This was for pre-7.0 CAM support. Neither the CAM nor the busdma
changes over the years have not been ifdef'd. The code cannot build
on 6.x anymore. Support for 6.4 ended in 2010, so remove them.
mutexes but now are converted to epoch(9) use thread-private epoch_tracker.
Embedding tracker into ifnet(9) or ifnet derived structures creates a non
reentrable function, that will fail miserably if called simultaneously from
two different contexts.
A thread private tracker will provide a single tracker that would allow to
call these functions safely. It doesn't allow nested call, but this is not
expected from compatibility KPIs.
Reviewed by: markj
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.
Convert the utilities that had been using the undocumented
interface to use the new documented interface.
No functional change (as for now the libufs library does not
do inode check-hashes).
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
They only showed up after I redefined LOCKSTAT_ENABLED to 0.
doing_lockprof in mutex.c is a real (but harmless) bug. Should the
value be non-zero it will do checks for lock profiling which would
otherwise be skipped.
state in rwlock.c is a wart from the compiler, the value can't be
used if lock profiling is not enabled.
Sponsored by: The FreeBSD Foundation
Change the assert paths in rm, rw, and sx locks to match the lock
and unlock paths. I did this for mutexes in r306346.
Reported by: Travis Lane <tlane@isilon.com>
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
libnv used fcntl(fd, F_GETFL) to test whether fd is a valid file
descriptor. Aside from being racy, this check requires CAP_FCNTL
rights on fd. Instead, use fcntl(fd, F_GETFD), which does not require
any capability rights.
Also remove some redundant fd_is_valid() checks to avoid extra system
calls; in many cases we were performing this check immediately before
dup()ing the descriptor.
Reviewed by: cem, oshogbo (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17963
In particular, track the current size of the cache and maintain an
estimate of its working set size. This will be used to decide how
much to shrink various caches when the kernel attempts to reclaim
pages. As a secondary effect, it makes statistics aggregation (done
by, e.g., vmstat -z) cheaper since sysctl_vm_zone_stats() no longer
needs to iterate over lists of cached buckets.
Discussed with: alc, glebius, jeff
Tested by: pho (previous version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D16666
processors would benefit from avoiding a function call, but bloating
code. In fact, clang created an uninlined real function for many
object files in the network stack.
- Move epoch_private.h into subr_epoch.c. Code copied exactly, avoiding
any changes, including style(9).
- Remove private copies of critical_enter/exit.
Reviewed by: kib, jtl
Differential Revision: https://reviews.freebsd.org/D17879
Remove restrictions that prevent allocation requests to cross the
boundary between two meta nodes.
Replace the bmu_avail field in meta nodes with a bitmap that identifies
which subtrees have some free memory, and iterate over the nonempty
subtrees only in blst_meta_alloc. If free memory is scarce, this should
make searching for it faster.
Put the code for handling the next-leaf allocation in a separate
function. When taking blocks from the next leaf empties the leaf, be
sure to clear the appropriate bit in its parent, and so on, up to the
least-common ancestor of this leaf and the next.
Eliminate special terminator nodes, and rely instead on the fact that
there is a 0-bit at the end of the bitmask at the root of the tree that
will stop a meta_alloc search, or a next-leaf search, before the search
falls off the end of the tree. Make sure that the tree is big enough to
have space for that 0-bit.
Eliminate special all-free indicators. Lazy initialization of subtrees
stands in the way of having an allocation span a meta-node boundary, so
a subtree of all free blocks is not treated specially. Subtrees of
all-allocated blocks are still recognized by looking at the bitmask at
the root and finding 0.
Don't print all-allocated subtrees. Do print the bitmasks for meta
nodes, when tree-printing.
Submitted by: Doug Moore <dougm@rice.edu>
Reviewed by: alc
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12635
The RISC-V spec defines several performance counter CSRs such as: cycle,
time, instret, hpmcounter(3...31). They are defined to be 64-bits wide
on all RISC-V architectures. On RV64 and RV128 they can be read from a
single CSR. On RV32, additional CSRs (given the suffix "h") are present
which contain the upper 32 bits of these counters, and must be read as
well. (See section 2.8 in the User ISA Spec for full details.)
This change adds macros for reading these values safely on any RISC-V
ISA length. Obviously we aren't supporting anything other than RV64
at the moment, but this ensures we won't need to change how we read
these values if we ever do.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17952
Both to formally document the requirement that this not be called after the
dynamic kenv is setup, and to perhaps help static analyzers figure out
what's going on. While calling init_static_kenv this late isn't fatal, there
are some caveats that the caller should be aware of:
- Late calls are effectively a no-op, as far as default FreeBSD is
concerned, as everything will switch to searching the dynamic kenv once it's
available.
- Each of the kern_getenv calls will leak memory, as it's assumed that
these are searching static environment and allocations will not be made.
As such, this usage is not sensible and should be detected.
There were two main problems here:
1.) sys/dts/Makefile.inc is not included from various */overlays directories
by default, only ../Makefile.inc
2.) When shelling out for DTS/DTSO, cwd != .CURDIR, so enumeration always
failed
These changes allow make test-dts and make test-dtso to function in their
respective directories.
Reviewed by: manu
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17961
Include evdev support and drivers in the amd64 and i386 GENERIC and MINIMAL
kernels. Evdev is used by X and wayland to handle input devices, and this
change, together with upcomming changes in ports will make us handle input
devices better in graphical UIs.
Reviewed by: wulf, bapt, imp
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D17912
We need to know actual value for the standard extended features before
ifuncs are resolved.
Reported and tested by: madpilot
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
A kernel panic can occur if the cxgbe interface is DOWN
when activating netmap. This patch prevents the driver
from freeing up cxgbe netmap resources when they have not
been allocated.
Submitted by: Nicolas Witkowski <nwitkowski@verisign.com>
Reviewed by: np
MFC after: 1 week
Sponsored by: Verisign, Inc.
Differential Revision: https://reviews.freebsd.org/D17802
The vlan interfaces can be created from vnet jails, it seems, so it
sounds logical to allow pcp configuration as well.
Reviewed by: bz, hselasky (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17777
Now an interface name can be specified for nptv6 instance instead of
ext_prefix. The module will track if_addr_ext events and when suitable
IPv6 address will be added to specified interface, it will be configured
as external prefix. When address disappears instance becomes unusable,
i.e. it doesn't match any packets.
Reviewed by: 0mp (manpages)
Tested by: Dries Michiels <driesm dot michiels gmail com>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17765
Correct boneheaded assertion I added in r339501. Mea culpa.
The intent is to notice when an M_WAITOK zone allocation would fail during
netdump, not to prevent all use of mbufs during netdump.
Reviewed by: markj
X-MFC-With: r339501
Differential Revision: https://reviews.freebsd.org/D17957
This also removes a lot of #ifdefs and cleans up a warning when the
AUDIT kernel option is defined, but neither KDTRACE_HOOKS nor MAC are.
Reported and tested by: danger
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The path must have a tail which does not escape starting/topping
directory. The documentation will come shortly, see the man pages
commit message for the reason of separate commit.
Reviewed by: jilles (previous version)
Discussed with: emaste
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17714
r336984 exposed the bug fixed in r340241, leading to the initial revert
while the bug was being hunted down. Now that the bug is fixed, we
can revert the revert.
Discussed with: alc
MFC after: 3 days
Such fragments are obviously invalid, and when processed may end up
violating the sort order (by offset) of fragments of a given packet.
This doesn't appear to be exploitable, however.
Reviewed by: emaste
Discussed with: jtl
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17914
Maxmem is the highest address for physical memory in the system. It's
measured in pages which, since max() returns a u_int, should allow for up to
2^44 bytes of memory addressable by the system. However, on POWER9 systems
at least, memory addressed by additional socketed CPUs begins at addresses
far above the 2^44 mark, causing issues with memory accesses and DMA, when
memory is addressed on the auxiliary CPUs. Use the MAX() macro instead,
which doesn't convert arguments, so retains Maxmem and all calculations as
its defined long type (64-bit on powerpc64), keeping the maximum address
correct.
Submitted by: mmacy
This covers scenario when ARC may not shrink as fast as it could:
1. arc_size < arc_c and arc_adjust() does not evict anything, returning
zero to arc_reclaim_thread();
2. arc_available_memory() reports memory pressure, which can not be
satisfied by arc_kmem_reap_now();
3. arc_shrink() reduces arc_c and calls arc_adjust(), return of which is
ignored;
4. even if the last arc_adjust() could not satisfy arc_size < arc_c,
arc_reclaim_thread() will still go to sleep, since the first one
returned zero.
Reviewed by: allanjude, markj, sef
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D17927
The first packet after the ring is initialized was never
completed as isc_txd_credits_update() would not include it in the
count of completed packets. This caused netmap to never complete
a batch. See PR 233022 for more details.
PR: 233022
Reported by: lev
Reviewed by: lev
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17931
r254889 added tcp_state_change() as a centralized place to log state
changes in TCP connections for DTrace. r294869 and r296881 took
advantage of this central location to manage per-state counters.
However, TOE sockets were still performing some (but not all) state
change updates via direct assignments to t_state. This resulted in
state counters underflowing when TOE was in use. Fix by using
tcp_state_change() when changing a TOE connection's state.
Reviewed by: np, markj
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17915
As dev_t is now a 64-bit integer, it requires special handling as a
system call argument. 64-bit arguments are split between two 64-bit
integers due to the way arguments are promoted to allow reuse of most
system call implementations. They must be reassembled before use.
Further, 64-bit arguments at an odd offset (counting from zero) are
padded and slid to the next slot on powerpc and mips. Fix the
non-COMPAT11 system call by adding a freebsd32_mknodat() and
appropriately padded declerations.
The COMPAT11 system calls are fully compatible with the 64-bit
implementations so remove the freebsd32_ versions.
Use uint32_t consistently as the type of the old dev_t. This matches
the old definition.
Reviewed by: kib
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17928
r306041 changed ld invocations for converting binary files to kernel
ELF objects to pass -m, but missed bespoke ld invocations in a pair of
arm file configs (one of which has since been removed).
This is needed to support some external toolchains and lld.
Sponsored by: The FreeBSD Foundation
Bugs range from failure to update after changing syscall implementaion
names to using the wrong name. Somewhat confusingly, the name in
capabilities.conf is exactly the string that appears in syscalls.master,
not the name with a COMPAT* prefix which is the actual function name.
Found while making a change to use the default capabilities.conf.
Fixes: r335177, r336980, r340272, r340274, others
Reviewed by: kib, emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17925
Summary: When compiling for ELFv2, it is necessary to adjust the offset to
get_spr and factor in the function prologue to ensure the correct instruction is
being edited.
Test Plan:
Before:
```
db> show spr 110
KDB: reentering
KDB: stack backtrace:
0xc008000020fb96e0: at 0xc000000002bb2e34 = kdb_backtrace+0x68
0xc008000020fb97f0: at 0xc000000002bb3798 = kdb_reenter+0x54
0xc008000020fb9860: at 0xc000000002f87090 = trap+0x4e4
0xc008000020fb9990: at 0xc000000002f78a60 = powerpc_interrupt+0x110
0xc008000020fb9a20: kernel trap 0xe40 by 0xc000000002401978 = get_spr+0x8: srr1=0x9000000000001032
r1=0xc008000020fb9cd0 cr=0x80009438 xer=0x20040000 ctr=0xc000000002f7b40c r2=0xc0000000037fd000
saved LR(0xfffffffffffffffb) is invalid.
```
After:
```
db> show spr 110
SPR 272(110): c000000003cae900
```
Submitted by: git_bdragon.rtk0.net
Differential Revision: https://reviews.freebsd.org/D17813
It seems this tag is causing problems on POWER9 systems. Since no POWER9 user
has encountered the problem fixed by r339589 just restrict it to POWER8 for now.
A better fix will likely be to update powerpc/busdma_machdep.c to handle the
window correctly.
Reported by: mmacy, others
