risky because the "current time" is supposed to be fed to the card during
initialization, and the current time is supposed to be put into each command
that is sent to the card. Hopefully either the card doesn't actually care
about the timestamps, or it doesn't care about the absolute values so long
and the relative values are consistent. Not an MFC candidate until more
thorough testing can be done.
While I'm here add KASSERT(9) to notify failure of SYSUNINIT handler.
Reported by: Ben Kaduk < minimarmot AT gmail DOT com >
Tested by: Ben Kaduk < minimarmot AT gmail DOT com >
o Attach AX88x90's MII bus to system, and require its presence.
o Reorg the mii code a little, and move more of it into pccard attachment.
o Eliminate ed_pccard_{read,write}_attrmem in favor of a more appropriate
function in the pccard layer.
o Update comments to reflect knowledge gained.
o Update how re recognize a NE-2000 ROM. I found a couple of different
datasheets that define the structure of the PROM data, so the code's
old heuristics have been removed, and comments updated to reflect the
structure.
o Eliminate work around for EC2T. It is no longer needed, and was wrong
headed since the EC2T has a Winbound 82C926C in it, not a AX88x90.
o Add copyright to if_ed_pccard.c, since I believe I've re-written more than
3/4 of it.
# With these changes, all of my 20-odd ed based cards work, except for the
# NetGear FA-410, and I'm pretty sure that's a MII/PHY problem.
attach to. These cards are combo cards (in that they have a modem
inside of them), but not true MFC cards. Full support of these cards
will have to wait until we can pick the config to use and for the PFC
support that I have brewing.
fifo_kqfilter() VOP implementations, since they in theory are used
only on open file descriptors, in which case the ioctls are via
fifo_ioctl_f() and kqueue requests are via fifo_kqfilter_f().
Generate warnings if they are entered for now. These printf()
calls should become panic() calls.
Annotate and re-implement fifo_ioctl_f(): don't arbitrarily
forward ioctls to the socket layer, only forward the ones we
explicitly support for fifos. In the case of FIONREAD, don't
forward the request to the write socket on a read-write fifo, or
the read result is overwritten. Annotate a nasty case for the
undefined POSIX O_RDWR on fifos, in which failure of the second
ioctl will result in the socket pair being in an inconsistent
state.
Assert copyright as I find myself rewriting non-trivial parts of
fifofs.
MFC after: 3 days
be held when entering a kqueue filter for fifos via a socket buffer
event: as such, assert the lock unconditionally rather than acquiring
it conditionall.
MFC after: 3 days
1) fifo_kqfilter() is not actually ever used, it likely should be GC'd.
2) fifo_kqfilter_f() doesn't implement EVFILT_VNODE, so detecting events
on the underlying vnode for a fifo no longer works (it did in 4.x).
Likely, fifo_kqfilter_f() should forward the request to the VFS using
fp->f_vnode, which would work once fifo_kqfilter() was detached from
the vnode operation vector (removing the fifo override).
Discussed with: phk
used when a read filter is requested on a write-only fifo descriptor, or
a write filter is requested on a read-only fifo descriptor. This
permits the filters to be registered, but never raises the event, which
causes kqueue behavior for fifos to more closely match similar semantics
for poll and select, which permit testing for the condition even though
the condition will never be raised, and is consistent with POSIX's notion
that a fifo has identical semantics to a one-way IPC channel created
using pipe() on most operating systems.
The fifo regression test suite can now run to completion on HEAD without
errors.
MFC after: 3 days
- Remove an assertion in sound.c, it's not needed (and causes a panic now).
From the conversation via mail between glebius and Ariff:
---snip---
> Well, but which mutex protects now? Do we own anything else
> in pcm_chnalloc()? I see some queue(4) macros in pcm_chnalloc(),
> they should be protected, shouldn't they?
Queue insertion/removal occur during
1) driver loading (which is pretty much single thread /
sequential) or unloading (mutex protected, bail out if there is
any channel with refcount > 0 or busy).
2) vchan_create()/destroy(), (which is *sigh* quite complicated), but
somehow protected by 'master'/parent channel mutex. Other
thread cannot add/remove vchan (or even continue traversing
that queue) unless it can acquire parent channel mutex.
---snip---
Fix the locking in dsp.c to prevent a LOR (AFAIK not on the LOR page).
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested with: INVARIANTS[1] and DIAGNOSTICS[2]
Tested by: netchild [1,2], David Reid <david@jetnet.co.uk> [1]
'buffers' pending NMIs from multiple interrupting PMCs and delivers
them serially.
Reported by: Olivier Crameri <olivier.crameri@epfl.ch>
MFC after: 3 days
according to POSIX, not to mention the fact that it doesn't make sense
(and hence isn't really implemented). This causes the fifo_misc
regression test to succeed.
file descriptor. Otherwise, the read end of a fifo might return that it
is writable (which it isn't).
Only poll the fifo for write events if the fifo attached to a writable
file descriptor. Otherwise, the write end of a fifo might return that
it is readable (which it isn't).
In the event that a file is FREAD|FWRITE (which is allowed by POSIX, but
has undefined behavior), we poll for both.
MFC after: 3 days
to poll the write socket for, the fifo polling code proceeded to poll
for the complete set of events. Use 'levents' instead of 'events' as
the argument to poll, and only poll the write socket if there is
interest in write events.
MFC after: 3 days
while sleeping to allocate fifo state: due to using the vnode lock to
serialize access to a fifo during open, it shouldn't happen (tm).
MFC after: 3 days
