This commit splits all of the logodefs/graphics out into their own own files
and provides a method for these files to register their logodefs with the
drawer. Graphics are now loaded on demand if they don't exist in the current
set of logodefs.
The drawer module becomes a little easier to navigate through without all of
the graphics mixed in. It's also easy to do one-off graphics like the
9.2 Die Hard tribute by dteske@ without adding even more to our memory
requirements.
- No need for a 'goto' when our entire loop body is then wrapped in a
conditional.
- No need to leave commented out prints laying around
- If an expression is clearly going to be either nil or an expression that
isn't likely to be a boolean, we might as well use `or` to specify a
default value for the expression. e.g. `loader.getenv(...) or "no"`
The previous iteration of this assumed that {module}_load was set. In the
old world order of default loader.conf(5), this was probably a safe
assumption given that we had almost every module explicitly not-loaded in
it.
In the new world order, this is no longer the case, so one could delete a
_load line inadvertently while leaving a _name, _type, _flags, _before,
_after, or _error. This would have caused a confusing Lua error and borked
module loading.
If the network interface or the uefi implementation do not support the
ReceiveFilter interface do not return only and just print a message.
U-Boot doesn't support is and likely never will. Also even if this fails
it doesn't mean that network in EFI isn't supported.
hrs@ and kuriyama@ have found that on some HP BIOS, a system will fail to
boot immediately after installation with the claim that it can't work out
which disk they are booting from.
They tracked it down to a buffer overrun, and found that it could be
alleviated by doing a dummy read before-hand.
Submitted by: kuriyama
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14341
zfsloader(8) fails to probe a slice containing ZFS pool if its second sector
contains traces of BSD label (DISKMAGIC == 0x82564557).
Fix manual page to show working example erasing such traces.
PR: 226714
Approved by: avg (mentor)
MFC after: 3 days
It was previously only printed, but we do actually want to raise it as a
full blown error so that things don't look OK when they've actually gone
wrong.
The second parameter to error, level, is set to 2 here so that the error
message reflects the position of the try_include caller, rather than the
try_include itself. Example:
LUA ERROR: /boot/lua/loader.lua:46: /boot/lua/local.lua:1: attempt to call a
nil value (global 'cxcint').
This provides a way to optionally include a module without having to wrap it
in filesystem checks. try_include is a little more robust, using the lua
search path instead of forcing us to explicitly consider all of the places
we could want to include a module. Errors are still generally raised from
trying to load the module, but ENOENT will not get raised unless we're doing
a verbose load.
This will also be used to split out logo/brand graphics into their own files
so that we can safely scale up the number of graphics included without
worrying about the extra memory consumption- opting to lazily load graphics
instead.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D14658
UGA does not have the same kind of mode enumeration that GOP does. Implement
it instead as a call to text_autoresize so that firmwares with only UGA
present still get some kind of autoresizing behavior.
While here, rename a typo'd "gop" to "uga", although it will remain unused
for the time being.
This pertains exclusively to the set/restore functionality that we offer,
where any changes made by loader.conf previously will be effectively removed
upon reload of the configuration. We don't currently have a need to export
these, so don't bother.
Not all systems use efifb; pull hw.vga.textmode and choose a good console
mode instead if it's set to something non-zero. This is basically a revival
of the code that used to live in boot1, but instead rebased onto this
different way of doing mode selection in loader.efi.
Interestingly enough, the regression that was previously introduced where
GOP would not reflect the console setting does not seem to exist when
console mode selection is done here. I've not done any investigation as to
why this is the case. Nevertheless, boot1.efi is still not the best place to
do mode selection.
Default the max resolution to 1080p, we'll accept Width x Height
specifications along with the following presets:
- 480p
- 720p
- 1080p
- 2160p or 4k
- 5k
PR: 224825
Differential Revision: https://reviews.freebsd.org/D14801
I thought I tested this scenario, but clearly I failed to. =(
BIOS boots won't have efi-autoresizecons, so trying to use it as a forth
word fails during include. Use evaluate on "efi-autoresizecons" as a string
instead to move any potential errors to runtime- safely after we've already
checked that we're booting UEFI.
Pointy hat to: me
Reported by: cy
r331321 delegated autoresizing to an efi-autoresizecons command that
currently is expected to be done in forth/lua prior to drawing anything
useful.
Add the Forth version of the lua addition in r331321, hook efi.4th up to be
installed.
efiboot? was written by dteske@; anything outside of that may be blamed on
me.
boot1 is too early to be deciding a good resolution. Console modes don't map
cleanly/predictably to actual screen resolutions, and GOP does not reflect
the actual screen resolution after a console mode change. Rip it out.
Add an efi-autoresizecons command to loader to choose an optimal screen
resolution based on the current environment. We'll explicitly execute this
later, preferably before we draw anything of value but after we load config
and pick up any tunables we may need to decide where we're going.
This method also allows us to actually pass the correct framebuffer
information on to the kernel.
UGA autoresizing is not implemented because it doesn't have the kind of mode
enumeration that GOP does. If an interested person with relevant hardware
could get in contact, we can take a look at implementing UGA autoresize.
This effectively "fixes" the breakage caused by r327058, but doesn't
actually set the resolution correctly until the interpreter calls
efi-autoresizcons. The lualoader version of this has been included for
reference; the forth equivalent will follow.
Reviewed by: imp (with some hestitation), manu
Differential Revision: https://reviews.freebsd.org/D14788
In the original lualoader project, 'escapef' and 'escapeb' were chosen for
'escape fg' and 'escape bg'. We've carried on this naming convention, and as
our use of attributes grow the likeliness of 'escapeb'/'resetb' being
confused upon glance for 'escape bold'/'reset bold' increases.
Fix this by renaming these four functions to {escape,reset}{fg,bg} rather
than {escape,reset}{f,b} for clarity.
Reported by: dteske
See: comments in the hook module about intended usage, as well as the
introduced use for config.reloaded.
Use the newly introduced hook module to define a "config.reloaded" hook.
This is currently used to register core's clearKernelCache as a reload hook
to avoid a circular dependency and fix this functionality- it didn't
actually work out, and it isn't immediately obvious how it slipped into src.
Other hook types will be introduced into the core lualoader as useful hook
points are identified.
Previously, we sent a CSI 0m sequence to reset attributes, which also reset
the color scheme if the terminal defaults didn't match what we're expecting.
Go all-in and reset the color scheme, too, just in case.
Reported by: emaste
The former is fairly vague; these are FDT overlays to be applied to the
running system, so /boot/dtb is a sensible location to put it without
cluttering up /boot/dtb even further if desired.
The console may have been set for different colors before lualoader kicks
in; notably, a black-on-white color scheme is not necessarily what we're
expecting.
While here, make color.default() a composition of color.escape() instead of
rewriting the escape sequence to make it more obvious what it's achieving: a
white-on-black color scheme with no attributes set.
Reported by: emaste, whose eyes may rest easily
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
lualoader in itself only uses another ~200K, but there seems to be no reason
not to bump it a little higher to give us some more wiggle room.
With this, I can boot using a menu-enabled lualoader, no problem and
reasonably fast. Some heap usage datapoints from the review:
forthloader, no menus, kernel loaded:
heap base at 0x1203d5b0, top at 0x1208e000, used 330320
lualoader, no menus, kernel loaded:
heap base at 0x42050028, top at 0x420ab000, used 372696
lualoader, menus, kernel loaded:
heap base at 0x42050028, top at 0x420d5000, used 544728
Since then, the no menu case for lualoader should have decreased slightly as
I've made some changes to make sure that it no longer loads any of th emenu
bits with beastie disabled.
While here, split heap size out into a HEAP_SIZE macro.
Reviewed by: ian, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14471
This fixes a problem encountered on the Lenovo Thinkpad X220/Yoga 11e where
runtime services would try to inexplicably jump to other parts of memory
where it shouldn't be when attempting to enumerate EFI vars, causing a
panic.
The virtual mapping is enabled by default and can be disabled by setting
efi_disable_vmap in loader.conf(5).
Reviewed by: kib (earlier version)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14677
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.
For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.
All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.
open_disk uses d_opendata for it's own purpse. We can't store blkio
there. Fortunately, blkio is stored elsewhere and we never actually
retrieve blkio from d_opendata. Eliminate it as a source of confusion.
Eliminate all stores of d_opendata in efi since this layer doesn't own
that field.
Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.
This matches a convention that we use, at least in ubldr, to prefix
getc/putc with a loader-specific prefix to avoid collisions. This was
encountered while trying to build the beri loader with MK_LOADER_LUA=yes.
No objection from: brooks
Reported by: emaste
With autodetection turned on, hitting the filesystem everytime we need to
calculate choices for the kernel carousel is kind of slow. Cache once on the
first listing and reload it anytime the config is reloaded in case any of
the loader.conf(5) changes that affect this (kernel, kernels,
kernels_autodetect) have changed. This also picks up the case where we've
changed currdev and the autodetected kernels could change.
cli_execute was changed to return the status, cascade that to
cli_execute_unparsed.
This fixes a lot of false "Failed to execute" errors following r330620; no
failures actually occurred, but [module]_error would've then promptly
executed (and also "failed")
These tend to have less coverage in other places and they don't have
defaults as of yet, so mention them here:
- fdt_overlays
- kernels_autodetect (lualoader only)
This applies to:
- exec
- [module]_before
- [module]_error
- [module]_after
Before this commit, these used loader.perform to execute them as a pure,
unsalted loader command. This means that they were not able to take
advantage of any Lua-salted loader commands, like boot and autoboot, or pure
Lua loader commands (functions attached to the 'cli' module).
They now have access to the full arsenal, just shy of being able to execute
arbitrary Lua.
loader.interpret should not be used for executing loader commands from an
untrusted source (e.g. environment vars) as it will allow execution of
arbitrary Lua. Replace it with a call to the recently introduced
cli_execute_unparsed, which parses it out as a loader command and then
dispatches it as a loader command. This effectively filters out arbitrary
Lua.
This will be used for scenarios where the command to execute is coming in
via the environment (from, for example, loader.conf(5)) and is thus not
necessarily trusted.
cli_execute_unparsed will immediately be used for handling
module_{before,after,error} as well as menu_timeout_command. We still want
to offer these variables the ability to execute Lua-intercepted loader
commands, but we don't want them to be able to execute arbitrary Lua.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14580
testmain is a userland application intended to be built with standard
headers and whatnot, which we broke.
Fix it by having the testmain build clobber cflags, reducing it to just the
set of defines/includes it needs to build.
Discussed with: imp
MFC after: 3 days
Back when I "fixed" the loading of kernel/modules to be deferred until
booting, I inadvertently broke the ability to manually load a set of kernels
and modules in case of something bad having happened. lualoader would
instead happily load whatever is specified in loader.conf(5) and go about
the boot, leading to a panic loop as you try to rediscover a way to stop the
panicky efirt module from loading and fail miserably.
Reported by: me, sadly
than a pointer to Open Firmware by default. This eliminates a number of
potentially unsafe calls to firmware from the kernel and provides better
performance.
This feature is meant to be expanded until it is on by default
unconditionally and, ideally, we can then garbage-collect the
nightmare pile of hacks required to call into Open Firmware from a live
kernel.
Reviewed by: jhibbits
loader.command(...) will return whatever the executed function returns, so
follow suit and return whatever loader.command() returned or whatever the
Lua function returns.
the powerpc/ subdirectory. These have never used by SPARC and we have
no other (and almost certainly will have no other) Open Firmware platforms.
This makes the directory structure simpler and lets us avoid some
cargo-cult MI patterns on code that is, and always was,
architecture-specific.
- All of our default positions were offset from forth
- Our menu frame size was smaller than in forth
- Logo/brand drawing had an off-by-one, drawing one column lower on the
screen than they should have been.
- While here, switch a print() to printc() as it's expected that logos may
contain color and other escpae sequences that we'll need to honor.
It may be set to "left" or "right" -- any other value will cause the title
to be centered.
I've chosen to position these things just inside the vertical borders,
rather than overlapping the corners. This is an arbitrary choice and easily
amendable if this looks terrible.
This allows lua to pass back a command string to be executed as if it were
typed at the loader prompt- loader tries to execute the string first as pure
lua, then parses it and gives lua a chance to intercept before it tries to
execute it itself.
This will be used to implement menu_timeout_command, among other things,
which *should* be used to execute basic loader commands independent of the
chosen interpreter.
Rather than before the menu is drawn. The drawer is going to reset the
crusor position as soon as it draws anything anyways, so doing it before
serves no purpose. Setting it after is needed so we don't clobber the menu
when we start booting.
printc does not need the features or the overhead of printf. It does not
take formatting strings, and it pipes the single string argument through an
"%s" format.
Instead, use putc directly. This pipes the string through in its entirety as
a series of 'unsigned char's, generally straight to the console emulator.
Discussed with: tsoome
r330282 registered loader.printc as printc, so use it instead. This makes
sense for a couple reasons, the major point being that it reads a little bit
easier and pairs nicely with the global 'print'.
Similar cases can not really be made for other loader.* functions as most of
them are either highly specific to our use-case or usually available in
other modules, such as `os`. printc does not have a standard implementation
in the Lua world(*), so we have a little more leeway with it, and it's kind
of a special case of the globally available 'print'.
(*) I've been in the Lua world for all of two weeks, so this could be wrong.
- Add drawer.frame_styles to map out the kinds of characters we need for the
different loader_menu_frame values
- Respect loader_menu_frame, default to double[*]
- (imp) Use loader.printc instead of print- print adds a newline to the
output, which is not the right thing we want to be doing.
- (imp) Draw horizontal frames a little more efficiently- setting the cursor
after every line segment is horribly inefficient, especially on serial
consoles. Halve the number of characters written at the expense of an
additional loop to draw the bottom frame, which is likely more efficient
in the long run for some of less ideal scenarios.
[*] menu.4th(8) claims that the default here was single, but unset
loader_menu_frame yielded double and we didn't have any overrides in the
default loader.conf(5), so double it is.
Distribution will be done after all of the lualoader manpages are created.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D14480
Distribution will be done after all of the lualoader manpages are created.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D14479
to fix the memory leak that I introduced in r328426. Instead of
trying to clear up the possible memory leak in all the clients, I
ensure that it gets cleaned up in the source (e.g., ffs_sbget ensures
that memory is always freed if it returns an error).
The original change in r328426 was a bit sparse in its description.
So I am expanding on its description here (thanks cem@ and rgrimes@
for your encouragement for my longer commit messages).
In preparation for adding check hashing to superblocks, r328426 is
a refactoring of the code to get the reading/writing of the superblock
into one place. Unlike the cylinder group reading/writing which
ends up in two places (ffs_getcg/ffs_geom_strategy in the kernel
and cgget/cgput in libufs), I have the core superblock functions
just in the kernel (ffs_sbfetch/ffs_sbput in ffs_subr.c which is
already imported into utilities like fsck_ffs as well as libufs to
implement sbget/sbput). The ffs_sbfetch and ffs_sbput functions
take a function pointer to do the actual I/O for which there are
four variants:
ffs_use_bread / ffs_use_bwrite for the in-kernel filesystem
g_use_g_read_data / g_use_g_write_data for kernel geom clients
ufs_use_sa_read for the standalone code (stand/libsa/ufs.c
but not stand/libsa/ufsread.c which is size constrained)
use_pread / use_pwrite for libufs
Uses of these interfaces are in the UFS filesystem, geoms journal &
label, libsa changes, and libufs. They also permeate out into the
filesystem utilities fsck_ffs, newfs, growfs, clri, dump, quotacheck,
fsirand, fstyp, and quot. Some of these utilities should probably be
converted to directly use libufs (like dumpfs was for example), but
there does not seem to be much win in doing so.
Tested by: Peter Holm (pho@)
One does not simply convert to SUBDIR.yes in stand without making everything
else in the affected files SUBDIR.yes -- there are better ways to do this.
Use SUBDIR.${MK_*} where appropriate. r330248 eliminated most of the
offenders, sweep the rest under the rug.
Differential Revision: https://reviews.freebsd.org/D14545
Makefile.${MACHINE_ARCH} and remove the now-empty files. Generate the
*32 directories on the necessary architectures (well, currently only
amd64) on the fly. Remove LOADER_EFI variable and co-locate it with
EFI.
Differential Review: https://reviews.freebsd.org/D14546
Rather than hardcoding these things. This could lead to some form of loader
localization later, but the main goal at the moment is to get a clear view
of the strings we're outputting and strive to use more string.format() and
less wild concatenation all over the place.
We've included an extra '0' in there (which might get removed later, but
it's maintained for the moment for legacy purposes) which oftentimes
indicate that the following number should be treated as octal. This is not
the case, so note that to prevent future confusion (of myself and others).
