Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Andriy Gapon <avg@icyb.net.ua>
illumos/illumos-gate@e7e978b1f7
During the update process in sa_modify_attrs(), the sizes of existing
variably-sized SA entries are obtained from sa_lengths[]. The case where
a variably-sized SA was being replaced neglected to increment the index
into sa_lengths[], so subsequent variable-length SAs would be rewritten
with the wrong length. This patch adds the missing increment operation
so all variably-sized SA entries are stored with their correct lengths.
Another problem was that index into attr_desc[] was increased even when
an attribute was removed. If that attribute was not the last attribute,
then the last attribute was lost.
Change 294329 removed the ability to build ZFS pools that are backed by
zvols, because having that ability (even if it's not used) leads to
deadlocks. By popular demand, I'm adding an off-by-default sysctl to
reenable that ability.
Reviewed by: lidl, delphij
MFC after: Never
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4998
This is the final step required allowing to compile and to run RISC-V
kernel and userland from HEAD.
RISC-V is a completely open ISA that is freely available to academia
and industry.
Thanks to all the people involved! Special thanks to Andrew Turner,
David Chisnall, Ed Maste, Konstantin Belousov, John Baldwin and
Arun Thomas for their help.
Thanks to Robert Watson for organizing this project.
This project sponsored by UK Higher Education Innovation Fund (HEIF5) and
DARPA CTSRD project at the University of Cambridge Computer Laboratory.
FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv
Reviewed by: andrew, emaste, kib
Relnotes: Yes
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4982
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Steven Hartland <steven.hartland@multiplay.co.uk>
illumos/illumos-gate@2bad22584d
exceeds refquota
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5878fad70d
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@68ecb2ec93
This allows to do a full (non-incremental send) and receive it as a clone
of an existing dataset. It can leverage nopwrite to share blocks with the
origin. This can be used to change the relationship of datasets on the
target. For example, maybe on the source you have:
A ---- B ---- C
And you have sent to the target a full of B, and the incremental B->C:
B ---- C
You later realize that you want to have A on the target. You will have to
do a full send of A, but nopwrite can save you space on the target if you
receive it as a clone of B, assuming that A and B have some blocks inxi
common:
B ---- C
\
A
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: James Pan <jiaming.pan@yahoo.com>
illumos/illumos-gate@3502ed6e7c
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Will Andrews <will@firepipe.net>
illumos/illumos-gate@eb5bb58421
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@c71c00bbe8
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@5bdd995ddb
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Simon Klinkert <simon.klinkert@gmail.com>
illumos/illumos-gate@6575bca013
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@eaef6a96de
6292 exporting a pool while an async destroy is running can leave entries
in the deferred tree
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Fabian Keil <fk@fabiankeil.de>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
illumos/illumos-gate@a443cc80c7
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@b39b744be7
This is revert of 5693.
called from zfs_write() - one of them, through dmu_write(), was handled
correctly; the other wasn't.
Reviewed by: avg@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4923
The return value doesn't need to be checked, because nvlist_get_guid's
callers check the returned values of the guids.
Coverity CID: 1341869
MFC after: 1 week
X-MFC-With: 292066
Sponsored by: Spectra Logic Corp
Using zvols as backing devices for ZFS pools is fraught with panics and
deadlocks. For example, attempting to online a missing device in the
presence of a zvol can cause a panic when vdev_geom tastes the zvol. Better
to completely disable vdev_geom from ever opening a zvol. The solution
relies on setting a thread-local variable during vdev_geom_open, and
returning EOPNOTSUPP during zvol_open if that thread-local variable is set.
Remove the check for MUTEX_HELD(&zfsdev_state_lock) in zvol_open. Its intent
was to prevent a recursive mutex acquisition panic. However, the new check
for the thread-local variable also fixes that problem.
Also, fix a panic in vdev_geom_taste_orphan. For an unknown reason, this
function was set to panic. But it can occur that a device disappears during
tasting, and it causes no problems to ignore this departure.
Reviewed by: delphij
MFC after: 1 week
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4986
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gwr@nexenta.com>
illumos/illumos-gate@2bd7a8d078
This fixes erroneous double increments of the 'check' variable in a loop
in spa_prop_validate(). I ran into this in the clang380-import branch,
where clang 3.8.0 warns about it. (It is already fixed there.)
MFC after: 3 days
When a ZFS drive disappears, ZFS sends a resource.fs.zfs.removed event to
userland. A userland program like zfsd(8) can use that event, for example to
activate a hotspare. The current code contains a race condition: vdev_geom
will sent the sysevent _before_ spa.c would update the vdev's status,
causing userland processes to see pool state that does not reflect the
device removal. This change moves the sysevent to spa.c, closing the race.
Reviewed by: delphij, Sean Eric Fagan
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4902
After r292066, vdev_geom verifies both the vdev and pool guids of device
labels during open. However, spare and l2arc devices don't have pool guids,
so opening them by guid will fail (opening by path, when the pathname is
known, still succeeds). This change allows a vdev to be opened by guid if
the label contains no pool_guid, which is the case for inactive spares and
l2arc devices.
PR: 292066
Reported by: delphij
Reviewed by: delphij, smh
MFC after: 2 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4861
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
If available, record the physical path of a vdev in ZFS meta-data.
Do this both when opening the vdev, and when receiving an attribute
change notification from GEOM.
Make vdev_geom_close() synchronous instead of deferring its work to
a GEOM event handler. There is no benefit to deferring the work and
this prevents a future open call from referencing a consumer that is
scheduled for destruction. The close followed by an immediate open
will occur during a vdev reprobe triggered by any type of I/O error.
Consolidate vdev_geom_close() and vdev_geom_detach() into
vdev_geom_close() and vdev_geom_close_locked(). This also moves the
cross linking operations between vdev and GEOM consumer into a
single place (linking in vdev_geom_attach() and unlinking in
vdev_geom_close_locked()).
Submitted by: gibbs, asomers
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4524
Fix const conversion warning in lz4_decompress which shows when warnings
are enabled (to be done later).
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
cperciva's libmd implementation is 5-30% faster
The same was done for SHA256 previously in r263218
cperciva's implementation was lacking SHA-384 which I implemented, validated against OpenSSL and the NIST documentation
Extend sbin/md5 to create sha384(1)
Chase dependancies on sys/crypto/sha2/sha2.{c,h} and replace them with sha512{c.c,.h}
Reviewed by: cperciva, des, delphij
Approved by: secteam, bapt (mentor)
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3929
first instruction to see if it's either a pushm with lr, or a sub with sp.
The former is the common case, with the latter used with va_args.
This removes 12 probes. These are all hand-written assembly, with a few C
functions with no stack usage.
Submitted by: Howard Su <howard0su@gmail.com>
Differential Revision: https://reviews.freebsd.org/D4419
Rather than pushing all eight possible arguments into dtrace_probe()'s
stack frame, make the syscall_args struct for the current syscall available
via the current thread. Using a custom getargval method for the systrace
provider, this allows any syscall argument to be fetched, even in kernels
that have modified the maximum number of system call arguments.
Sponsored by: EMC / Isilon Storage Division
With the new VOP_GETPAGES() KPI the "count" argument counts pages already,
and doesn't need to be translated from bytes to pages.
While here make it consistent that *rbehind and *rahead are updated only
if we doesn't return error.
Pointy hat to: glebius
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
except during split, add, or create operations. This fixes a bug where the
wrong disk could be returned, and higher layers of ZFS would immediately
eject it again.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
o When opening by GUID, require both the pool and vdev GUIDs to
match. While it is highly unlikely for two vdevs to have the same
vdev GUIDs, the ZFS storage pool allocator only guarantees they
are unique within a pool.
o Modify the open behavior to:
- If we are opening a vdev that hasn't previously been opened,
open by path without checking GUIDs.
- Otherwise, open by path and verify GUIDs.
- If that fails, search all geom providers for a device with
matching GUIDs.
- If that fails, return ENOENT.
Submitted by: gibbs, asomers
Reviewed by: smh
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4486
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
These helper functions can be used to read in or write a buffer from or to
an arbitrary process' address space. Without them, this can only be done
using proc_rwmem(), which requires the caller to fill out a uio. This is
onerous and results in code duplication; the new functions provide a simpler
interface which is sufficient for most existing callers of proc_rwmem().
This change also adds a manual page for proc_rwmem() and the new functions.
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D4245
While here update for armv6 to a tested value.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: stat
Differential Revision: https://reviews.freebsd.org/D4315
Boundary Trace to assembly to reduce the overhead of these checks.
Submitted by: Howard Su <howard0su@gmail.com>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4266
tunable via sysctl or kernel tunables.
Illumos allows this parameters to be changed via the fasttrap.conf configuration
file, but FreeBSD code hardcoded the parameters. Expose them under
the kern.dtrace.fasttrap sysctl tree.
MFC after: 2 weeks
stack, take into account the copy of rsi pushed between the breakpoint
trapframe and the dtrace_invop frame. Prior to r287644, this was covered
by the fact that sizeof(struct amd64_frame) was 24 rather than 16.
Reported by: smh
As reported by Coverity a null pointer de-reference panic would be triggered
when zfs_recover was set so switch to straight panic as it can never be
recovered.
Reported by: Coverity Scan
MFC after: 1
X-MFC-With: r290401
Sponsored by: Multiplay
wrong value in the comparison, leading to incorrectly setting the new
value.
This has been observed in the ZFS code. Without this we can lose track of
the reference count in a zrlock object.
We should move to use the generic atomic functions, however as this has
been observed I would prefer to have this working, then move to the generic
functions.
PR: 204037
Sponsored by: ABT Systems Ltd
b_asize can be zero if the block is compressed into an empty block
(ZIO_COMPRESS_EMPTY) and the trim code asserts that meaningless
zero-sized trimming is not attempted.
The logic for calling trim_map_free() is extracted into a new function
l2arc_trim() to minimize code duplication.
PR: 203473
Reported by: Willem Jan Withagen <wjw@digiware.nl>
Tested by: Willem Jan Withagen <wjw@digiware.nl>
MFC after: 11 days
linux_syscallnames[] from linux_* to linux32_* to avoid conflicts with
linux64.ko. While here, add support for linux64 binaries to systrace.
- Update NOPROTO entries in amd64/linux/syscalls.master to match the
main table to fix systrace build.
- Add a special case for union l_semun arguments to the systrace
generation.
- The systrace_linux32 module now only builds the systrace_linux32.ko.
module on amd64.
- Add a new systrace_linux module that builds on both i386 and amd64.
For i386 it builds the existing systrace_linux.ko. For amd64 it
builds a systrace_linux.ko for 64-bit binaries.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D3954
5561 support root pools on EFI/GPT partitioned disks
5125 update zpool/libzfs to manage bootable whole disk pools (EFI/GPT labeled disks)
Reviewed by: Jean McCormack <jean.mccormack@nexenta.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
illumos/illumos-gate@1a902ef862
This is NOP changes for FreeBSD.
