Commit Graph

220 Commits

Author SHA1 Message Date
kib
36259bf9a2 Give the page allocations initiated by the swap-backed md(4) a higher
priority.  If the write is requested by a system daemon, sleeping
there would starve resources and cause deadlock.

Reported and tested by:	pho
Sponsored by:	The FreeBSD Foundation
2013-08-30 20:12:23 +00:00
kib
ba12eedccd Remove the deprecated VM_ALLOC_RETRY flag for the vm_page_grab(9).
The flag was mandatory since r209792, where vm_page_grab(9) was
changed to only support the alloc retry semantic.

Suggested and reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
2013-08-22 07:39:53 +00:00
attilio
16c7563cf4 The soft and hard busy mechanism rely on the vm object lock to work.
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.

Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
  and vm_page_grab are being executed.  This will be very helpful
  once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag

The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.

Sponsored by:	EMC / Isilon storage division
Discussed with:	alc
Reviewed by:	jeff, kib
Tested by:	gavin, bapt (older version)
Tested by:	pho, scottl
2013-08-09 11:11:11 +00:00
kib
6023beb9de Fix the data corruption on the swap-backed md.
Assign the rv variable a success code if the pager was not asked for
the page.  Using an error code from the previous processed page caused
zeroing of the valid page, when e.g. the previous page was not
available in the pager.

Reported by:	lstewart
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2013-05-24 09:48:42 +00:00
kib
4b74a4a190 Do not declare that preloaded md(4) supports unmapped bio requests, it
does not.

Reported by:	<mh@kernel32.de>
Sponsored by:	The FreeBSD Foundation
2013-04-02 19:39:31 +00:00
kib
23f577dda4 Support unmapped i/o for the md(4).
The vnode-backed md(4) has to map the unmapped bio because VOP_READ()
and VOP_WRITE() interfaces do not allow to pass unmapped requests to
the filesystem. Vnode-backed md(4) uses pbufs instead of relying on
the bio_transient_map, to avoid usual md deadlock.

Sponsored by:	The FreeBSD Foundation
Tested by:	pho, scottl
2013-03-19 14:53:23 +00:00
attilio
15bf891afe Rename VM_OBJECT_LOCK(), VM_OBJECT_UNLOCK() and VM_OBJECT_TRYLOCK() to
their "write" versions.

Sponsored by:	EMC / Isilon storage division
2013-02-20 12:03:20 +00:00
attilio
658534ed5a Switch vm_object lock to be a rwlock.
* VM_OBJECT_LOCK and VM_OBJECT_UNLOCK are mapped to write operations
* VM_OBJECT_SLEEP() is introduced as a general purpose primitve to
  get a sleep operation using a VM_OBJECT_LOCK() as protection
* The approach must bear with vm_pager.h namespace pollution so many
  files require including directly rwlock.h
2013-02-20 10:38:34 +00:00
jh
8800730625 Print correct unit number when attaching preloaded memory disks.
Retire now unused mdunits variable.
2012-11-21 17:05:57 +00:00
jh
e82a3d82c2 Disallow attaching preloaded memory disks via ioctl.
- The feature is dangerous because the kernel code didn't check
  validity of the memory address provided from user space.
- It seems that mdconfig(8) never really supported attaching preloaded
  memory disks.
- Preloaded memory disks are automatically attached during md(4)
  initialization. Thus there shouldn't be much use for the feature.

PR:		kern/169683
Discussed on:	freebsd-hackers
2012-11-21 16:56:47 +00:00
kib
a6087f0bd1 Zero the newly allocated md(4) swap-backed page to prevent random
kernel memory leakage to userspace. For the typical use, when a
filesystem put on the md disk, the change only results in CPU and
memory bandwidth spent to zero the page, since filsystems make sure
that user never see unwritten content.  But if md disk is used as raw
device by userspace, the garbage is exposed.

Reported by:	Paul Schenkeveld <freebsd@psconsult.nl>
MFC after:	2 weeks
2012-11-08 03:17:41 +00:00
marcel
85823a3b2e Add a MD_ROOT_FSTYPE kernel option. The option specifies the
file system part for the MD_ROOT mount string. Hardcoding the
the file system type as "ufs" is too restrictive.
2012-11-03 21:20:55 +00:00
kib
560aa751e0 Remove the support for using non-mpsafe filesystem modules.
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.

The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.

Conducted and reviewed by:	attilio
Tested by:	pho
2012-10-22 17:50:54 +00:00
kib
cac2fe116f After the PHYS_TO_VM_PAGE() function was de-inlined, the main reason
to pull vm_param.h was removed.  Other big dependency of vm_page.h on
vm_param.h are PA_LOCK* definitions, which are only needed for
in-kernel code, because modules use KBI-safe functions to lock the
pages.

Stop including vm_param.h into vm_page.h. Include vm_param.h
explicitely for the kernel code which needs it.

Suggested and reviewed by:	alc
MFC after:    2 weeks
2012-08-05 14:11:42 +00:00
kib
02de659fe8 Remove verbose unused commented out debugging printf.
MFC after:	1 week
Reviewed by:	alc
2012-08-04 18:10:04 +00:00
jh
b2c4245d7e Disallow sectorsize larger than MAXPHYS and mediasize smaller than
sectorsize.

PR:		169947
Submitted by:	Filip Palian (original version)
Reviewed by:	kib
2012-08-02 15:05:34 +00:00
trasz
1a80449f25 Make it possible to resize md(4) devices.
Reviewed by:	kib
Sponsored by:	FreeBSD Foundation
2012-07-07 20:32:21 +00:00
eadler
3072a90209 Document a large number of currently undocumented sysctls. While here
fix some style(9) issues and reduce redundancy.

PR:		kern/155491
PR:		kern/155490
PR:		kern/155489
Submitted by:	Galimov Albert <wtfcrap@mail.ru>
Approved by:	bde
Reviewed by:	jhb
MFC after:	1 week
2011-12-13 00:38:50 +00:00
ae
f151da3d71 Add information about MD_READONLY and MD_COMPRESS flags to the
configuration dump.

MFC after:	1 week
2011-10-31 10:53:27 +00:00
ae
7f1d0d3f37 Include sys/sbuf.h directly. 2011-07-11 05:19:28 +00:00
mdf
3d3b036f95 Move the ZERO_REGION_SIZE to a machine-dependent file, as on many
architectures (i386, for example) the virtual memory space may be
constrained enough that 2MB is a large chunk.  Use 64K for arches
other than amd64 and ia64, with special handling for sparc64 due to
differing hardware.

Also commit the comment changes to kmem_init_zero_region() that I
missed due to not saving the file.  (Darn the unfamiliar development
environment).

Arch maintainers, please feel free to adjust ZERO_REGION_SIZE as you
see fit.

Requested by:	alc
MFC after:	1 week
MFC with:	r221853
2011-05-13 19:35:01 +00:00
mdf
9465c34001 Usa a globally visible region of zeros for both /dev/zero and the md
device.  There are likely other kernel uses of "blob of zeros" than can
be converted.

Reviewed by:	alc
MFC after:	1 week
2011-05-13 18:48:00 +00:00
des
f99737eb7b Implement BIO_DELETE for vnode devices by simply overwriting the deleted
sectors with all-zeroes.

The zeroes come from a static buffer; null(4) uses a dynamic buffer for
the same purpose (for /dev/zero).  It might be a good idea to have a
static, shared, read-only all-zeroes page somewhere in the kernel that
md(4), null(4) and any other code that needs zeroes could use.

Reviewed by:	kib
MFC after:	3 weeks
2011-04-29 21:18:41 +00:00
marcel
9e4a891196 Use the preload_fetch_addr() and preload_fetch_size() convenience
functions and only create the MD device when we have a non-zero
pointer and size.

Sponsored by: Juniper Networks
2011-02-09 19:31:10 +00:00
kib
83917be69e Add support for BIO_DELETE on swap-backed md(4). In the case of BIO_DELETE
covering the whole page, free the page. Otherwise, clear the region and
mark it clean. Not marking the page dirty could reinstantiate cleared
data, but it is allowed by BIO_DELETE specification and saves unneeded
write to swap.

Reviewed by:	alc
Tested by:	pho
MFC after:	2 weeks
2011-01-27 16:10:25 +00:00
kib
25f8e1e95f Bio shall not be accessed after g_io_deliver(9).
Reported and tested by:	pho
Reviewed by:	ae, phk
MFC after:	1 week
2011-01-25 14:00:30 +00:00
kib
dc5706ffe3 Add missed ().
Noted by:	alc
MFC after:	3 days
2011-01-19 16:48:07 +00:00
alc
6614c76cb4 There is no point in calling vm_object_set_writeable_dirty() on an object
that is definitively known to be swap backed since its only effects are on
vnode-backed objects.

Reviewed by:	kib
2011-01-19 15:43:54 +00:00
kib
cbd7f9d931 Add reporting of GEOM::candelete BIO_GETATTR for md(4) and geom_disk(4).
Non-zero value of attribute means that device supports BIO_DELETE.

Suggested and reviewed by:	pjd
Tested by:	pho
MFC after:	1 week
2010-12-29 12:11:07 +00:00
kib
41c444747f Add sysctl vm.md_malloc_wait, non-zero value of which switches malloc-backed
md(4) to using M_WAITOK malloc calls.

M_NOWAITOK allocations may fail when enough memory could be freed, but not
immediately. E.g. SU UFS becomes quite unhappy when metadata write return
error, that would happen for failed malloc() call.

Reported and tested by:	pho
MFC after:	1 week
2010-12-29 11:39:15 +00:00
marcel
9d3ef80ee1 Allow the MDIOCATTACH ioctl operation to originate from within the kernel.
To protect against malicious software, we demand that the file name is at
a particular location (i.e. appended to the mdio structure) for it to be
treated as in-kernel.
2010-10-18 04:26:32 +00:00
jh
2aedf3a2fe - Remove some extra white space.
- Wrap g_md_dumpconf() prototype to 80 columns.
2010-07-26 10:37:14 +00:00
jh
1a7a2445e6 Convert md(4) to use alloc_unr(9) and alloc_unr_specific(9) for unit
number allocation. The old approach had some problems such as it allowed
an overflow to occur in the unit number calculation.

PR:		kern/122288
2010-07-22 10:24:28 +00:00
kib
cc677e94f4 Calculate nshift only once.
Also noted by:	avg
MFC after:	1 week
2010-07-06 18:22:57 +00:00
alc
c907b418fb Eliminate unnecessary page queues locking. 2010-06-15 18:37:31 +00:00
kib
44c384aeff Lock the page around vm_page_activate() and vm_page_deactivate() calls
where it was missed. The wrapped fragments now protect wire_count with
page lock.

Reviewed by:	alc
2010-05-03 20:31:13 +00:00
trasz
e9d23bc38a Fix panic on invalid 'mdconfig -at preload' usage.
PR:		kern/80136
2010-02-27 10:41:30 +00:00
antoine
bfd388c026 (S)LIST_HEAD_INITIALIZER takes a (S)LIST_HEAD as an argument.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.

PR:		137213
Submitted by:	Eygene Ryabinkin (initial version)
MFC after:	1 month
2009-12-28 22:56:30 +00:00
kib
fa686c638e Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.

The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.

The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.

The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).

Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.

In collaboration with:	pho
Reviewed by:	alc
Approved by:	re (kensmith)
2009-06-23 20:45:22 +00:00
marcel
8b09116a5a Add cpu_flush_dcache() for use after non-DMA based I/O so that a
possible future I-cache coherency operation can succeed. On ARM
for example the L1 cache can be (is) virtually mapped, which
means that any I/O that uses temporary mappings will not see the
I-cache made coherent. On ia64 a similar behaviour has been
observed. By flushing the D-cache, execution of binaries backed
by md(4) and/or NFS work reliably.
For Book-E (powerpc), execution over NFS exhibits SIGILL once in
a while as well, though cpu_flush_dcache() hasn't been implemented
yet.

Doing an explicit D-cache flush as part of the non-DMA based I/O
read operation eliminates the need to do it as part of the
I-cache coherency operation itself and as such avoids pessimizing
the DMA-based I/O read operations for which D-cache are already
flushed/invalidated. It also allows future optimizations whereby
the bcopy() followed by the D-cache flush can be integrated in a
single operation, which could be implemented using on-chips DMA
engines, by-passing the D-cache altogether.
2009-05-18 18:37:18 +00:00
jhb
520acdaf69 Add a new internal mount flag (MNTK_EXTENDED_SHARED) to indicate that a
filesystem supports additional operations using shared vnode locks.
Currently this is used to enable shared locks for open() and close() of
read-only file descriptors.
- When an ISOPEN namei() request is performed with LOCKSHARED, use a
  shared vnode lock for the leaf vnode only if the mount point has the
  extended shared flag set.
- Set LOCKSHARED in vn_open_cred() for requests that specify O_RDONLY but
  not O_CREAT.
- Use a shared vnode lock around VOP_CLOSE() if the file was opened with
  O_RDONLY and the mountpoint has the extended shared flag set.
- Adjust md(4) to upgrade the vnode lock on the vnode it gets back from
  vn_open() since it now may only have a shared vnode lock.
- Don't enable shared vnode locks on FIFO vnodes in ZFS and UFS since
  FIFO's require exclusive vnode locks for their open() and close()
  routines.  (My recent MPSAFE patches for UDF and cd9660 already included
  this change.)
- Enable extended shared operations on UFS, cd9660, and UDF.

Submitted by:	ups
Reviewed by:	pjd (ZFS bits)
MFC after:	1 month
2009-03-11 14:13:47 +00:00
alc
737844bb9e Remove unnecessary page queues locking around vm_page_wakeup(). (This
change is applicable to RELENG_7 but not RELENG_6.)

MFC after:	1 week
2009-02-22 02:50:31 +00:00
trasz
81e2127caa Add the possibility to specify "-o force" with "mdconfig -du".
Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
2009-01-10 17:17:18 +00:00
trasz
4039bb7c82 Fix forced mdconfig -du. E.g. the following would previously
result in panic:

mdconfig -af blah.img -o force
mount /dev/md0 /mnt
mdconfig -du 0

Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
2008-12-16 20:59:27 +00:00
attilio
dbf35e279f Decontextualize the couplet VOP_GETATTR / VOP_SETATTR as the passed thread
was always curthread and totally unuseful.

Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-08-28 15:23:18 +00:00
ed
5de6a45e07 Remove the distinction between device minor and unit numbers.
Even though we got rid of device major numbers some time ago, device
drivers still need to provide unique device minor numbers to make_dev().
These numbers are only used inside the kernel. They are not related to
device major and minor numbers which are visible in devfs. These are
actually based on the inode number of the device.

It would eventually be nice to remove minor numbers entirely, but we
don't want to be too agressive here.

Because the 8-15 bits of the device number field (si_drv0) are still
reserved for the major number, there is no 1:1 mapping of the device
minor and unit numbers. Because this is now unused, remove the
restrictions on these numbers.

The MAXMAJOR definition was actually used for two purposes. It was used
to convert both the userspace and kernelspace device numbers to their
major/minor pair, which is why it is now named UMINORMASK.

minor2unit() and unit2minor() have now become useless. Both minor() and
dev2unit() now serve the same purpose. We should eventually remove some
of them, at least turning them into macro's. If devfs would become
completely minor number unaware, we could consider using si_drv0 directly,
just like si_drv1 and si_drv2.

Approved by:	philip (mentor)
2008-05-29 12:50:46 +00:00
philip
a5ef2c95a1 Zero sc->vnode if mdsetcred() fails.
This fixes the panic which happens when mdcreate_vnode() calls vn_close()
and mddestroy() calls it again further down the error handling path.

Reviewed by:	kris, kib
MFC after:	3 days
2008-02-28 18:31:54 +00:00
attilio
71b7824213 VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.

KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.

Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
attilio
18d0a0dd51 vn_lock() is currently only used with the 'curthread' passed as argument.
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.

Manpage and FreeBSD_version will be updated through further commits.

As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.

Tested by:	Diego Sardina <siarodx at gmail dot com>,
		Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
sobomax
e70726e1e8 Put back devstat support that was lost during GEOM transition. Initially,
I've tried to move md(4) to use geom_disk class, like real disks do, but
this requires major rework of some of the existing features such as
configuration dumping for example. Therefore just putting devstat support
directly into md(4) seems to be optimal solution.

Now you can see md(4) stats in `systat -vm' again.

MFC after:	2 weeks
2007-11-07 22:47:41 +00:00