other problems with it also, so
this is a general cleanup of the code.
Submitted by: Douglas Crosher <dtc@scrooge.ee.swin.oz.au> and myself.
when allocating memory for network buffers at interrupt time. This is due
to inadequate checking for the new mcl_map. Fixed by merging mb_map and
mcl_map into a single mb_map.
Reviewed by: wollman
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
anymore with the "full" collapse fix that we added about 1yr ago!!! The
code has been removed by optioning it out for now, so we can put it back
in ASAP if any problems are found.
and objects. Previously, "fancy" memory management techniques
such as that used by the M3 RTS would have the tendancy of chopping
up processes allocated memory into lots of little objects. Alan
has come up with some improvements to migtigate the sitution to
the point where even the M3 RTS only has one object for bss and
it's managed memory (when running CVSUP.) (There are still cases where the
situation isn't improved when the system pages -- but this is much much
better for the vast majority of cases.) The system will now be able
to much more effectively merge map entries.
Submitted by: Alan Cox <alc@cs.rice.edu>
also implies VM_PROT_EXEC. We support it that way for now,
since the break system call by default gives VM_PROT_ALL. Now
we have a better chance of coalesing map entries when mixing
mmap/break type operations. This was contributing to excessive
numbers of map entries on the modula-3 runtime system. The
problem is still not "solved", but the situation makes more
sense.
Eventually, when we work on architectures where VM_PROT_READ
is orthogonal to VM_PROT_EXEC, we will have to visit this
issue carefully (esp. regarding security issues.)
maps. Additionally, eliminate the map->hint distortion
associated with useracc. That may/may-not be the "right"
thing to do -- but time will tell.
Submitted by: Partially by Alan Cox <alc@cs.rice.edu>
vm_map_simplify and vm_map_simplify_entry. Make vm_map_simplify_entry
handle wired maps so that we can get rid of vm_map_simplify. Modify
the callers of vm_map_simplify to properly use vm_map_simplify_entry.
Submitted by: Alan Cox <alc@cs.rice.edu>
has the negative effect of disabling some map optimizations. This
patch defers the creation of the object until it needs to be at fault time.
Submitted by: Alan Cox <alc@cs.rice.edu>
that we do allow mlock to span unallocated regions (of course, not
mlocking them.) We also allow mlocking of RO regions (which the old
code couldn't.) The restriction there is that once a RO region is
wired (mlocked), it cannot be debugged (or EVER written to.)
Under normal usage, the new mlock code will be a significant improvement
over our old stuff.
that map entries are coalesced when appropriate. Also, conditionalize
some code that is currently not used in vm_map_insert. This mod
has been added to eliminate unnecessary map entries in buffer map.
Additionally, there were some cases where map coalescing could be done
when it shouldn't. That problem has been resolved.
scheme. Additionally, add the capability for checking for unexpected
kernel page faults. The maximum amount of kva space for buffers hasn't
been decreased from where it is, but it will now be possible to do so.
This scheme manages the kva space similar to the buffers themselves. If
there isn't enough kva space because of usage or fragementation, buffers
will be reclaimed until a buffer allocation is successful. This scheme
should be very resistant to fragmentation problems until/if the LFS code
is fixed and uses the bogus buffer locking scheme -- but a 'fixed' LFS
is not likely to use such a scheme.
Now there should be NO problem allocating buffers up to MAXPHYS.
problem of allocating contiguous buffer memory in general, but
make it much more likely to work at boot-up time. The best
chance for an LKM-type load of a sound driver is immediately
after the mount of the root filesystem.
This appears to work for a 64K allocation on an 8MB system.
it breaks in the DEVFS_ROOT case. replicate a bit too much of bdevvp()
in here to circumvent the problem. The real problem is the magic that
lives in bdevsw[1].
