This fixes a bug when two windows use different fonts, but a longer-term
solution is required. The dirty area should be stored as pixels, not
character cells, because such coordinates don't have the same meaning in
all windows, when using different fonts.
MFC after: 1 week
Compared to the deprecated vd_bitbltchr_t callback, vd_bitblt_text_t
receives:
o the whole text buffer
o the dirty area
o the mouse cursor (map, position, colors)
This allows the backend to perform optimization on how to draw things.
The goal is to remove vd_bitbltchr_t and vd_putchar_t, once all driver
are converted (only vt_vga is included in this commit).
In vt_vga, this allows to draw the text and the cursor in one pass,
without ever reading from video memory (because it has all the context).
The main benefit is the speed improvement: no more slideshow during
boot!
Other bugs fixed in vt_vga are:
o left-most characters are drawn properly (the left-most pixels were
missing with bold characters and some wide letters such as 'm')
o no more black square around the cursor
o no cursor flickering when the text is scrolling
There are still many problems to fix: the known issues are marked with
"FIXME" inside the code.
MFC after: 1 week
ignored or default, are not leaking. Apparently, there exists code
which relies on SA_SIGINFO not reported for SIG_DFL or SIG_IGN.
In kern_sigaction, ignore flags when resetting. Encapsulate the flag
and disposition testing into helper sigact_flag_test().
On exec, and when delivering signal with SA_RESETHAND flag set,
signals are reset automatically. Use new helper sigdflt(), which
removes duplicated code and corrects all flag bits for the signal.
For proc0, set sigintr bit for all ignored signals. Ignored signals
are consumed in tdsendsignal() and not delivered to the victim thread
at all.
Reported and tested by: royger
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
We haven't noticed that it was missing because eisa has been disabled for
a while in -current, but it became apparent when some parallel-build stuff
was MFC'd to 10-stable and this module failed to build there.
This provides a minor cleanup in elfdump; there are otherwise no
consumers in the tree. Old SUN documentation can be found for either
variant, but GNU binutils switched to DT_FEATURE around 2000.
Sponsored by: The FreeBSD Foundation
The goal is to clear the video memory, in case an application drew to
it. So the content shouldn't be loaded in the latches, it can't be
trusted anyway.
This improves a bit the window switch speed.
MFC after: 1 week
At the same time, "w" and "h" members are now called "width" and
"height". The goal is to have a more "public" structure, because it will
soon be passed as argument to a new callback, replacing vd_bitbltchr_t.
MFC after: 1 week
Later, we just see if the "struct mouse_cursor" pointer is set. This
avoids the need to mess with all the conditions several times; this has
been error prone.
While here, rename the variable "m" to a more meaningful "cursor", like
it's done elsewhere in the code.
MFC after: 1 week
QSFP+ data via i2c inteface. These constants has been taken
from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
such as Chelsio T5.
This commit does not contain ioctl changes necessary for this
functionality work, there will be another commit soon.
Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
ether 00:07:43:28:ad:08
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 40Gbase-LR4 <full-duplex>
status: active
plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
module temperature: 64.06 C voltage: 3.26 Volts
lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)
Tested on: Chelsio T5
Tested on: Mellanox/Huawei passive/active cables/transceivers.
MFC after: 2 weeks
Sponsored by: Yandex LLC
This fixes bad looking refresh when switching window: squares instead
of text, flashing screen, and so on. In the worst case, vt_flush() came
at a very inappropriate timing and the screen was not refreshed at all
(leaving squares all over the place).
This doesn't fix the flickering of the screen with vt_vga, because the
sync signal is temporarily stopped and the video memory is cleared.
MFC after: 1 week
Like r270273, this has no effect for now, because the cursor is always
drawn. This is in preparation of future changes to vd_bitbltchr_t API.
MFC after: 1 week
Currently, this has no effect, because the cursor is always redrawn
anyway. But this will be useful after improvements to the vd_bitbltchr_t
callback API.
The vt_device structure members used to store the position of the cursor
as of the last redraw are renamed from vd_mdirty{x,y} to vd_mold{x,y}.
The associated comment is fixed too. Also, their value is now expressed
in pixels, not in character columns/row.
MFC after: 1 week
This avoids unnecessary redraw. In particular, during boot, where the
cursor is disabled and its fake position is [0;0], this triggered a
refresh of the whole screen each time vt_flush() is called.
MFC after: 1 week
Before the global flag was set/unset using the CONS_MOUSECTL ioctl, and
the per-window flag through the MOUSE_SETLEVEL or MOUSE_SETMODE ioctls.
Also, if the cursor is already enabled/disabled, return immediatly. This
avoids to reset the cursor's position to the center of the screen.
This matches syscons' behavior.
While here, remove a trailing space and a redundant variable
declaration.
that's only mostly similar. Specifically word 78 bits are defined for
IDENTIFY DEVICE as
5 Supports Hardware Feature Control
while a IDENTIFY PACKET DEVICE defines them as
5 Asynchronous notification supported
Therefore, only pay attention to bit 5 when we're talking to ATAPI
devices (we don't use the hardware feature control at this time).
Ignore it for ATA devices. Remove kludge that papered over this issue
for Samsung SATA SSDs, since Micron drives also have the bit set and
the error was caused by this bad interpretation of the spec (which is
quite easy to do, since bits aren't normally overlapping like this).
. interrupt storm detected on "intr70:"; throttling interrupt source;
. Added access serialization on iicbus_transfer(), previously there was
no such protection and a new transfer could easily confuse the
controller;
. Add error checkings (i.e. stop the transfer when a error is detected
and do _not_ overwrite the previous error);
. On command done interrupt do not assume that the transfer was finished
sucessfully as we will receive the command done interrupt even after
errors;
. Simplify the FIFO handling;
. Reset the FIFO between the transfers as the FIFO may contain data from
the last (failed) transfer;
. Fix the iicbus speed for AM335x, which in turn will make better use of
the I2C noise filter (set to one internal clock cycle);
. Move the read and write handler to ithread instead of notifying the
requesting thread with wakeup(9);
. Fix the comments based on OMAP4 TRM.
The above changes allows me to read the EDID from my HDMI monitor on BBB
with gonzo's patches to support TDA19988 (which does 128 bytes reads) and
repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus.
Phabric: D465
This should not be an ABI change since the various public APIs that use
cpusets all include an explicit size parameter in addition to the cpuset
parameter.
MFC after: 1 week
This is (yet another) step towards the removal of device
cloning from our kernel.
CR: https://reviews.freebsd.org/D441
Reviewed by: kib, rwatson
Tested by: pho
Make the functions pci_disable_msi, pci_enable_msi and pci_enable_msix
methods of the newbus PCI bus. This code should not include any
functional change.
Sponsored by: Citrix Systems R&D
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D354
dev/pci/pci.c:
- Convert the mentioned functions to newbus methods.
- Fix the callers of the converted functions.
sys/dev/pci/pci_private.h:
dev/pci/pci_if.m:
- Declare the new methods.
dev/pci/pcivar.h:
- Add helpers to call the newbus methods.
ofed/include/linux/pci.h:
- Add define to prevent the ofed version of pci_enable_msix from
clashing with the FreeBSD native version.
I've decided that for 11n rates it's best to start (very) low and work
our way up.
So, from now on, the initial rate for AMRR 11n is MCS4.
It doesn't try MCS12 or MCS20 - at low signal strengths those don't
work very well at all.
AMRR will step the rate control up over time if things work out better.
Tested:
* Intel 5100
* Intel 5300 (using local diffs to test out 3x3 stream support)
kern_renameat() already starts write on the mp, which prevents
parallel unmount from proceed. Busying mp after vn_start_write()
deadlocks the unmount.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
unmount. There is no need to suspend read-only filesystem, while we
need suspension on modificable mount point.
Reported by: rwatson
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Eventually, the vmd_segs of the struct vm_domain should become bitset
instead of long, to allow arbitrary compile-time selected maximum.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
physical address of the page to direct map address, in case
SFBUF_OPTIONAL_DIRECT_MAP returns true. The case of PowerPC AIM
64bit, where the page physical address is identical to the direct map
address, is accidental.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
