On some architectures, the structures returned by PT_GET*REGS were not
fully populated and could contain uninitialized stack memory. The same
issue existed with the register files in procfs.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Security: kernel stack memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18421
loader has been supporting large_dnode for some time, no need to block the
feature for boot dataset.
Reviewed by: avg
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18391
It's possible the fdt pointer was passed in via the metadata, as is done in
ubldr. Check for the fdt here, instead of working with a NULL fdt, and
panicking.
The metadata pointer will almost never be at or above 'btext', as btext is a
relocated symbol, so will be based at VM_MIN_KERNEL_ADDRESS, not at
KERNBASE. Check the address against kernload, where the kernel is
physically loaded.
Add generic implementation for bus_deactivate_resource method. Without
it bus_release_resource fails with "Failed to release active resource"
message
MFC after: 1 week
The object size is set in the dsp_mmap_single() which provides the
range limit by vm_fault().
Reported by: C Turt <ecturt@gmail.com>
Reviewed by: alc, markj
admbug: 781
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The type represents byte offset in the vm_object_t data space, which
does not span negative offsets in FreeBSD VM. The change matches byte
offset signess with the unsignedness of the vm_pindex_t which
represents the type of the page indexes in the objects.
This allows to remove the UOFF_TO_IDX() macro which was used when we
have to forcibly interpret the type as unsigned anyway. Also it fixes
a lot of implicit bugs in the device drivers d_mmap methods.
Reviewed by: alc, markj (previous version)
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Fix p-state setting on Power8 by removing the accidental double-indirection of
the pstate_ids table.
The pstate_ids table comes from the OF property "ibm,pstate-ids." On Power9,
the values happen to be identical to the indices, so the extra indirection was
harmless. On Power8, the values were out of the range [0, npstates], so
pmcr_set() would fail the spec[0] range check with EINVAL.
While here, include both the value and index in the driver-specific register
array as spec[0] and spec[1] respectively. They're redundant, but relatively
harmless, and it may aid debugging.
While here, fix the range check to exclude the index npstates, which is one
past the last valid index.
PR: 233693
Reported and tested by: sbruno
Reviewed by: jhibbits
is dead). This includes collaterally removing code shared by HP/UX,
SGI, and Linux, where IP Filter will in all likelihood for various
reasons never run again.
MFC after: 1 week
PLLs on the RK3399 are different than the ones on the RK3328.
Add a new type and some dedicated recalc and set_freq functions.
Rename the RK3328 dedicated rk_clk_pll function with rk3328_ prefix.
MFC after: 1 month
following the MFV of r254219 into r255332. In addition the 'FreeBSD'
macro was never defined in ipfilter 5.1.2 thus it never would have
been enabled in the first place.
This work is prompted by a general cleanup of the IP Filter code
prompted by working to resolve a PR. More to follow.
MFC after: 1 week
If user configured the maxswapzone tunable, just take the literal
value for the initial zone sizing attempt. Before, it was only
possible to reduce the zone by the tunable.
While there, correct the message which was not correct when zone
creation rounded the size up.
Reported by: jmg
Reviewed by: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18381
See the review for sample test results.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18401
In rare situations[*] it's possible for two different interfaces to have
the same name. This confuses pf, because kifs are indexed by name (which
is assumed to be unique). As a result we can end up trying to
if_rele(NULL), which panics.
Explicitly checking the ifp pointer before if_rele() prevents the panic.
Note pf will likely behave in unexpected ways on the the overlapping
interfaces.
[*] Insert an interface in a vnet jail. Rename it to an interface which
exists on the host. Remove the jail. There are now two interfaces with
the same name in the host.
Fix reporting of SS_ONSTACK in nested signal delivery when sigaltstack()
is used on some architectures.
Add a unit test for this. I tested the test by introducing the bug
on amd64. I did not test it on other architectures.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18347
Handling sizes of > 32 backwards will be updated later.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18387
Limiting the length to 2048 bytes seems to be acceptable, since
the values used right now are using 8 bytes.
Reviewed by: glebius, bz, rrs
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18366
IFNET_RLOCK_NOSLEEP() is epoch_enter_preempt() in FreeBSD 12+. Holding
it in sysctl_rtsock() doesn't protect us from ifnet unlinking, because
unlinking occurs with IFNET_WLOCK(), that is rw_wlock+sx_xlock, and it
doesn check that concurrent code is running in epoch section. But while
we are in epoch section, we should be able to do access to ifnet's
fields, even it was unlinked. Thus do not change if_addr and if_hw_addr
fields in ifnet_detach_internal() to NULL, since rtsock code can do
access to these fields and this is allowed while it is running in epoch
section.
This should fix the race, when ifnet_detach_internal() unlinks ifnet
after we checked it for IFF_DYING in sysctl_dumpentry.
Move free(ifp->if_hw_addr) into ifnet_free_internal(). Also remove the
NULL check for ifp->if_description, since free(9) can correctly handle
NULL pointer.
MFC after: 1 week
This is the frequency of the cpu on the Pinebook so add it to make
cpufreq find the current setting.
Note that this dtbo on the Pinebook doesn't work right now as u-boot
dtb doesn't have symbols and so it fails to apply. Linux 4.20 have
the dts and will be imported once taggued.
MFC after: 1 month
X-MFC with: r341268
Early processing of a packet on transmit may change last seen
VLAN TCI in the queue context. If such a packet is eventually
dropped, last seen VLAN TCI must be set to its previous value.
Submitted by: Ivan Malov <Ivan.Malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18288
If an event handler requested an abort, only the inner loop was
guarenteed to be broken out of - the outer loop could continue
if total == batch.
Fix this by poisoning batch to ensure it is different to total.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18287
Revise the external port calculation to support all
X2 port modes. The previous algorithm could not
handle different port numbering schemes on each cage.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18285
Correct annotations where NULL input can be permitted
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18284
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18283
In efx_mcdi_phy_module_get_info() probe the
transceiver identification byte rather than assume
the module matches the fixed port type. This
supports scenarios such as a SFP mounted in a QSFP
port via a QSA module.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18282
Add a function which makes an MCDI GET_LINK request and
packages up the results. Currently, the get-link function
is triggered from several entry points which then pass
on or store selected parts of the data. When the driver
needs to obtain the current link state, it is more
efficient to do this in a single call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18281
Previously only some of the code was guarded by this which caused
a build error when EFSYS_OPT_RX_SCALE is 0 (e.g. in manftest).
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18280
Limit the port mode bandwidth calculations by the maximum
reported link speed. This system detects 25G vs 10G cards,
and 100G port modes vs 40G.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18279
Change the interface to ef10_nic_get_port_mode_bandwidth()
so more NIC information can be used to infer bandwidth
requirements. Huntington calculations separated out
completely.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18278
Add cases for the new port modes supported by X2 NICs.
Lane bandwidth is calculated for pre-X2 cards so is an
underestimate for X2 in 25G/100G modes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18277
>From Medford onwards, the newer constants enumerating
port modes should be used.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18276
Adjust data types in interface to permit the complete
module information buffer to be obtained in a single
call.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18275
Rearrange so the valid addresses are visible to the caller.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18274
Adjust bounds so the interface supports reading
the last available byte of data.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18273
This statistic should include 64byte and smaller frames.
Fix EF10 calculation to match Siena code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18271
The capability bits to request FEC modes are implicitly valid
when the corresponding FEC mode is a supported capability.
Drivers expect that it is only valid to advertise those
capabilities explicitly marked as supported. The capabilities
reported by firmware is modified with the implicit capabilities
to present the explicit model to drivers.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18270
