sinovoip-bpi-m3.dts was disconnected from the build in r324822. Since then,
a CCU driver has been added and several other changes have been made to
make us compatible with upstream DTS for this board.
Add links for older DTB that might be used: our u-boot port was expecting
sinovoip-bpi-m3.dtb up until ports r455629, and our u-boot will not be
switching to the upstream name (sun8i-a83t-bananapi-m3) quite yet.
Discussed with: manu
Previously we set the csum_l3 flag for IPv4 and IPv6, but only IPv4
should have header checksumming applied.
Prompted by Linux commit fa6d7cb5d76cf0467c61420fc9238045aedfd379.
Reviewed by: bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13366
This fixes some regulator issues with a83t/BananaPi-M3; the pin value was
getting clobbered as we reconfigured the pin when initializing the
regulator.
Discussed with: ian
the stand environment that's safe to use (and insulated from whatever
build env you might normally have), stop hacking the bzlib and zlib
sources with sed. There's no longer any need.
Sponsored by: Netflix
Building with the standard system headers isn't a perfect match to the
stand environment. Instead, copy over the files we know are safe to
use and constrain what else is used. We use -nostdinc to achieve this.
This also fixes issues with building 32-bit libraries on amd64
sometimes pulling in the wrong cpufunc.h giving an error now that we
stop on errors. It will also enable an easier transition to lua boot.
Sponsored by: Netflix
latter aren't used. Prefer sys/link_elf.h to link.h so we're only
dependent on the kernel tree. The default installation of link.h just
includes this file, and any benefit from that is outweighed by the
hassle it causes. This reduces the footprint of files needed from the
system includes (or sysroot in buildworld).
Sponsored by: Netflix
Because we force enable MK_GCC when building we need to also force
enable it for the cleaning phase. Otherwise the NXB_TARGET files
are found in the next build's kernel-toolchain phase and cause
an error.
Reported by: sbruno
X-MFC-With: r325001
MFC after: 1 month
Sponsored by: Dell EMC
Several checks assume .CURDIR is resolved, such as for determining RELDIR from
SRCTOP/.CURDIR. If -C is used then the path is no longer resolved like it was
before which is problematic for symlinked source trees. A similar change was
also made to ports post bmake-20170301.
This fixes 'make -C <symlinked path> buildworld' using the wrong OBJDIR.
Reported by: rstone
Sponsored by: Dell EMC
This will cause an error if the wanted OBJDIR is not writable. Previously it
would cause the files to generate to the source tree. This was too obscure and
things like buildworld really expect a proper OBJDIR layout.
Sponsored by: Dell EMC
Some bnxt devices do not correctly send frames smaller than
52 bytes (without CRC), so add a quirk that will pad frames to an
arbitrary size before passing off to the encap routine.
Reported by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13269
The LRO possible test was calling CURVNET_SET once for IPv4 or IPv6 for
each packet in a chain. Only call it once per chain instead.
Submitted by: Matthew Macy <mmacy@mattmacy.io>
Reviewed by: cem, ae
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D13368
Using
.symver foo,foo@@VER
causes foo and foo@@VER to be output to the .o file. This requires foo
to be weak since the linker handles foo@@VER as foo.
Using
.symver foo,foo@@@VER
causes just foo@@ver to be output and avoid the need for making foo
weak. It also reduces the constraint on how exactly a linker has to
handle foo and foo@@VER being present.
Submitted by: Rafael Espíndola
Reviewed by: dim, kib
Differential Revision: https://reviews.freebsd.org/D11653
field, and support properly parse out the hostname as described by RFC3164,
which wasn't done before. However, don't discard message if it doesn't
have hostname, for compatibility.
Enable logging of the message supplied hostname instead of real hostname
with -H switch.
PR: 200933
Reported by: Konstantin Pavlov <thresh nginx.com>
MFC after: 2 months
- Updates tables in affected files with new entries from newer spec
revisions of SFF-8472, SFF-8024, and SFF-8636
- Change ifconfig to read and display the extended compliance code for
SFP media if the extended compliance code is not 0. This was being displayed
for QSFP transceivers only, but SFP28 media uses this to report 25G
capability.
Reviewed by: melifaro, sbruno
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D13286
The OBJS_DEPEND_GUESS mechanism was making vmx_genassym.o depend
on all headers along with vmx_assym.h, though vmx_assym.h depends
on having vmx_genassym.o present to generate. Moving the headers
to DPSRCS is enough to resolve the issue as they will no longer
be implicit dependencies for all objects. Because of this we
need explicit OBJS_DEPEND_GUESS entries to ensure the headers
are generated when needed for the *_support.o files that need
them.
X-MFC-With: r326552
MFC after: 2 weeks
Sponsored by: Dell EMC
Since Amazon provides NTP servers within their network, this should
be far superior to using the default NTP pools; and since the service
is provided by Amazon there's very little risk in enabling it by
default. (If someone is able to compromise Amazon's NTP servers and
exploit them to attack EC2 instances, they would almost certainly be
able to compromise EC2 instances even without ntpd running...)
MFC after: 1 week
Relnotes: EC2 instances now keep their clocks synchronized using
the Amazon Time Sync Service (aka. NTP).
EC2 instances are normally launched with an SSH public key specified,
which is then used for logging in (by default, as 'ec2-user'). Having
ChallengeResponseAuthentication enabled (as FreeBSD's default sshd_config
does) has no functional effect in a new EC2 instance, since you can't log
in using a password until a password has been set -- but having this
enabled results in alerts from automated scanning tools which can detect
that sshd advertises support for keyboard-interactive logins (since they
can't detect that accounts have no password set).
EC2 users who want to use passwords to log in to their instances will need
to set 'ChallengeResponseAuthentication yes' in FreeBSD 12.0 and later.
Discussed with: gjb, gtetlow, emaste, des
Requested by: Amazon
X-MFC: No
Relnotes: ChallengeResponseAuthentication is turned off by default in
Amazon EC2 AMIs.
the OFED buildworld target, WITH_OFED=YES, when the include files are not
already installed locally, but only in the temporary object directory.
Found by: kib
Sponsored by: Mellanox Technologies
Inputting fractional non-decimal numbers has never worked correctly in our
OpenBSD-derived dc(1). It truncates the input to a number of decimal places
equal to the number of hexadecimal (or whatever base) places given on the
input. That's unacceptable, because many numbers require more precision to
represent in base 10 than in their original bases.
Fix this bug by using as many decimal places as needed to represent the
input, up to the maximum of the global scale factor.
This has one mildly surprising side effect: the scale of a number entered in
non-decimal mode will no longer necessarily equal the number of hexadecimal
(or whatever base) places given on the input. I think that's an acceptable
behavior change, given that inputting fractional non-decimal numbers never
worked in the first place, and the man page doesn't specify whether trailing
zeros on the input should affect a number's scale.
PR: 206230
Reported by: nibbana@gmx.us
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D13336
sponge(1) is a utility that reads input until
complete, then opens the output file, then
writes to it. This makes it useful in pipelines
that read and write to the same file.
Reviewed by: wblock, jilles, imp, cem, danfe (all: various iterations)
Inspired by: https://joeyh.name/code/moreutils/
The initial kernel-toolchain is built with TARGET=MACHINE but
we want GCC to have files generated for TARGET=NXB_TARGET
instead later on. Just clean the files between building of
the toolchain and nxb binaries which will let it rebuild
when needed.
Reported by: sbruno
X-MFC-With: r325001
MFC after: 1 month
Sponsored by: Dell EMC
Previously, lld exited with an error status if the only option given to
the command was -v. GNU linkers gracefully exit in that case. This patch
makes lld behave like GNU.
Note that even with this patch, lld's -v and --version options behave
slightly differently than GNU linkers' counterparts. For example,
if you run ld.bfd -v -v, the version string is printed out twice.
But that is an edge case that I don't think we need to take care of.
Fixes https://bugs.llvm.org/show_bug.cgi?id=31582
Obtained from: LLVM r319717
MFC after: 1 week
