image.
The dynamic linker still requires that program headers of the
executable or dso are mapped by a PT_LOAD segment.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D3871
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
Simplifying maintainance and options (only one place to deal with MK_DMAGENT)
This also makes packaging base less intrusive by getting a single point where
to add tags.
The exists(${DESTDIR}...) check runs with DESTDIR being blank. When the
target runs it does have DESTDIR=${STAGE_OBJTOP} via bsd.sys.mk. This
results in the first execution warning that the symlink is missing. The
second run does run fine. However, this chflags is not needed at all
for META_MODE/STAGING since we never had this path being a schg file
while using META_MODE.
Sponsored by: EMC / Isilon Storage Division
on the Variant II code, however arm64 uses Variant I. The former placed the
thread pointer after the data, pointing at the thread control block, while
the latter places these before said data.
Because of this we need to use the size of the previous entry to calculate
where to place the current entry. We also need to reserve 16 bytes at the
start for the thread control block.
This also fixes the value of TLS_TCB_SIZE to be correct. This is the size
of two unsigned longs, i.e. 2 * 8 bytes.
While here remove the bogus adjustment of the pointer in the
R_AARCH64_TLS_TPREL64 case. It should be the offset of the data relative
to the thread pointer, including the thread control block.
Sponsored by: ABT Systems Ltd
have TLS program header. This is needed on architectures with Variant I
tls, that is arm, arm64, mips, and powerpc. These place the thread control
block at the start of the buffer and, without this, this data may be
trashed.
This appears to not be an issue on mips or powerpc as they include a second
adjustment to move the thread local data, however this is on arm64 (with a
future change to fix placing this data), and should be on arm. I am unable
to trigger this on arm, even after changing the code to move the data
around to make it more likely to be hit. This is most likely because my
tests didn't use the variable in offset 0.
Reviewed by: kib
MFC after: 1 week
Sponsored by: ABT Systems Ltd
Clang emits SSE instructions on amd64 in the common path of
pthread_mutex_unlock. If the thread does not otherwise use SSE,
this usage incurs a context-switch of the FPU/SSE state, which
reduces the performance of multiple real-world applications by a
non-trivial amount (3-5% in one application).
Instead of this change, I experimented with eagerly switching the
FPU state at context-switch time. This did not help. Most of the
cost seems to be in the read/write of memory--as kib@ stated--and
not in the #NM handling. I tested on machines with and without
XSAVEOPT.
One counter-argument to this change is that most applications already
use SIMD, and the number of applications and amount of SIMD usage
are only increasing. This is absolutely true. I agree that--in
general and in principle--this change is in the wrong direction.
However, there are applications that do not use enough SSE to offset
the extra context-switch cost. SSE does not provide a clear benefit
in the current libthr code with the current compiler, but it does
provide a clear loss in some cases. Therefore, disabling SSE in
libthr is a non-loss for most, and a gain for some.
I refrained from disabling SSE in libc--as was suggested--because
I can't make the above argument for libc. It provides a wide variety
of code; each case should be analyzed separately.
https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055193.html
Suggestions from: dim, jmg, rpaulo
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell Inc.
_rtld_bind. The compiler may generate code using these registers and not
save them. Unfortunately, as we make use of libc, we are unable to disallow
rtld from using floating-point register without also doing the same for the
parts of libc we use, or by limiting what _rtld_bind is able to call.
Obtained from: ABT Systems Ltd
Sponsored by: The FReeBSD Foundation
location pointer when the return value doesn't fit in a register, e.g. when
returning a struct.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
When enough time has passed for users to update their userland the kernel
fix will be applied. This will change the ABI to have x0 point to the args
and sp be correctly aligned.
It is expected this compatibility code can be removed when the kernel and
qemu usermode emulation have both been updated for the new ABI.
This fixes clang failures, and most likely other crashes.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
The requirement is for a GCC-compatible compiler and not necessarily
GCC itself. However, we currently expect any compiler used for building
the whole of FreeBSD to be GCC-compatible and many things will break if
not; there's no longer a need to have an explicit test for this in rtld.
Reviewed by: imp, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2422
According to standard, the presence of the flags only means that the
object path must be resolved at the time object loading, instead of my
reading that the flag is required to enable token substitution at all.
The consequence is that -z origin linker flag is no longer required
for the token substitution in the run/rpath or the needed library
soname. It is only recommended if token substition is needed at
dlopen(3) time, since namecache might drop the required entries at the
time of resolution.
Found, reviewed and tested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
* Add VCREAT flag to indicate when a new file is being created
* Add VVERIFY to indicate verification is required
* Both VCREAT and VVERIFY are only passed on the MAC method vnode_check_open
and are removed from the accmode after
* Add O_VERIFY flag to rtld open of objects
* Add 'v' flag to __sflags to set O_VERIFY flag.
Submitted by: Steve Kiernan <stevek@juniper.net>
Obtained from: Juniper Networks, Inc.
GitHub Pull Request: https://github.com/freebsd/freebsd/pull/27
Relnotes: yes
as always participating in the global symbols namespace, regardless of
the way the object was brought into the process address space.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is only an interim fix; MIPS should be using the MI code instead,
which does not have this issue.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D661
ABI specifies that, for R_AARCH64_TLSDESC relocations, we use the symbol
value, addend, and object tls offset to calculate the offset from the tls
base. We then cache this value for future reference.
Differential Revision: https://reviews.freebsd.org/D2183
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
still need libc_pic for a few things, but this is expected to be ready
soon.
Differential Revision: https://reviews.freebsd.org/D2136
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
rtld on x86 to be hidden. This is a micro-optimization, which allows
intrinsic references inside rtld to be handled without indirection
through PLT. The visibility of rtld symbols for other objects in the
symbol namespace is controlled by a version script.
Reviewed by: kan, jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
without any translation. If the file is a symbolic link, $ORIGIN may not be
expanded to the actual origin. Use realpath(3) to properly expand $ORIGIN
to its absolute path.
Reviewed by: kib
MFC after: 1 week
Avoid use of register variables, which some compilers (e.g. clang)
don't like. It makes the code a little clearer as well.
This allows a clang 3.5 built powerpc world to run (tested in a jail).
MFC after: 1 week
The symbol leaked after r276630 since lib/libc/sys/openat.c defines
versions for openat using .symver (version script cannot assign two
versions to one symbol), and rtld uses openat. Instead, directly use
__sys_openat().
Reported and tested by: antoine
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
rtld-elf for powerpc 32 bit:
libexec/rtld-elf/powerpc/reloc.c:486:6: error: taking the absolute value of unsigned type 'Elf_Addr' (aka 'unsigned int') has no effect [-Werror,-Wabsolute-value]
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^
libexec/rtld-elf/powerpc/reloc.c:486:6: note: remove the call to 'abs' since unsigned values cannot be negative
if (abs(offset) < 32*1024*1024) { /* inside 32MB? */
^~~
1 error generated.
Cast 'offset' to int, since that was intended, and should be safe to do
on architectures with 32-bit two's complement ints.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D1387
it exports to the debugger. It currently has two choices: it can use
a compiled-in path (/libexec/ld-elf.so.1) or it can use the path stored
in the interpreter path in the binary being executed. The runtime linker
currently prefers the second. However, this is usually wrong for compat32
binaries since the binary specifies the path of rtld on a 32-bit system
(/libexec/ld-elf.so.1) instead of the actual path (/libexec/ld-elf32.so.1).
For now, always assume the compiled in path (/libexec/ld-elf32.so.1) as
the rtld path and ignore the path in the binary for the 32-bit runtime
linker.
Differential Revision: https://reviews.freebsd.org/D1236
Reviewed by: kib
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
This implements part of RFC-2217
It's based off a patch originally written by Sujal Patel at Isilon, and
contributions from other Isilon employees.
PR: 173728
Phabric: D995
Reviewed by: markj, markm
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
Linux LD_ITERATE_PHDR(3):
The dlpi_name field is a null-terminated string giving the
pathname from which the shared object was loaded.
That functionality is much more useful than returning just the short
name.
Approved by: kan
Sponsored by: The FreeBSD Foundation
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
e.g. when a global variable is initialized with a pointer to ifunc.
Add symbol type check and call resolver for STT_GNU_IFUNC symbol types
when processing non-PLT relocations, but only after non-IFUNC
relocations are done. The two-phase proceessing is required since
resolvers may reference other symbols, which must be ready to use when
resolver calls are done.
Restructure reloc_non_plt() on x86 to call find_symdef() and handle
IFUNC in single place.
For non-x86 reloc_non_plt(), check for call for IFUNC relocation and
do nothing, to avoid processing relocs twice.
PR: 193048
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
All of the sources for the tests are contained in the
current working directory and the subdirectories
Phabric: D537
Reviewed by: jmmv
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
build time by using atf_tc_get_config_var(tc, "srcdir"))
This will allow end-users to move the binaries to different locations
after they've been built without having to rebuild the binaries with
the new paths
Phabric: D525 (part of a larger patch)
Reviewed by: jmmv
Approved by: jmmv (co-mentor)
As of r126744, we no longer feed the entropy device in jails upon
start, and collecting them is no longer useful.
PR: conf/126744
Submitted by: Eugene Grosbein <eugen grosbein net> (with minor changes)
MFC after: 1 week
Approved by: so (des)
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
With the move of atf-sh into /usr/libexec in r267181, some of the
tests in the integration_test program broke because they could not
execute atf-sh from the path any longer.
This slipped through because I do have a local atf installation in
my home directory that appears in my path, hence the tests could
still execute my own version.
Fix this by forcing /usr/libexec to appear at the beginning of the
path when attempting to execute atf-sh.
To make upgrading easy (and to avoid an unnecessary entry in UPDATING),
make integration_test depend on the Makefile so that a rebuild of the
shell script is triggered. This requires a hack in the *.test.mk files
to ensure the Makefile is not treated as a source to the generated
program. Ugly, I know, but I don't have a better way of doing this at
the moment. Will think of one once I address the TODO in the *.test.mk
files that suggests generalizing the file generation functionality.
PR: 191052
Reviewed by: Garrett Cooper
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
correct stack alignment, however when we have a leaf function that uses
thread local storage it calls __aeabi_read_tp to get the thread pointer.
Neither GCC or clang see this as a function call so will align the stack
to a 4-byte boundary. This may be a problem as _rtld_bind expects to be
on an 8-byte boundary.
The solution is to store a copy of the stack pointer and force the
alignment before calling _rtld_bind.
This fixes a problem with armeb where applications would crash in odd ways.
It should also remove the need for a local patch to clang to force the
stack alignment to an 8-byte boundary, even for leaf functions. Further
testing will be needed before reverting this local change to clang as we
may rely on it in other places.
Reviewed by: jmg@
descriptors in order to relocate RTLD itself. To allocate memory,
we need the pagesizes array initialized, but that happens after
RTLD is relocated. This ordering is important for amd64, but it's
opposite of what ia64 needs. Handle this conflict with the define
called RTLD_INIT_PAGESIZES_EARLY. When defined, obtain the page
sizes before relocating rtld, otherwise do it after.
Test LD_LIBRARY_PATH_FDS by linking a binary that requires a shared
library that isn't in any of the usual search paths. Ensure this fails
when we don't supply LD_LIBRARY_PATH_FDS or we pass invalid information
in it. Ensure it works when we pass the correct directory in various
places in the variable.
Approved by: rwatson (mentor)
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
This variable allows the loading of shared libraries via directory descriptors
rather than via library paths. If LD_LIBRARY_PATH_FDS=3:4:12, the directories
represented by file descriptors 3, 4 and 12 will searched for shared libraries
before the normal path-based mechanisms are used. This allows us to execute
unprivileged binaries from within a Capsicum sandbox even if they require
shared libraries.
Approved by: rwatson (mentor)
Reviewed by: kib
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
mode. This allows the binder to be functional in the child after the
fork (assuming no lazy loading of a filter is needed), but other rtld
services which require write lock on rtld_bind_lock cause deadlock, if
called by child.
Change the _rtld_atfork() to lock the bind lock in write mode, making
the rtld fully functional after the fork.
Pre-resolve the symbols which are called by the libthr' fork()
interposer, since dynamic resolution causes deadlock due to the
rtld_bind_lock already owned in the write mode.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
_rtld_debug_postinit(). [1]
- Use __compiler_membar() instead of inline asm in _r_debug_state() and
_r_debug_postinit(). [2]
Pointy hat to: markj [1]
Reported by: attilio [2]
Discussed with: kib
X-MFC-With: r265456
the victim process before its entry point is called, at which point probes
and DOF data are registered with the kernel. The r_debug_state hook cannot
be used for this purpose, as it is called before the program's init routines
are invoked and in particular before DOF data is registered (via drti.o).
Reviewed by: kib
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
first calls mmap() with the arguments PROT_NONE and MAP_ANON to reserve a
single, contiguous range of virtual addresses for the entire shared library.
Later, rtld calls mmap() with the the shared library's file descriptor
and the argument MAP_FIXED to place the text and data sections within the
reserved range. The rationale for mapping shared libraries in this way is
explained in the commit message for Revision 190885. However, this approach
does have an unintended, negative consequence. Since the first call to
mmap() specifies MAP_ANON and not the shared library's file descriptor, the
kernel has no idea what alignment the vm object backing the file prefers.
As a result, the reserved range's alignment is unlikely to be the same as
the vm object's, and so mapping with superpages becomes impossible. To
address this problem, this revision adds the argument MAP_ALIGNED_SUPER to
the first call to mmap() if the text section is larger than the smallest
superpage size.
To determine if the text section is larger than the smallest superpage
size, rtld must always fetch the page size information. As a result, the
private code for fetching the base page size in rtld's builtin malloc is
redundant. Eliminate it. Requested by: kib
Tested by: zbb (on arm)
Reviewed by: kib (an earlier version)
Discussed with: jhb
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
as possible. This does not change the wording in any way.
Remove the 3rd clause ("advertising clause") of the BSD license as
permitted by the University of Berkeley on July 22, 1999. While the
clause itself mentions Lawrence Berkeley Laboratory, UCB is the sole
copyright holder of this file.
Reviewed by: imp, emaste, eadler
MFC after: 2 weeks
Some modules do not align data at least to size of pointer, they uses a
smaller alignment, but our pointer should be aligned to its native
boundary, otherwise on some platforms, hardware alignment checking
will cause bus error.
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
saving the pointer will overwrite bytes belongs to another memory block
unexpectly, to fix the problem, use (allocated address + sizeof(void *)) as
initial value, and slip to next aligned address, so maximum extra bytes is
sizeof(void *) + align - 1.
Tested by: Andre Albsmeier < mail at ma17 dot ata dot myota dot orgndre >
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
the max required alignment for the static tls segments, and honor it
when carving the pieces for next module, from the static space. Use
aligned allocator to get properly-aligned dynamic blocks.
Reported by: dt71@gmx.com
Reviewed by: kan
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
used by auditing tools to determine the userland patch level when it
differs from what `uname -r` reports. This can happen when the system
is kept up-to-date using freebsd-update and the last SA did not touch
the kernel, or when a new kernel has been installed but the system has
not yet rebooted.
Approved by: re (glebius)
On MIPS the .dynamic section is read-only, so the pointer to rtld
information for debuggers cannot be stored there (in DT_DEBUG).
Instead, a special section .rld_map is used.
Sponsored by: DARPA, AFRL
Approved by: re (delphij)
available in 32-bit compatibility mode, unconditional.
Overhaul the man page, which had evolved more by accretion than by design.
Approved by: re (gjb)
MFC after: 3 weeks
PATH_MAX after the token substitution. This is wrong, because
origin_subst_one() performs the substitution on the whole rpath and
similar strings, which contain several pathes separated by colon. As
result, long (but correct) rpath consisting of many path elements is
rejected by the function.
Correct the problem by rewriting the origin_subst_one() to perform two
passes, first pass to calculate the number of substitutions to be
performed, and second pass to generate the resulting string. Second
pass allocates the memory for the result based on the count from the
first pass, without enforcing a limit.
Reported and tested by: pgj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Normal libraries have base address 0 and are unaffected by this change.
PR: 176216
Submitted by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: kib
MFC after: 1 week
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
instead of /libexec/ld-elf.so.1. Below in the Makefile we execute
'chflags noschg ${DESTDIR}/usr/libexec/ld-elf.so.1', which follows
symlink and removes 'schg' flag from system's /libexec/ld-elf.so.1
instead of the one in DESTDIR. It is also more friendly to use
replative paths in symlink in case of jail/chroot environments.
Obtained from: WHEEL Systems
MFC after: 2 weeks
Rtld did not set FD_CLOEXEC on its internal file descriptors; therefore,
such a file descriptor may be passed to a process created by another thread
running in parallel to dlopen() or fdlopen().
No other threads are expected to be running during parsing of the hints
and libmap files but the file descriptors need not be passed to child
processes so add O_CLOEXEC there as well.
This change will break fdlopen() (as used by OpenPAM) on kernels without
F_DUPFD_CLOEXEC (added in July). Note that running new userland on old
kernels is not supported.
Reviewed by: kib
Previously atrun refused to run jobs if load average was not below fixed limit of 1.5.
PR: 173175
Reviewed by: peterj
Approved by: trasz (mentor)
MFC after: 2 weeks
current version of FreeBSD, this isn't guarenteed by the API.
Custom security modules, or future implementations of the setuid and
setgid may fail.
Submitted by: Erik Cederstrand
Approved by: cperciva
MFC after: 3 days
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
In addition to adding missing `static' keywords:
- bin/dd: Pull in `extern.h' to guarantee consistency with source file.
- libexec/rpc.rusersd: Move shared globals into an extern.h.
- libexec/talkd: Move `debug' and `hostname' into extern.h.
- usr.bin/cksum: Put counters in extern.h, as they are used by ckdist/mtree.
- usr.bin/m4: Move `end_result' into extern.h.
- usr.sbin/services_mkdb: Move shared globals into an extern.h.
In addition to adding `static' where possible:
- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
This self-written compiler warning, which is hopefully going to be
committed into LLVM sources soon, warns about potentially missing
`static' keywords, similar to -Wmissing-prototypes.
- bin/pax: Move external declaration of chdname and s_mask into extern.h.
- bin/setfacl: Move setfacl.c-specific stuff out of setfacl.h.
- sbin/mount_fusefs: Remove char *progname; use getprogname().
- others: add `static' where possible.
The reserved space for fmt was exactly sufficient for a two-digit value of
MAXLOGNAME - 1.
PR: bin/171815
Submitted by: Jeremy Huddleston Sequoia
MFC after: 1 week
all in one command, with no permissions race.
2. Simplify the rotation logic by cd'ing into the directory, with a test
to make sure that it succeeds.
3. Remove any files numbered higher than entropy_save_num. This helps when
the user reduces the number, and may be useful for other purposes down
the road.
4. Simplify the rotation logic by first testing the common case (it's a
regular file) then testing if something else exists with the same name
using elif. Also switch from using jot to simpler countdown format.
5. Fix logger lines and error messages to be more consistent, and wrap the
code more consistently in the 80 column range. The "not a regular file"
error message was mistakenly wrapped entirely in "quotes" which caused
logger to include line-wrapping whitespace. Change that to wrap only
the variables in quotes, which is both consistent and works better.
6. Update copyright to reflect the fact that changes were made this year.
Parts of 2-4 were taken from etc/periodic/daily/310.accounting
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
The place where the function is called can be reached if object loading
and relocation fails too, in which case obj pointer will be NULL. Do not
call process_nodelete then, or crash will follow.
Pointy hat to: kan
Trying to up the reference from the load loop risks missing dependencies
that have not been loaded yet.
MFC afer: 1 week
Reported by: nox
Reviewd by: kib
This is not strictly required with the current ABI but will be when we
switch to the ARM EABI. The aapcs requires the stack to be 4 byte aligned
at all times and 8 byte aligned when calling a public subroutine where the
current ABI only requires sp to be a multiple of 4.
by John Marino <draco@marino.st>, with the following (edited) commit
message
Date: Sat, 24 Mar 2012 06:40:50 +0100
Subject: [PATCH 1/1] rtld: Implement DT_RUNPATH and -z nodefaultlib
DT_RUNPATH is incorrectly being considered as an alias of DT_RPATH. The
purpose of DT_RUNPATH is to have two different types of rpath: one that
can be overridden by the environment variable LD_LIBRARY_PATH and one that
can't. With the currently implementation, LD_LIBRARY_PATH will always
trump any embedded rpath or runpath tags.
Current path search order by rtld:
==================================
LD_LIBRARY_PATH
DT_RPATH / DT_RUNPATH (always the same)
ldconfig hints file (default: /var/run/ld-elf.so.hints)
/usr/lib
New path search order by rtld:
==============================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file
/usr/lib
The new path search matches how the linux runtime loader works. The other
major added feature is support for linker flag "-z nodefaultlib". When
this flag is passed to the linker, rtld will skip all references to the
standard library search path ("/usr/lib" in this case but it could handle
more color delimited paths) except in DT_RPATH and DT_RUNPATH.
New path search order by rtld with -z nodefaultlib flag set:
============================================================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file (skips all references to /usr/lib)
FreeBSD notes:
- we fixed some bugs which were submitted to DragonFly and merged there
as commit 1ff8a2bd3eb6e5587174c6a983303ea3a79e0002;
- we added LD_LIBRARY_PATH_RPATH environment variable to switch to
the previous behaviour of considering DT_RPATH a synonym for DT_RUNPATH;
- the FreeBSD default search path is /lib:/usr/lib and not /usr/lib.
Reviewed by: kan
MFC after: 1 month
MFC note: flip the ld_library_path_rpath default value for stable/9
relocations are performed before the object's initializer is called.
When dlopen()ing an object, relocate the whole DAG rooted in the
object instead of only relocating the object itself and list of newly
loaded dependencies.
Reversed sequence currently can occur if the same object is a
dependency for both filtee and filter, since filtees are loaded
typically during the relocation processing, when some filter
dependencies might be already loaded but not relocated yet.
Reported and tested by: swills
Reviewed by: kan
MFC after: 1 week
object, and eliminate the pread(2) call as well [1]. Mmap the first
page of the object temporaly, and unmap it on error or last use.
Potentially, this leaves one-page gap between succeeding dlopen(3),
but there are other mmap(2) consumers as well.
Fix several cases were the whole mapping of the object leaked on error.
Use MAP_PREFAULT_READ for mmap(2) calls which map real object pages [2].
Insipired by the patch by: Ian Lepore <freebsd damnhippie dyndns org> [1]
Suggested by: alc [2]
MFC after: 2 weeks
