Commit Graph

23 Commits

Author SHA1 Message Date
obrien
c63dab466c Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
imp
18625a197e Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:39:05 +00:00
imp
e9df6b7a14 All current uses of pci_set_powerstate are bogus, at least in theory.
However, they are presently necessary due to bigger bogusness in the
pci bus layer not doing the right thing on suspend/resume or on
initial device probe.  This is exactly the sort of thing that the
BURN_BRIDGES option was invented for.  Mark all of them as
BURN_BRIDGES.  As soon as I have the powerstate stuff properly
integrated into the pci bus code, I intend to remove all these
workarounds.
2003-07-03 14:00:57 +00:00
mdodd
74c95b7f29 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
mdodd
261178d14f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
obrien
96d4258af9 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
sam
14c32b5f40 network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
phk
1dfc2c167f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
alfred
81061e6edf Cleanup after my de-__P (remove leading whitespace before prototype args).
Add newlines after function return types in function declarations.

Approved by: wpaul (a long time ago)
2002-07-06 16:34:32 +00:00
alfred
69f74d0dfa catch up with ext_free prototype change. 2002-06-29 01:36:59 +00:00
phk
e67296b3b0 Follow NetBSD and s/IFM_1000_TX/IFM_1000_T/ 2002-04-28 20:34:20 +00:00
alfred
3264aec746 Remove __P. 2002-03-20 02:08:01 +00:00
jlemon
34552656b5 Do not call mii_polltick() immediately after mii_tick().
Poiinted out by: wpaul
2001-09-29 19:31:29 +00:00
jlemon
f00876504b Have the driver announce its rxcsum capabilities. 2001-09-18 20:19:28 +00:00
wpaul
ed90ce83ec Apply patch supplied by Jonathan Chen: use the correct arguments to
pci_enable_io(). We need to use SYS_RES_IOPORT/SYS_RES_MEMORY instead
of PCIM_CMD_PORTEN/PCIM_CMD_MEMEN.
2001-07-09 17:58:42 +00:00
bmilekic
70d52016a3 Change m_devget()'s outdated and unused `offset' argument to actually mean
something: offset into the first mbuf of the target chain before copying
the source data over.

Make drivers using m_devget() with a first argument "data - ETHER_ALIGN"
to use the offset argument to pass ETHER_ALIGN in. The way it was previously
done is potentially dangerous if the source data was at the top of a page
and the offset caused the previous page to be copied (if the
previous page has not yet been appropriately mapped).

The old `offset' argument in m_devget() is not used anywhere (it's always
0) and dates back to ~1995 (and earlier?) when support for ethernet trailers
existed. With that support gone, it was merely collecting dust.

Tested on alpha by: jlemon
Partially submitted by: jlemon
Reviewed by: jlemon
MFC after: 3 weeks
2001-06-20 19:48:35 +00:00
wpaul
00f007fade Fix some memory bugs with regard to jumbo buffers. I made a mistake when
converting from the old external mbuf buffer code to the new (with the
MEXTADD() macro). Also free free list memory correctly in
foo_free_jumbo_mem() routines: grab the head of the list, then
remove it, _then_ free() it.

This fixes the memory corruption problem I've been chasing in the level 1
driver.
2001-06-18 22:04:40 +00:00
wpaul
89fb81a8c4 Turn TCP and UDP hardware RX checksumming back on. jlemon pointed out where
I'd gone wrong before: we have to set csum_data to 0xffff, not 0.
2001-06-15 19:02:55 +00:00
wpaul
1f51867466 Use LGE_INC() macro to increment tx producer index in lge_encap().
Disable the extra TCP/UCP checksum checking in lge_rxeof() since it
doesn't appear to actually work as advertised.
2001-06-06 19:16:02 +00:00
wpaul
5b01407669 In lge_detach(), don't contigfree() the jumbogram buffer memory;
lge_free_jumbo_mem() does it for us.
2001-06-05 23:16:52 +00:00
wpaul
66a9685e9f Add device driver support for the Level 1 LXT1001 NetCellerator
gigabit ethernet controller chip. This device is used on some
fiber optic gigE cards from SMC, D-Link and Addtron. Jumbograms and
TCP/IP checksum offload on receive are supported. Hardware VLAN
filtering is not, because it doesn't play well with our existing
VLAN code. Also add manual page.

There is a 4.x version of this driver available at
http://www.freebsd.org/~wpaul/Level1/4.x if anyone feels adventurous
and wants to test it. I still need to do performance testing and
tuning with this device.

(For my next trick, I will make the 3Com 3cR990 sit up and beg.)
2001-05-31 21:44:26 +00:00