This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
register pairs where two 32-bit registers make up a larger logical
size. Support those access by splitting the quad-word into two
double-words.
Reviewed by: grehan
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
the system.
Together with lm75(4) this module allows easy temperature monitoring over
SNMP, specially for embedded systems.
Manual page reviewed by: brueffer (D128)
to 16. This is arbitrary and is used to ensure that a vcpu goes back into
the vm_run() loop to process interrupts or rendezvous events in a timely
fashion.
Found with: Coverity Scan
CID: 1216436
it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
Put the superblock in the correct possition for UFS2... There is a bug
in FFS that if we don't put it here (for UFS2), it will forcefully
relocate the superblock, and I believe cause data loss..
I have a fix for that, but w/ how many releases are broken, we won't be
able to switch to the better _FLOPPY (block 0) for this for a while..
o Teach vidcontrol(1) to distinct which virtual terminal system is running now.
o Load vt(4) fonts from different location.
o Add $FreeBSD$ tag for path.h.
Tested by: Claude Buisson <clbuisson@orange.fr>
MFC after: 7 days
Sponsored by: The FreeBSD Foundation
fault on the destination buffer.
Prior to this change a page fault would be detected in vm_copyout(). This
was done after the I/O port access was done. If the I/O port access had
side-effects (e.g. reading the uart FIFO) then restarting the instruction
would result in incorrect behavior.
Fix this by validating the guest linear address before doing the I/O port
emulation. If the validation results in a page fault exception being injected
into the guest then the instruction can now be restarted without any
side-effects.
API function 'vie_calculate_gla()'.
While the current implementation is simplistic it forms the basis of doing
segmentation checks if the guest is in 32-bit protected mode.
of the guest linear address space. These APIs in turn use a new ioctl
'VM_GLA2GPA' to convert the guest linear address to guest physical.
Use the new copyin/copyout APIs when emulating ins/outs instruction in
bhyve(8).
'struct vm_guest_paging'.
Check for canonical addressing in vmm_gla2gpa() and inject a protection
fault into the guest if a violation is detected.
If the page table walk is restarted in vmm_gla2gpa() then reset 'ptpphys' to
point to the root of the page tables.
the UART FIFO.
The emulation is constrained in a number of ways: 64-bit only, doesn't check
for all exception conditions, limited to i/o ports emulated in userspace.
Some of these constraints will be relaxed in followup commits.
Requested by: grehan
Reviewed by: tychon (partially and a much earlier version)
an embedded newline appearing within the options string surrounded by
double-quotes. Rework the logic that goes into setting dataset options on
the root pool dataset while we're here -- added two new variables (which
can be altered via scripting) ZFSBOOT_POOL_CREATE_OPTIONS and also
ZFSBOOT_BOOT_POOL_CREATE_OPTIONS for setting pool/dataset attributes at
the time of pool creation. The former is for setting options on the root
pool (zroot) and the latter is for setting options on the optional separate
boot pool (bootpool) implicitly enabled when using either GELI or MBR. The
default value for the root pool variable (ZFSBOOT_POOL_CREATE_OPTIONS) is
"-O compress=lz4 -O atime=off" and the default value for separate boot pool
variable (ZFSBOOT_BOOT_POOL_CREATE_OPTIONS) is NULL (no additional options
for the separate boot pool dataset).
Reviewed by: allanjude
MFC after: 7 days
X-MFC-with: r266107-266109
default for newsyslog(8).
The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to
install a default configuration to handle their own log files.
MFC after: 2 weeks
Relnotes: yes
In one case generating callgraph output from a 24MB system-wide sampling
data file took 17.4 seconds on average. Profiling showed pmcstat
spending a lot of time in strcmp, due to hash collisions.
Replacing the XOR-only hash with FNV-1a reduces the run time for my
test by 40%.
Replace usage of "prison" with "jail", since that term has mostly dropped
out of use. Note once at the beginning that the "prison" term is equivalent,
but do not use it otherwise. [1]
Some grammar issues.
Some mdoc formatting fixes.
Consistently use \(em for em dashes, with spaces around it.
Avoid contractions.
Prefer ssh to telnet.
PR: docs/176832 [1]
Approved by: hrs (mentor)
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
It starts off being used to track the grammar for the number of disks
(singular vs plural) and then it is reused as the list of available disks.
Replace the variable with disks_grammar and move 'disk' and 'disks' to
msg_ vars so they can be translated in the future.
Submitted by: Allan Jude <freebsd@allanjude.com>
Reviewed by: roberto
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Set compress=lz4 for the entire pool, removing it from the individual
datasets
Remove exec=no from /usr/src, breaks the test suite.
Submitted by: Allan Jude <freebsd@allanjude.com>
Reviewed by: roberto
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
encryption for swap, and optional gmirror for swap (which can be combined)
Submitted by: Allan Jude <freebsd@allanjude.com>
Requested By: roberto
Sponsored By: ScaleEngine Inc.
MFC after: 2 weeks
This has not added a lot of value when debugging bhyve issues while greatly
increasing the time and space required to store the core file.
Passing the "-C" option to bhyve(8) will change the default and dump guest
memory in the core dump.
Requested by: grehan
Reviewed by: grehan