cannot unilaterally pass data to a client it can reduce the physical
disk transaction overhead by reading larger blocks. This results in
better pipelining of requests/responses over the network and an almost
100% increase in cpu efficiency on the server. On a 100BaseTX network
NFS read performance increases from 8.5 MBytes/sec to 10 MB/sec (maxed
out), and cpu efficiency increases from 72% idle to 80% idle on the server.
Reviewed by: Alfred Perlstein <bright@wintelcom.net>
NFS packets, mainly initializing structure pointers to NULL which
are conditionally freed prior to return.
PR: kern/15249
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
blocks of zeros could wind up in a file written to over NFS by a client.
The problem only occurs a few times per several gigabytes of data. This
problem turned out to be bug #3 below.
bug #1:
B_CLUSTEROK must be cleared when an NFS buffer is reverted from
stage 2 (ready for commit rpc) to stage 1 (ready for write).
Reversions can occur when a dirty NFS buffer is redirtied with new
data.
Otherwise the VFS/BIO system may end up thinking that a stage 1
NFS buffer is clusterable. Stage 1 NFS buffers are not clusterable.
bug #2:
B_CLUSTEROK was inappropriately set for a 'short' NFS buffer (short
buffers only occur near the EOF of the file). Change to only set
when the buffer is a full biosize (usually 8K). This bug has no
effect but should be fixed in -current anyway. It need not be
backported.
bug #3:
B_NEEDCOMMIT was inappropriately set in nfs_flush() (which is
typically only called by the update daemon). nfs_flush()
does a multi-pass loop but due to the lack of vnode locking it
is possible for new buffers to be added to the dirtyblkhd list
while a flush operation is going on. This may result in nfs_flush()
setting B_NEEDCOMMIT on a buffer which has *NOT* yet gone through its
stage 1 write, causing only the commit rpc to be made and thus
causing the contents of the buffer to be thrown away (never sent to
the server).
The patch also contains some cleanup, which only applies to the commit
into -current.
Reviewed by: dg, julian
Originally Reported by: Dan Nelson <dnelson@emsphone.com>
* lockstatus() and VOP_ISLOCKED() gets a new process argument and a new
return value: LK_EXCLOTHER, when the lock is held exclusively by another
process.
* The ASSERT_VOP_(UN)LOCKED family is extended to use what this gives them
* Extend the vnode_if.src format to allow more exact specification than
locked/unlocked.
This commit should not do any semantic changes unless you are using
DEBUG_VFS_LOCKS.
Discussed with: grog, mch, peter, phk
Reviewed by: peter
a 0 error code. The problem occured with NFSv2 mounts and also with
any NFSv3 mount returning an EEXIST error (which is translated to 0
prior to return). The reply to the rpc only contains the file handle
for the no-error case under NFSv3. The error case under NFSv3 and
all cases under NFSv2 do *not* return the file handle. The fix is
to do a secondary lookup to obtain the file handle and thus be able
to generate a return vnode for the situations where the rpc reply
does not contain the required information.
The bug was originally introduced when VOP_SYMLINK semantics were
changed for -CURRENT. The NFS symlink implementation was not properly
modified to go along with the change despite the fact that three
people reviewed the code. It took four attempts to get the current
fix correct with five people. Is NFS obfuscated? Ha!
Reviewed by: Alfred Perlstein <bright@wintelcom.net>
Testing and Discussion: "Viren R.Shah" <viren@rstcorp.com>, Eivind Eklund <eivind@FreeBSD.ORG>, Ian Dowse <iedowse@maths.tcd.ie>
of element [4] in both, which goes beyond the end of the array, leaving
[0], [1], [2], and [3]. This bug did not cause any problems since
the overrun fields are initialized after the bogus array init but
needs to be fixed anyway.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
Note: Previous commit to these files (except coda_vnops and devfs_vnops)
that claimed to remove WILLRELE from VOP_RENAME actually removed it from
VOP_MKNOD.
when returning an error. Bug fix was extracted from the PR. The PR
is not yet entirely resolved by this commit.
PR: kern/13049
Reviewed by: Matt Dillon <dillon@freebsd.org>
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
Merge the contents (less some trivial bordering the silly comments)
of <vm/vm_prot.h> and <vm/vm_inherit.h> into <vm/vm.h>. This puts
the #defines for the vm_inherit_t and vm_prot_t types next to their
typedefs.
This paves the road for the commit to follow shortly: change
useracc() to use VM_PROT_{READ|WRITE} rather than B_{READ|WRITE}
as argument.
error for a directory. I have made this change after a great deal of
review although I cannot be absolutely sure that this meets the spec.
The issue devolves into whether changes in an underlying (UFS) directory
can cause NFS directory blocks to be renumbered. My read of the code
indicates that NFS directory blocks will not be renumbered, which means
that the cookies should still remain valid after a change is made to
the underlying directory. This being the case, a cookie error should
not be returned when a change is made to the underlying directory and,
instead, the NFS client should rely on mtime detection to invalidate and
reload the directory.
The use of mtime is problematic in of itself, due to insufficient
resolution, which is why I believe the original conservative error
handling was done. Still, there have been dozens of bug reports by
people needing solaris<->FreeBSD interoperability and these have to
be accomodated.
-----------------------------
The core of the signalling code has been rewritten to operate
on the new sigset_t. No methodological changes have been made.
Most references to a sigset_t object are through macros (see
signalvar.h) to create a level of abstraction and to provide
a basis for further improvements.
The NSIG constant has not been changed to reflect the maximum
number of signals possible. The reason is that it breaks
programs (especially shells) which assume that all signals
have a non-null name in sys_signame. See src/bin/sh/trap.c
for an example. Instead _SIG_MAXSIG has been introduced to
hold the maximum signal possible with the new sigset_t.
struct sigprop has been moved from signalvar.h to kern_sig.c
because a) it is only used there, and b) access must be done
though function sigprop(). The latter because the table doesn't
holds properties for all signals, but only for the first NSIG
signals.
signal.h has been reorganized to make reading easier and to
add the new and/or modified structures. The "old" structures
are moved to signalvar.h to prevent namespace polution.
Especially the coda filesystem suffers from the change, because
it contained lines like (p->p_sigmask == SIGIO), which is easy
to do for integral types, but not for compound types.
NOTE: kdump (and port linux_kdump) must be recompiled.
Thanks to Garrett Wollman and Daniel Eischen for pressing the
importance of changing sigreturn as well.
previously issued synchronously even if async daemons (nfsiod's) were
available. The commit has been moved from the strategy code to the doio
code in order to asynchronize it.
Removed use of lastr in preparation for removal of vnode->v_lastr. It
has been replaced with seqcount, which is already supported by the system
and, in fact, gives us a better heuristic for sequential detection then
lastr ever did.
Made major performance improvements to the server side commit. The
server previously fsync'd the entire file for each commit rpc. The
server now bawrite()s only those buffers related to the offset/size
specified in the commit rpc.
Note that we do not commit the meta-data yet. This works still needs
to be done.
Note that a further optimization can be done (and has not yet been done)
on the client: we can merge multiple potential commit rpc's into a
single rpc with a greater file offset/size range and greatly reduce
rpc traffic.
Reviewed by: Alan Cox <alc@cs.rice.edu>, David Greenman <dg@root.com>
reasonable defaults.
This avoids confusing and ugly casting to eopnotsupp or making dummy functions.
Bogus casting of filesystem sysctls to eopnotsupp() have been removed.
This should make *_vfsops.c more readable and reduce bloat.
Reviewed by: msmith, eivind
Approved by: phk
Tested by: Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>
Make the alias list a SLIST.
Drop the "fast recycling" optimization of vnodes (including
the returning of a prexisting but stale vnode from checkalias).
It doesn't buy us anything now that we don't hardlimit
vnodes anymore.
Rename checkalias2() and checkalias() to addalias() and
addaliasu() - which takes dev_t and udev_t arg respectively.
Make the revoke syscalls use vcount() instead of VALIASED.
Remove VALIASED flag, we don't need it now and it is faster
to traverse the much shorter lists than to maintain the
flag.
vfs_mountedon() can check the dev_t directly, all the vnodes
point to the same one.
Print the devicename in specfs/vprint().
Remove a couple of stale LFS vnode flags.
Remove unimplemented/unused LK_DRAINED;
works correctly in if/else etc. egcs had probably picked up most of the
problems here before with "ambiguous braces" etc, but this should
increase the robustness a bit. Based on an idea from Eivind Eklund.
correct the pointers afterwards.
It's kinda bogus that we generate a 24 (?) byte filehandle (2 x int32
fsid and 16 byte VFS fhandle) and pad it out to 64 bytes for NFSv3 with
garbage. The whole point of NFSv3's variable filehandle length was
to allow for shorter handles, both in memory and over the wire. I plan
on taking a shot at fixing this shortly.
I did some tcpdumping the other day and noticed that GETATTR calls
were frequently followed by an ACCESS call to the same file. The
attached patch changes nfs_getattr to fill the access cache as a side
effect. This is accomplished by calling ACCESS rather than
GETATTR. This implies a modest overhead of 4 bytes in the request and
8 bytes in the response compared to doing a vanilla GETATTR.
...
[The patch comprises two parts] The first
is the "real" patch, the second counts misses and hits rather than
fills and hits. The difference is subtle but important because both
nfs_getattr and nfs_access now fill the cache. It also changes the
default value of nfsaccess_cache_timeout to better match the attribute
cache. IMHO, file timestamps change much more frequently than
protection bits.
Submitted by: Bjoern Groenvall <bg@sics.se>
Reviewed by: dillon (partially)
vnodes are locked and never unlocked, which leads to processes starting
to wedge up after doing a mount -o nfsv3,tcp,rdirplus foo:/fs /fs; ls /fs.
The second is that sometimes cnp is accessed without having been
properly initialized: cnp->cn_nameptr points to an earlier name while
"len" contains the length of a current name of different size. This
leads to an attempt to dereference *(cn->cn_nameptr + len) which will
sometimes cause a page fault and a panic.
With these two fixes, client side readdirplus works correctly with
FreeBSD, IRIX 6.5.4 and Solaris 2.5.1 and 2.6 servers.
Submitted by: Matthew Dillon <dillon@backplane.com>
being incremented by 4 bytes too few each time through the loop, which
allows more data into the mbuf chain that we really want. In the worst
case, when we're using 32K read/write sizes with a TCP client, this causes
readdirplus replies to sometimes exceed NFS_MAXPACKET which leads to a
panic. This problem cropped up for me using an IRIX 6.5.4 NFSv3 TCP client
with 32K read/write sizes, however supposedly it can be triggered by
WinNT NFS servers too. In theory, it can probably be triggered by any
NFS v3 implementation using TCP as long as it's using the maxiumum block
size.
Reviewed by: Matthew Dillon <dillon@backplane.com>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
The following ugly hack to the exit path of nfs_readlinkrpc() circumvents
an Auspex bug: for symlinks longer than 112 (0x70) they return a 1024 byte
xdr string - the correct data with many nulls appended. Without this fix
namei returns ENAMETOOLONG, at least it does on our source base and on
FreeBSD 3.0. Note we do not (and should not) rely upon their null padding.
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
mount point for seeing whether or not the new nfsnode is already in the
hash queue. We're pretty much guaranteed that the old nfsnode is already
in the hash queue. Wank! Infinite Loop! Looks like just a minor typo....
(ah the influence of fortran ... np && np2... why not nfsnode_the_first &&
nfsnode_the_second???)...
make sure we've freed any allocated resources (to avoid a memory leak)
and and do the right thing with respect to the nfs node hash lock we'd
acquired.
txdr_hyper and fxdr_hyper tweaks to avoid excessive CPU order knowledge.
nfs_serv.c: don't call nfsm_adj() with negative values, windows clients
could crash servers when doing a readdir of a large directory.
nfs_socket.c: Use IP_PORTRANGE to get a priviliged port without a spin
loop trying to bind(). Don't clobber a mbuf pointer or we get panics
on a NFS3ERR_JUKEBOX error from a server when reusing a freed mbuf.
nfs_subs.c: Don't loose st_blocks on NFSv2 mounts when > 2GB.
Obtained from: OpenBSD
udev_t in the kernel but still called dev_t in userland.
Provide functions to manipulate both types:
major() umajor()
minor() uminor()
makedev() umakedev()
dev2udev() udev2dev()
For now they're functions, they will become in-line functions
after one of the next two steps in this process.
Return major/minor/makedev to macro-hood for userland.
Register a name in cdevsw[] for the "filedescriptor" driver.
In the kernel the udev_t appears in places where we have the
major/minor number combination, (ie: a potential device: we
may not have the driver nor the device), like in inodes, vattr,
cdevsw registration and so on, whereas the dev_t appears where
we carry around a reference to a actual device.
In the future the cdevsw and the aliased-from vnode will be hung
directly from the dev_t, along with up to two softc pointers for
the device driver and a few houskeeping bits. This will essentially
replace the current "alias" check code (same buck, bigger bang).
A little stunt has been provided to try to catch places where the
wrong type is being used (dev_t vs udev_t), if you see something
not working, #undef DEVT_FASCIST in kern/kern_conf.c and see if
it makes a difference. If it does, please try to track it down
(many hands make light work) or at least try to reproduce it
as simply as possible, and describe how to do that.
Without DEVT_FASCIST I belive this patch is a no-op.
Stylistic/posixoid comments about the userland view of the <sys/*.h>
files welcome now, from userland they now contain the end result.
Next planned step: make all dev_t's refer to the same devsw[] which
means convert BLK's to CHR's at the perimeter of the vnodes and
other places where they enter the game (bootdev, mknod, sysctl).
confusing the directory read cookie cache. The nfs_access implementation
for v2 mounts attempts to read from the directory if root is the user
so that root can't access cached files when the server remaps root
to some other user.
Submitted by: Doug Rabson <dfr@nlsystems.com>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
piecemeal, middle-of-file writes for NFS. These hacks have caused no
end of trouble, especially when combined with mmap(). I've removed
them. Instead, NFS will issue a read-before-write to fully
instantiate the struct buf containing the write. NFS does, however,
optimize piecemeal appends to files. For most common file operations,
you will not notice the difference. The sole remaining fragment in
the VFS/BIO system is b_dirtyoff/end, which NFS uses to avoid cache
coherency issues with read-merge-write style operations. NFS also
optimizes the write-covers-entire-buffer case by avoiding the
read-before-write. There is quite a bit of room for further
optimization in these areas.
The VM system marks pages fully-valid (AKA vm_page_t->valid =
VM_PAGE_BITS_ALL) in several places, most noteably in vm_fault. This
is not correct operation. The vm_pager_get_pages() code is now
responsible for marking VM pages all-valid. A number of VM helper
routines have been added to aid in zeroing-out the invalid portions of
a VM page prior to the page being marked all-valid. This operation is
necessary to properly support mmap(). The zeroing occurs most often
when dealing with file-EOF situations. Several bugs have been fixed
in the NFS subsystem, including bits handling file and directory EOF
situations and buf->b_flags consistancy issues relating to clearing
B_ERROR & B_INVAL, and handling B_DONE.
getblk() and allocbuf() have been rewritten. B_CACHE operation is now
formally defined in comments and more straightforward in
implementation. B_CACHE for VMIO buffers is based on the validity of
the backing store. B_CACHE for non-VMIO buffers is based simply on
whether the buffer is B_INVAL or not (B_CACHE set if B_INVAL clear,
and vise-versa). biodone() is now responsible for setting B_CACHE
when a successful read completes. B_CACHE is also set when a bdwrite()
is initiated and when a bwrite() is initiated. VFS VOP_BWRITE
routines (there are only two - nfs_bwrite() and bwrite()) are now
expected to set B_CACHE. This means that bowrite() and bawrite() also
set B_CACHE indirectly.
There are a number of places in the code which were previously using
buf->b_bufsize (which is DEV_BSIZE aligned) when they should have
been using buf->b_bcount. These have been fixed. getblk() now clears
B_DONE on return because the rest of the system is so bad about
dealing with B_DONE.
Major fixes to NFS/TCP have been made. A server-side bug could cause
requests to be lost by the server due to nfs_realign() overwriting
other rpc's in the same TCP mbuf chain. The server's kernel must be
recompiled to get the benefit of the fixes.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
1:
s/suser/suser_xxx/
2:
Add new function: suser(struct proc *), prototyped in <sys/proc.h>.
3:
s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/
The remaining suser_xxx() calls will be scrutinized and dealt with
later.
There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.
More changes to the suser() API will come along with the "jail" code.
unallocated parts of the last page when the file ended on a frag
but not a page boundary.
Delimitted by tags PRE_MATT_MMAP_EOF and POST_MATT_MMAP_EOF,
in files alpha/alpha/pmap.c i386/i386/pmap.c nfs/nfs_bio.c vm/pmap.h
vm/vm_page.c vm/vm_page.h vm/vnode_pager.c miscfs/specfs/spec_vnops.c
ufs/ufs/ufs_readwrite.c kern/vfs_bio.c
Submitted by: Matt Dillon <dillon@freebsd.org>
Reviewed by: Alan Cox <alc@freebsd.org>
including alan, john, me, luoqi, and kirk
Submitted by: Matt Dillon <dillon@frebsd.org>
This change implements a relatively sophisticated fix to getnewbuf().
There were two problems with getnewbuf(). First, the writerecursion
can lead to a system stack overflow when you have NFS and/or VN
devices in the system. Second, the free/dirty buffer accounting was
completely broken. Not only did the nfs routines blow it trying to
manually account for the buffer state, but the accounting that was
done did not work well with the purpose of their existance: figuring
out when getnewbuf() needs to sleep.
The meat of the change is to kern/vfs_bio.c. The remaining diffs are
all minor except for NFS, which includes both the fixes for bp
interaction AND fixes for a 'biodone(): buffer already done' lockup.
Sys/buf.h also contains a chaining structure which is not used by
this patchset but is used by other patches that are coming soon.
This patch deliniated by tags PRE_MAT_GETBUF and POST_MAT_GETBUF.
(sorry for the missing T matt)
routine was [ab]used for two different things, and you couldn't tell from
the wait channel which one had wedged.
Catch a few things missing from NFS_NOSERVER.
This makes it possible to change the sysctl tree at runtime.
* Change KLD to find and register any sysctl nodes contained in the loaded
file and to unregister them when the file is unloaded.
Reviewed by: Archie Cobbs <archie@whistle.com>,
Peter Wemm <peter@netplex.com.au> (well they looked at it anyway)
the API for freeing up cnp's. This cleanup should not effect nominal
operation one way or the other since NFS VOPs just happen to be called
with flags that match what it actually does to the NAMEI components it
gets. Still, if an NFS error occured, there was probably some memory
leakage of NAMEI components with certain NFS VOP ops.
to fix the problem w/ NFSV3 whereby a make installworld would get into
high-network-bandwidth situations continuously trying to retry nfs writes
that fail with a 'stale file handle' error.
changes to the VM system to support the new swapper, VM bug
fixes, several VM optimizations, and some additional revamping of the
VM code. The specific bug fixes will be documented with additional
forced commits. This commit is somewhat rough in regards to code
cleanup issues.
Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.
These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.
Reviewed by: Bruce Evans <bde@zeta.org.au>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by: Mike Spengler <mks@networkcs.com>
cache. If the cached result lets us say "yes", then go with that. If
we're not sure, or we think the answer might be "no", go to the wire to be
certain. This avoids all of the possible false veto cases, and allows us
to key the cached value with just the UID for which the cached value holds,
reducing the bloat of the nfsnode structure from 104 bytes to just 12 bytes.
Since the "yes" case is by far the most common, this should still provide
a substantial performance improvement. Also default the cache to on, with
a conservative timeout (2 seconds). This improves performance if NFS is
loaded as a KLD module, as there's not (yet) code to parse an option out
of the module arguments to set it, and sysctl doesn't work (yet) for OIDs
in modules.
The 'accelerator' mode was suggested by Bjoern Groenvall (bg@sics.se)
Feedback on this would be appreciated as testing has been necessarily
limited by Comdex, and it would be valuable to have this in 2.2.8.
This yields startling performance increases for NFS clients for many
access profiles, due to the fact that ACCESS results are persistently
cached in the namecache in many cases.
Note that the code is somewhat conservative in that it requires an
exact credential match for a cache hit. This bloats the nfsnode
structure by sizeof(struct ucred) (96 bytes). Any less conservative
approach opens the possibility for a false veto in eg. setuid
applications. Alternative suggestions would be welcomed.
The cache is normally disabled, to activate set the sysctl variable
vfs.nfs.access_cache_timeout to a nonzero value. This is the time in
seconds that a cached entry will be considered valid; useful values appear
to be 2-10 seconds. Performance of the cache can be monitored with the
vfs.nfs.access_cache_hits and vfs.nfs.access_cache_hits variables.
second argument. np_size is a 64 bit int, so is the second arg. This
might have caused needless 2G/4G file size problems.
I believe it was Bruce who queried this.
sure that this is necessary to be a sync write here since a VOP_FSYNC()
follows and it will schedule, sort and complete the writes that the
vm_object_page_clean() started (as I think I understand things).
for some of the fsinfo RPC fields. It is strictly speaking not
wrong to do this, as the spec says that "it is expected that a
server will make a best effort at supporting all the attributes",
but pretty unusual. You guessed it, it's NT servers that do it.'
Obtained from: Frank van der Linden <frank@wins.uva.nl>
is being deleted due to an forcible unmount. The problem is
that vgone calls vclean() which then calls calls nfs_inactive()
with VXLOCK set on the vnode. Nfs_inactive() was calling vget()
to get a reference on the vnode, which in turn hung on VXLOCK.
Nfs_inactive() now checks v_usecount to make sure that the vnode
is not coming from vclean() before it does a vget().
is less than NFS_MINPACKET or greater than NFS_MAXPACKET in size, it
barfs and, I think, drops the connection.
However, there's no guarantee that in a multi-fragment RPC, all the
fragments will be at least as large as NFS_MINPACKET.
In fact, with the version of "tclnfs" we have here, which supports NFS
over TCP, at least when built under SunOS 4.1.3 (i.e., with 4.1.3's
user-mode ONC RPC library), I can *repeatably* cause "tclnfs" to send a
request with more than one fragment, one of which is only 8 bytes long.
I just do a 3877-byte write to a file, at an offset of 0.
The check that "slp->ns_reclen" is greater than or equal to
NFS_MINPACKET serves no useful purpose - if the NFS server code can't
handle packets < NFS_MINPACKET bytes, it can't handle them over *any*
protocol, so the check has to be done above the RPC-over-TCP layer - and
should be removed.
Obtained from: Fix from Guy Harris, forwarded by Rick Macklem.
references to them.
The change a couple of days ago to ignore these numbers in statically
configured vfsconf structs was slightly premature because the cd9660,
cfs, devfs, ext2fs, nfs vfs's still used MOUNT_* instead of the number
in their vfsconf struct.
detachment of vfs sysctls. Unloading of vfs LKMs doesn't actually
work for any vfs, since it leaves garbage pointers to memory
allocation control structures.
type numbers in vfs attach order (modulo incomplete reuse of old
numbers after vfs LKMs are unloaded). This requires reinitializing
the sysctl tree (or at least the vfs subtree) for vfs's that support
sysctls (currently only nfs). sysctl_order() already handled
reinitialization reasonably except it checked for annulled self
references in the wrong place.
Fixed sysctls for vfs LKMs.
when nfs is an LKM. Declare it in a header file. Don't forget to use
it in non-Lite2 code. Initialize it to -1 instead of to 0, since 0
will soon be the mount type number for the first vfs loaded.
NetBSD uses strcmp() to avoid this ugly global.
another specialized mbuf type in the process. Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
interface congestion (eg: nfs over a ppp link, etc). Don't log these
for UDP mounts, and don't cause syscalls to fail with EINTR.
This stops the 'nfs send error 55' warnings.
If the error is because the system is really hosed, this is the least
of your problems...
respectively. Most of the longs should probably have been
u_longs, but this changes is just to prevent warnings about
casts between pointers and integers of different sizes, not
to fix poorly chosen types.
as the value in b_vp is often not really what you want.
(and needs to be frobbed). more cleanups will follow this.
Reviewed by: Bruce Evans <bde@freebsd.org>
NFS_*TIMO should possibly be converted to sysctl vars (jkh's suggestion),
but in some cases it looks like nfs keeps a copy of the value in a struct
hash sizes are already ifdef'd KERNEL, so there aren't userland inpact
from them...
NFS_MINATTRTIMO VREG attrib cache timeout in sec
NFS_MAXATTRTIMO
NFS_MINDIRATTRTIMO VDIR attrib cache timeout in sec
NFS_MAXDIRATTRTIMO
NFS_GATHERDELAY Default write gather delay (msec)
NFS_UIDHASHSIZ Tune the size of nfssvc_sock with this
NFS_WDELAYHASHSIZ and with this
NFS_MUIDHASHSIZ Tune the size of nfsmount with this
NFS_NOSERVER (already documented in LINT)
NFS_DEBUG turn on NFS debugging
also, because NFS_ROOT is used by very different files, it has been
renamed to opt_nfsroot.h instead of the old opt_nfs.h....
Pre-2.8 versions of gcc generate a call to __divdi3() for all 64-bit
signed divisions, but egcs optimizes them to a shift and fixup when
the divisor is a constant power of 2. Unfortunately, it generates
a call to __cmpdi2() for the fixup, although all except possibly
ancient versions of gcc and egcs do ordinary 64-bit comparisons
inline.
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
readrpc/writerpc, since they assume it's already been done. This could
break if the first read/write access to a nfs filesystem was an exec() or
mmap() instead of a read(), write() syscall. (or statfs()).
nfs_getpages() could return an errno (EOPNOTSUPP) instead of a VM_PAGER_*
return code. Some layout tweaks for the get/putpages code.
an (over?) conservative assumption about what the client can store in it's
buffer cache using a signed 32-bit 512-byte block number index. Otherwise
it's possible for some file access when maxfilesize = 0 (eg: /usr is nfs
mounted and doing an execve())
Pointed out by: bde
XXX It might make sense to do a preemptive nfs_fsinfo() call at mount time.
it just makes more work. We pass a copy of the uid/gid with the
credentials. (although, this may need to be revisited if a non AUTHUNIX
authentication method (such as NFSKERB) ever gets implemented).
Obtained from: NetBSD
