goes to zero. E.g., the vnode might be only shared-locked at the time of
vput() call. Such vnodes are kept in the hash, so they can be found later.
If ffs_valloc() allocated an inode that has its vnode cached in hash, and
still owing the inactivation, then vget() call from ffs_valloc() clears
VI_OWEINACT, and then the vnode is reused for the newly allocated inode.
The problem is, the vnode is not reclaimed before it is put to the new
use. ffs_valloc() recycles vnode vm object, but this is not enough.
In particular, at least v_vflag should be cleared, and several bits of
UFS state need to be removed.
It is very inconvenient to call vgone() at this point. Instead, move
some parts of ufs_reclaim() into helper function ufs_prepare_reclaim(),
and call the helper from VOP_RECLAIM and ffs_valloc().
Reviewed by: mckusick
Tested by: pho
MFC after: 3 weeks
bytes. Remove bogus assertion and while here remove another too obvious
assertion.
Reported by: Fabian Keil <freebsd-listen@fabiankeil.de>
MFC after: 2 weeks
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).
ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
Hold the vnode around the region where object lock is dropped, until
vnode lock is acquired.
Do not drop the vnode reference for a case when the object was
deallocated during unlock. Note that in this case, VV_TEXT is cleared
by vnode_pager_dealloc().
Reported and tested by: pho
Reviewed by: alc
MFC after: 3 days
the mutexes in the wrong order for the case where the
MBF_MNTLSTLOCK is set. I believe this did have the
potential for deadlock. For example, if multiple nfsd threads
called vfs_busyfs(), which calls vfs_busy() with MBF_MNTLSTLOCK.
Thanks go to pho for catching this during his testing.
Tested by: pho
Submitted by: kib
MFC after: 2 weeks
spurious (and fatal) interrupt errors.
One user reported seeing this:
Apr 22 18:04:24 ceres kernel: ar5416GetPendingInterrupts: fatal error,
ISR_RAC 0x0 SYNC_CAUSE 0x2000
SYNC_CAUSE of 0x2000 is AR_INTR_SYNC_LOCAL_TIMEOUT which is a bus timeout;
this shouldn't cause HAL_INT_FATAL to be set.
After checking out ath9k, ath9k_ar9002_hw_get_isr() clears (*masked)
before continuing, regardless of whether any bits in the ISR registers
are set. So if AR_INTR_SYNC_CAUSE is set to something that isn't
treated as fatal, and AR_ISR isn't read or is read and is 0, then
(*masked) wouldn't be cleared. Thus any of the existing bits set
that were passed in would be preserved in the output.
The caller in if_ath - ath_intr() - wasn't setting the masked value
to 0 before calling ath_hal_getisr(), so anything that was present
in that uninitialised variable would be preserved in the case above
of AR_ISR=0, AR_INTR_SYNC_CAUSE != 0; and if the HAL_INT_FATAL bit
was set, a fatal condition would be interpreted and the chip was
reset.
This patch does the following:
* ath_intr() - set masked to 0 before calling ath_hal_getisr();
* ar5416GetPendingInterrupts() - clear (*masked) before processing
continues; so if the interrupt source is AR_INTR_SYNC_CAUSE
and it isn't fatal, the hardware isn't reset via returning
HAL_INT_FATAL.
This doesn't fix any underlying errors which trigger
AR_INTR_SYNC_LOCAL_TIMEOUT - which is a bus timeout of some
sort - so that likely should be further investigated.
r216801
- cosmetic changes and style fixes
- Trick GAS/GCC into compiling access to TICK/(S)TICK_COMPARE independently
of the selected instruction set. Moreover, sun4v doesn't need the WAR for
BlackBird CPUs.
- Rename the "xor" parameter to "xorval" as the former is a reserved keyword
in C++.
vfs_sanitizeopts() can handle "ro" and "rw" options properly, there is
no more need to add "noro" in vfs_donmount() to cancel "ro".
This also fixes a problem of canceling options beginning with "no".
For example, "noatime" didn't cancel "nonoatime". Thus it was possible
that both "noatime" and "nonoatime" were active at the same time.
Reviewed by: bde
- Centralize PCI resource allocation/release.
- Enable flowid (TSS) support.
- Added "per-fastpath" locks and watchdog timeouts.
- Fixed problem where the CQ producer index was advanced beyond
the size of the CQ ring during initialization.
- Replaced hard-coded debug levels in some debug print statements.
- More style(9) fixes.
MFC after: Two weeks
r220375 all drivers enabled in the sparc64 GENERIC should be either
correctly using bus_dmamap_sync(9) calls or supply BUS_DMA_COHERENT
when appropriate or as a workaround for missing bus_dmamap_sync(9)
calls (sound(4) drivers and partially sym(4)). In at least some
configurations taking advantage of the streaming cache results in
a modest performance improvement.
- Remove the memory barrier for BUS_DMASYNC_PREREAD which as the
comment already suggested is bogus.
- Add my copyright for having implemented several things like support
for the Fire and Oberon IOMMUs, taking over PROM IOMMU mappings etc.
should respond with all zeroes to any access to slave registers. Test with
PATA devices confirmed such behavior. Unluckily, Intel SATA controllers in
legacy emulation mode behave differently, not making any difference between
ATA and ATAPI devices. It causes false positive slave device detection and,
as result, command timeouts.
To workaround this problem, mask result of legacy-emulated soft-reset with
the device presence information received from the SATA-specific registers.
nm_maxfilesize. This value rarely, if ever, changes
and the nm_mtx mutex is locked/unlocked earlier in
the function, which should be sufficient to avoid
getting a stale cached value for it. There is a
discussion w.r.t. what these tests should be, but
I've left them basically the same as the regular
NFS client for now.
Suggested by: pjd
MFC after: 2 weeks
- TCO_MESSAGEx: TCO specific regs providing the ability to monitor BIOS
bootup activity.
- TCO_NEWCENTURY: reporting RTC year roll over.
- TCO_NMI2SMI_EN, TCO_NMI_NOW: controlling SMIs conversion to NMIs and
NMI trigger.
- SMI_GBL_EN: Enabling SMI delivery for all the northbridge controller.
MFC after: 10 days
allocate all of them at attach time. This allows to avoid moving
keys around in the most-recently-used queue and needs no mutex
synchronization nor refcounting.
MFC after: 2 weeks
create reasonably large cache for the keys that is filled when
needed. The previous version was problematic for very large providers
(hundreds of terabytes or serval petabytes). Every terabyte of data
needs around 256kB for keys. Make the default cache limit big enough
to fit all the keys needed for 4TB providers, which will eat at most
1MB of memory.
MFC after: 2 weeks
This improves hard-reset and hot-plug on these ports.
- Device with ID 0x29218086 is a 2-port variant of ICH9 in legacy mode.
Skip probing for nonexistent slave devices there.
It allows to avoid false positive device detection under Xen, that caused
long probe delays due to subsequent IDENTIFY command timeouts.
MFC after: 1 month
This is destined to be a lightweight and optional set of ALQ
probes for debugging events which are just impossible to debug
with printf/log (eg packet TX/RX handling; AMPDU handling.)
The probes and operations themselves will appear in subsequent
commits.
so that it won't try and use vp->v_mount to do an RPC during
a forced dismount. There needs to be at least one more kernel
commit, plus a change to the umount(8) command before forced
dismounts will work for the experimental NFS client.
MFC after: 2 weeks
that could have allowed the hardware pidx to reach the cidx even though
the freelist isn't empty. (Haven't actually seen this but it was there
waiting to happen..)
MFC after: 1 week
