This fixes creation of zvol devices for snapshots during zfs receive,
that previously failed with "ZFS WARNING: Unable to create ZVOL" message.
This solution is not perfect, but IMHO better then it was before.
MFC after: 2 weeks
If device has stripe size bigger then maximal sector size supported by
ZFS, there is nothing can be done to avoid read-modify-write cycles.
Taking that stripe size into account will only reduce space efficiency
and pointlessly bother user with warnings that can not be fixed.
Discussed with: smh
Use of misaligned or non-power-of-2 stripes is not really useful for ZFS,
since increased ashift won't help to avoid read-modify-write cycles, and
only reduce pool space efficiency and compression rates.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Stefan Ring <stefanrin@gmail.com>
Reviewed by: Steven Burgess <sburgess@datto.com>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
In certain circumstances, "zfs send -i" (incremental send) can produce a
stream which will result in incorrect sparse file contents on the
target.
The problem manifests as regions of the received file that should be
sparse (and read a zero-filled) actually contain data from a file that
was deleted (and which happened to share this file's object ID).
Note: this can happen only with filesystems (not zvols, because they do
not free (and thus can not reuse) object IDs).
Note: This can happen only if, since the incremental source (FromSnap),
a file was deleted and then another file was created, and the new file
is sparse (i.e. has areas that were never written to and should be
implicitly zero-filled).
We suspect that this was introduced by 4370 (applies only if hole_birth
feature is enabled), and made worse by 5243 (applies if hole_birth
feature is disabled, and we never send any holes).
The bug is caused by the hole birth feature. When an object is deleted
and replaced, all the holes in the object have birth time zero. However,
zfs send cannot tell that the holes are new since the file was replaced,
so it doesn't send them in an incremental. As a result, you can end up
with invalid data when you receive incremental send streams. As a
short-term fix, we can always send holes with birth time 0 (unless it's
a zvol or a dataset where we can guarantee that no objects have been
reused).
Closes#37openzfs/openzfs@adef853162
6672 arc_reclaim_thread() should use gethrtime() instead of ddi_get_lbolt()
6673 want a macro to convert seconds to nanoseconds and vice-versa
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Eli Rosenthal <eli.rosenthal@delphix.com>
illumos/illumos-gate@a8f6344fa0
in the dedup property value
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: ilovezfs <ilovezfs@icloud.com>
illumos/illumos-gate@971640e6aa
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5f7a8e6d75
after the scrub started
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@38d6103674
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Gary Mills <gary_mills@fastmail.fm>
illumos/illumos-gate@8c04a1fa3f
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@97e8130957
- Handle the case where no DOF helper is provided. This occurs with the
currently-unused DTRACEHIOC_ADD ioctl.
- Fix some checks that prevented the loading DOF in the (non-default)
lazyload mode.
Upstream, tracepoints are protected by per-CPU mutexes. An unlinked
tracepoint may be freed once all the tracepoint mutexes have been acquired
and released - this is done in fasttrap_mod_barrier(). This mechanism was
not properly ported: in some places, the proc lock is used in place of a
tracepoint lock, and in others the locking is omitted entirely. This change
implements tracepoint locking with an rmlock, where the read lock is used
in fasttrap probe context. As a side effect, this fixes a recursion on the
proc lock when the raise action is used from a userland probe.
MFC after: 1 month
need to include it explicitly when <vm/vm_param.h> is already included.
Suggested by: alc
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D5379
for all struct bio you get back from g_{new,alloc}_bio. Temporary
bios that you create on the stack or elsewhere should use this before
first use of the bio, and between uses of the bio. At the moment, it
is nothing more than a wrapper around bzero, but that may change in
the future. The wrapper also removes one place where we encode the
size of struct bio in the KBI.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Andriy Gapon <avg@icyb.net.ua>
illumos/illumos-gate@e7e978b1f7
During the update process in sa_modify_attrs(), the sizes of existing
variably-sized SA entries are obtained from sa_lengths[]. The case where
a variably-sized SA was being replaced neglected to increment the index
into sa_lengths[], so subsequent variable-length SAs would be rewritten
with the wrong length. This patch adds the missing increment operation
so all variably-sized SA entries are stored with their correct lengths.
Another problem was that index into attr_desc[] was increased even when
an attribute was removed. If that attribute was not the last attribute,
then the last attribute was lost.
Change 294329 removed the ability to build ZFS pools that are backed by
zvols, because having that ability (even if it's not used) leads to
deadlocks. By popular demand, I'm adding an off-by-default sysctl to
reenable that ability.
Reviewed by: lidl, delphij
MFC after: Never
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4998
This is the final step required allowing to compile and to run RISC-V
kernel and userland from HEAD.
RISC-V is a completely open ISA that is freely available to academia
and industry.
Thanks to all the people involved! Special thanks to Andrew Turner,
David Chisnall, Ed Maste, Konstantin Belousov, John Baldwin and
Arun Thomas for their help.
Thanks to Robert Watson for organizing this project.
This project sponsored by UK Higher Education Innovation Fund (HEIF5) and
DARPA CTSRD project at the University of Cambridge Computer Laboratory.
FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv
Reviewed by: andrew, emaste, kib
Relnotes: Yes
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4982
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Steven Hartland <steven.hartland@multiplay.co.uk>
illumos/illumos-gate@2bad22584d
exceeds refquota
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5878fad70d
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@68ecb2ec93
This allows to do a full (non-incremental send) and receive it as a clone
of an existing dataset. It can leverage nopwrite to share blocks with the
origin. This can be used to change the relationship of datasets on the
target. For example, maybe on the source you have:
A ---- B ---- C
And you have sent to the target a full of B, and the incremental B->C:
B ---- C
You later realize that you want to have A on the target. You will have to
do a full send of A, but nopwrite can save you space on the target if you
receive it as a clone of B, assuming that A and B have some blocks inxi
common:
B ---- C
\
A
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: James Pan <jiaming.pan@yahoo.com>
illumos/illumos-gate@3502ed6e7c
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Will Andrews <will@firepipe.net>
illumos/illumos-gate@eb5bb58421
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@c71c00bbe8
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@5bdd995ddb
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Simon Klinkert <simon.klinkert@gmail.com>
illumos/illumos-gate@6575bca013
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Andriy Gapon <avg@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Richard Yao <ryao@gentoo.org>
illumos/illumos-gate@eaef6a96de
6292 exporting a pool while an async destroy is running can leave entries
in the deferred tree
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Fabian Keil <fk@fabiankeil.de>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
illumos/illumos-gate@a443cc80c7
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@b39b744be7
This is revert of 5693.
called from zfs_write() - one of them, through dmu_write(), was handled
correctly; the other wasn't.
Reviewed by: avg@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4923
The return value doesn't need to be checked, because nvlist_get_guid's
callers check the returned values of the guids.
Coverity CID: 1341869
MFC after: 1 week
X-MFC-With: 292066
Sponsored by: Spectra Logic Corp
Using zvols as backing devices for ZFS pools is fraught with panics and
deadlocks. For example, attempting to online a missing device in the
presence of a zvol can cause a panic when vdev_geom tastes the zvol. Better
to completely disable vdev_geom from ever opening a zvol. The solution
relies on setting a thread-local variable during vdev_geom_open, and
returning EOPNOTSUPP during zvol_open if that thread-local variable is set.
Remove the check for MUTEX_HELD(&zfsdev_state_lock) in zvol_open. Its intent
was to prevent a recursive mutex acquisition panic. However, the new check
for the thread-local variable also fixes that problem.
Also, fix a panic in vdev_geom_taste_orphan. For an unknown reason, this
function was set to panic. But it can occur that a device disappears during
tasting, and it causes no problems to ignore this departure.
Reviewed by: delphij
MFC after: 1 week
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4986
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gwr@nexenta.com>
illumos/illumos-gate@2bd7a8d078
This fixes erroneous double increments of the 'check' variable in a loop
in spa_prop_validate(). I ran into this in the clang380-import branch,
where clang 3.8.0 warns about it. (It is already fixed there.)
MFC after: 3 days
When a ZFS drive disappears, ZFS sends a resource.fs.zfs.removed event to
userland. A userland program like zfsd(8) can use that event, for example to
activate a hotspare. The current code contains a race condition: vdev_geom
will sent the sysevent _before_ spa.c would update the vdev's status,
causing userland processes to see pool state that does not reflect the
device removal. This change moves the sysevent to spa.c, closing the race.
Reviewed by: delphij, Sean Eric Fagan
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4902
After r292066, vdev_geom verifies both the vdev and pool guids of device
labels during open. However, spare and l2arc devices don't have pool guids,
so opening them by guid will fail (opening by path, when the pathname is
known, still succeeds). This change allows a vdev to be opened by guid if
the label contains no pool_guid, which is the case for inactive spares and
l2arc devices.
PR: 292066
Reported by: delphij
Reviewed by: delphij, smh
MFC after: 2 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4861
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
If available, record the physical path of a vdev in ZFS meta-data.
Do this both when opening the vdev, and when receiving an attribute
change notification from GEOM.
Make vdev_geom_close() synchronous instead of deferring its work to
a GEOM event handler. There is no benefit to deferring the work and
this prevents a future open call from referencing a consumer that is
scheduled for destruction. The close followed by an immediate open
will occur during a vdev reprobe triggered by any type of I/O error.
Consolidate vdev_geom_close() and vdev_geom_detach() into
vdev_geom_close() and vdev_geom_close_locked(). This also moves the
cross linking operations between vdev and GEOM consumer into a
single place (linking in vdev_geom_attach() and unlinking in
vdev_geom_close_locked()).
Submitted by: gibbs, asomers
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4524
Fix const conversion warning in lz4_decompress which shows when warnings
are enabled (to be done later).
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
cperciva's libmd implementation is 5-30% faster
The same was done for SHA256 previously in r263218
cperciva's implementation was lacking SHA-384 which I implemented, validated against OpenSSL and the NIST documentation
Extend sbin/md5 to create sha384(1)
Chase dependancies on sys/crypto/sha2/sha2.{c,h} and replace them with sha512{c.c,.h}
Reviewed by: cperciva, des, delphij
Approved by: secteam, bapt (mentor)
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3929
first instruction to see if it's either a pushm with lr, or a sub with sp.
The former is the common case, with the latter used with va_args.
This removes 12 probes. These are all hand-written assembly, with a few C
functions with no stack usage.
Submitted by: Howard Su <howard0su@gmail.com>
Differential Revision: https://reviews.freebsd.org/D4419
Rather than pushing all eight possible arguments into dtrace_probe()'s
stack frame, make the syscall_args struct for the current syscall available
via the current thread. Using a custom getargval method for the systrace
provider, this allows any syscall argument to be fetched, even in kernels
that have modified the maximum number of system call arguments.
Sponsored by: EMC / Isilon Storage Division
With the new VOP_GETPAGES() KPI the "count" argument counts pages already,
and doesn't need to be translated from bytes to pages.
While here make it consistent that *rbehind and *rahead are updated only
if we doesn't return error.
Pointy hat to: glebius
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
except during split, add, or create operations. This fixes a bug where the
wrong disk could be returned, and higher layers of ZFS would immediately
eject it again.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
o When opening by GUID, require both the pool and vdev GUIDs to
match. While it is highly unlikely for two vdevs to have the same
vdev GUIDs, the ZFS storage pool allocator only guarantees they
are unique within a pool.
o Modify the open behavior to:
- If we are opening a vdev that hasn't previously been opened,
open by path without checking GUIDs.
- Otherwise, open by path and verify GUIDs.
- If that fails, search all geom providers for a device with
matching GUIDs.
- If that fails, return ENOENT.
Submitted by: gibbs, asomers
Reviewed by: smh
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4486
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
These helper functions can be used to read in or write a buffer from or to
an arbitrary process' address space. Without them, this can only be done
using proc_rwmem(), which requires the caller to fill out a uio. This is
onerous and results in code duplication; the new functions provide a simpler
interface which is sufficient for most existing callers of proc_rwmem().
This change also adds a manual page for proc_rwmem() and the new functions.
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D4245
While here update for armv6 to a tested value.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: stat
Differential Revision: https://reviews.freebsd.org/D4315
Boundary Trace to assembly to reduce the overhead of these checks.
Submitted by: Howard Su <howard0su@gmail.com>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4266
tunable via sysctl or kernel tunables.
Illumos allows this parameters to be changed via the fasttrap.conf configuration
file, but FreeBSD code hardcoded the parameters. Expose them under
the kern.dtrace.fasttrap sysctl tree.
MFC after: 2 weeks
stack, take into account the copy of rsi pushed between the breakpoint
trapframe and the dtrace_invop frame. Prior to r287644, this was covered
by the fact that sizeof(struct amd64_frame) was 24 rather than 16.
Reported by: smh
As reported by Coverity a null pointer de-reference panic would be triggered
when zfs_recover was set so switch to straight panic as it can never be
recovered.
Reported by: Coverity Scan
MFC after: 1
X-MFC-With: r290401
Sponsored by: Multiplay
wrong value in the comparison, leading to incorrectly setting the new
value.
This has been observed in the ZFS code. Without this we can lose track of
the reference count in a zrlock object.
We should move to use the generic atomic functions, however as this has
been observed I would prefer to have this working, then move to the generic
functions.
PR: 204037
Sponsored by: ABT Systems Ltd
b_asize can be zero if the block is compressed into an empty block
(ZIO_COMPRESS_EMPTY) and the trim code asserts that meaningless
zero-sized trimming is not attempted.
The logic for calling trim_map_free() is extracted into a new function
l2arc_trim() to minimize code duplication.
PR: 203473
Reported by: Willem Jan Withagen <wjw@digiware.nl>
Tested by: Willem Jan Withagen <wjw@digiware.nl>
MFC after: 11 days
linux_syscallnames[] from linux_* to linux32_* to avoid conflicts with
linux64.ko. While here, add support for linux64 binaries to systrace.
- Update NOPROTO entries in amd64/linux/syscalls.master to match the
main table to fix systrace build.
- Add a special case for union l_semun arguments to the systrace
generation.
- The systrace_linux32 module now only builds the systrace_linux32.ko.
module on amd64.
- Add a new systrace_linux module that builds on both i386 and amd64.
For i386 it builds the existing systrace_linux.ko. For amd64 it
builds a systrace_linux.ko for 64-bit binaries.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D3954
5561 support root pools on EFI/GPT partitioned disks
5125 update zpool/libzfs to manage bootable whole disk pools (EFI/GPT labeled disks)
Reviewed by: Jean McCormack <jean.mccormack@nexenta.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
illumos/illumos-gate@1a902ef862
This is NOP changes for FreeBSD.
4185 add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@45818ee124
This is only a partial merge of respective ZFS infrastructure changes.
At this moment FreeBSD kernel has no those crypto algorithms, so the
parts of the code to enable them are commented out. When they are
implemented, it will be trivial to plug them in.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9c3fd1216f
For more info, see:
- slides http://www.slideshare.net/MatthewAhrens/openzfs-send-and-receive
- video https://www.youtube.com/watch?v=iY44jPMvxog
- manpage changes (for zfs resume -s and zfs send -t)
- upcoming talk at the OpenZFS Developer Summit
The TL;DR is:
Use "zfs receive -s" to save the partially received state on failure.
On failure, get the receive token with "zfs get receive_resume_token <fs>"
Resume the send with "zfs send -t <token_value>"
Relnotes: yes
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Xin LI <delphij@freebsd.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Justin T. Gibbs <gibbs@FreeBSD.org>
illumos/illumos-gate@d2058105c6
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@8fe00bfb87
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@6de9bb5603
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@0f2e7d03b8
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Alexander Motin <mav@freebsd.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@632802744e
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Albert Lee <trisk@omniti.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@139510fb6e
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Albert Lee <trisk@omniti.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@b10bba7246
Before r278702 prefetch was blocked for I/Os > 1MB, after -- >= 1MB.
1MB I/Os are used for bulk operations in CTL (XCOPY, VERIFY), and disabling
prefetch for them reduced the performance.
This is temporary local patch, that should be replaced when upstreamed.
Discussed with: mahrens
MFC after: 3 days
otherwise DTRACE_ANCHORED() returns false and that makes stack()
insert a bogus frame at the top.
For example:
dtrace -n 'test:dtrace_test::sdttest { stack(); }
This change is not really a solution, but just a work-around.
The real solution is to record the probe's call site and to use
that for resolving a function name.
PR: 195222
MFC after: 22 days
A change to a property on a dataset must be propagated to its descendants
in case that property is inherited. For datasets whose information is
not currently loaded into memory (e.g. a snapshot that isn't currently
mounted), there is nothing to do; the property change will take effect
the next time that dataset is loaded. To handle updates to datasets that
are in-core, ZFS registers a callback entry for each property of each
loaded dataset with the dsl directory that holds that dataset. There
is a dsl directory associated with each live dataset that references
both the live dataset and any snapshots of the live dataset. A property
change is effected by doing a traversal of the tree of dsl directories
for a pool, starting at the directory sourcing the change, and invoking
these callbacks.
The current implementation both registers and de-registers properties
individually for each loaded dataset. While registration for a property is
O(1) (insert into a list), de-registration is O(n) (search list and then
remove). The 'n' for de-registration, however, is not limited to the size
(number of snapshots + 1) of the dsl directory. The eviction portion
of the life cycle for the in core state of datasets is asynchronous,
which allows multiple copies of the dataset information to be in-core
at once. Only one of these copies is active at any time with the rest
going through tear down processing, but all copies contribute to the
cost of performing a dsl_prop_unregister().
One way to create multiple, in-flight copies of dataset information
is by performing "zfs list" operations from multiple threads
concurrently. In-core dataset information is loaded on demand and then
evicted when reference counts drops to zero. For datasets that are not
mounted, there is no persistent reference count to keep them resident.
So, a list operation will load them, compute the information required to
do the list operation, and then evict them. When performing this operation
from multiple threads it is possible that some of the in-core dataset
information will be reused, but also possible to lose the race and load
the dataset again, even while the same information is being torn down.
Compounding the performance issue further is a change made for illumos
issue 5056 which made dataset eviction single threaded. In environments
using automation to manage ZFS datasets, it is now possible to create
enough of a backlog of dataset evictions to consume excessive amounts
of kernel memory and to bog down the system.
The fix employed here is to make property de-registration O(1). With this
change in place, it is hoped that a single thread is more than sufficient
to handle eviction processing. If it isn't, the problem can be solved
by increasing the number of threads devoted to the eviction taskq.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_prop.h:
Associate dsl property callback records with both the
dsl directory and the dsl dataset that is registering the
callback. Both connections are protected by the dsl directory's
"dd_lock".
When linking callbacks into a dsl directory, group them by
the property type. This helps reduce the space penalty for the
double association (the property name pointer is stored once
per dsl_dir instead of in each record) and reduces the number of
strcmp() calls required to do callback processing when updating
a single property. Property types are stored in a linked list
since currently ZFS registers a maximum of 10 property types
for each dataset.
Note that the property buckets/records associated with a dsl
directory are created on demand, but only freed when the dsl
directory is freed. Given the static nature of property types
and their small number, there is no benefit to freeing the few
bytes of memory used to represent the property record earlier.
When a property record becomes empty, the dsl directory is either
going to become unreferenced a little later in this thread of
execution, or there is a high chance that another dataset is
going to be loaded that would recreate the bucket anyway.
Replace dsl_prop_unregister() with dsl_prop_unregister_all().
All callers of dsl_prop_unregister() are trying to remove
all property registrations for a given dsl dataset anyway. By
changing the API, we can avoid doing any lookups of callbacks
by property type and just traverse the list of all callbacks
for the dataset and free each one.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c:
Replace use of dsl_prop_unregister() with the new
dsl_prop_unregister_all() API.
illumos/illumos-gate@03bad06fbb
Author: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Illumos issue:
6171 dsl_prop_unregister() slows down dataset eviction
https://www.illumos.org/issues/6171
MFC after: 2 weeks
c546f36aa8https://www.illumos.org/issues/6220
5408 introduced a memleak in l2arc, namely the member b_thawed gets leaked when
an arc_hdr is realloced from full to l2only.
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Arne Jansen <sensille@gmx.net>
updated
ZFS already supports storing the vdev FRU in a vdev property. There
is code in libzfs to work with this property, and there is code in
the zfs-retire FMA module that looks for that information. But there
is no code actually setting or updating the FRU.
To address this, ZFS is changed to send a handful of new events
whenever a vdev is added, attached, cleared, or onlined, as well
as when a pool is created or imported.
Note that syseventd is not currently available on FreeBSD and thus
some work is needed to actually support the new ZFS events (e.g. in
zfsd) to actually use this capability, this changeset is mostly a
diff reduction from upstream.
illumos/illumos-gate@1437283407
Illumos issues:
5997 FRU field not set during pool creation and never updated
https://www.illumos.org/issues/5997
In r286570 (MFV of r277426) an unprotected write to b_flags to
set the compression mode was introduced. This would open a race
window where data is partially decompressed, modified, checksummed
and written to the pool, resulting in pool corruption due to the
partial decompression.
Prevent this by reintroducing b_compress
illumos/illumos-gate@d4cd038c92
Illumos issues:
6214 zpools going south
https://www.illumos.org/issues/6214
Rewrite the ZFS prefetch code to detect only forward, sequential
streams.
The following kstats have been added:
kstat.zfs.misc.arcstats.sync_wait_for_async
How many sync reads have waited for async read
to complete. (less is better)
kstat.zfs.misc.arcstats.demand_hit_predictive_prefetch
How many demand read didn't have to wait for I/O
because of predictive prefetch. (more is better)
zfetch kstats have been similified to hits, misses, and max_streams,
with max_streams representing times when we were not able to create
new stream because we already have the maximum number of sequences
for a file.
The sysctl variable/loader tunable vfs.zfs.zfetch.block_cap have been
replaced by vfs.zfs.zfetch.max_distance, which controls maximum bytes
to prefetch per stream.
illumos/illumos-gate@cf6106c8a0
Illumos ZFS issues:
5987 zfs prefetch code needs work
https://www.illumos.org/issues/5987
since on amd64 the first argument to a function is generally not on the
stack.
Revert an old DTrace bug fix to some code that assumed that
sizeof(struct amd64_frame) == 16.
Reviewed by: jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3255
5930 fasttrap_pid_enable() panics when prfind() fails in forking process
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Gordon Ross <gordon.ross@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Bryan Cantrill <bryan@joyent.com>
illumos/illumos-gate@9df7e4e12e
This makes it possible to analyze the performance of the new ZFS
write throttle with dtrace
PR: 200316
Submitted by: Lacey Powers <lacey.leanne@gmail.com>
Reviewed by: avg, smh, delphij (no objection)
Approved by: bapt (mentor)
MFC after: 1 month
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3472
r286951 by reinstating changes in r274628.
In l2arc_compress_buf(), we allocate a buffer to stash away the compressed
data in 'cdata', allocated of l2hdr->b_asize bytes.
We then ask zio_compress_data() to compress the buffer, b_l1hdr.b_tmp_cdata,
which is of l2hdr->b_asize bytes, and have the compressed size (or original
size, if compress didn't gain enough) stored in csize.
To pad the buffer to fit the optimal write size, we round up the compressed
size to L2 device's vdev_ashift.
Illumos code rounds up the size by at most SPA_MINBLOCKSIZE. Because we
know csize <= b_asize, and b_asize is integer multiple of SPA_MINBLOCKSIZE,
we are guaranteed that the rounded up csize would be <= b_asize. However,
this is not necessarily true when we round up to 1 << vdev_ashift, because
it could be larger than SPA_MINBLOCKSIZE.
So, in the worst case scenario, we are overwriting at most
(1 << vdev_ashift - SPA_MINBLOCKSIZE)
bytes of memory next to the compressed data buffer.
Andriy's original change in r274628 reorganized the code a little bit,
by moving the padding to after we determined that the compression was
beneficial. At which point, we would check rounded size against the
allocated buffer size, and the buffer overrun would not be possible.
as parent. In the case of a send or receive, the curproc would be the
userland application that issues the ioctl. This would trigger an assertion
failure introduced in Solaris compatibility shims in r196458 when kernel is
compiled with INVARIANTS.
Fix this by using p0 (proc0 or kernel) as the parent thread when creating
the kernel threads.
FreeBSD porting notes:
- only kernel-side changes are merged
- the new ioctl is not actually implemented yet
- thus, the goal is to synchronize DMU code
illumos/illumos-gate@2bcf0248e9https://www.illumos.org/issues/5692
we would like to expose the number of hole (sparse) blocks in a file.
this can be useful to for example if you want to fill in the holes with
some data; knowing the number of holes in advances allows you to report
progress on hole filling. We could use SEEK_HOLE to do that but it would
be O(n) where n is the number of holes present in the file.
Author: Max Grossman <max.grossman@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
The change that introduced the L2ARC compression support also introduced
a bug where the on-disk size of the selected buffers could end up larger
than the target size if the ashift is greater than 9. This was because
the buffer selection could did not take into account the fact that
on-disk size could be larger than the in-memory buffer size due to
the alignment requirements.
At the moment b_asize is a misnomer as it does not always represent the
allocated size: if a buffer is compressed, then the compressed size is
properly rounded (on FreeBSD), but if the compression fails or it is not
applied, then the original size is kept and it could be smaller than what
ashift requires.
For the same reasons arcstat_l2_asize and the reported used space
on the cache device could be smaller than the actual allocated size
if ashift > 9. That problem is not fixed by this change.
This change only ensures that l2ad_hand is not advanced by more
than target_sz. Otherwise we would overwrite active (unevicted)
L2ARC buffers. That problem is manifested as growing l2_cksum_bad
and l2_io_error counters.
This change also changes 'p' prefix to 'a' prefix in a few places
where variables represent allocated rather than physical size.
The resolved problem could also result in the reported allocated size
being greater than the cache device's capacity, because of the
overwritten buffers (more than one buffer claiming the same disk
space).
This change is already in ZFS-on-Linux:
zfsonlinux/zfs@ef56b0780c
PR: 198242
PR: 195746 (possibly related)
Reviewed by: mahrens (https://reviews.csiden.org/r/229/)
Tested by: gkontos@aicom.gr (most recently)
MFC after: 15 days
X-MFC note: patch does not apply as is at the moment
Relnotes: yes
Sponsored by: ClusterHQ
Differential Revision: https://reviews.freebsd.org/D2764
Reviewed by: noone (@FreeBSD.org)
The lock order reversal and a resulting deadlock were introduced
in r285021 / D2865. The problem is that zfs_register_callbacks() calls
dsl_prop_get_integer() that has to acquire spa_namespace_lock.
At the same time, spa_config_sync() is called with spa_namespace_lock
held and then it performs ZFS vnode operations that acquire
z_teardown_lock in the reader mode.
So, fix the problem by using dsl_prop_get_int_ds() instead of
dsl_prop_get_integer(). The former does not need to look up
the pool and the dataset by name.
Reported by: many
Reviewed by: delphij
Tested by: delphij, Jens Schweikhardt <schweikh@schweikhardt.net>
MFC after: 5 days
X-MFC with: r285021
- Add
nvlist_{add,get,take,move,exists,free}_{number,bool,string,nvlist,
descriptor} functions.
- Add support for (un)packing arrays.
- Add the nvl_array_next field to the nvlist structure.
If an array is added by the nvlist_{move,add}_nvlist_array function
this field will contains next element in the array.
- Add the nitems field to the nvpair and nvpair_header structure.
This field contains number of elements in the array.
- Add special flag (NV_FLAG_IN_ARRAY) which is set if nvlist is a part of
an array.
- Add special type (NV_TYPE_NVLIST_ARRAY_NEXT).This type is used only
on packing/unpacking.
- Add new API for traversing arrays (nvlist_get_array_next).
- Add the nvlist_get_pararr function which combines the
nvlist_get_array_next and nvlist_get_parent functions. If nvlist is in
the array it will return next element from array. If nvlist is last
element in array or it isn't in array it will return his
container (parent). This function should simplify traveling over nvlist.
- Add tests for new features.
- Add documentation for new functions.
- Add my copyright.
- Regenerate the sys/cddl/compat/opensolaris/sys/nvpair.h file.
PR: 191083
Reviewed by: allanjude (doc)
Approved by: pjd (mentor)
Reviewed by: Jason King <jason.brian.king@gmail.com>
Reviewed by: Josef Sipek <jeffpc@josefsipek.net>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Bart Coddens <bart.coddens@gmail.com>
illumos/illumos-gate@fc98fea58e
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@2fd872a734
As a way to make it more difficult to introduce bugs into the ARC, and to
make it easier to diagnose issues when bugs do creep in, it would be
beneficial to change the type of the arc_state_t's arcs_size field to be
a refcount_t instead of a uint64_t. This would allow us to make stricter
checks when incrementing and decrementing the value with debugging enabled,
but still fallback to simple, fast atomic operations when debugging is
disabled.
when adjusting MFU size.
illumos/illumos-gate@31c46cf23chttps://www.illumos.org/issues/6033
When we're looking for the list containing oldest buffer we never
actually look at the MFU lists even when we try to evict from MFU.
looks like a copy paste error, the fix is here:
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Xin Li <delphij@delphij.net>
Reviewed by: Prakash Surya <me@prakashsurya.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Alek Pinchuk <alek@nexenta.com>
Obtained from: illumos
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@244781f10d
This patch attempts to reduce lock contention on the current arc_state_t
mutexes. These mutexes are used liberally to protect the number of LRU
lists within the ARC (e.g. ARC_mru, ARC_mfu, etc). The granularity at
which these locks are acquired has been shown to greatly affect the
performance of highly concurrent, cached workloads.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
illumos/illumos-gate@8f5190a540
6093 zfsctl_shares_lookup should only VN_RELE() on zfs_zget() success
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@0f92170f1e
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@ca0cc3918a
A ZFS feature flags (large blocks) tracks its refcounts as the number of
datasets that have ever used the feature. Several features of this type
are planned to be added (new checksum functions). This code should be made
common infrastructure rather than duplicating the code for each feature.
5925 zfs receive -o origin=
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Author: Paul Dagnelie <pcd@delphix.com>
While running 'zfs recv' we noticed that every 128th 8K block required a
read. We were seeing that restore_write() was calling dmu_tx_hold_write()
and the indirect block was not cached. We should prefetch upcoming indirect
blocks to avoid having to go to disk and blocking the restore_write().
Allow an incremental send stream to be received as a clone, even if the
stream does not mark it as a clone.
illumos/illumos-gate@1d3f896f54https://www.illumos.org/issues/5981
When dmu_objset_find_dp gets called with a read lock held, it fans out
the work to the task queue. Each task in turn acquires its own read
lock before calling the callback. If during this process anyone tries
to a acquire a write lock, it will stall all read lock requests.Thus
the tasks will never finish, the read lock of the caller will never
get freed and the write lock never acquired. deadlock.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Arne Jansen <jansen@webgods.de>
illumos/illumos-gate@12380e1e70https://www.illumos.org/issues/5269
When importing a pool (at boot or with zpool import) with many
filesystem, the process can take minutes. It doesn't matter whether
the pool has been exported cleanly or uncleanly. The problem is that
each dataset has its own log chain. On import, all datasets have to be
checked if there are logs to replay. The idea is to speed up this
process by paralellizing it.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Arne Jansen <jansen@webgods.de>
lzc_send_space when source is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
Author: Max Grossman <max.grossman@delphix.com>
illumos/illumos-gate@643da460c8
illumos/illumos-gate@70163ac57ehttps://www.illumos.org/issues/5695
In dmu_sync_ready(), a hole block pointer will have it's logical size
explicitly set as it's necessary for replay purposes. To "undo" this,
dmu_sync_done() will zero out any hole that it finds. This becomes a
problem when using the "hole_birth" feature, as this will also wipe out
any birth time that might have happened to be set on the hole.
...
As a fix, the logic to zero out a hole is only applied to old style
holes with a birth time of zero. Holes created with the "hole_birth"
feature enabled will have a non-zero birth time, and will be skipped
(thus preserving the ltime, type, and level information as well).
In addition, zdb was updated to also print the ltime, type, and level
information for these new style holes. Previously, only the logical
birth time would be printed.
Author: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@2ec99e3e98
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@8df173054c
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@732885fca0
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@23367a2f2c
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matthew Ahrens <mahrens@delphix.com>
illumod/illumos-gate@34e8acef00
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@98110f08fa
Reviewed by: Will Andrews <willa@spectralogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Justin Gibbs <justing@spectralogic.com>
illumos/illumos-gate@bc9014e6a8
arc_state_t stats and differentiate between "data" and "metadata"
Reviewed by: Basil Crow <basil.crow@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <bayard.bell@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@4076b1bf41
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Chris Williamson <Chris.Williamson@delphix.com>
illumos/illumos-gate@89c86e3229
Currently, every buffer cached in the L2ARC is accompanied by a 240-byte
header in memory, leading to very high memory consumption when using very
large cache devices. These changes significantly reduce this overhead.
Currently:
L1-only header = 176 bytes
L1 + L2 or L2-only header = 176 bytes + 32 byte checksum + 32 byte l2hdr
= 240 bytes
Memory-optimized:
L1-only header = 176 bytes
L1 + L2 header = 176 bytes + 32 byte checksum = 208 bytes
L2-only header = 96 bytes + 32 byte checksum = 128 bytes
So overall:
Trunk Optimized
+-----------------+
L1-only | 176 B | 176 B | (same)
+-----------------+
L1 & L2 | 240 B | 208 B | (saved 32 bytes)
+-----------------+
L2-only | 240 B | 128 B | (saved 116 bytes)
+-----------------+
For an average blocksize of 8KB, this means that for the L2ARC, the ratio
of metadata to data has gone down from about 2.92% to 1.56%. For a
'storage optimized' EC2 instance with 1600GB of SSD and 60GB of RAM, this
means that we expect a completely full L2ARC to use (1600 GB * 0.0156) /
60GB = 41% of the available memory, down from 78%.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@34d7ce052c
5693 ztest fails in dbuf_verify: buf[i] == 0, due to dedup and bp_override
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@7f7ace3700
5661 ZFS: "compression = on" should use lz4 if feature is enabled
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Justin T. Gibbs <justing@spectralogic.com>
illumos/illumos-gate@db1741f555
5630 stale bonus buffer in recycled dnode_t leads to data corruption
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
illumos/illumos-gate@9d47dec048
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Justin T. Gibbs <justing@spectralogic.com>
illumos/illumos-gate@e57a022b8f
The check introduced by r285946 failed to add the dependency on
opt_kstack_pages.h which meant the default value for the platform instead
of the customised options KSTACK_PAGES=X was being tested.
Also wrap in #ifdef __FreeBSD__ for portability.
MFC after: 3 days
Sponsored by: Multiplay
When a process is exiting, there is a narrow window where p_cred may be
NULL while its threads are still executing. Specifically, the last thread
to exit a process sets the process state to PRS_ZOMBIE with the proc
spinlock held and then calls thread_exit(). thread_exit() drops the spin
lock, permitting the process to be reaped and thus causing its cred struct
to be released. However, the exiting thread may still cause DTrace probes
to fire by calling sched_throw(), resulting in a double fault if such a
probe enabling attempts to access the GID or UID DIF variables.
The thread's cred reference is not susceptible to this race since it is not
released until after the thread has exited.
MFC after: 1 week
As ZFS requires a more kernel stack pages than is the default on some
architectures e.g. i386, warn if KSTACK_PAGES is less than
ZFS_MIN_KSTACK_PAGES (which is 4 at the time of writing).
MFC after: 3 days
Sponsored by: Multiplay
This change refactors the existing create_thread() function to be more
generic. It replaces almost all of its arguments by a callback that can
be used to extract the thread ID and copy it out to the right place, but
also to perform additional initialization steps, such as setting the
trapframe. This also makes the difference between thr_new() and
thr_create() more clear in my opinion.
This function is going to be used by the CloudABI compatibility layer.
It looks like the OpenSolaris compatibility framework already provides a
function called thread_create(). Rename this function to
do_thread_create() and use a macro to deal with the namespacing
conflict. A similar approach is already used for thread_exit().
MFC after: 1 month
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support when it arrives.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2993
enabled. The cost of a timecounter read can be quite significant, and the
problem became more apparent after r284297, since that change resulted in
a call to lockstat_nsecs() for each acquisition of an rwlock read lock.
PR: 201642
Reviewed by: avg
Tested by: Jason Unovitch
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D3073
belongs to the kernel stack address range for the thread. Right now,
code checks that new frame is not farther then KSTACK_PAGES pages from
the current frame, which allows the address to point past the top of
the stack.
Reviewed by: andrew, emaste, markj
Differential revision: https://reviews.freebsd.org/D3108
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free
list) of either counter are still guarded with vnode interlock.
Reviewed by: kib (earlier version)
Tested by: pho
Previously several places were doing it on its own, partially
incorrectly (e.g. without the filedesc locked) or even actively harmful
by populating jdir or assigning rootvnode without vrefing it.
Reviewed by: kib
macros on amd64 and i386. Move the definition to machine/param.h.
kgdb defines INKERNEL() too, the conflict is resolved by renaming kgdb
version to PINKERNEL().
On i386, correct the lowest kernel address. After the shared page was
introduced, USRSTACK no longer points to the last user address + 1 [*]
Submitted by: Oliver Pinter [*]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
We now take z_teardown_lock as a writer to ensure that there is no I/O
while the filesystem state is in a flux. Also, zfs_suspend_fs() ->
zfsvfs_teardown() call zfs_unregister_callbacks() and zfs_resume_fs() ->
zfsvfs_setup() call zfs_unregister_callbacks(). Previously there was no
synchronization between those calls and the calls in the re-mounting
case. That could lead to concurrent execution and a crash.
PR: 180060
Differential Revision: https://reviews.freebsd.org/D2865
Suggested by: mahrens
Reviewed by: delphij, pho, mahrens, will
MFC after: 13 days
Sponsored by: ClusterHQ
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Alek Pinchuk <alek@nexenta.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@46e1baa6cfhttps://www.illumos.org/issues/5911
Sometimes ZFS appears to hang while deleting a file. It is actually
making slow progress at the file deletion, but other operations
(administrative and writes via the data path) "hang" until the file
removal completes, which can take a long time if the file has many
blocks. The deletion (or most of it) happens in a single txg, and the
sync thread spends most of its time reading indirect blocks via this
stack trace:
swtch+0x141()
cv_wait+0x70()
zio_wait+0x5b()
dbuf_read+0x2c0()
free_children+0x50()
free_children+0x12a()
free_children+0x12a()
free_children+0x12a()
dnode_sync_free_range_impl+0xdf()
dnode_sync_free_range+0x52()
range_tree_vacate+0x65()
dnode_sync+0x1d8()
dmu_objset_sync_dnodes+0x77()
dmu_objset_sync+0x19f()
dsl_dataset_sync+0x51()
dsl_pool_sync+0x9a()
spa_sync+0x2ff()
txg_sync_thread+0x21f()
thread_start+8()
One way to reproduce the problem is if we are over the arc_meta_limit,
e.g. because lots of indirect blocks are pinned because we have L0
dbufs under them. It could be that most of the L1 indirects are cached,
in which case when dmu_free_long_range_impl() calls dmu_tx_hold_free(),
it will complete very quickly. This allows dmu_free_long_range_impl() to
put many (perhaps all of its) transactions in the same TXG. However,
dmu_free_long_range_impl() calls dnode_evict_dbufs (and
dnode_free_range()), which removes the L0 dbufs, thus reducing the hold
count on the L1 indirect blocks above it, allowing them to be evicted.
Because we are over the arc_meta_limit(), these L1 blocks will be
evicted ASAP. Thus when we get to syncing context, the L1 indirects are
no longer cached and must be read in.
Obtained from: illumos
MFC after: 15 days
Do that only when when fast inline versions are available.
At the moment that can be the case only in the kernel and not for all
platforms.
The original code uses the binary search and that's kept as a fallback.
This is a micro optimization.
Differential Revision: https://reviews.freebsd.org/D2839
Reviewed by: delphij, mahrens, mav
MFC after: 17 days
o Provide an extensive set of assertions for input array of pages.
o Remove now duplicate assertions from different pagers.
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
The problem is that when inline versions of flsl and flsll are not
available, then libkern.h must be included for their declarations
in kernel sources.
The fix would be trivial, but I would like to figure out first if
it even makes sense to use the libkern provided implementations.
Reported by: bz
Pointyhat to: avg
b_size is a logical size of a buffer in memory, b_asize is its physical
size that accounts for possible compression.
Currently the latter is the best approximation for the allocated, on-disk
size.
L2ARC TRIM support was committed a few weeks before L2ARC compression
was imported, so originally the code was correct, because b_size was
the size.
Further thoughts. Given that the cache device is being overwritten
in a circular fashion it is not clear if a TRIM per each evicted L2ARC
buffer has any benefits.
Maybe it would be sufficient to issue a single trim request for the whole
device when it is loaded, e.g. after a bootup, or when it is unloaded, e.g.
before a shutdown. At least as long as L2ARC is not persistent across
reboots.
Discussed with: smh
MFC after: 19 says
This is a micro optimization.
The upstream code uses the binary search.
Differential Revision: https://reviews.freebsd.org/D2839
Reviewed by: delphij, mav
MFC after: 15 days
5946 zfs_ioc_space_snaps must check that firstsnap and lastsnap refer to snapshots
5945 zfs_ioc_send_space must ensure that fromsnap refers to a snapshot
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
illumos/illumos-gate@24218bebb4
Note that the upstream commit is modified during MFV: in the upstream
the check is done by inspecting ds_is_snapshot field while in FreeBSD
we call dsl_dataset_is_snapshot().
This is because illumos/illumos-gate@bc9014e6a8
(r277428 in vendor-sys/illumos) is not MFV-ed yet.
MFC after: 10 days
Currently there is no good reason to mangle the userland API.
The change was introduced in eac1d566b4,
r279437. Also see https://reviews.freebsd.org/D1881.
I am still convinced that nv should not have introduced intentionally
conflicting API.
Discussed with: rstone
X-MFC with: r279437
Sponsored by: ClusterHQ
Nothing stops a parallel unmount to suceed before the given call to
dounmount() checks and locks the covered vnode. Prevent dounmount()
from acting on the freed (although type-stable) memory by changing the
interface to require the mount point to be referenced. dounmount()
consumes the reference on return, regardless of the sucessfull or
erronous result.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- this should fail early unless the force flag is set
- if the force flag is set then any local modifications including
snapshots should be undone
See: https://www.illumos.org/issues/5912
See: https://reviews.csiden.org/r/220/
Reviewed by: mahrens, Paul Dagnelie <pcd@delphix.com>
MFC after: 15 days
Sponsored by: ClusterHQ
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
This allows to ensure that we do not write to a file that was opened
for reading only or vice versa.
Also, use the correct capability in in zfs_ioc_send_new().
Differential Revision: https://reviews.freebsd.org/D2382
Reviewed by: delphij
MFC after: 17 days
Sponsored by: ClusterHQ
At present zfs_domount() acquires a reference on the filesystem's root vnode
and that reference is kept until zfs_umount.
The latter calls vflush(rootrefs = 1) to dispose of the extra reference.
There is no explanation of why that reference is kept - what problem it
solves or what behavior it improves.
Also, that logic is FreeBSD specific.
There is one real problem with that reference, though.
zfs recv -F may receive a full, non-incremental stream to a mounted filesystem.
In that case the received root object is likely to have a different z_gen
attribute value. Because of that, zfs_rezget will leave the previous root znode
and vnode disassociated from the actual object (z_sa_hdl == NULL).
Thus, future calls to VFS_ROOT() -> zfs_root() will produce a new vnode-znode
pair, while the old one will be kept alive by the outstanding reference.
So, the outstanding reference will not actually be for the new root vnode
(or, more precisely, vnodes - because a root vnode may be recycled and a newer
one can be created).
As a result, when vflush(rootrefs = 1) s called there will be two problems:
- a leaked reference on the old root vnode preventing a graceful unmount
- insufficient references on the actual root vnode leading to a crash upon
access to the vnode after it is destroyed by vgone() + vdrop()
The second issue will actually override the first one.
Differential Revision: https://reviews.freebsd.org/D2353
Reviewed by: delphij, kib, smh
MFC after: 17 days
In traverse_visitbp(), the input argument dnp is modified in the middle
to point to a temporary buffer. Originally this doesn't matter, because
no user of TRAVERSE_POST dereferences it. However, in fbeddd6 a piece of
code is added dereferencing dnp after the modification, creating a possible
bug.
We fix this by creating a new local variable cdnp for the DMU_OT_DNODE case,
so we don't modify the input argument. Also we introduce different local
variables in the DMU_OT_OBJSET case to prevent confusion between the input
argument.
Obtained from: zfsonlinux (a585f2f844ed3d4270221fed88f5e494eb55d932)
MFC after: 2 weeks
Sponsored by: Multiplay
The old comment in zfs_rezget explains what situation the code handles,
the new comment also describes how the situation can arise.
Also, re-join a line that became sufficiently shorti some time ago.
Differential Revision: https://reviews.freebsd.org/D2352
Reviewed by: delphij, smh
MFC after: 12 days
/dev/zfs always has per-open data, so when it is missing the file
descriptor is for some other file. Returning ENOENT in this case
is confusing as a variety of other conditions (like a missing dataset)
may result in the same error. It's better to consistently return
EBADF for any problems with the file descriptor.
Note that zfs_onexit_fd_hold() is used with 'automatic cleanup fd'
- when that fd is closed, typically because a process is terminated,
some cleanup action is taken by ZFS driver. E.g. a temporary
snapshot hold is released.
Perhaps, it would even be worthwhile changing devfs_get_cdevpriv()
to return EBADF if there is no associated data.
Differential Revision: https://reviews.freebsd.org/D2370
Reviewed by: delphij, smh
MFC after: 12 days
skip 10, rather than 9, frames. This appears to work quite well in
practice on the BeagleBone Black, so remove a comment about the value
being bogus and replace it with a slightly less negative one. However,
the number of frames to skip is quite sensitive to details of the timer
and interrupt handling paths, so this is necessarily fragile -- but no
more so than on x86.
Sponsored by: DARPA, AFRL
It would previously call into some unfinished Solaris compatibility code and
return without actually calling panic(9). The compatibility code is
unneeded, however, so just remove it and have dtrace_panic() call vpanic(9)
directly.
Differential Revision: https://reviews.freebsd.org/D2349
Reviewed by: avg
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Passing "-x lazyload" to dtrace -G during compilation causes dtrace(1) to
not link drti.o into the output object file, so the USDT probes are not created
during process startup. Instead, dtrace(1) will automatically discover and
create probes on the process' behalf when attaching.
Differential Revision: https://reviews.freebsd.org/D2203
Reviewed by: rpaulo
MFC after: 1 month
Even on Illumos, with its much larger KVA, ZFS ARC steps back if KVA usage
reaches certain threshold (3/4 on i386 or 16/17 otherwise). FreeBSD has
even less KVA, but had no such limit on archs with direct map as amd64.
As result, on machines with a lot of RAM, during load with very small user-
space memory pressure, such as `zfs send`, it was possible to reach state,
when there is enough both physical RAM and KVA (I've seen up to 25-30%),
but no continuous KVA range to allocate even single 128KB I/O request.
Address this situation from two sides:
- restore KVA usage limitations in a way the most close to Illumos;
- introduce new requirement for KVA fragmentation, specifying that we
should have at least one sequential KVA range of zfs_max_recordsize bytes.
Experiments show that first limitation done alone is not sufficient. On
machine with 64GB of RAM it is sometimes needed to drop up to half of ARC
size to get at leats one 1MB KVA chunk. Statically limiting ARC to half
of KVA/RAM is too strict, so second limitation makes it to work in cycles:
accumulate trash up to certain critical mass, do massive spring-cleaning,
and then start littering again. :)
MFC after: 1 month
This adds an upper bound, dtrace_ustackdepth_max, to the number of frames
traversed when computing the userland stack depth. Some programs - notably
firefox - are otherwise able to trigger an infinite loop in
dtrace_getustack_common(), causing a panic.
MFC after: 1 week
traps do appear in the regular call stack, rather than only in a special
trap frame, so we don't need to inject the trap-frame $pc into a returned
stack trace in DTrace.
MFC after: 3 days
Sponsored by: DARPA, AFRL
skip using the DTrace 'profile' provider on ARM. This causes stack traces
to skip various driver-and callout-related things as they do on x86, where
the likewise arbitrary values are '6' (32-bit) and '10' (64-bit) for
similar sorts of reasons.
MFC after: 3 days
Sponsored by: DARPA, AFRL
If zvol_geom_start is called with a BIO_DELETE from a thread which can
sleep it queues it for later processing by the zvol_geom_worker. The
zvol_geom_worker didn't have a delete case so would simply loose the bio
hence preventing the original caller from every completing. In addition
an other unknown types would suffer the same fate.
Allow zvol_geom_worker to process BIO_DELETE's via zvol_strategy and
return unsupported for all unknown bio types.
MFC after: 2 weeks
Sponsored by: Multiplay
emulate the instructions used in function entry and exit.
For function entry ARM will use a push instruction to push up to 16
registers to the stack. While we don't expect all 16 to be used we need to
handle any combination the compiler may generate, even if it doesn't make
sense (e.g. pushing the program counter).
On function return we will either have a pop or branch instruction. The
former is similar to the push instruction, but with care to make sure we
update the stack pointer and program counter correctly in the cases they
are either in the list of registers or not. For branch we need to take the
24-bit offset, sign-extend it, and add that number of 4-byte words to the
program counter. Care needs to be taken as, due to historical reasons, the
address the branch is relative to is not the current instruction, but 8
bytes later.
This allows us to use the following probes on ARM boards:
dtrace -n 'fbt::malloc:entry { stack() }'
and
dtrace -n 'fbt:🆓return { stack() }'
Differential Revision: https://reviews.freebsd.org/D2007
Reviewed by: gnn, rpaulo
Sponsored by: ABT Systems Ltd
expected to return the data in the memory location pointed at by target
after the operation. The FreeBSD atomic functions previously used return
either 0 or 1 to indicate if the comparison succeeded or not respectively.
With this change these functions only support ARMv6 and later are supported
by these functions.
Sponsored by: ABT Systems Ltd
dtrace is able to display a stack trace similar to the one below.
# dtrace -p 603 -n 'tcp:kernel::receive { stack(); }'
0 70 :receive
kernel`ip_input+0x140
kernel`netisr_dispatch_src+0xb8
kernel`ether_demux+0x1c4
kernel`ether_nh_input+0x3a8
kernel`netisr_dispatch_src+0xb8
kernel`ether_input+0x60
kernel`cpsw_intr_rx+0xac
kernel`intr_event_execute_handlers+0x128
kernel`ithread_loop+0xb4
kernel`fork_exit+0x84
kernel`swi_exit
kernel`swi_exit
Tested by: gnn
Sponsored by: ABT Systems Ltd
cannot happen on FreeBSD. r278136 overlooked the fact that a destructor
registered with devfs_set_cdevpriv(9) is invoked even in the case of an
error.
X-MFC-With: r278136
This allows dtrace to monitor the calls to txg_quiesce which can be really
helpful.
Also standardise __noinline order for arc_kmem_reap_now.
Sponsored by: Multiplay
ZFS already commits outstanding data every zfs_txg_timeout seconds, so these
syncs are unnecessarily intrusive.
Submitted by: gibbs
Sponsored by: Spectra Logic
MFSpectraBSD: 1105759 on 2014/12/11
Since allow_mounted is a FreeBSD-specific change, default to B_TRUE, then
locally check for the magic bit. Unconditionally check allow_mounted below.
Convert the setting of allow_mounted to an explicit boolean.
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 672578 (in part) on 2013/07/19
This is primarily for developer/debugging use; it enables built-in tagged
tracking of refcounts inside ZFS. It can only be enabled from the loader,
since it modifies how in-core state is managed. Default remains disabled.
MFC after: 1 week
Sponsored by: Spectra Logic
Remove the unnecessary #ifdef _KERNEL, which did not differ in the true or
false cases. Actually set the value of to_free before using it.
MFC after: 1 week
Sponsored by: Spectra Logic
