* iwm_poll_bit() returns 1 on success and 0 on failure, whereas
iwl_poll_bit() in Linux's iwlwifi returns >= 0 on success and < 0 on
failure.
* Because of the wrong iwm_poll_bit return code check, no warning was
printed if tx DMA stopping failed.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7371
* Makes the TX DMA stopping more similar to Linux code, and potentially
a bit faster. Also, output an error message when TX DMA idling fails.
Taken-From: Linux iwlwifi
Tested:
* AC3165, STA mode
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 2ee486ddff973ac552ff787c17e8d83e8ae0f24c
Differential Revision: https://reviews.freebsd.org/D7325
When building a Tx Command for management frames, we are lacking
a check for action frames, for which we should set a different
pm_timeout. This cause the fw to stay awake for 100TU after each
such frame is transmitted, resulting an excessive power consumption.
Taken-From: Linux iwlwifi (git b084a35663c3f1f7)
Approved by: adrian (mentor)
Obtained from: Linux git b084a35663c3f1f7de1c45c4ae3006864c940fe7
Obtained from: DragonFlyBSD git ba00f0e3ae873d6f0d5743e22c3ebc49c44dfdac
Differential Revision: https://reviews.freebsd.org/D7324
The PROT_REQUIRE flag in should be set for data frames above a certain
length, but we were setting it for !data frames above a certain length,
which makes no sense at all.
Taken-From: OpenBSD, Linux iwlwifi
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD git 8cc03924a36c572c2908e659e624f44636dc2b33
Differential Revision: https://reviews.freebsd.org/D7323
We also need to consider the size of large firmware commands in iwm_alloc_tx_ring(),
in the dma tag creation, when qid == IWM_MVM_CMD_QUEUE. The old code apparently
only allocated a 2KB (MCLBYTES) sized buffer when it actually expected 4KB.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D6824
(Together with other iwm(4) memory leak fixes) Memory leakage in M_DEVBUF
is now at ca. 2KB for each iwm(4) module load/unload cycle.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git eaf551a1d464c643e98ce5781971dd32124e9af1
Differential Revision: https://reviews.freebsd.org/D6819
* When bus_dmamem_alloc is used, the bus_dmamap_t is usually set to NULL, so
we were never actually freeing any dma memory allocations done via
iwm_dma_contig_alloc(). So we should check dma->vaddr instead of dma->map here.
* Also, the dmamap is actually supposed to be invalidated as part of
bus_dmamem_free(), so bus_dmamap_destroy() is never needed here.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re (gjb)
Obtained from: DragonflyBSD git ef2b29a7ba6ca8a9d2c82ab591c0622227ff84cb
ic_macaddr is only used for the initial mac address provided by NVM. We should
rather use vap->iv_myaddr when vap != NULL, to allow the MAC address
to be changed later with ifconfig(8).
Submitted by: Imre Vadasz <imre@vdsz.com>
Reviewed by: avos
Approved by: re (gjb)
Obtained from: DragonflyBSD git 4aee7a78275676d22d14c04177bd0c9377d91478
Differential Revision: https://reviews.freebsd.org/D6743
When allocating a new mbuf or bus_dmamap_load()-ing it fails,
we can just keep the old mbuf since we are dropping that packet anyway.
Instead of doing bus_dmamap_create() and bus_dmamap_destroy() all the time,
create an extra bus_dmamap_t which we can use to safely try
bus_dmamap_load()-ing the new mbuf. On success we just swap the spare
bus_dmamap_t with the data->map of that ring entry.
Tested:
Tested with Intel AC7260, verified with vmstat -m that new kernel no
longer visibly leaks memory from the M_DEVBUF malloc type.
Before, leakage was 1KB every few seconds while ping(8)-ing over the wlan
connection.
Submitted by: Imre Vadasz <imre@vdsz.com>
Approved by: re@
Obtained from: DragonflyBSD.git cc440b26818b5dfdd9af504d71c1b0e6522b53ef
Differential Revision: https://reviews.freebsd.org/D6742
* The "if (!data->valid_tx_ant || !data->valid_rx_ant) {" check was getting
triggered with a 3165 chipset.
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 3655dfb6fc311fc83e5ce8370dd91b4cd4a37991
Move some declarations to if_iwmreg.h.
Remove iwm_fw_alive(); just call iwm_post_alive() directly.
Simplify iwm_mvm_add_sta().
Return timeout error from iwm_apm_init().
Print a message when init (i.e. boot) firmware fails to load.
Remove some commented-out code which wouldn't compile anyway.
Move iwm_mvm_tx_fifo to if_iwmreg.h to match better where Linux puts it.
Taken-From: OpenBSD (if_iwm.c r1.80 and if_iwmreg.h r1.11)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD 29fcb331e5620ae145a6ab9cdda830e22fff626a
if_iwm - GC some dead code, left by a partially applied OpenBSD change.
Taken-From: OpenBSD (if_iwm.c r1.69)
Submitted by: Imre Vadasz <imre@vdsz.com>
Obtained from: DragonflyBSD git 07dfed32ea39b980b0b80d27ff938e7c3ca4c0b5
The Linux driver sets the rate_n_flags regardless of whether it's being
sent using firmware rate control or local rate control. This includes
the antenna configuration.
Thanks to Kyle Evans <kevans91@ksu.edu> for pointing this out to me
and doing some investigation/testing on his end.
Tested:
* Intel 7260 STA, 2G and 5G networks
Introduced in r298594. There is no path before the 'vap == NULL' check where
vap is not already dereferenced.
Reported by: Coverity
CID: 1354979
Sponsored by: EMC / Isilon Storage Division
I'm seeing 5GHz association work but data not work until the rate drops,
so I need way more information about what's being programmed into the
transmit descriptors.
Tested:
* 7260AC, STA mode
Always print out the firmware panic info before restarting; don't
put it behind IWM_DEBUG.
Submitted by: bapt
Differential Revision: https://reviews.freebsd.org/D6081
The iwm firmware has separate commands for add, modify and delete for
various things (mac, phy context, etc.) The openbsd driver has a habit
of just completely resetting the NIC each time, which is technically
mostly okay (as long as the reset doesn't actually fail!) but it means
a lot of the code is doing ADD when it should do MODIFY.
The firmware responds in kind - it just asserts.
This fixes auth attempts that occur after the NIC has been already
configured.
(I'm sure there are more instances of this!)
Tested:
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf1400000-0xf1401fff irq 17 at device 0.0 on pci2
iwm0: revision: 0x140, firmware 25.228 (API ver. 9)
.. STA mode.
Submitted by: Masachika ISHIZUKA <ish@amail.plala.or.jp>
we want to use it.
The rate table was being initialised in low->high, but the link quality
table was being initialised high->low. So, when we did a lookup, we
would get the indexes wrong.
This started by a patch from dragonflybsd which reversed how the ni->in_ridx[]
array is being used; I'd rather it all be consistent. So, this is consistent.
Inspired by: what I did to iwn(4) a while ago
Inspired by: DragonflyBSD; <imre@vdsz.com>
This optimization is not proper (and causes kernel panic),
since driver checks fw_status to optimize away parsing stage
if it was already done.
Reported by: dchagin
iwn(4) / wpi(4) works in the same way
(read_firmware() -> hw_init() -> firmware_put())
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4766
- Simplify defragmentation code.
- Use proper number of dma segments for data.
Approved by: adrian (mentor)
Obtained from: DragonFlyBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D4754
- Change order of data in if_iwmvar.h
(like it is in other drivers: defines, data structures,
vap/node structures, softc struct and locks); use indentation.
- Fix IWM_LOCK(_sc) / IWM_UNLOCK(_sc) macro.
- Add IWM_LOCK_INIT / DESTROY(sc) + fix mtx_init() usage.
- Wrap iwm_node casts into IWM_NODE() macro.
- Drop some fields:
* wt_hwqueue from Tx radiotap header;
* macaddr[6] from iwm_vap;
Approved by: adrian
Differential Revision: https://reviews.freebsd.org/D4753
This doesn't free the mbuf upon error; the driver ic_raw_xmit method is still
doing that.
Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3774
connectivity interact with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
