When compiling on -current from r284356 to r285986, the host's
crunchgen can't be used because builds of rescue break when STRIP= was
used to prevent stripping of binaries. Direct commit because -current
code is different. Building 10 on current is common enough to warrnat
a safety belt since this has been broken for two months. The offending
change was never in stable/10.
r281618:
Defeat race with MK_KERBEROS == yes introduced with bootstrap-tools
parallelization work done in r279197
- kerberos5/lib/libroken requires kerberos5/tools/make-roken to build
- kerberos5/tools/asn1_compile, kerberos5/tools/slc, and usr.bin/compile_et
require kerberos5/lib/libroken and kerberos5/lib/libvers
This race is incredibly evident when cross-building sparc64 on
ref10-amd64.freebsd.org
Pointyhat to: ngie
r281823:
Serialize all of _kerberos5_bootstrap_tools to avoid build failures involving
make bootstrap-tools
On the plus side, this also greatly reduces complexity
Pointyhat to: ngie
Reported by: Willem Jan Withagen <wjw@digiware.nl>
Add OBJCOPY to the list of external tools
MFC r272815 (by bapt):
Fix typo
This should fix the build troubles some people have been seeing after
the MFC of r280980 (in r281289). Sorry for the breakage.
Ensure the cross assembler, linker and objcopy are used for the build32
stage, just like for the regular world stage.
Reviewed by: rodrigc, imp, bapt, emaste
Differential Revision: https://reviews.freebsd.org/D2187
1001506 and earlier, since some of the ACPI tools now reach yacc's old
maximum table limit. This should fix the Jenkins buildbot, which
apparently runs 10.1-RELEASE.
r280179:
Add LIB_CXX so that C++ libraries will use CXX to link.
This adds some extra dependencies directly to Makefile.inc1 as
atf is still a prebuild library in stable/10. If r273449 is MFCd
these can come out.
r280180:
Document LIB and LIB_CXX.
libohash doesn't exist on stable/10 (only head)
Not sure why my make buildworld didn't catch any issues
This is a direct commit to stable/10 as a followup to r280340
r279197:
Parallelize building bootstrap-tools
Differential Revision: https://reviews.freebsd.org/D1901
Reviewed by: ian
No serious objections from: imp
r279198:
Fill in missing dependencies for dtrace related tools so the bootstrap-tools
compiles properly on older hosts
Pointyhat to: me
r275907 (by ngie):
Fix building/installing tests when TESTSBASE != /usr/tests
The work in r258233 hardcoded the assumption that tests was the last component
of the tests tree by pushing tests as an explicit prefix for the paths in
BSD.tests.dist and /usr was the prefix for all tests, per BSD.usr.dist and all
of the mtree calls used in Makefile.inc1. This assumption breaks if/when one
provides a custom TESTSBASE "prefix", e.g. TESTSBASE=/mytests .
One thing that r258233 did properly though was remove "/usr/tests" creation
from BSD.usr.dist -- that should have not been there in the first place. That
was an "oops" on my part for the work that was originally committed in r241823
Phabric: D1301
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
Build selective portions of gnu/usr.bin/texinfo as part of build-tools to
ensure that building on a host without makeinfo (i.e. a host where
make delete-old -DWITHOUT_INFO was run), then building with MK_INFO == yes
doesn't manifest in build errors when building info pages
This manifested itself like the following when I was build testing an MFC
change on stable/10:
makeinfo --no-split -I /usr/src/gnu/lib/libregex/doc -I /usr/src/gnu/lib/libregex/doc regex.texi -o regex.info
makeinfo: not found
*** [regex.info] Error code 127
make[6]: stopped in /usr/src/gnu/lib/libregex/doc
1 error
Fix sporadic build failures due to race when running make installworld
when strip gets replaced at install time by adding it to ITOOLS for the
default usr.bin/xinstall STRIP_CMD
This will fix the failure noted in this Jenkins build step:
https://jenkins.freebsd.org/job/Build-UFS-image/688/
This will also fix the issue reported by alfred@ dealing with installing on
targets that differ from build hosts (e.g. installing on i386/i386 when built
on amd64/amd64)
Sponsored by: EMC / Isilon Storage Division
Add makewhatis to ITOOLS if MK_MAN != no
This will fix installation with differing host targets in installworld, so
one can build i386/i386 on an amd64 host, then install to an i386/i386 target
Reported by: alfred
Phabric: D1280
Add a guard against attempting to invoke the buildenv target with -j# as
that silently exits rather than doing something useful.
Sponsored by: DARPA, AFRL
r270991, r271045:
Enhancements related to compiling FDT data...
- Use proper include path for dtc as well as cpp.
- Call cpp with -P to avoid printing line markings.
- Allow FDT_DTS_FILE to be a list, either in the makedtb target, or in a
kernel config file.
- Add the dts include directory to the -I list when doing arm builds.
- Invoke make_dtb with MACHINE defined for cross building friendliness.
- Allow the make_dtb script to work outside of a "make buildkernel"
context by setting MACHINE from uname -m if it's not set already.
- Use sh -c '...' to launch the dtb build scripts with env prepended,
otherwise it tries to treat the env var stuff as a script file name.
Have distrib-dirs, distribution, hier, hierarchy, redistribute, and reinstall
depend on the .MAKE special target
This will allow users to do something like the following to print out the
results of the running the simulated make target with bmake, like some of the
other top-level make targets in Makefile.inc1:
% make -f Makefile.inc1 -n distribution TARGET=i386 TARGET_ARCH=i386
Sponsored by: EMC / Isilon Storage Division
r266851: Add VGAROM 8x8, 8x14 and 8x16 fonts for vt(4)
These are converted from syscons(4) cp437 fonts.
r267306: Add vgarom font source
These are in 'GNU Unifont' format, and are converted from syscons(4)
cp437 fonts.
r267400: Add thin versions of VGAROM 8x8 and 8x16 fonts for vt(4)
These are converted from syscons(4) cp437-thin-8x* fonts.
r267423: Build vt(4) fonts during buildworld
vtfontcvt(8) is now built during buildworld, so can be used as a
bootstrap tool to create vt(4) fonts from source .hex or .bdf font
files, rather than having uuencoded binary fonts in the tree.
r267578: Add glyphs from converted syscons iso* fonts
This consists of the unique glyphs from the following font files in
/usr/share/syscons/fonts:
iso*.fnt ISO-8859-1 West European
iso02*.fnt ISO-8859-2 Central European
iso04*.fnt ISO-8859-4 Baltic
iso05*.fnt ISO-8859-5 Cyrillic
iso07*.fnt ISO-8859-7 Greek
iso08*.fnt ISO-8859-8 Hebrew
iso09*.fnt ISO-8859-9 Turkish
iso15*.fnt ISO-8859-15 West European
r268022: Rename the WITHOUT_VT_SUPPORT knob to WITHOUT_VT
The _SUPPORT knobs have a consistent meaning which differs from the
behaviour controlled by this knob. As the knob is opt-out and has not
appeared in a release the impact should be low.
Approved by: re
Sponsored by: The FreeBSD Foundation
tmconfig compilation when MK_ATM == yes and MK_BSNMP == no
Makefile.inc1:
Always compile gensnmptree with bootstrap-tools when MK_BSNMP != no
instead of depending on a potentially stale tool installed on the build host
sbin/atm/atmconfig/Makefile:
- Always remove oid.h to avoid cluttering up the build/src tree.
- Consolidate all of the RESCUE/MK_BSNMP != no logic under one
conditional to improve readability
- Remove unnecessary ${.OBJDIR} prefixing for oid.h and use ${.TARGET} instead
of spelling out oid.h
- Add a missing DPADD for ${LIBCRYPTO} when compiled MK_BSNMP == yes and
MK_OPENSSL == yes and not compiling for /rescue/rescue
sbin/atm/atmconfig/main.c:
Change #ifndef RESCUE to #ifdef WITH_BSNMP in main.c to make it
clear that we're compiling bsnmp support into atmconfig
The changes to split the ohash code out of m4 into its own library haven't
been MFC'd, so this change was causing an error during bootstrap when
building stable-10.
Submitted by: Dai Sieh <dsieh@dsieh.com>
Pointy hat to: ian
Remove aicasm as a build dependency. It made sense when the ahc and ahd
drivers and their firmware were under active development, but those days
have passed. The firmware now exists in pre-compiled form, no longer
dependent on it's sources or on aicasm. If you wish to rebuild the
firmware from source, the glue still exists under the 'make firmware'
target in sys/modules/aic7xxx.
This also fixes the problem introduced with r257777 et al with building
kernels the old fashioned way in sys/$arch/compile/$CONFIG when the
ahc/ahd drivers were included.
Changes to how the aicasm tool is built. This series of changes results
in the aicasm tool being built as part of the tools stages of world and
kernel builds.
Most of these changes will ultimately be undone when r260401 is MFC'd,
but it will leave in place the new kernel-build-tool machinery (KTMAKE
stuff) in case a new special kernel tool ever comes along.
Use an intermediate target to associate with _SUBDIR which is marked .MAKE
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.
Put the test suite in its own tests.txz distribution file.
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install
Create a mechanism for providing fine-grained build order dependencies
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".
10 has a new flex (2.5.37) and the config.h for unbound has been updated to
take this into account. Alas it breaks source upgrade from any version of
9 because flex is not built as a bootstrap-tools (it would be for older
versions).
That means "libunbound/configlexer.c" is built with the old flex but using
config.h for the new one. Build is thus broken going from 9.* to 10.
Make flex a bootstrap-tools entry if host is less than 1000033 to take into
account the flex update in 10.
Tested on both 9.2-RC3 and 9.3 by myself and dim@. Running buildworld in
head but as both 10 and 11 has the new flex, it will not matter.
Reviewed by: imp
Approved by: des, imp
MFC after: 1 week
Phabric: D554
Run mtree for BSD.tests.dist during make xdev-install, if the tests are
enabled (which they are in the default configuration). Otherwise, it
will fail because ${XDDESTDIR}/usr/include/atf-c does not exist.
Explicitly link libzfs against libavl as it is done in OpenSolaris
(4543:12bb2876a62e). Without this, some third party applications
may break because the lack of AVL related symbols.
FreeBSD base system are not affected because the FreeBSD ZFS command
line tools were all linked against libavl and thus hide the underlying
issue.
PR: bin/183081
Integrate device-tree upstream files into the build process:
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.
Only try to build the static dtb when we're building a static dtb.
Use proper include path for dtc as well as cpp.
Fix syntax errors (missing ; other minor glitches) in existing dts files.
Some xdev fixes:
- if TARGET_ARCH is not defined and XDEV_ARCH is defined then early define
TARGET_ARCH to the valud of XDEV_ARCH: This allow the xdev-build target
to be able to correctly chose the compiler it needs to build
- Allow overwriting XDTP to allow a user to not chose where the xdev env will
live in
- Fix build for gcc only xdev (like ia64) by providing the proper -B to the
toolchain and not relying on gcc being installed already in base
- Fix TOOLS_PREFIX so the generated toolchain has the right default sysroot when
installed intead of getting the DESTDIR one
- Fix supporting DESTDIR
- Also overwrite CXX (needed for cross building c++ libraries with clang) and
CPP (needed to cross build some libraries when gcc is the target default
compiler but gcc is not installed on the building host)
- Prevent XDTP from being a relative path:
XDTP is used as the default SYSROOT for clang and thus should be an absolute path.
- Respect default CC
Fix kern/187712: config(8) does not respect KERNCONFDIR.
The impact of this bug is that you cannot build a kernel if both of the
following are true:
1) The kernel config file is in a non-default location
2) The kernel config file uses the "include" statement from config(5).
usr.sbin/config/main.c
usr.sbin/config/config.8
usr.sbin/config/config.h
usr.sbin/config/lang.l
Added a "-I path" option to config(8). By analogy to cc(1), it adds
an extra path in which the "include" statement will search for
files.
Makefile.inc1
Pass "-I ${KERNCONFDIR}" to config(8).
which can result in different warnings-as-errors in this tool, but these
are all completely harmless.
This is a direct commit to stable/7, stable/8, stable/9 and stable/10,
since this kernel build tool has already been removed in head.
Fix the build so -DNO_TESTS is passed in various phases that don't require
tests in order to build or install. Crucially, don't try to install tests
during the lib32 install phase. This commit supersedes r261081, which fixed
the lib32 install phase problem, but didn't fix other phases.
Submitted by: Garrett Cooper
Reviewed by: sjg
This is a MFC into stable/10 of:
- r257849 Add libatf-c++ to the prebuild libs.
- r257853 Build and install the atf tests.
- r258233 Move all atf directories to the tests mtree.
- r258285 Fix the build of some ATF tests.
This change is "make tinderbox" clean on ref10-amd64 with the default
settings of WITHOUT_TESTS. It is likely for the WITH_TESTS build to
still be broken because not all relevant changes have been merged yet.
This is a MFC of the following into stable/10:
- r257097 Set up the /usr/tests hierarchy.
- r257098 Add missing WITHOUTTESTS file.
- r257100 Add a tests(7) manual page.
- r257105 Disable WITHTESTS= for now.
- r257848 Fix buildworld when WITHTESTS is enabled.
- r257850 Subsume the functionality of MKATF into MKTESTS.
- r257851 Handle the removal of the test suite when WITHOUTTESTS=yes.
- r257852 Install category Kyuafiles from their category directories.
- r258232 Install BSD.tests.mtree when MKTESTS is yes.
Note that building with WITH_TESTS is still broken at this point (and
hence why WITHOUT_TESTS is the set as the default). Subsequent pullups
will fix the remaining issues.
Strip the -pN patch level from the VERSION string which gets encoded into
CTF data. Otherwise FreeBSD Update builds think every kernel file has
changed every time there's a security advisory, since the FreeBSD Update
build code isn't smart enough to look inside CTF data to ignore those
changes.
Approved by: re (gjb)
In r257079, SRCDIR is pointed to ${.CURDIR} when not set. However,
Makefile.inc1 is being called in sub-make's where make(1) would,
by default, implicitly chdir(2) to ${.OBJDIR} before executing any
targets. This would make some targets, like delete-old, when trying
to derive various variables introduced by change r256921 using
``make -f Makefile.inc1'' that also rely on SRCDIR to fail.
This changeset adds an explicit cd ${.CURDIR} before these unwrapped
make calls, making them in line with the other ones that are already
being wrapped with the explicit chdir's.
Approved by: re (hrs)
Stop conflating WITHOUT_CLANG with WITHOUT_CLANG_IS_CC. This allows
bootstrapping a copy of clang without building clang for the base system
which is useful for nanobsd and similar setups. It's still probably
wrong to conflate what is installed as /usr/bin/cc with the selection
of a bootstrap compiler under WITH*_CLANG_IS_CC, but that's for another
day.
Sponsored by: DARPA/AFRL
Approved by: re (gjb)
