This removes support for using DES, Triple DES, and RC4.
Reviewed by: cem, kp
Tested by: kp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24344
This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
Centralize the list of generated files required by linuxkpi consumers,
into the common variable. This way, consumers that use the variable
are insulated from possible changes in the list.
Reviewed by: hselasky, imp
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24137
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
reasons. Those have now left the tree, and with them the need to have machdep
files. Places that called the routines in quesiton have been removed
previously. Remove these files from the Makefile to tidy up.
The ixl driver now works on PowerPC64 and may be compiled in-kernel and
as a module.
Reviewed by: alfredo, erj
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23974
When iicbus is attached as child of Designware I2C controller it scans all
ACPI nodes for "I2C Serial Bus Connection Resource Descriptor" described
in section 19.6.57 of ACPI specs.
If such a descriptor is found, I2C child is added to iicbus, it's I2C
address, IRQ resource and ACPI handle are added to ivars. Existing
ACPI bus-hosted child is deleted afterwards.
The driver also installs so called "I2C address space handler" which is
disabled by default as nontested.
Set hw.iicbus.enable_acpi_space_handler loader tunable to 1 to enable it.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22901
Port aacraid driver to big-endian (BE) hosts.
The immediate goal of this change is to make it possible to use the
aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS
controllers.
Adapters supported by this driver expect FIB contents in little-endian
(LE) byte order. All FIBs have a fixed header part as well as a data
part that depends on the command being issued to the controller.
In this way, on BE hosts, the FIB header and all FIB data structures
used in aacraid.c and aacraid_cam.c need to be converted to LE before
being sent to the adapter and converted to BE when coming from it.
The functions to convert each struct are on aacraid_endian.c.
For little-endian (LE) targets, they are macros that expand
to nothing.
In some cases, when only a few fields of a large structure are used,
the fields are converted inline, by the code using them.
PR: 237463
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23887
For drmkpi (D23085) we don't want the Linux struct file as we don't emulate
everything. Also the prototypes should be in shmem_fs.h to have 100%
compatibility with Linux.
Reviewed by: hselasky
MFC after: Maybe
Differential Revision: https://reviews.freebsd.org/D23764
Namely, vmm.ko cannot be compiled without 'option SMP', the code uses
IPIs and LAPIC.
Recently systrace was forced over any configs, check for KDTRACE_HOOK
before compiling the dtrace/ modules.
Reviewed by: markj
Discussed with: mjg
Tested by: se (previous version)
Sponsored by: The FreeBSD Foundation (kib)
Differential revision: https://reviews.freebsd.org/D23699
I believe this is left over from when dtrace was being ported and
developed out-of-tree. Now it just ensures that dtrace.ko and a non-SMP
kernel have incompatible KBIs.
PR: 243711
Sponsored by: The FreeBSD Foundation
The Parallel Port SCSI adapter was interesting for 100MB ZIP drives, but is no
longer used or maintained. Remove it from the tree.
The Parallel Port microsequencer (microseq.9) is now mostly unused in the tree,
but remains. PPI still refrences it, but doesn't use its full functionality.
Relnotes: Yes
Reviewed by: rgrimes@, Ihor Antonov
Discussed on: arch@
Differential Revision: https://reviews.freebsd.org/D23389
the ! operator should have been a ~ instead:
Merge r357348 from the clang 10.0.0 import branch:
Disable new clang 10.0.0 warnings about converting the result of
shift operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable
it for this case.
Noticed by: cem
MFC after: 3 days
Disable new clang 10.0.0 warnings about converting the result of shift
operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable it
for this case.
MFC after: 3 days
operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable it
for this case.
MFC after: 3 days
if_vlan grew a dependency on opt_inet6.h in r356993
if_lagg and if_vlan both grew a dependency on opt_kern_tls.h in r351522
This is needed for standalone module builds of these guys.
It doesn't exist in mainline dts due to the issues related
with detaching and reattaching USB3 devices as mentioned in
https://patchwork.kernel.org/patch/10853381/
In case of FreeBSD, as a temporary workaround "usbconfig reset"
command can fix the problem.
Reviewed by: manu
We observe at least one problem: if a UDP socket is connect(2)-ed, then a
received packet that matches the connection cannot be matched to the
corresponding PCB because of an incorrect flow ID. That was oberved for DNS
requests from the libc resolver. We got this problem because FreeBSD
r343291 enabled code that can set rsstype of received packets to values
other than M_HASHTYPE_OPAQUE_HASH. Earlier that code was under 'ifdef
notyet'.
The essence of this change is to use the system-wide RSS key instead of
some historic hardcoded key when the software RSS is enabled and it is
configured to use Toeplitz algorithm (the default).
In all other cases, the driver reports the opaque hash type for received
packets while still using Toeplitz algorithm with the internal key.
PR: 242890
Reviewed by: pkelsey
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D23147
Intel Speed Shift is Intel's technology to control frequency in hardware,
with hints from software.
Let's get a working version of this in the tree and we can refine it from
here.
Submitted by: bwidawsk, scottph
Reviewed by: bcr (manpages), myself
Discussed with: jhb, kib (earlier versions)
With feedback from: Greg V, gallatin, freebsdnewbie AT freenet.de
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18028
This enables virtio modules on PowerPC* target.
On PowerPC64, drivers are also kernel builtin.
QEMU currently needs to be patched to in order to work on LE hosts due to known
issue affecting pre-1.0 (legacy) virtio drivers.
The patch was submitted to QEMU mail list by @afscoelho_gmail.com, available at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg01496.html
Submitted by: Alfredo Dal'Ava Junior <alfredo.junior@eldorado.org.br>
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22833
This overlays can be used on A64 board to use spigen and spi(8)
on the spi0 pins.
Tested On: Pine64-LTS, A64-Olinuxino
Submitted by: Gary Otten <gdotten@gmail.com>
An i2c bus can be divided into segments which can be selectively connected
and disconnected from the main bus. This is usually done to enable using
multiple slave devices having the same address, by isolating the devices
onto separate bus segments, only one of which is connected to the main bus
at once.
There are several types of i2c bus muxes, which break down into two general
categories...
- Muxes which are themselves i2c slaves. These devices respond to i2c
commands on their upstream bus, and based on those commands, connect
various downstream buses to the upstream. In newbus terms, they are both
a child of an iicbus and the parent of one or more iicbus instances.
- Muxes which are not i2c devices themselves. Such devices are part of the
i2c bus electrically, but in newbus terms their parent is some other
bus. The association with the upstream bus must be established by
separate metadata (such as FDT data).
In both cases, the mux driver has one or more iicbus child instances
representing the downstream buses. The mux driver implements the iicbus_if
interface, as if it were an iichb host bridge/i2c controller driver. It
services the IO requests sent to it by forwarding them to the iicbus
instance representing the upstream bus, after electrically connecting the
upstream bus to the downstream bus that hosts the i2c slave device which
made the IO request.
The net effect is automatic mux switching which is transparent to slaves on
the downstream buses. They just do i2c IO they way they normally do, and the
bus is electrically connected for the duration of the IO and then idled when
it is complete.
The existing iicbus_if callback() method is enhanced so that the parameter
passed to it can be a struct which contains a device_t for the requesting
bus and slave devices. This change is done by adding a flag that indicates
the extra values are present, and making the flags field the first field of
a new args struct. If the flag is set, the iichb or mux driver can recast
the pointer-to-flags into a pointer-to-struct and access the extra
fields. Thus abi compatibility with older drivers is retained (but a mux
cannot exist on the bus with the older iicbus driver in use.)
A new set of core support routines exists in iicbus.c. This code will help
implement mux drivers for any type of mux hardware by supplying all the
boilerplate code that forwards IO requests upstream. It also has code for
parsing metadata and instantiating the child iicbus instances based on it.
Two new hardware mux drivers are added. The ltc430x driver supports the
LTC4305/4306 mux chips which are controlled via i2c commands. The
iic_gpiomux driver supports any mux hardware which is controlled by
manipulating the state of one or more gpio pins. Test Plan
Tested locally using a variety of mux'd bus configurations involving both
ltc4305 and a homebrew gpio-controlled mux. Tested configurations included
cascaded muxes (unlikely in the real world, but useful to prove that 'it all
just works' in terms of the automatic switching and upstream forwarding of
IO requests).
This code was not actively maintained since it was introduced 10 years ago.
It lacks support for many later GEOM features, such as direct dispatch,
unmapped I/O, stripesize/stripeoffset, resize, etc. Plus it is the only
remaining use of GEOM nstart/nend request counters, used there to implement
live insertion/removal, questionable by itself. Plus, as number of people
commented, GEOM is not the best place for I/O scheduler, since it has
limited information about layers both above and below it, required for
efficient scheduling. Plus with the modern shift to SSDs there is just no
more significant need for this kind of scheduling.
Approved by: imp, phk, luigi
Relnotes: yes
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
array with a singleton.
Also, pccbb isa attachment is never going to happen, do disconnect it from the
build (will delete this in future commit). It would need to be updated as well,
but since this code is effectively dead code, remove it from the build instead.
datagrams.
Previously destination address from original datagram was used. That
looked confusing, especially in the traceroute6 output.
Also honor IPSTEALTH kernel option and do TTL/HLIM decrementing only
when stealth mode is disabled.
Reported by: Marco van Tol <marco at tols org>
Reviewed by: melifaro
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D22631
These were obtained from the Chelsio Unified Wire v3.12.0.1 beta
release.
Note that the firmwares are not uuencoded any more.
MFH: 1 month
Sponsored by: Chelsio Communications
ConnectX-6 DX.
Currently TLS v1.2 and v1.3 with AES 128/256 crypto over TCP/IP (v4
and v6) is supported.
A per PCI device UMA zone is used to manage the memory of the send
tags. To optimize performance some crypto contexts may be cached by
the UMA zone, until the UMA zone finishes the memory of the given send
tag.
An asynchronous task is used manage setup of the send tags towards the
firmware. Most importantly setting the AES 128/256 bit pre-shared keys
for the crypto context.
Updating the state of the AES crypto engine and encrypting data, is
all done in the fast path. Each send tag tracks the TCP sequence
number in order to detect non-contiguous blocks of data, which may
require a dump of prior unencrypted data, to restore the crypto state
prior to wire transmission.
Statistics counters have been added to count the amount of TLS data
transmitted in total, and the amount of TLS data which has been dumped
prior to transmission. When non-contiguous TCP sequence numbers are
detected, the software needs to dump the beginning of the current TLS
record up until the point of retransmission. All TLS counters utilize
the counter(9) API.
In order to enable hardware TLS offload the following sysctls must be set:
kern.ipc.mb_use_ext_pgs=1
kern.ipc.tls.ifnet.permitted=1
kern.ipc.tls.enable=1
Sponsored by: Mellanox Technologies
The hardware offload is primarily targeted for TLS v1.2 and v1.3,
using AES 128/256 bit pre-shared keys. This patch adds all the needed
hardware structures, capabilites and firmware commands.
Sponsored by: Mellanox Technologies
This adds support for ifnet (NIC) KTLS using Chelsio T6 adapters.
Unlike the TOE-based KTLS in r353328, NIC TLS works with non-TOE
connections.
NIC KTLS on T6 is not able to use the normal TSO (LSO) path to segment
the encrypted TLS frames output by the crypto engine. Instead, the
TOE is placed into a special setup to permit "dummy" connections to be
associated with regular sockets using KTLS. This permits using the
TOE to segment the encrypted TLS records. However, this approach does
have some limitations:
1) Regular TOE sockets cannot be used when the TOE is in this special
mode. One can use either TOE and TOE-based KTLS or NIC KTLS, but
not both at the same time.
2) In NIC KTLS mode, the TOE is only able to accept a per-connection
timestamp offset that varies in the upper 4 bits. Put another way,
only connections whose timestamp offset has the 28 lower bits
cleared can use NIC KTLS and generate correct timestamps. The
driver will refuse to enable NIC KTLS on connections with a
timestamp offset with any of the lower 28 bits set. To use NIC
KTLS, users can either disable TCP timestamps by setting the
net.inet.tcp.rfc1323 sysctl to 0, or apply a local patch to the
tcp_new_ts_offset() function to clear the lower 28 bits of the
generated offset.
3) Because the TCP segmentation relies on fields mirrored in a TCB in
the TOE, not all fields in a TCP packet can be sent in the TCP
segments generated from a TLS record. Specifically, for packets
containing TCP options other than timestamps, the driver will
inject an "empty" TCP packet holding the requested options (e.g. a
SACK scoreboard) along with the segments from the TLS record.
These empty TCP packets are counted by the
dev.cc.N.txq.M.kern_tls_options sysctls.
Unlike TOE TLS which is able to buffer encrypted TLS records in
on-card memory to handle retransmits, NIC KTLS must re-encrypt TLS
records for retransmit requests as well as non-retransmit requests
that do not include the start of a TLS record but do include the
trailer. The T6 NIC KTLS code tries to optimize some of the cases for
requests to transmit partial TLS records. In particular it attempts
to minimize sending "waste" bytes that have to be given as input to
the crypto engine but are not needed on the wire to satisfy mbufs sent
from the TCP stack down to the driver.
TCP packets for TLS requests are broken down into the following
classes (with associated counters):
- Mbufs that send an entire TLS record in full do not have any waste
bytes (dev.cc.N.txq.M.kern_tls_full).
- Mbufs that send a short TLS record that ends before the end of the
trailer (dev.cc.N.txq.M.kern_tls_short). For sockets using AES-CBC,
the encryption must always start at the beginning, so if the mbuf
starts at an offset into the TLS record, the offset bytes will be
"waste" bytes. For sockets using AES-GCM, the encryption can start
at the 16 byte block before the starting offset capping the waste at
15 bytes.
- Mbufs that send a partial TLS record that has a non-zero starting
offset but ends at the end of the trailer
(dev.cc.N.txq.M.kern_tls_partial). In order to compute the
authentication hash stored in the trailer, the entire TLS record
must be sent as input to the crypto engine, so the bytes before the
offset are always "waste" bytes.
In addition, other per-txq sysctls are provided:
- dev.cc.N.txq.M.kern_tls_cbc: Count of sockets sent via this txq
using AES-CBC.
- dev.cc.N.txq.M.kern_tls_gcm: Count of sockets sent via this txq
using AES-GCM.
- dev.cc.N.txq.M.kern_tls_fin: Count of empty FIN-only packets sent to
compensate for the TOE engine not being able to set FIN on the last
segment of a TLS record if the TLS record mbuf had FIN set.
- dev.cc.N.txq.M.kern_tls_records: Count of TLS records sent via this
txq including full, short, and partial records.
- dev.cc.N.txq.M.kern_tls_octets: Count of non-waste bytes (TLS header
and payload) sent for TLS record requests.
- dev.cc.N.txq.M.kern_tls_waste: Count of waste bytes sent for TLS
record requests.
To enable NIC KTLS with T6, set the following tunables prior to
loading the cxgbe(4) driver:
hw.cxgbe.config_file=kern_tls
hw.cxgbe.kern_tls=1
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21962
