jkh
39affc3bcc
This is no longer in /stand
1996-06-15 17:49:16 +00:00
jkh
a0d4b3885b
Cosmetic tweaks.
1996-06-15 17:04:48 +00:00
jkh
fcd7b3d355
Make an etc/rc.d directory.
1996-06-15 16:55:28 +00:00
nate
0034509211
Change the 'nep0' lines to 'ep0' since we are very soon to get a working
...
if_ep.c driver for PCCARD stuff. Also,change the 3C589 examples to
reflect what I use to switch between the two connectors.
1996-06-14 21:41:48 +00:00
ache
59e21d0c09
IDE cd fixes:
...
wcd?a is missing
wrong partition number was used for wcd?c
1996-06-07 15:47:15 +00:00
pst
501579ff4d
Eliminate warning message and add big warnings about security holes
1996-05-22 05:43:30 +00:00
ache
92f8f3c6af
Remove obsoleted comment about adjkerntz
1996-05-19 22:30:26 +00:00
nate
44df49b453
Fixed *annoying* error with the weekly files. Do you get these whenver
...
/etc/weekly is run?
Rebuilding locate database: stty: stdin isn't a terminal TERM: Undefined
variable.
'su' apparently runs in root's environment before doing a seteuid(), so
it reads root's .cshrc. The problem lies in the fact that $prompt is
*always* set by the time the command is executed, so you can't protect
your interactive commands from the non-interactive commands by the
normal:
if ($?prompt) then
# interactive stuff here
endif
Set the -f flag (su -fm) which causes it not to read root's .cshrc file,
since there should be no reason to do so for these scripts since
/etc/crontab sets up all of the necessary environment.
1996-05-18 20:30:04 +00:00
jkh
cbb1c43954
freefall's new sendmail.cf file.
...
Submitted by: gpalmer
1996-05-17 07:47:34 +00:00
wosch
39b99669d3
catman -> catman.local
...
This is currently a no-op, because a wisely man did not
enable catman by default (in comments).
1996-05-13 22:05:10 +00:00
jkh
49922e5d26
Neaten up some of the comments in here.
1996-05-13 02:21:16 +00:00
wosch
3da49cdc27
makewhatis -> makewhatis.local
1996-05-12 21:10:34 +00:00
ache
1d2351aee8
Add russian calendar directory
1996-05-10 21:42:58 +00:00
jkh
bef1563d1c
Nuke the nasty cleaning of /var/run after netstart starts - it nukes
...
gated's pid file, for one thing, and is just generally BAD.
1996-05-08 09:25:57 +00:00
peter
45eb654f1a
Add /usr/libdata/stallion for holding the download firmware images.
...
These binary files most definately do not come under /usr/share's
"architecture independent text files" rule... even though these same
images would be used on other processors with pci architectures.
1996-05-04 09:15:11 +00:00
asami
415685ca3c
Bring in ccd support.
...
Entry to create ccd devices.
1996-05-03 05:37:34 +00:00
asami
52ac890686
Bring in ccd support.
...
Call ccdconfig before swapon if /etc/ccd.conf exists.
Obtained from: NetBSD
1996-05-03 05:37:04 +00:00
jkh
d202e9c6fc
Add wcd0 to `all' target. The fate of the IDE CDROM support in 2.2
...
is becoming clearer.. :-)
1996-05-02 09:15:57 +00:00
jkh
f690b2d58e
Highly cosmetic tweaks.
1996-04-30 04:59:57 +00:00
jkh
f871ede69c
Make the invocation of fortune conditional
1996-04-30 04:44:37 +00:00
jkh
19629e274e
Make default /etc/motd (which I will include in the installation) a little
...
more helpful and explanatory to new users. Experienced users always blow
away their default motd's on the first day anyway. :-)
1996-04-27 00:44:22 +00:00
mpp
6f11b21010
Remove the comments that suggest people not turn
...
on accounting and quotas because they don't work.
They seem to work just fine, and the comments generate
too many questions.
1996-04-26 20:18:58 +00:00
nate
d91e0c6ebe
Fix reverse logic bug which caused the ethernet configuration to never work.
1996-04-24 00:04:10 +00:00
pst
818980428a
Add /usr/libexec/sm.bin for smrsh(8)
1996-04-21 19:40:20 +00:00
asami
5cc0c21531
Take out quotes around MOTIFLIB. Clarify comments a bit, most users
...
don't have to touch neither X11BASE nor MOTIFLIB.
Reported by: kmitch@phantasma.bevc.blacksburg.va.us
1996-04-21 08:56:32 +00:00
ache
12363b211c
Exclude devices. Character ones modes changes often and proper names
...
guessing involves too much AI.
1996-04-19 22:28:01 +00:00
ache
599cdbb685
Use -X to be xargs-friendly
...
Check devices too, follow original BSD intention
Find only executable files with s-bits, close PR bin/1022
Reset locale to C to have equal results in any case
1996-04-18 10:34:07 +00:00
ache
2d55190c7f
Back out my MOTIF_STATIC change, it is unnecessary
1996-04-16 11:47:29 +00:00
ache
7dd8453c64
Document MOTIF_STATIC
1996-04-13 06:40:19 +00:00
markm
4bc136affa
Update the Entropy-Gatherer to reflect a better setup - do not
...
use IRQ1, as the keyboard hook already gets this timing info.
Also some slight improvements to the comments.
1996-04-12 14:24:59 +00:00
asami
4c51aabd03
Add commented-out definitions of HAVE_MOTIF and MOTIFLIB.
1996-04-12 09:28:14 +00:00
phk
eb2d09c221
Add another good book to the required reading.
...
make a couple of rules more sensible.
Reviewed by: phk
Submitted by: jmb
1996-04-12 09:16:42 +00:00
asami
0253cf0098
Add phone (1167/udp).
1996-04-09 01:53:58 +00:00
joerg
5d53626f95
Add rplay.
...
Submitted by: Andreas Klemm <andreas@knobel.gun.de>
1996-04-07 01:16:37 +00:00
mpp
be25c38e8e
Use the correct syntax for checking if /etc/rc.firewall exists.
1996-04-06 09:24:48 +00:00
joerg
bb440cc787
Mention the `amd' program version number. The amq(8) man page
...
mentions it as being Sun registered,.
1996-04-04 17:29:26 +00:00
phk
abe01fc216
Add skeleton firewall setup(s). Comments very welcome.
1996-04-03 17:13:59 +00:00
wollman
d2c78b3909
Add /usr/share/examples/perfmon.
1996-03-28 21:17:42 +00:00
wollman
66e5084c48
Provide for creation of /dev/perfmon.
1996-03-26 21:04:54 +00:00
paul
9a19b53b6f
Added creation of /usr/libdata and /usr/libdata/lint
1996-03-24 19:20:02 +00:00
nate
c29bc64893
Install rc.pccard to get PC-CARD support (when available).
1996-03-22 17:28:07 +00:00
adam
4abce83b7a
refer to RFC1918 for private networks, instead of obsoleted RFC1597
1996-03-20 15:29:10 +00:00
jkh
c1e64e481a
Fix Nate's spamming of this file - every backquote needs a matching one.. :-)
1996-03-19 03:48:53 +00:00
nate
aaff9b04b7
Added some comments regarding the apm device, and added support to
...
create the PC-CARD devices.
Note: The APM character special device is named /dev/apm and not apm0 as
was prvioiusly since only one APM device can exist in a system at a time
according to the the APM specifications.
1996-03-18 20:28:27 +00:00
nate
472c26292e
Synchronize relevant changes from the most recent PC-CARD release.
1996-03-18 20:15:24 +00:00
phk
39f6873937
Fix the pccard install.
1996-03-17 20:37:03 +00:00
markm
0bb6d12402
Hack-and-slash out the old 1.1.* stuff.
...
Later commits will bring in 4.4-Lite and 4.4-lite2 stuff.
Reviewed by: bruce, rgrimes
1996-03-17 08:48:20 +00:00
nate
36dc90ccd8
Renamed the relevant PC-Card support files to reflect the newest release.
1996-03-14 18:24:07 +00:00
nate
38eb2b3686
PC-CARD hooks. Someday it will actually enable working code. :)
...
Reviewed by: phk
Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads
I re-wrote alot of this, but the ideas are based on the code from the
most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
phk
34430e67f4
Move "dialer" to gid == 68.
1996-03-12 15:19:31 +00:00