New sysctl/tunables can now set the interval (in seconds) between
rate-limited crypto warnings. The new sysctls are:
- kern.cryptodev_warn_interval for /dev/crypto
- net.inet.ipsec.crypto_warn_interval for IPsec
- kern.kgssapi_warn_interval for KGSSAPI
Reviewed by: cem
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20555
This documents the behavior of sysctl_msec_to_ticks and
SYSCTL_{ADD,}_SBINTIME_[UM]SEC.
Reviewed by: cem
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20596
length to the difference of the two offsets that define the gap, to
avoid overflow, rather that adding the length to an offset and
comparing that to another offset.
This addresses an overflow issue reported by Peter Holm on i386.
Reported by: pho
Tested by: pho
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20594
The VirtIO standard supports two schemes for notification suppression:
a notification enable bit and a more sophisticated one (event_idx) that
also supports delayed notifications. Currently bhyve fully supports
only the first scheme. This patch hides the notification suppression
internals by means of two inline routines, vq_kick_enable() and
vq_kick_disable(), and makes the code more readable.
Moreover, further improve readability by replacing the call to mb()
with a call to atomic_thread_fence_seq_cst(), which is already used
in virtio.c
Reviewed by: pmooney_pfmooney.com, bryanv
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20581
When building a kernel supporting PSERIES but not POWERNV,
the compiler would complain about an error variable being
possibly used before being initialized.
In practice, however, this should never happen. In any case, it
is now initialized to an error value.
Before this change, OFW initrd (as md) handling code was simulating an ofwbus
device. But as there isn't really a Device Tree (DT) node representing OFW
initrd (it is specified in 2 properties under /chosen), its driver was in fact
stealing other driver's DT node. This was noticed after MD_ROOT_MEM became
default and QEMU's USB keyboard stopped working under VNC.
This change consists in simplifying the process of detection and mapping of
initrd memory, turning it into a simple startup step, instead of trying to
simulate a device.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20553
The two most recent additions to the elf auxiliary vector are
HWCAP and HWCAP2 which describe platform specific cpu capabilities.
Make procstat recognize these fields so that they aren't displayed
as UNKNOWN.
Reviewed by: trociny, markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20582
AT_HWCAP is a field in the elf auxiliary vector meant to describe
cpu-specific hardware features. For RISC-V we want to use this to
indicate the presence of any standard extensions supported by the CPU.
This allows userland applications to query the system for supported
extensions using elf_aux_info(3).
Support for an extension is indicated by the presence of its
corresponding bit in AT_HWCAP -- e.g. systems supporting the 'c'
extension (compressed instructions) will have the second bit set.
Extensions advertised through AT_HWCAP are only those that are supported
by all harts in the system.
Reviewed by: jhb, markj
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20493
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.
MFC after: 2 weeks
This change rights that comparison.
Reported by: pho
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20595
detection pins to the Marvell Xenon SDHCI controller.
These features are enable by 'vqmmc-supply' and 'cd-gpios' properties in the
DTS.
This fixes the SD Card detection on espressobin.
Sponsored by: Rubicon Communications, LLC (Netgate)
children of every entry on the search path as part of updating values of
the max_free field. By comparing the max_free values of an entry and its
child on the search path, the code can avoid accessing the child off the
path in cases where the max_free value decreases along the path.
Specifically, this patch changes splay_split so that the max_free field
of every entry on the search path is replaced, temporarily, by the
max_free field from its child not on the search path or, if the child
in that direction is NULL, then a difference between start and end
values of two pointers already available in the split code, without
following any next or prev pointers. However, to find that max_free
value does not require looking toward that other child if either the
child on the search path has a lower max_free value, or the current max_free
value is zero, because in either case we know that the value of max_free for
the other child is the value we already have. So, the changes to
vm_entry_splay_split make sure that we know all the off-search-path entries
we will need to complete the splay, without looking at all of them. There is
an exception at the bottom of the search path where we cannot rely on the
max_free value in the direction of the NULL pointer that ends the search,
because of the behavior of entry-clipping code.
The corresponding change to vm_splay_entry_merge makes it simpler, since it's
just reversing pointers and updating running maxima.
In a test intended to exercise vigorously the vm_map implementation, the
effect of this change was to reduce the data cache miss rate by 10-14% and
the running time by 5-7%.
Tested by: pho
Reviewed by: alc
Approved by: kib (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19826
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.
The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).
Sponsored by: Rubicon Communications, LLC (Netgate)
for both the lower and upper bound modifications. Change the error returned
to ENOMEM. Rename the parameter size to len and make size a local variable
that stores the value of len after it has been modified.
This addresses concerns expressed by Bruce Evans after r348843.
Reported by: brde@optusnet.com.au
Reviewed by: kib, markj (mentors)
MFC after: 3 days
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20592
This allows SDIO (through CAM) to attach to an upstream, e.g.,
..
sdhci_bcm0 pnpinfo name=mmc@7e300000 compat=brcm,bcm2835-mmc
sdiob0
..
Without this, upon trying to load sdio, we would panic with
"bus_add_child is not implemented".
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
These algorithms are deprecated algorithms that will have no in-kernel
consumers in FreeBSD 13. Specifically, deprecate the following
algorithms:
- ARC4
- Blowfish
- CAST128
- DES
- 3DES
- MD5-HMAC
- Skipjack
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20554
All of these algorithms are explicitly marked SHOULD NOT in one of these
RFCs.
Specifically, RFC 6649 deprecates all algorithms using DES as well as
the "export-friendly" variant of RC4. RFC 8429 deprecates Triple DES
and the remaining RC4 algorithms.
Reviewed by: cem
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20343
While it is true that the new vmspace passed to vmspace_switch_aio
will always have a valid reference due to the AIO job or the extra
reference on the original vmspace in the worker thread, it is not true
that the old vmspace being switched away from will have more than one
reference.
Specifically, when a process with queued AIO jobs exits, the exit hook
in aio_proc_rundown will only ensure that all of the AIO jobs have
completed or been cancelled. However, the last AIO job might have
completed and woken up the exiting process before the worker thread
servicing that job has switched back to its original vmspace. In that
case, the process might finish exiting dropping its reference to the
vmspace before the worker thread resulting in the worker thread
dropping the last reference.
Reported by: np
Reviewed by: alc, markj, np, imp
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D20542
Enable synaptics and elantech touchpads, as well as IBM/Lenovo TrackPoints
by default, instead of having users find and toggle a loader tunable.
This makes things like two finger scroll and other modern features work out
of the box with X. By enabling these settings by default, we get a better
desktop experience in X, since xserver and evdev can make use of the more
advanced synaptics and elantech features.
Reviewed by: imp, wulf, 0mp
Approved by: imp
Sponsored by: B3 Init (zeising)
Differential Revision: https://reviews.freebsd.org/D20507
misunderstanding that the function does not work additive
when repeatedly called for diffferent bands.
Reviewed by: avos (a few months ago)
MFC after: 2 weeks
When an HMI occurs a message event also gets created with the details of the
exception. Hook into the messaging framework to retrieve the HMI message.
Nothing is done with it yet, except to panic on unhandled exception.
vmem_xalloc() cannot be called while holding a nonblocking mutex, warned
by WITNESS. The lock may not be necessary in general, but it avoids
superfluous concurrent OPAL calls for the same sensor.
Reported by: pkubaj
32-bit machine, a len parameter just a few bytes short of 4G, rounded
up to a page boundary and hitting zero then, is not okay. Return
failure in that case.
Reported by: pho
Reviewed by: alc, kib (mentor)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D20580
The freopen(3) was replaced with fileargs_open(3) and fclose(3).
In the following function, we skip if the stream is standard in, so it is
safe to do so.
This also requires us to change the logic first to open the file and then
check its status. The stat(2) is disallowed in capability mode.
This commit unbrakes the -F option.
The bug was introduced in the r348708.
Reported by: pho
Tested by: pho
The mcall_trap() dummy function is unused, and should be removed as we
are unlikely to support M-mode traps any time soon.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20494
Some of the config options that are disabled by default seem to be only
for historical reasons. Enable those that appear to no longer be
problematic. This includes WITH_CTF, STACK, GEOM_RAID, and re-enabling
blacklisted kernel modules.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20495
Most architectures print their total (real) and available memory during
boot. Properly initialize the realmem global and print these messages.
Also print the physical memory chunks (behind a bootverbose flag).
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20496
Add the enter and exit events, similar to what's found in
hammer_time() on amd64. We must use TSRAW as the pcpu isn't yet
initialized.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20497
The gp register is intended to used by the linker as another means of
performing relaxations, and should point to the small data section (.sdata).
Currently gp is being used as the pcpu pointer within the kernel, but the more
appropriate choice for this is the tp register, which is unused.
Swap existing usage of gp with tp within the kernel, and set up gp properly
at boot with the value of __global_pointer$ for all harts.
Additionally, remove some cases of accessing tp from the PCB, as it is not
part of the per-thread state. The user's tp and gp should be tracked only
through the trapframe.
Reviewed by: markj, jhb
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19893
On vtnet device reset it is necessary to wait for threads to stop TX and
RX processing. However, the rx_in_progress variable (used for to wait for
RX processing to stop) is actually useless, and can be removed. Acquiring
and releasing the RX lock is enough to synchronize correctly. Moreover,
it is possible to reset the device while holding both TX and RX locks, so
that the "resetting" variable becomes unnecessary for the RX thread, and
can be protected by the TX lock (instead of being volatile).
Reviewed by: jhb, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20543
previously addressed in r348246.
This pmap problem also exists on arm64 and riscv. However, the original
solution developed for amd64 and i386 cannot be used on arm64 and riscv. In
particular, arm64 and riscv do not define a PG_PROMOTED flag in their level
2 PTEs. (A PG_PROMOTED flag makes no sense on arm64, where unlike x86 or
riscv we are required to break the old 4KB mappings before making the 2MB
mapping; and on riscv there are no unused bits in the PTE to define a
PG_PROMOTED flag.)
This commit implements an alternative solution that can be used on all four
architectures. Moreover, this solution has two other advantages. First, on
older AMD processors that required the Erratum 383 workaround, it is less
costly. Specifically, it avoids unnecessary calls to pmap_fill_ptp() on a
superpage demotion. Second, it enables the elimination of some calls to
pagezero() in pmap_kernel_remove_{l2,pde}().
In addition, remove a related stale comment from pmap_enter_{l2,pde}().
Reviewed by: kib, markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20538
Add strict checks for unused bit states in Elantech trackpoint packet
parser to filter out spurious events produces by some hardware which
are detected as trackpoint packets. See comment on r328191 for example.
Tested by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
Sign bits for X and Y motion data were taken from wrong places.
PR: 238291
Reported by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
Tested by: Andrey Kosachenko <andrey.kosachenko@gmail.com>
MFC after: 2 weeks
Spell all bits in the hex constants.
Since all lines are modified, consistently use <tab> after #define.
Reviewed by: alc (previous version), dougm
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D20560
Add the customary warnings to disable format checking on armv7. Code
move to new files, and the unconditional setting of WARNS to 6
provoked it on tinerbox...
