Commit Graph

5739 Commits

Author SHA1 Message Date
Xin LI
7f94ca7233 Rename option 'C' to 'D' (damaged) in order to avoid a conflict with upcoming
Juniper 'C' (clean) flag.

Requested by:	obrien
MFC after:	1 week
2009-01-20 22:49:49 +00:00
Luigi Rizzo
daa9733afd Fix a number of (innocuous) warnings, and remove a useless test.
There are still several signed/unsigned warnings left, which
require a bit more study for a proper fix.

This file has grown beyond reasonable limits.

We really need to split it into separate components (ipv4, ipv6,
dummynet, nat, table, userland-kernel communication ...) so we can
make mainteinance easier.

MFC after:	1 weeks
2009-01-20 18:16:31 +00:00
Maxim Sobolev
e8bbeae7b0 Tone down warning about the quality of the NTFS VFS module. It appears that
not all developers share luigi opinion about quality of sysutils/fusefs-ntfs
compared to our kernel NTFS module.
2009-01-20 02:08:21 +00:00
Maxim Sobolev
940369b908 In the CAVEATS section mention the fact that the NTFS kernel support isn't
very well maintained and point user to sysutils/fusefs-ntfs, which
at the time of this writing seems to be a better alternative.

Suggested by:	luigi

MFC after:	2 weeks
2009-01-19 15:59:05 +00:00
Alexander Motin
b814ca8a4f Fix regression introduced in rev. 173124:
0.0.0.0/1 is not the same as 0.0.0.0/0.

MFC after:	1 month
2009-01-18 11:38:35 +00:00
Poul-Henning Kamp
972b3f3056 Bail on ENXIO, you won't get any further any way.
Submitted by:	tobez
2009-01-17 11:57:32 +00:00
Sam Leffler
5814deb84d Fix 1/2 and 1/4 width channel handling for non-GSM operation:
o correct typo that caused random channel selection
o explicitly add 1/2 and 1/4 width channels because channel lookups match
  flags that include IEEE80211_CHANNEL_HALF and IEEE80211_CHANNEL_QUARTER
2009-01-16 20:38:42 +00:00
Sam Leffler
fab0828067 use correct interface name when setting flags; fixes ifconfig ... create ... up
Noticed by:	Chris Anderson
2009-01-14 22:55:49 +00:00
Luigi Rizzo
31fade0527 Reword some entries for NTFS and DOS.
Add entries for DELL and ASUS recovery partitions.

MFC after:	3 days
2009-01-14 22:05:51 +00:00
Luigi Rizzo
22fccf5ce9 Another change from Christoph:
replace the table of partition with a simpler and faster array of strings.
The change in the array is done mechanically, using vi commands.
Most entries in the table are probably 15+ years old and largely outdated,
so the next step is to remove stale entries with more current values.

Submitted by:	Christoph Mallon, with small changes from me
MFC after:	3 days
2009-01-14 21:31:09 +00:00
Luigi Rizzo
40905b6e22 more changes from Christoph:
pass a pointer instead of an index to print_part()
so it does not depend on a static variable.

Submitted by:	Christoph Mallon
MFC after:	3 days
2009-01-14 21:08:19 +00:00
Luigi Rizzo
fbcb16efdf remove unused argument to print_s0()
Submitted by:	Christoph Mallon
MFC after:	3 days
2009-01-14 20:53:46 +00:00
Luigi Rizzo
c4898ccb7c Some small fixes submitted by Christoph Mallon, specifically:
+ Remove a dead field of a struct. It serves no purpose anymore.
+ Remove a \n at the end of the format string of err(); the err()
  function already adds a \n ;
+ remove many unnecessary casts which obfuscate the code.

This file has a huge number of indentation bugs, but I'd rather fix
them when/if we happen to modify the relevant parts of the code.

Submitted by:	Christoph Mallon
MFC after:	3 days
2009-01-13 23:36:38 +00:00
David E. O'Brien
0e969ed7e0 r187093 failed to keep the lifetime of the pointer suitable for reentrancy.
Fix that.  Also move the current buffer size into the 'cpa' structure.
2009-01-13 06:08:37 +00:00
David E. O'Brien
0035611858 Use a dynamically grown buffer for building the argv for the sub-mounts.
Also fix RCSid spamage.

Inspired by patch from:	Christoph Mallon <christoph.mallon@gmx.de>
2009-01-12 08:22:36 +00:00
Xin LI
07580acce5 Fix typo.
Submitted by:	Ben Kaduk <minimarmot gmail com>
MFC after:	3 days
2009-01-12 03:33:48 +00:00
Daniel Gerzo
7f220ecf72 - improve readability
Reviewed by:	trhodes, keramida
MFC after:	3 days
2009-01-11 22:36:45 +00:00
David E. O'Brien
a86de99566 Explicitly check each mount argv building assignment for buffer over flowing.
Reviewed by:	imp (earlier version of patch)
2009-01-10 20:54:47 +00:00
Edward Tomasz Napierala
a9ebb31183 Add the possibility to specify "-o force" with "mdconfig -du".
Reviewed by:	scottl
Approved by:	rwatson (mentor)
Sponsored by:	FreeBSD Foundation
2009-01-10 17:17:18 +00:00
Sam Leffler
10ad9a77f3 TDMA support for long distance point-to-point links using ath devices:
o add net80211 support for a tdma vap that is built on top of the
  existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
  conceivable other devices might be capable of this too in which case
  they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
  configure, new statistics in athstats, and new debug mask bits

While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.

Sponsored by:	Intel
2009-01-08 17:12:47 +00:00
Daniel Gerzo
0c868e9061 - rename the RETURN VALUES section to EXIT STATUS
- not bumping a date as this is not a real content change

Approved by:	ru
MFC after:	3 days
2009-01-07 00:51:41 +00:00
Simon L. B. Nielsen
0211d3b61c Minor markup fix for the r186836 update. 2009-01-06 21:16:42 +00:00
Colin Percival
4c55b9e02e Strengthen some of the language concerning attacks on MD5, in light of the
recent demonstration of a forged SSL certificate.  Add text pointing out
that SHA-1 is at least theoretically broken.  Add a recommendation that
new applications use SHA-256.

MFC after:	1 month
2009-01-06 19:25:24 +00:00
Tom Rhodes
c6b34b2563 Add missing qualifier which was missed in the previous commit.
Noticed by:	brooks
2009-01-05 12:10:22 +00:00
Daniel Gerzo
c419baec28 - grammar and language fixes
- hard sentence breaks
- trim EXIT STATUS section and move it to DIAGNOSTICS as well as use .Er
  macro
- sort SEE ALSO

MFC after:	7 days
2009-01-04 15:41:01 +00:00
Ivan Voras
2b67c28a09 Several significant updates:
* Better wording of sections dealing with physical storage
* A new section on assumptions gvirstor has on its consumer devices
  (components) and its interaction  with file systems
* Improved markup (by hrs@)

Reviewed by:	hrs
Approved by:	gnn (mentor)
2009-01-04 11:31:03 +00:00
Ulf Lilleengen
db2bf4b016 - Back out r186038. Rather than changing the intent of the caller, the problem
should be handled internally in gvinum.

Suggested by:	pjd
2008-12-27 14:24:24 +00:00
David E. O'Brien
c9c6feb62c style(9) 2008-12-26 22:55:38 +00:00
David E. O'Brien
76c4621653 Make the sub-'argc' static to make it harder to overwrite thru a buffer
overflow.
2008-12-26 22:54:53 +00:00
Tom Rhodes
138f7e4b30 Apply various fixes:
Silence mdoc(7) warnings;
Xref correct manual pages;
Point user to the ddb.8 manual page.

PR:		129398
Submitted by:	gavin
2008-12-24 11:12:21 +00:00
David E. O'Brien
defc9d504b Garbage collect 'fflags'. 2008-12-24 03:07:19 +00:00
Tom Rhodes
1aa26f525e Note that when shutdown is run without options, it will place
the system into single user mode at the time specified.

PR:		129765
2008-12-23 15:00:03 +00:00
Tom Rhodes
9ffd02d312 Document the "-o large" option.
PR:		129792
2008-12-23 13:35:26 +00:00
Andrew Thompson
97a7a5698b Only show the pathname in verbose output as intended in the last commit (r172862). 2008-12-22 19:52:21 +00:00
Paolo Pisati
a21e097b2e Update the ipfw man page to reflect last change (-q option with nat option).
MFC after:	3 days
2008-12-18 21:46:18 +00:00
Paolo Pisati
3fc7bd58bc Honor the quiet (-q) option while adding a nat rule.
Submitted by:	Andrey V. Elsukov<bu7cher@yandex.ru>
MFC after:	3 days
2008-12-18 21:37:31 +00:00
David E. O'Brien
fce5f960ba Be a little bit more pestimistic in argument handling - check if we've
overflown our internal buffer (though after the fact), and s/strncpy/strlcpy/

Reviewed by:	rodrigc
Obtained from:	Juniper Networks
2008-12-18 18:44:46 +00:00
Qing Li
6e6b3f7cbc This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
   possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
  the last piece of the puzzle, Kip has also been conducting
  active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
  provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
  me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
Sam Leffler
67207b6994 back out unintended change 2008-12-15 01:44:23 +00:00
Sam Leffler
ddd244ecff move channel parsing to a getchannel routine so it can be reused to check
the channel argument supplied to chanswitch
2008-12-15 01:15:15 +00:00
Sam Leffler
746b34ace7 fix handling of sku codes like country codes 2008-12-15 01:10:52 +00:00
Sam Leffler
76f0b9bff1 fix handling of unknown country codes; atoi doesn't return -1
for an invalid string as I thought; so use strtol instead
2008-12-15 01:10:08 +00:00
Sam Leffler
b6130d380f 0 is a potential ISO CC; use new NO_COUNTRY #define to identify
when the CC is not set.  Note NO_COUNTRY is set to 0xffff for now
(must be 16 bits as ieee80211_regdomain struct defines sku's and
cc's as uint16_t which may need fixing).
2008-12-15 01:09:01 +00:00
Sam Leffler
27c1a6f490 o distinguish between adhoc and ahdemo modes
o do not require 1/2 and 1/4 rate channels be present in the
  calibration list when doing a gsm regulatory change; the
  existing 900MHz cards are not self-identifying so there is
  no way (using the calibration channel list) to check
2008-12-15 01:06:49 +00:00
Sam Leffler
cf0d500765 Improve regdomain.xml parser:
o store XML_Parser in the state block so we can report line numbers for errors
o complain about netband w/o mode
o complain about unknown modes
o complain about band w/o enclosing netband
o complain about duplicate freqband
o complain about unknown channel flags
o complain about band w/o freqband's
o complain about band w/o maxpower
o complain about country w/o ISO cc
o complain about country w/o regdomain reference
2008-12-15 01:00:18 +00:00
Ruslan Ermilov
a794372087 Fix the fallouts from r146267:
- Add the forgotten "mode" argument to the "mode" command.
- Move the description of "info" to where it belongs.
2008-12-14 12:56:56 +00:00
Poul-Henning Kamp
0f3311c56f Send all debug to stderr. 2008-12-14 11:48:51 +00:00
Poul-Henning Kamp
877ed37a0d Clarify that configuration files must be named '*.conf' 2008-12-14 11:47:39 +00:00
Ulf Lilleengen
a468c003ef - When writing metadata to a geom provider, open the it as read-write since it
might do subsequent reads from other providers. This stopped geli (and
  probably other classes using g_metadata_store as well) from being put on top
  of gvinum raid5 volumes.

Note:
The reason it fails in the gvinum raid5 case is that gvinum will read back the
old parity stripe before calculating the new parity stripe to be written out
again.  The write will then fail because the underlying disk to be read is
opened write only.

MFC after:	1 week
2008-12-13 14:14:56 +00:00
Luigi Rizzo
59cf6deb68 Move the check for the ending char in the partition name where
it was before -- the check is only made when getdisklabel()
returns valid info.
On passing, use MAXPARTITIONS to identify the max partition number,
instead of the hardwired 'h'

MFC after:	4 weeks
2008-12-12 15:56:38 +00:00