patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
messages before accessing message fields that may not be present,
removing dead/duplicate/misleading code along the way.
Document the message format for each routing socket message in
route.h.
Fix a bug in usr.bin/netstat introduced in r287351 that resulted in
pointer computation with essentially random 16-bit offsets and
dereferencing of the results.
Reviewed by: ae
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10330
if_vlan(4) interfaces inherit IPv4 checksum offloading flags from the
parent when VLAN_HWCSUM and VLAN_HWTAGGING flags are present on the
parent interface. Do the same for IPv6 checksum offloading flags.
Reported by: Harry Schmalzbauer
Reviewed by: np, gnn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10356
administrator.
This restores the behavior that was prior to r274246.
No objection from: #network
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10215
so that we can use it in iflib to detect pause frames.
The igb(4) driver definitely used to use this in its old timer function and
I see no reason to restrict it to that driver only.
Sponsored by: Limelight Networks
Make PFIL's lock global and use it for this purpose.
This reduces the number of locks needed to acquire for each packet.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
No objection from: #network
Differential Revision: https://reviews.freebsd.org/D10154
Prevent possible races in the pf_unload() / pf_purge_thread() shutdown
code. Lock the pf_purge_thread() with the new pf_end_lock to prevent
these races.
Use a shared/exclusive lock, as we need to also acquire another sx lock
(VNET_LIST_RLOCK). It's fine for both pf_purge_thread() and pf_unload()
to sleep,
Pointed out by: eri, glebius, jhb
Differential Revision: https://reviews.freebsd.org/D10026
- unconditionally enable BUS_DMA on non-x86 architectures
- speed up rxd zeroing via customized function
- support out of order updates to rxd's
- add prefetching to hardware descriptor rings
- only prefetch on 10G or faster hardware
- add seperate tx queue intr function
- preliminary rework of NETMAP interfaces, WIP
Submitted by: Matt Macy <mmacy@nextbsd.org>
Sponsored by: Limelight Networks
Currently are defined three scopes: global, ifnet, and pcb.
Generic security policies that IKE daemon can add via PF_KEY interface
or an administrator creates with setkey(8) utility have GLOBAL scope.
Such policies can be applied by the kernel to outgoing packets and checked
agains inbound packets after IPsec processing.
Security policies created by if_ipsec(4) interfaces have IFNET scope.
Such policies are applied to packets that are passed through if_ipsec(4)
interface.
And security policies created by application using setsockopt()
IP_IPSEC_POLICY option have PCB scope. Such policies are applied to
packets related to specific socket. Currently there is no way to list
PCB policies via setkey(8) utility.
Modify setkey(8) and libipsec(3) to be able distinguish the scope of
security policies in the `setkey -DP` listing. Add two optional flags:
'-t' to list only policies related to virtual *tunneling* interfaces,
i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL
scope. By default policies from all scopes are listed.
To implement this PF_KEY's sadb_x_policy structure was modified.
sadb_x_policy_reserved field is used to pass the policy scope from the
kernel to userland. SADB_SPDDUMP message extended to support filtering
by scope: sadb_msg_satype field is used to specify bit mask of requested
scopes.
For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy
is used to pass if_ipsec's interface if_index to the userland. For GLOBAL
policies sadb_x_policy_priority is used only to manage order of security
policies in the SPDB. For IFNET policies it is not used, so it can be used
to keep if_index.
After this change the output of `setkey -DP` now looks like:
# setkey -DPt
0.0.0.0/0[any] 0.0.0.0/0[any] any
in ipsec
esp/tunnel/87.250.242.144-87.250.242.145/unique:145
spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0
refcnt=1
# setkey -DPg
::/0 ::/0 icmp6 135,0
out none
spid=5 seq=1 pid=872 scope=global
refcnt=1
No objection from: #network
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9805
that this shouldn't go in. I was unaware when I merged the pull
request. I don't wish to upset the status quo, so backout per
project practice.
Pull Request: https://github.com/freebsd/freebsd/pull/92
Noted by: hrs@
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
In particular, don't set the synchronized bit for the peer unless it truly
appears to be synchronized to us. Also, don't set our own synchronized bit
unless we have actually seen a remote system.
Prior to this change, we were seeing some strange behavior, such as:
1. We send an advertisement with the Activity, Aggregation, and Default
flags, followed by an advertisement with the Activity, Aggregation,
Synchronization, and Default flags. However, we hadn't seen an
advertisement from another peer and were still advertising the default
(NULL) peer. A closer examination of the in-kernel data structures (using
kgdb) showed that the system had added the default (NULL) peer as a valid
aggregator for the segment.
2. We were receiving an advertisement from a peer that included the
default (NULL) peer instead of including our system information. However,
we responded with an advertisement that included the Synchronization flag
for both our system and the peer. (Since the peer's advertisement did not
include our system information, we shouldn't add the synchronization bit
for the peer.)
This patch corrects those two items.
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9485
Implement get_pcpu() for amd64/sparc64/mips/powerpc, and use it to
replace pcpu_find(curcpu) in MI code.
Reviewed by: andreast, kan, lidl
Tested by: lidl(mips, sparc64), andreast(powerpc)
Differential Revision: https://reviews.freebsd.org/D9587
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
The switch to get_pcpu() in MI code seems to cause hangs on MIPS.
Back out until we can get a better idea of what's happening there.
Reported by: kan, lidl
structure:
if_gethwtsomax(), if_sethwtsomax() - if_hw_tsomax
if_gethwtsomaxsegcount(), if_sethwtsomaxsegcount() - if_hw_tsomaxsegcount
if_gethwtsomaxsegsize(), if_sethwtsomaxsegsize() - if_hw_tsomaxsegsize
Update em and vnic drivers which had already been coverted to use accessor
functions for the other ifnet structure members.
Reviewed by: erj
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8544
This would enqueue an event to send the gratuitous arp on a dying lagg
interface without any physical ports attached to it.
Apart from that, the taskqueue_drain() on lagg_clone_destroy() runs too
late, when the ifp data structure is already freed. Fix that too.
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
convention for interfaces, because only one stf(4) interface can exist
in the system.
This disallow the use of unit numbers different than 0, however, it is
possible to create the clone without specify the unit number (wildcard).
In the wildcard case we must update the interface name before return.
This fix an infinite recursion in pf code that keeps track of network
interfaces and groups:
1 - a group for the cloned type of the interface is added (stf in this
case);
2 - the system will now try to add an interface named stf (instead of
stf0) to stf group;
3 - when pfi_kif_attach() tries to search for an already existing 'stf'
interface, the 'stf' group is returned and thus the group is added
as an interface of itself;
This will now cause a crash at the first attempt to traverse the groups
which the stf interface belongs (which loops over itself).
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
This interface type ("a parent interface of wlanX") is not used since
r287197
Reviewed by: adrian, glebius
Differential Revision: https://reviews.freebsd.org/D9308
Thank glebius for pointing this out:
"The network stuff shall not be added to sys/eventhandler.h"
Reviewed by: David_A_Bright_DELL.com, sephe, glebius
Approved by: sephe (mentor)
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D9345
We found routing performance dropped significantly when configuring
FreeBSD as a router, we are applying the following changes in order to
resolve those issues and hopefully perform better.
- don't prefetch the flags array, we usually don't need it
- prefetch the next cache line of each of the software descriptor arrays as
well as the first cache line of each of the next four packets' mbufs and
clusters
- reduce max copy size to 63 bytes
- convert rx soft descriptors from array of structures to a structure of arrays
- update copyrights
Submitted by: Matt Macy <mmacy@nextbsd.org>
