Rename vt_generate_vga_palette() to vt_generate_cons_palette() and
change it to build a palette where the color index is the same than in
terminal escape codes, not the VGA index. That's what TCHAR_CREATE()
uses and passes to vt(4).
The main differences between both orders are:
o Blue and red are swapped (1 <-> 4)
o Yellow and cyan are swapped (3 <-> 6)
The problem remained unnoticed, because the RGB bit indexes passed to
vt_generate_vga_palette() were reversed. This inversion was cancelled
by the colors inversions in the generated palette. For instance, red
(0xff0000) and blue (0x0000ff) have bytes in opposite order, but were
swapped in the palette. But after changing the value of blue (see last
paragraph), the modified color was in fact the red one.
This commit includes a fix to creator_vt.c, submitted by Nathan
Whitehorn: fb_cmsize is set to 16. Before this, the generated palette
would be overwritte. This fixes colors on sparc64 with a Creator3D
adapter.
While here, tune the palette to better match console colors and improve
the readability (especially the dark blue).
Submitted by: nwhitehorn (fix to creator_vt.c)
MFC after: 1 week
pmap, unlike i386, and similar to i386/xen pv, does not tolerate
abandoned mappings for the freed pages.
Reported and tested by: dumbbell
Diagnosed and reviewed by: alc
Sponsored by: The FreeBSD Foundation
In several functions, vtbuf_putchar() in particular, the lock on vtbuf
is acquired twice:
1. once by the said functions;
2. once in vtbuf_dirty().
Now, vtbuf_dirty_locked() and vtbuf_dirty_cell_locked() allow to
acquire that lock only once.
This improves the input speed of vt(4). To measure the gain, a
50,000-lines file was displayed on the console using cat(1). The time
taken by cat(1) is reported below:
o On amd64, with vt_vga:
- before: 1.0"
- after: 0.5"
o On sparc64, with creator_vt:
- before: 13.6"
- after: 10.5"
MFC after: 1 week
vt_fb_attach() currently always returns 0, but it could return a code
defined in errno.h. However, it doesn't return a CN_* code. So checking
its return value against CN_DEAD (which is 0) is incorrect, and in this
case, a success becomes a failure.
The consequence was unimportant, because the caller (drm_fb_helper.c)
would only log an error message in this case. The console would still
work.
Approved by: nwhitehorn
The original commit was supposed to stop the ability to do raw frame
injection in monitor mode to arbitrary channels (whether supported
by regulatory or not) however it doesn't seem to have been followed
by any useful way of doing it.
Apparently AHDEMO is supposed to be that way, but it seems to require
too much fiddly things (disable scanning, set a garbage SSID, etc)
for it to actually be useful for spoofing things.
So for now let's just disable it and instead look to filter transmit
in the output path if the channel isn't allowed by regulatory.
That way monitor RX works fine but TX will be blocked.
I don't plan on MFC'ing this to -10 until the regulatory enforcement
bits are written.
The AR9380 and later chips have a 128KiB register window, so the register
read diag api needs changing.
The tools are about to be updated as well. No, they're not backwards
compatible.
If powersave is enabled and there are any transitions to network
or full sleep - even if they're pretty damned brief - eventually
something messes up somewhere and the bus glue between the AR9331
SoC and the AR9331 wifi stops working. It shows up as stuck DMA
and LOCAL_TIMEOUT interrupts.
Both ath9k and the reference driver does a full chip reset if things
get stuck.
So:
* teach the AR9330 HAL about the force_full_reset option I added a
couple of years ago;
* if the chip is currently in full-sleep, do a full-reset;
* if TX DMA and/or RX DMA are still enabled (eg, they did get
stuck during reset) then do a full-reset.
Tested:
* AR9331 SoC, STA mode
pmap_enter(PMAP_ENTER_NOSLEEP). The PGA_WRITEABLE flag can be set
when either the page is busied, or the owner object is locked.
Update comments, move all assertions about page state when
PGA_WRITEABLE flag is set, into new helper
vm_page_assert_pga_writeable().
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
nullfs vnode shares vnode lock with lower vnode, this allows the
reclamation of nullfs directory vnode in null_lookup(). In this
situation, VOP must return ENOENT.
More, since after the reclamation, the locks of nullfs directory vnode
and lower vnode are no longer shared, the relock of the ldvp does not
restore the correct locking state of dvp, and leaks ldvp lock.
Correct this by unlocking ldvp and locking dvp.
Use cached value of dvp->v_mount.
Reported by: bdrewery
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Add the ACPI MCFG table to advertise the extended config memory window.
Introduce a new flag MEM_F_IMMUTABLE for memory ranges that cannot be deleted
or moved in the guest's address space. The PCI extended config space is an
example of an immutable memory range.
Add emulation for the "movzw" instruction. This instruction is used by FreeBSD
to read a 16-bit extended config space register.
CR: https://phabric.freebsd.org/D505
Reviewed by: jhb, grehan
Requested by: tychon
After r269510 the IO APIC and ATPIC initialization is done at the same
order, which means atpic_init can be called before the IO APIC has
been initalized. In that case the ATPIC will take over the interrupt
sources, preventing the IO APIC from registering them.
Reported by: David Wolfskill <david@catwhisker.org>
Tested by: David Wolfskill <david@catwhisker.org>,
Trond Endrestøl <Trond.Endrestol@fagskolen.gjovik.no>
Sponsored by: Citrix Systems R&D
have to adjust freeblk records to reflect the change to a full-size block.
For example, suppose we have a block made up of fragments 8-15 and
want to free its last two fragments. We are given a request that says:
FREEBLK ino=5, blkno=14, lbn=0, frags=2, oldfrags=0
where frags are the number of fragments to free and oldfrags are the
number of fragments to keep. To block align it, we have to change it to
have a valid full-size blkno, so it becomes:
FREEBLK ino=5, blkno=8, lbn=0, frags=2, oldfrags=6
Submitted by: Mikihito Takehara
Tested by: Mikihito Takehara
Reviewed by: Jeff Roberson
MFC after: 1 week
One problem is inferior(9) looping due to the process tree becoming a
graph instead of tree if the parent is traced by child. Another issue
is due to the use of p_oppid to restore the original parent/child
relationship, because real parent could already exited and its pid
reused (noted by mjg).
Add the function proc_realparent(9), which calculates the parent for
given process. It uses the flag P_TREE_FIRST_ORPHAN to detect the head
element of the p_orphan list and than stepping back to its container
to find the parent process. If the parent has already exited, the
init(8) is returned.
Move the P_ORPHAN and the new helper flag from the p_flag* to new
p_treeflag field of struct proc, which is protected by proctree lock
instead of proc lock, since the orphans relationship is managed under
the proctree_lock already.
The remaining uses of p_oppid in ptrace(PT_DETACH) and process
reapping are replaced by proc_realparent(9).
Phabric: D417
Reviewed by: jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
