Remove unnecessary `char*` casting for arguments passed to `cget*(3)`, and
deconst `_PATH_PRINTCAP` before passing it to `cget*` via the `printcapdb`
variable.
This unblocks ^/projects/runtime-coverage-v2 from building cleanly on
universe13a.freebsd.org. I suspect the issue was introduced through some
changes to `bsd.*.mk` inclusion on the branch, which I will continue to
investigate/isolate.
MFC after: 1 week
Tested with: clang 8 (arm64)
The Windows virtio driver ignores the advertized seg_max field and
assumes the host can accept up to 67 segments in indirect descriptors,
triggering an assert in the bhyve process.
This brings back r282922 but with a couple of changes:
- It raises the block interface segment limit to 128 instead of 67.
- Linux's virtio driver assumes that the segment limit is no
larger than the ring size. To avoid breaking Linux guests,
raise the VirtIO ring size to 128, and cap the VirtIO segment
limit at ring size - 2 (effectively 126).
Reviewed by: rgrimes, Patrick Mooney <pmooney@pfmooney.com>
Obtained from: Joyent (Linux workaround)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18831
Port the logic used by getifaddrs(3) to handle the case where
NET_RT_IFLIST returns ENOMEM, which can occur if the list size changes
between the buffer allocation and sysctl read.
PR: 195191
Submitted by: Guy Yur <guyyur@gmail.com> (original version)
MFC after: 1 week
It was reported that without #ifdef INET6 around the declaration of "nbuf",
a build would report an unused variable. For some reason, I didn't see that
warning when I did a build, but it seems reasonable to add these #ifdef INET6's.
Submitted by: dmitryluhtionov@gmail.com
MFC after: 1 week
When the CPU Topology was added to bhyve in r332298 the SMBIOS table was
missed, this table passes topology information to the system and was still
using the old concept of each vCPU is a socket with 1 core and 1 thread.
This code did not even try to use the old sysctl information to adjust
this data.
Correct that by building a proper SMBios table, mapping the > 254 cases to
0 per the SMBios 2.6 specification that is claimed by the structure.
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde and/or phk (mentor), jhb (maintainer)
MFC: 3 days
Differential Revision: https://reviews.freebsd.org/D18998
The bhyve acpi MADT table was given a static space of 256 (0x100) bytes,
this is enough space to allow VM_MAXCPU to be 21, this patch changes that
so VM_MAXCPU can be of arbitrary value and not overflow the space by
actually calculating the space needed for the table.
PR: 212782
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde (mentor), jhb (maintainer)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18815
r346190 added support for printing of INET6 addresses for the "-o" option
(all opens) but missed adding support for INET6 addresses for the "-l" option.
This patch adds that support.
PR: 223036
MFC after: 1 week
Parse the R_MIPS_32 and R_MIPS_64 relocations. Both Elf_Rel and
Elf_Rela relocations are handled since O32 MIPS uses Elf_Rel while N64
uses Elf_Rela. Note that R_MIPS_32 is only handled for 32-bit mips
and R_MIPS_64 for 64-bit. N32 is untested.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D19870
points at the "latest" branch and one which points at the "quarterly"
branch. Install the "latest" version unless overridden via the newly
added PKGCONFBRANCH variable.
This does not change user-visible behaviour (assuming said vairable is
not set) but will make it easier to change the defaults in the future --
on stable branches we will want "latest" on x86 but "quarterly" elsewhere.
Discussed with: gjb
MFC after: 3 days
X-MFC: After MFCing this I'll make a direct commit to stable/* to
switch non-x86 architectures to "quarterly".
Previous spellings of my name (NGie, Ngie) weren't my legal spelling. Use Enji
instead for clarity.
While here, remove "All Rights Reserved" from copyrights I "own".
MFC after: 1 week
bhyve was previously using stdin for both reading and writing to the
console, which made it difficult to redirect console output. Use
stdin for reading and stdout for writing. This makes it easier to use
bhyve as a backend for syzkaller.
As a side effect, the change fixes a minor bug which would cause bhyve
to fail with ENOTCAPABLE if configured to use nmdm for com1 and stdio
for com2.
bhyveload already uses separate descriptors, as does the bvmcons driver.
Reviewed by: jhb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19788
Jobs using the @<second> syntax currently only get executed if they exist
when cron is started. The simplest reproducer of this is:
echo '@20 root echo "Hello!"' >> /etc/cron.d/myjob
myjob will get loaded at the next second==0, but this echo job will not
run until cron restarts. These jobs are normally handled in
run_reboot_jobs(), which sets e->lastexit of INTERVAL jobs to the startup
time so they run 'n' seconds later.
Fix this by special-casing TargetTime > 0 in the database load. Preexisting
jobs will be handled at startup during run_reboot_jobs as normal, but if
we've reloaded a database during runtime we'll hit this case and set
e->lastexit to the current time when we process it. They will then run every
'n' seconds from that point, and a full restart of cron is no longer
required to make these jobs work.
Reported by: Juraj Lutter (otis_sk.freebsd.org)
Reviewed by: allanjude, bapt, bjk (earlier version), Juraj Lutter
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19924
This is useful for arm (possibly other arches too) where we want to have
a GENERIC kernel that only include files for the different SoC. Since
multiple SoCs/Board needs the same device we would need to do either :
Include the device in a generic file
Include the device in each file that really needs it
Option 1 works but if someone wants to create a specific kernel config
(which isn't uncommon for embedded system), he will need to add a lots
of nodevice to it.
Option 2 also works but produce a lots of warnings.
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19424
This changes the sender mail address in a similar fashion to how MAILTO may
change the recipient. The default from address remains unchanged.
MFC after: 1 week
Backing out commit pending further discussion on the PCIe version
supported by pseudo (i.e. emulated) devices. See Differential for
details.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D19580
The patch adds support for printing of INET6 callback addresses.
It also adds the #ifdef INET, INET6 as requested by bz@.
PR: 223036
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19839
DEBUG_FLAGS is always added to CFLAGS. This setting appears to be
accidental and came in with r243327.
Reviewed by: anish, emaste, jhb, rgrimes
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19787
r345994 has finally fixed the bug that caused the nfsuserd(8) daemon to
fail when jails were enabled, so delete the BUGS entry from the man page.
PR: 205193
MFC after: 2 weeks
are enabled.
The nfsuserd(8) daemon does not function correctly when jails are enabled,
since localhost gets mapped to another IP address and, as such, the upcall
RPC fails.
This patch fixes the problem by doing a getsockname(2) of a socket mapped
to localhost to find out what the correct address is for the comparison
test with the upcall's from IP address.
This patch also adds INET6 support and the required #ifdef's for INET and
INET6. It now uses INET6 by default for the upcalls, if the kernel has
INET6 support and the daemon is also built with INET6 support.
Tested by: freebsd@danielengel.com (earlier version)
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19218
bhyve's NVMe emulation was transferring Identify data back to the guest
incorrectly causing memory corruptions. These corruptions resulted in
core dumps and other system level errors in the guest.
In their simplest form, NVMe Physical Region Page (PRP) values in
commands indicate which physical pages to use for data transfer. The
first PRP value is not required to be page aligned but does not cross a
page boundary. The second PRP value must be page aligned, does not cross
a page boundary, and need not be contiguous with PRP1.
The code was copying Identify data past the end of PRP1. This happens to
work if PRP1 and PRP2 are physically contiguous but will corrupt guest
memory in unpredictable ways if they are not.
Fix is to copy the Identify data back to the guest piecewise (i.e. for
each PRP entry). Also fix a similarly wrong problem when copying back
Log page data.
Reviewed by: imp (mentor), araujo, jhb, rgrimes, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19695
The NVMe specification defines bits 13:4 of BAR0 as Reserved (i.e. 0x0).
Most drivers do not enforce this, but the Windows NVMe driver does and
will refuse to start the device (i.e. error 10) if any of these bits are
set.
The current BAR size calculation tries to minimize the amount of memory
the device reserves by scaling the BAR size by the maximum number of
queues supported by the device. But unless the device supports a large
number of queue pairs (over 1536), it will reserve too little memory.
The fix is to allocate a minimum of 16K bytes for BAR0.
Tested on Windows Server 2016 and 2019
Reviewed by: imp (mentor), araujo, jhb, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19676
This patch adds a new table begemotSnmpdTransInetTable that uses the
InetAddressType textual convention and can be used to create listening
ports for IPv4, IPv6, zoned IPv6 and based on DNS names. It also supports
future extension beyond UDP by adding a protocol identifier to the table
index. In order to support this gensnmptree had to be modified.
Submitted by: harti
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16654
CXXSTD was added as the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r345203, r345704, r345705
Relnotes: yes
Tested with: make tinderbox
Differential Revision: https://reviews.freebsd.org/D19732
When a review is closed via Phabricator it updates the patch attached to the
review. I downloaded the raw patch from Phabricator, applied it, and repeated
my mistake from r345704 by accident mixing content from D19732 and D19738.
For my own personal sanity, I will try not to mix reviews like this in the
future.
MFC after: 1 month
MFC with: r345706
Approved by: emaste (mentor, implicit)
CXXSTD was added as the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r345203, r345704, r345705
Relnotes: yes
Tested with: make tinderbox
Differential Revision: https://reviews.freebsd.org/D19732
I accidentally committed code from two reviews. I will reintroduce the code to
bsd.progs.mk as part of a separate commit from r345704.
Approved by: emaste (mentor, implicit)
MFC after: 2 months
MFC with: r345704
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19732
and use the space to make the "tps" one character longer.
It makes the iostat(8) output a bit less messed up.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D19710
When processing mtree(5) MANIFEST files, makefs(8) previously threw an
error if it encountered an entry whose "time" attribute contained a
non-zero subsecond component (e.g. time=1551620152.987220000).
Update the handling logic to properly assign the subsecond component if
built with nanosecond support, or silently discard it otherwise.
Also, re-enable the time attribute for the kyua tests.
PR: 194703
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Differential Revision: https://reviews.freebsd.org/D19627
If underlying driver provides no TRIM/UNMAP support and operation fails
due to this reason, state it clearly in verbose mode (default)
instead of writing standard message that may be too cryptic for a user:
trim: ioctl(DIOCGDELETE) failed: nda0: Operation not supported
Now it would write:
trim: nda0: TRIM/UNMAP not supported by driver
But still use previous format including errno value for quiet mode.
Small candelete() function borrowed from diskinfo(8) code.
This function was committed by Alan Somers <asomers@FreeBSD.org>,
so give him some credit.
Reported by: chuck
PCIe devices starting with version 1.1 must set the Role-Based Error
Reporting bit.
And while we're in the neighborhood, generalize the code assigning the
device type.
Reviewed by: imp, araujo, rgrimes
Approved by: imp (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19580
The NVMe Identify Namespace data structure's Number of LBA Formats
(NLBAF) field is a 0's based value (i.e. 0x0 means 1). Since the
emulation only supports a single format, set NLBAF to 0x0, not 1.
Reviewed by: imp, araujo, rgrimes
Approved by: imp (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19579
THRE is always asserted in LSR reads, so REG_IER writes that raise
IER_ETXRDY must also set thre_int_pending.
Reported by: Illumos, according to emaste@
https://twitter.com/ed_maste/status/1106195949087584258
MFC after: 2 weeks
- Sort arguments in synopsis.
- Clarify that it is possible to specify arguments to the command (and that
they could be passed as further arguments to chroot(1)).
- Standardize the description of the flags.
- Improve formatting (e.g., do not use macros in strings specifying width).
- Add examples.
Reviewed by: bcr
Approved by: bcr (doc)
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D19582
It is quite easy make a mistake and run something like this:
trim -f /dev/da0 -r rfile
This would trim the whole device then emit an error on non-existing file -r.
Add another check to prevent this while allowing this form still
for real object names beginning from dash:
trim -f -- /dev/da0 -r rfile
MFC after: 1 week
This unbreaks ezjail and iocell, which get into an endless loop trying to
figure out how many times "freebsd-update install" needs to be called.
PR: 229346
Submitted by: Mike Cole <mcole36@gmail.com>
Approved by: bapt
MFC after: 1 week
