(> PAGE_SIZE) zones. If zone is not multiple to PAGE_SIZE, there may
be enough space for the header at the last page, so we may avoid extra
header memory allocation and hash table update/lookup.
ZFS creates bunch of odd-sized UMA zones (5120, 6144, 7168, 10240, 14336).
This change gives good use to at least some of otherwise lost memory there.
Reviewed by: avg
There are good reasons for this to happen, such as recursion prevention, etc.
and they are not fatal since buckets are just an optimization mechanism.
Real bucket allocation failures are any way counted by the bucket zones
themselves, and we don't need double accounting there.
was used without making sure first that it was really passed for us.
On some of my systems this bug made user argument passed by ZFS code to
uma_zalloc_arg() unexpectedly block UMA per-CPU caches for those zones.
This is a last resort for very low memory condition in case other measures
to free memory were ineffective. Sequentially cycle through all CPUs and
extract per-CPU cache buckets into zone cache from where they can be freed.
Lock congestion is the same, whether it happens on alloc or free, so
handle it equally. Now that we have back pressure, there is no problem
to grow buckets a bit faster. Any way growth is much slower then in 9.x.
These new buckets make bucket size self-tuning more soft and precise.
Without them there are buckets for 1, 5, 13, 29, ... items. While at
bigger sizes difference about 2x is fine, at smallest ones it is 5x and
2.6x respectively. New buckets make that line look like 1, 3, 5, 9, 13,
29, reducing jumps between steps, making algorithm work softer, allocating
and freeing memory in better fitting chunks. Otherwise there is quite a
big gap between allocating 128K and 5x128K of RAM at once.
Every time system detects low memory condition decrease bucket sizes for
each zone by one item. As result, higher memory pressure will push to
smaller bucket sizes and so smaller per-CPU caches and so more efficient
memory use.
Before this change there was no force to oppose buckets growth as result
of practically inevitable zone lock conflicts, and after some run time
per-CPU caches could consume enough RAM to kill the system.
The consequence of the bug is that fini calls are not done
when a slab is freed by a call-back from the page daemon.
It went unnoticed for two months because fini is little used.
I spotted the bug while reading the code to learn how it works
so I could write it up for the next edition of the Design and
Implementation of FreeBSD book.
No MFC needed as this code exists only in HEAD.
Reviewed by: kib, jeff
Tested by: pho
additional information, when the page is guaranteed to not belong to a
paging queue. Usually, this results in a lot of type casts which make
reasoning about the code correctness harder.
Sometimes m->object is used instead of pageq, which could cause real
and confusing bugs if non-NULL m->object is leaked. See r141955 and
r253140 for examples.
Change the pageq member into a union containing explicitly-typed
members. Use them instead of type-punning or abusing m->object in x86
pmaps, uma and vm_page_alloc_contig().
Requested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
through bucket_alloc() to uma_zalloc_arg() and uma_zfree_arg().
- Make some smaller buckets for large zones to further reduce memory
waste.
- Implement uma_zone_reserve(). This holds aside a number of items only
for callers who specify M_USE_RESERVE. buckets will never be filled
from reserve allocations.
Sponsored by: EMC / Isilon Storage Division
- Be more explicit about zone vs keg locking. This functionally changes
almost nothing.
- Add a size parameter to uma_zcache_create() so we can size the buckets.
- Pass the zone to bucket_alloc() so it can modify allocation flags
as appropriate.
- Fix a bug in zone_alloc_bucket() where I missed an address of operator
in a failure case. (Found by pho)
Sponsored by: EMC / Isilon Storage Division
performance.
- Always free to the alloc bucket if there is space. This gives LIFO
allocation order to improve hot-cache performance. This also allows
for zones with a single bucket per-cpu rather than a pair if the entire
working set fits in one bucket.
- Enable per-cpu caches of buckets. To prevent recursive bucket
allocation one bucket zone still has per-cpu caches disabled.
- Pick the initial bucket size based on a table driven maximum size
per-bucket rather than the number of items per-page. This gives
more sane initial sizes.
- Only grow the bucket size when we face contention on the zone lock, this
causes bucket sizes to grow more slowly.
- Adjust the number of items per-bucket to account for the header space.
This packs the buckets more efficiently per-page while making them
not quite powers of two.
- Eliminate the per-zone free bucket list. Always return buckets back
to the bucket zone. This ensures that as zones grow into larger
bucket sizes they eventually discard the smaller sizes. It persists
fewer buckets in the system. The locking is slightly trickier.
- Only switch buckets in zalloc, not zfree, this eliminates pathological
cases where we ping-pong between two buckets.
- Ensure that the thread that fills a new bucket gets to allocate from
it to give a better upper bound on allocation time.
Sponsored by: EMC / Isilon Storage Division
backing memory that is only a container for per-cpu caches of arbitrary
pointer items. These zones have no kegs.
- Convert the regular keg based allocator to use the new import/release
functions.
- Move some stats to be atomics since they would require excessive zone
locking/unlocking with the new import/release paradigm. Make
zone_free_item simpler now that callers can manage more stats.
- Check for these cache-only zones in the public APIs and debugging
code by checking zone_first_keg() against NULL.
Sponsored by: EMC / Isilong Storage Division
bitmap using sys/bitset. This is much simpler, has lower space
overhead and is cheaper in most cases.
- Use a second bitmap for invariants asserts and improve the quality of
the asserts as well as the number of erroneous conditions that we will
catch.
- Drastically simplify sizing code. Special case refcnt zones since they
will be going away.
- Update stale comments.
Sponsored by: EMC / Isilon Storage Division
These zones have slab size == sizeof(struct pcpu), but request from VM
enough pages to fit (uk_slabsize * mp_ncpus). An item allocated from such
zone would have a separate twin for each CPU in the system, and these twins
are at a distance of sizeof(struct pcpu) from each other. This magic value
of distance would allow us to make some optimizations later.
To address private item from a CPU simple arithmetics should be used:
item = (type *)((char *)base + sizeof(struct pcpu) * curcpu)
These arithmetics are available as zpcpu_get() macro in pcpu.h.
To introduce non-page size slabs a new field had been added to uma_keg
uk_slabsize. This shifted some frequently used fields of uma_keg to the
fourth cache line on amd64. To mitigate this pessimization, uma_keg fields
were a bit rearranged and least frequently used uk_name and uk_link moved
down to the fourth cache line. All other fields, that are dereferenced
frequently fit into first three cache lines.
Sponsored by: Nginx, Inc.
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
Replace the sub-optimal uma_zone_set_obj() primitive with more modern
uma_zone_reserve_kva(). The new primitive reserves before hand
the necessary KVA space to cater the zone allocations and allocates pages
with ALLOC_NOOBJ. More specifically:
- uma_zone_reserve_kva() does not need an object to cater the backend
allocator.
- uma_zone_reserve_kva() can cater M_WAITOK requests, in order to
serve zones which need to do uma_prealloc() too.
- When possible, uma_zone_reserve_kva() uses directly the direct-mapping
by uma_small_alloc() rather than relying on the KVA / offset
combination.
The removal of the object attribute allows 2 further changes:
1) _vm_object_allocate() becomes static within vm_object.c
2) VM_OBJECT_LOCK_INIT() is removed. This function is replaced by
direct calls to mtx_init() as there is no need to export it anymore
and the calls aren't either homogeneous anymore: there are now small
differences between arguments passed to mtx_init().
Sponsored by: EMC / Isilon storage division
Reviewed by: alc (which also offered almost all the comments)
Tested by: pho, jhb, davide
will be printed once the given zone becomes full and cannot allocate an
item. The warning will not be printed more often than every five minutes.
All UMA warnings can be globally turned off by setting sysctl/tunable
vm.zone_warnings to 0.
Discussed on: arch
Obtained from: WHEEL Systems
MFC after: 2 weeks
low memory situation. I've observed a situation where per-CPU
allocations were disabled while there were enough free cached pages.
Basically, cnt.v_free_count was sitting stable at a value lower
than cnt.v_free_min and that caused massive performance drop.
Reviewed by: alc
MFC after: 1 week
excluding other allocations including UMA now entails the addition of
a single flag to kmem_alloc or uma zone create
Reviewed by: alc, avg
MFC after: 2 weeks
uma_startup2() was called. Thus, setting the variable "booted" to true in
uma_startup() was ok on machines with UMA_MD_SMALL_ALLOC defined, because
any allocations made after uma_startup() but before uma_startup2() could be
satisfied by uma_small_alloc(). Now, however, some multipage allocations
are necessary before uma_startup2() just to allocate zone structures on
machines with a large number of processors. Thus, a Boolean can no longer
effectively describe the state of the UMA allocator. Instead, make "booted"
have three values to describe how far initialization has progressed. This
allows multipage allocations to continue using startup_alloc() until
uma_startup2(), but single-page allocations may begin using
uma_small_alloc() after uma_startup().
2. With the aforementioned change, only a modest increase in boot pages is
necessary to boot UMA on a large number of processors.
3. Retire UMA_MD_SMALL_ALLOC_NEEDS_VM. It has only been used between
r182028 and r204128.
Reviewed by: attilio [1], nwhitehorn [3]
Tested by: sbruno
sbuf_new_for_sysctl(9). This allows using an sbuf with a SYSCTL_OUT
drain for extremely large amounts of data where the caller knows that
appropriate references are held, and sleeping is not an issue.
Inspired by: rwatson
zones whose objects are larger than a page to use startup_alloc(). This
allows allocation of zone objects during early boot on machines with a large
number of CPUs since the resulting zone objects are larger than a page.
Submitted by: trema
Reviewed by: attilio
MFC after: 1 week
rounding. The same value can also be obtained with uma_zone_get_max, but this
change avoids a caller having to make two back-to-back calls.
Sponsored by: FreeBSD Foundation
Reviewed by: gnn, jhb
- Add uma_zone_get_cur which returns the current approximate occupancy of
a zone. This is useful for providing stats via sysctl amongst other things.
Sponsored by: FreeBSD Foundation
Reviewed by: gnn, jhb
MFC after: 2 weeks
