Commit Graph

75 Commits

Author SHA1 Message Date
imp
fdead95125 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:20:27 +00:00
imp
b317207ba0 Due to extreme bogusness in the pci bus layer, these drivers were
forced to do slightly bogus power state manipulation.  However, this
is one of those features that is preventing further progress, so mark
them as BURN_BIRDGES like I did for the drivers in sys/dev/...

This, like the other change, are a no-op unless you have BURN_BRIDGES
in your kernel.
2003-07-03 21:39:53 +00:00
imp
55161dbc66 Use newly minted device_is_attached rather than device_is_alive to see
if attach succeeded.  device_is_alive just tells us that probe
succeeded.  Since we were using it to do things like detach net
interfaces, this caused problems when there were errors in the attach
routine.

Symptoms of problem reported by: martin blapp
2003-04-21 18:34:04 +00:00
njl
fe07eb9dfb Revise attach/detach resource cleanup
- Unconditionally call *_stop() if device is in the tree. This is to
  prevent callouts from happening after the device is gone. Checks for
  bus_child_present() should be added in the future to keep from touching
  potentially non-existent hardware in *_detach().  Found by iedowse@.
- Always check for and free miibus children, even if the device is not in
  the tree since some failure cases could have gotten here.
- Call ether_ifdetach() in the irq setup failure case
- ti(4), xl(4): move ifmedia_init() calls to the beginning of attach so
  that ifmedia_removeall() can be unconditionally called on detach. There
  is no way to detect whether ifmedia has been initialized without using
  a separate variable (as tl(4) does).
- Add comments to indicate assumptions of code path
2003-04-17 20:32:06 +00:00
mdodd
74c95b7f29 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
mdodd
261178d14f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
silby
979ed3a82e Fix if_vr's handling of vr_encap failures. 3 parts:
- Don't bother setting OACTIVE when the descriptors are all full
  or there's a vr_encap failure, it doesn't help anything.
- Correctly roll back on the descriptor list after a failure
  so as not to corrupt the list.
- Add a missing VR_UNLOCK().

Without these changes, vr_encap failure (which is assured during
a low mbuf situation) would result in the card locking until
the watchdog could fire.

MFC after:	1 week
2003-04-09 02:21:54 +00:00
obrien
96d4258af9 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
jhb
35e71f4a05 Add missing ()'s so that these drivers all compile again.
Noticed by:	jake
Tested on:	i386 (compile)
2003-03-31 20:22:00 +00:00
njl
c112976199 Clean up locking and resource management for pci/if_*
- Remove locking of the softc in the attach method, instead depending on
  bus_setup_intr being at the end of attach (delaying interrupt enable until
  after ether_ifattach is called)
- Call *_detach directly in the error case of attach, depending on checking
  in detach to only free resources that were allocated.  This puts all
  resource freeing in one place, avoiding thinkos that lead to memory leaks.
- Add bus_child_present check to calls to *_stop in the detach method to
  be sure hw is present before touching its registers.
- Remove bzero softc calls since device_t should do this for us.
- dc: move interrupt allocation back where it was before.  It was unnecessary
  to move it.  This reverts part of 1.88
- rl: move irq allocation before ether_ifattach.  Problems might have been
  caused by allocating the irq after enabling interrupts on the card.
- rl: call rl_stop before ether_ifdetach
- sf: call sf_stop before ether_ifdetach
- sis: add missed free of sis_tag
- sis: check errors from tag creation
- sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- sk: remove duplicate initialization of sk_dev
- ste: add missed bus_generic_detach
- ti: call ti_stop before ether_ifdetach
- ti: add missed error setting in ti_rdata alloc failure
- vr: add missed error setting in I/O, memory mapping cases
- xl: add missed error setting in I/O, memory mapping cases
- xl: remove multi-level goto on attach failure
- xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- Calls to free(9) are unconditional because it is valid to call free with a
  null pointer.

Reviewed by:	imp, mdodd
2003-03-31 17:29:43 +00:00
silby
f932a709c1 Switch vr_encap over to using m_defrag instead of its own version
of the function.

No functional change, this driver already handled long mbuf chains
correctly.

MFC after:	2 weeks
2003-03-29 21:39:49 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
silby
af3bd9355b Add deviceids for 6105 and 6105M chips. Further changes will be necessary
to fully support these new chips, but preliminary evidence suggests that
they work acceptable with our present driver.

MFC after:	1 week
2003-02-01 01:27:05 +00:00
silby
e8e9b02202 Switch the if_vr driver from using our generic MII routines over to
using the Rhine's internal shift registers which are designed
for the job.  This reduces the amount of time we wait around shifting
bits, and seems to work better with some chips.

Also, provide a workaround for some newer cards which report fake PHYs
at multiple addresses.  (As more cards are ID'd, I'm sure this part
of the code will have to be expanded to cover more cases.)

Submitted by:	Thomas Nystrom <thn@saeab.se>
MFC after:	1 week
2003-02-01 01:18:26 +00:00
silby
208fd61178 Fixes from Thomas Nystrom to fix hanging problems experienced by vr cards
under load.

This patch has been tested by Thomas and other for more than a month now,
and all (known) hangs seem to be solved.

Thomas's explanation of the patch:

*  Fix the problem with the printing of the RX-error.

*  Code from if_fet do better deal with the RX-recovery including a
   timeout of the RX-turnoff.

*  The call to vr_rxeof before vr_rxeoc have been moved to a point
   where the RX-part of the chip is turned off. Otherwise there is a
   window where new data could have been written to the buffer chain
   before the RX-part is turned off. If this happens the chip will see
   a busy rx-buffer. I have no evidence that this have occured but
   god knows what the chip will do in this case!

*  I have added a timeout of the TX-turnoff. I have checked and in
   my 900 MHz system the flags for turnoff (both RX & TX) is seen at
   the first check in the loop.

*  I could see that I got the VR_ISR_DROPPED interrupt sometimes and
   started to thinking about this. I then realized that no recovery is
   needed for this case and therefore I only count it as an rxerror
   (which was not done before).

*  Finally I have changed the FIFO RX threshhold to 128 bytes. When I
   did this the VR_ISR_DROPPED interrupt went away. Theory: The chip
   will receive a complete frame before it tries to write it out to
   memory then the RX threshold is set to store'n'forward. IF the frame
   is large AND the next rx frame also is large AND the bus is busy
   transfering a TX frame to the TX fifo THEN the second received
   frame wont fit in the FIFO and is then dropped. By having the RX
   threshold set to 128 the RX fifo is emptied faster.

MFC after:	5 days
2003-01-31 07:37:06 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
mbr
9f1243940b When reading PHY regs over the i2c bus, the turnaround ACK bit
is read one clock edge too late. This bit is driven low by
slave (as any other input data bits from slave) when the clock
is LOW. The current code did read the bit after the clock was
driven high again.

Reviewed by:	luoqi
MFC after:	2 weeks
2003-01-10 08:09:58 +00:00
silby
fdb6662bf8 Import some relevant changes from Via's if_fet driver:
1.  Detect the revision of the Rhine chip we're using.
2.  Use the force reset command on revisions which support
    it whenever the normal reset command fails.

This should solve a wide range of "my vr0 locks up with reset
failed messages" problems.  (Although the root causes should
be eventually tracked down.)

Tested by:	grenville armitage <garmitage@swin.edu.au>
Obtained from:	Via's if_fet driver
MFC after:	3 days
Approved by:	re
2002-11-25 05:15:27 +00:00
sam
10eb947d27 o track either_ifattach/ether_ifdetach API changes
o use if_input for input packet processing
o don't strip the Ethernet header for input packets
o use BPF_* macros bpf tapping
o call ether_ioctl to handle default ioctl case
o track vlan changes

Reviewed by:	many
Approved by:	re
2002-11-14 23:49:09 +00:00
phk
32fb67c36b Be consistent about functions being static.
Properly put macro args in ().

Spotted by:	FlexeLint.
2002-10-16 09:14:59 +00:00
alfred
df2202b150 style: put return types on a line by themselves. 2002-08-24 00:02:03 +00:00
silby
e4af9029cc Improve handling of TX errors. Early reports indicate that this
elimiates the driver lockup problem reported by many.

Concepts used were taken from Via's if_fet driver.  Verification
and implementation were done by Thomas Nystrom.

Submitted by:	Thomas Nystrom <thn@saeab.se>
MFC after:	3 days
2002-08-15 04:04:53 +00:00
silby
739c46b18b Make sure to set the DMA transfer length register, plus one
small style fix.

Submitted by:	Thomas Nystrom <thn@saeab.se>
2002-08-05 13:24:06 +00:00
silby
317a440c31 Make sure to set both sets of registers which control the RX and TX buffer
sizes.  Previously, the end result was at the mercy of the card's default
setting.  This change will reduce the number of buffer underruns for
some users.

PR:		kern/37929
Submitted by:	Thomas Nystrom <thn@saeab.se>
MFC after:	7 days
2002-07-31 19:58:36 +00:00
silby
3d150d9681 Enhance the use of the watchdog timer in this driver so that it will
allow recovery from transmission lockups which occur in the middle
of the descriptor list, rather than just at the beginning.

For some unknown reason, Rhine II chips have a tendency to stop
transmitting while under heavy load, possibly due to collisions.
Whether this behavior is due to a hardware bug or a driver glitch
is unknown as of now.

In either case, this change allows the driver to gracefully recover
from such situations.

Special thanks go to The Anarcat <anarcat@anarcat.dyndns.org>, who
bugged me into looking at this and to
Dominic Marks <dominic_marks@btinternet.com>, who performed a great
deal of testing to help characterize this problem.

MFC after:	3 days
2002-05-15 17:05:28 +00:00
jhb
db9aa81e23 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
alfred
3264aec746 Remove __P. 2002-03-20 02:08:01 +00:00
luigi
bf2556cfad Remove printf's on mbuf/cluster allocation failures. There are now
equivalent and less dangerous (rate limited) messages in
the mbuf allocation code.

MFC after: 3 days
2001-12-14 05:56:35 +00:00
wpaul
ed90ce83ec Apply patch supplied by Jonathan Chen: use the correct arguments to
pci_enable_io(). We need to use SYS_RES_IOPORT/SYS_RES_MEMORY instead
of PCIM_CMD_PORTEN/PCIM_CMD_MEMEN.
2001-07-09 17:58:42 +00:00
bmilekic
70d52016a3 Change m_devget()'s outdated and unused `offset' argument to actually mean
something: offset into the first mbuf of the target chain before copying
the source data over.

Make drivers using m_devget() with a first argument "data - ETHER_ALIGN"
to use the offset argument to pass ETHER_ALIGN in. The way it was previously
done is potentially dangerous if the source data was at the top of a page
and the offset caused the previous page to be copied (if the
previous page has not yet been appropriately mapped).

The old `offset' argument in m_devget() is not used anywhere (it's always
0) and dates back to ~1995 (and earlier?) when support for ethernet trailers
existed. With that support gone, it was merely collecting dust.

Tested on alpha by: jlemon
Partially submitted by: jlemon
Reviewed by: jlemon
MFC after: 3 weeks
2001-06-20 19:48:35 +00:00
wpaul
cec00d2565 Close PR 22208: bring chip out of suspend mode, because Windows might
have put the chip to sleep at shutdown. This is really only for the
VT6102, but it doesn't hurt the older chips.
2001-05-14 19:13:02 +00:00
wpaul
98e6d79157 Remember to actually program the MAC address into the unicast filter
in vr_init(). The VIA Rhine chip happens to be able to automatically
read its station address from the EEPROM automatically when reset,
so you don't need to program the filter if you want to keep using the
factory default address, but if you want to change it with "ifconfig vr0
ether xx:xx:xx:xx:xx:xx" then we need to manually set it in the init
routine.
2001-03-07 18:52:22 +00:00
wpaul
d314c28e74 Big round of minor updates:
- Use pci_get_powerstate()/pci_set_powerstate() in all the other drivers
  that need them so we don't have to fiddle with the PCI power management
  registers directly.
- Use pci_enable_busmaster()/pci_enable_io() to turn on busmastering and
  PIO/memory mapped accesses.
- Add support to the RealTek driver for the D-Link DFE-530TX+ which has
  a RealTek 8139 with its own PCI ID. (Submitted by Jason Wright)
- Have the SiS 900/National DP83815 driver be sure to disable PME
  mode in sis_reset(). This apparently fixes a problem on some
  motherboards where the DP83815 chip fails to receive packets.
  (Submitted by Chuck McCrobie <mccrobie@cablespeed.com>)
2001-02-21 20:54:22 +00:00
bmilekic
f364d4ac36 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
phk
d214ae2171 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
phk
408a00d7df Use LIST_FOREACH() to traverse ifp->if_multiaddrs list, instead of
<sys/queue.h> implementation details.

Created with:   /usr/sbin/sed
Reviewed with:  /sbin/md5
2001-02-03 16:29:10 +00:00
wpaul
d5548d1daf Set the OACTIVE flag if vr_encap() fails. 2001-01-20 00:47:55 +00:00
wpaul
43abd651dd Bug fixes that I've put together while working on a project in the office:
if_vr: handle the case where vr_encap() returns failure: bust out of the
       packet sending loop instead of panicking. Also add some missing
       newlines to some printf()s.

if_dc: The miibus_read and miibus_write methods keep swapping in and
       out of MII mode by fiddling with CSR6 for cards with MII PHYs.
       This is a hack to support the original Macronix 98713 card which
       has built-in NWAY that uses an MII-like management interface
       even though it uses serial transceivers. Conditionalize this
       so that we only do this on 98713 chips, since it does bad things
       to genuine tulip chips (and maybe other clones).
2001-01-19 23:55:07 +00:00
bmilekic
37decc93f5 Implement MTX_RECURSE flag for mtx_init().
All calls to mtx_init() for mutexes that recurse must now include
the MTX_RECURSE bit in the flag argument variable. This change is in
preparation for an upcoming (further) mutex API cleanup.
The witness code will call panic() if a lock is found to recurse but
the MTX_RECURSE bit was not set during the lock's initialization.

The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to
MTX_RECURSED, which is more appropriate given its meaning.

The following locks have been made "recursive," thus far:
eventhandler, Giant, callout, sched_lock, possibly some others declared
in the architecture-specific code, all of the network card driver locks
in pci/, as well as some other locks in dev/ stuff that I've found to
be recursive.

Reviewed by: jhb
2001-01-19 01:59:14 +00:00
wpaul
9e208c7442 Initialize/grab the mutex earlier in the attach phase, so that
bailing out to the fail: label where we release/destroy the mutex
will work without exploding.
2000-12-04 22:46:50 +00:00
phk
beadbd4365 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
wpaul
8e0abe4cc4 Use device_get_nameunit(dev) as the mutex string when calling
mtx_init() instead of hard-coded string constant. Also remember to do
the mutex changes to the ste driver, which I forgot in the first commit.
2000-10-13 18:35:49 +00:00
wpaul
16ec4a91f1 First round of converting network drivers from spls to mutexes. This
takes care of all the 10/100 and gigE PCI drivers that I've done.
Next will be the wireless drivers, then the USB ones. I may pick up
some stragglers along the way. I'm sort of playing this by ear: if
anyone spots any places where I've screwed up horribly, please let me
know.
2000-10-13 17:54:19 +00:00
archie
7357df6b48 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
wpaul
8a5ba0ae5f Close PR# 19617: add support for VIA VT6102 NICs to VIA Rhine driver. 2000-07-05 21:37:21 +00:00
peter
be1e54079f Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/ 2000-05-28 16:13:43 +00:00
archie
fa21035b4e Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00
peter
3f3fb18f8e Depend on miibus.
Note that if_aue doesn't strictly depend on usb because it uses the
method interface for calls rather than using internal symbols, and
because it's a child driver of usb and therefore will not try and do
anything unless the parent usb code is loaded at some point.  if_aue does
strictly depend on miibus as it will fail to link if it is missing.
2000-04-29 13:41:57 +00:00
wpaul
a0c34c5a23 Change contigmalloc() lower memory bound from 1MB to 0 to improve
chances of allocations succeeding on systems with small amounts of
RAM.

Pointed out by: bde
1999-09-25 17:29:02 +00:00
wpaul
165d81879e As suggested by phk, unconditionalize BPF support in these drivers. Since
there are stubs compiled into the kernel if BPF support is not enabled,
there aren't any problems with unresolved symbols. The modules in /modules
are compiled with BPF support enabled anyway, so the most this will do is
bloat GENERIC a little.
1999-09-23 03:32:57 +00:00