All supported FreeBSD build host versions have backtrace.h, so we can
just eliminate that test. For futimes() we can test the compiler's
built-in __FreeBSD__ major version rather than relying on including
osreldate.h. This should reduce the frequency with which Clang gets
rebuilt when building world.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
This effectively reverts r335449 and changes the previous MK_LLD_IS_LD
to a MK_LLD_BOOTSTRAP check. If !TOOLS_PREFIX then these sources are
always built for llvm-objdump, lld, and llvm-cov. When TOOLS_PREFIX
is set then they are only needed if lld is being bootstrapped.
Reported by: dim
Pointyhat to: bdrewery
Sponsored by: Dell EMC
This makes it possible, through src.conf(5) settings, to select which
LLVM targets you want to build during buildworld. The current list is:
* (WITH|WITHOUT)_LLVM_TARGET_AARCH64
* (WITH|WITHOUT)_LLVM_TARGET_ARM
* (WITH|WITHOUT)_LLVM_TARGET_MIPS
* (WITH|WITHOUT)_LLVM_TARGET_POWERPC
* (WITH|WITHOUT)_LLVM_TARGET_SPARC
* (WITH|WITHOUT)_LLVM_TARGET_X86
To not influence anything right now, all of these are on by default, in
situations where clang is enabled.
Selectively turning a few targets off manually should work. Turning on
only one target should work too, even if that target does not correspond
to the build architecture. (In that case, LLVM_NATIVE_ARCH will not be
defined, and you can only use the resulting clang executable for
cross-compiling.)
I performed a few measurements on one of the FreeBSD.org reference
machines, building clang from scratch, with all targets enabled, and
with only the x86 target enabled. The latter was ~12% faster in real
time (on a 32-core box), and ~14% faster in user time. For a full
buildworld the difference will probably be less pronounced, though.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11077
lld always needs these DWARF sources, as well as other default and extra
tools. XDL seems to be the best fit list.
Remove MK_LLD_IS_LD check from SRCS_MIW which is now reduced to just a
few files for llvm-objdump.
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15915
MK_LLD is for the installed lld while MK_LLD_BOOTSTRAP is for the build
tool. For WITH_SYSTEM_LINKER it is necesarry to separate the logic of
these two. When building libllvm TOOLS_PREFIX will be defined and
MK_LLD_BOOTSTRAP should be checked instead.
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15837
A non-alloc note section should not have a PT_NOTE program header.
Found while linking ghc (Haskell compiler) with lld on FreeBSD. Haskell
emits a .debug-ghc-link-info note section (as the name suggests, it
contains link info) as a SHT_NOTE section without SHF_ALLOC set.
For this case ld.bfd does not emit a PT_NOTE segment for
.debug-ghc-link-info. lld previously emitted a PT_NOTE with p_vaddr = 0
and FreeBSD's rtld segfaulted when trying to parse a note at address 0.
LLVM PR: https://llvm.org/pr37361
LLVM review: https://reviews.llvm.org/D46623
PR: 226872
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
EFLAGS copy that lives out of a basic block!" errors on i386.
Pull in r325446 from upstream clang trunk (by me):
[X86] Add 'sahf' CPU feature to frontend
Summary:
Make clang accept `-msahf` (and `-mno-sahf`) flags to activate the
`+sahf` feature for the backend, for bug 36028 (Incorrect use of
pushf/popf enables/disables interrupts on amd64 kernels). This was
originally submitted in bug 36037 by Jonathan Looney
<jonlooney@gmail.com>.
As described there, GCC also uses `-msahf` for this feature, and the
backend already recognizes the `+sahf` feature. All that is needed is
to teach clang to pass this on to the backend.
The mapping of feature support onto CPUs may not be complete; rather,
it was chosen to match LLVM's idea of which CPUs support this feature
(see lib/Target/X86/X86.td).
I also updated the affected test case (CodeGen/attr-target-x86.c) to
match the emitted output.
Reviewers: craig.topper, coby, efriedma, rsmith
Reviewed By: craig.topper
Subscribers: emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D43394
Pull in r328944 from upstream llvm trunk (by Chandler Carruth):
[x86] Expose more of the condition conversion routines in the public
API for X86's instruction information. I've now got a second patch
under review that needs these same APIs. This bit is nicely
orthogonal and obvious, so landing it. NFC.
Pull in r329414 from upstream llvm trunk (by Craig Topper):
[X86] Merge itineraries for CLC, CMC, and STC.
These are very simple flag setting instructions that appear to only
be a single uop. They're unlikely to need this separation.
Pull in r329657 from upstream llvm trunk (by Chandler Carruth):
[x86] Introduce a pass to begin more systematically fixing PR36028
and similar issues.
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the
necessary state in a GPR. In the vast majority of cases, these uses
are cmovCC and jCC instructions. For such cases, we can very easily
save and restore the necessary information by simply inserting a
setCC into a GPR where the original flags are live, and then testing
that GPR directly to feed the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the
flags. This patch handles the vast majority of cases that seem to
come up in practice: adc, adcx, adox, rcl, and rcr; all without
taking advantage of partially preserved EFLAGS as LLVM doesn't
currently model that at all.
There are a large number of operations that techinaclly observe
EFLAGS currently but shouldn't in this case -- they typically are
using DF. Currently, they will not be handled by this approach.
However, I have never seen this issue come up in practice. It is
already pretty rare to have these patterns come up in practical code
with LLVM. I had to resort to writing MIR tests to cover most of the
logic in this pass already. I suspect even with its current amount
of coverage of arithmetic users of EFLAGS it will be a significant
improvement over the current use of pushf/popf. It will also produce
substantially faster code in most of the common patterns.
This patch also removes all of the old lowering for EFLAGS copies,
and the hack that forced us to use a frame pointer when EFLAGS copies
were found anywhere in a function so that the dynamic stack
adjustment wasn't a problem. None of this is needed as we now lower
all of these copies directly in MI and without require stack
adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things
tripping me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
Pull in r329673 from upstream llvm trunk (by Chandler Carruth):
[x86] Model the direction flag (DF) separately from the rest of
EFLAGS.
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting
EFLAGS actually modify DF (other than things like popf) and so this
needlessly creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD,
CLD, and the whole-flags writes (WRFLAGS and POPF) need to model
this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the
correct datatype to hold X86 registers, and I've corrected that as
necessary here.
Differential Revision: https://reviews.llvm.org/D45154
Pull in r330264 from upstream llvm trunk (by Chandler Carruth):
[x86] Fix PR37100 by teaching the EFLAGS copy lowering to rewrite
uses across basic blocks in the limited cases where it is very
straight forward to do so.
This will also be useful for other places where we do some limited
EFLAGS propagation across CFG edges and need to handle copy rewrites
afterward. I think this is rapidly approaching the maximum we can and
should be doing here. Everything else begins to require either heroic
analysis to prove how to do PHI insertion manually, or somehow
managing arbitrary PHI-ing of EFLAGS with general PHI insertion.
Neither of these seem at all promising so if those cases come up,
we'll almost certainly need to rewrite the parts of LLVM that produce
those patterns.
We do now require dominator trees in order to reliably diagnose
patterns that would require PHI nodes. This is a bit unfortunate but
it seems better than the completely mysterious crash we would get
otherwise.
Differential Revision: https://reviews.llvm.org/D45673
Together, these should ensure clang does not use pushf/popf sequences to
save and restore flags, avoiding problems with unrelated flags (such as
the interrupt flag) being restored unexpectedly.
Requested by: jtl
PR: 225330
MFC after: 1 week
This will faciliate a WITH_SYSTEM_LINKER option.
Reviewed by: dim
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15110
[X86] Add 'sahf' CPU feature to frontend
Summary:
Make clang accept `-msahf` (and `-mno-sahf`) flags to activate the
`+sahf` feature for the backend, for bug 36028 (Incorrect use of
pushf/popf enables/disables interrupts on amd64 kernels). This was
originally submitted in bug 36037 by Jonathan Looney
<jonlooney@gmail.com>.
As described there, GCC also uses `-msahf` for this feature, and the
backend already recognizes the `+sahf` feature. All that is needed is
to teach clang to pass this on to the backend.
The mapping of feature support onto CPUs may not be complete; rather,
it was chosen to match LLVM's idea of which CPUs support this feature
(see lib/Target/X86/X86.td).
I also updated the affected test case (CodeGen/attr-target-x86.c) to
match the emitted output.
Reviewers: craig.topper, coby, efriedma, rsmith
Reviewed By: craig.topper
Subscribers: emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D43394
Pull in r328944 from upstream llvm trunk (by Chandler Carruth):
[x86] Expose more of the condition conversion routines in the public
API for X86's instruction information. I've now got a second patch
under review that needs these same APIs. This bit is nicely
orthogonal and obvious, so landing it. NFC.
Pull in r329414 from upstream llvm trunk (by Craig Topper):
[X86] Merge itineraries for CLC, CMC, and STC.
These are very simple flag setting instructions that appear to only
be a single uop. They're unlikely to need this separation.
Pull in r329657 from upstream llvm trunk (by Chandler Carruth):
[x86] Introduce a pass to begin more systematically fixing PR36028
and similar issues.
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the
necessary state in a GPR. In the vast majority of cases, these uses
are cmovCC and jCC instructions. For such cases, we can very easily
save and restore the necessary information by simply inserting a
setCC into a GPR where the original flags are live, and then testing
that GPR directly to feed the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the
flags. This patch handles the vast majority of cases that seem to
come up in practice: adc, adcx, adox, rcl, and rcr; all without
taking advantage of partially preserved EFLAGS as LLVM doesn't
currently model that at all.
There are a large number of operations that techinaclly observe
EFLAGS currently but shouldn't in this case -- they typically are
using DF. Currently, they will not be handled by this approach.
However, I have never seen this issue come up in practice. It is
already pretty rare to have these patterns come up in practical code
with LLVM. I had to resort to writing MIR tests to cover most of the
logic in this pass already. I suspect even with its current amount
of coverage of arithmetic users of EFLAGS it will be a significant
improvement over the current use of pushf/popf. It will also produce
substantially faster code in most of the common patterns.
This patch also removes all of the old lowering for EFLAGS copies,
and the hack that forced us to use a frame pointer when EFLAGS copies
were found anywhere in a function so that the dynamic stack
adjustment wasn't a problem. None of this is needed as we now lower
all of these copies directly in MI and without require stack
adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things
tripping me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
Pull in r329673 from upstream llvm trunk (by Chandler Carruth):
[x86] Model the direction flag (DF) separately from the rest of
EFLAGS.
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting
EFLAGS actually modify DF (other than things like popf) and so this
needlessly creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD,
CLD, and the whole-flags writes (WRFLAGS and POPF) need to model
this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the
correct datatype to hold X86 registers, and I've corrected that as
necessary here.
Differential Revision: https://reviews.llvm.org/D45154
Together, these should ensure clang does not use pushf/popf sequences to
save and restore flags, avoiding problems with unrelated flags (such as
the interrupt flag) being restored unexpectedly.
Requested by: jtl
PR: 225330
MFC after: 1 week
Introduce WITH_/WITHOUT_LLVM_COV to match GCC's WITH_/WITHOUT_GCOV.
It is intended to provide a superset of the interface and functionality
of gcov.
It is enabled by default when building Clang, similarly to gcov and GCC.
This change moves one file in libllvm to be compiled unconditionally.
Previously it was included only when WITH_CLANG_EXTRAS was set, but the
complexity of a new special case for (CLANG_EXTRAS | LLVM_COV) is not
worth avoiding a tiny increase in build time.
Reviewed by: dim, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D142645
-Wno-error=tautological-constant-compare again (this flag is now out of
-Wextra after upstream https://reviews.llvm.org/rL322901). Otherwise
the MK_SYSTEM_COMPILER logic will not build a cross-tools compiler.
Reported by: jpaetzel, tuexen, Stefan Hagen
6.0.0 (branches/release_60 r324090).
This introduces retpoline support, with the -mretpoline flag. The
upstream initial commit message (r323155 by Chandler Carruth) contains
quite a bit of explanation. Quoting:
Introduce the "retpoline" x86 mitigation technique for variant #2 of
the speculative execution vulnerabilities disclosed today,
specifically identified by CVE-2017-5715, "Branch Target Injection",
and is one of the two halves to Spectre.
Summary:
First, we need to explain the core of the vulnerability. Note that
this is a very incomplete description, please see the Project Zero
blog post for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative
execution of the processor to some "gadget" of executable code by
poisoning the prediction of indirect branches with the address of
that gadget. The gadget in turn contains an operation that provides a
side channel for reading data. Most commonly, this will look like a
load of secret data followed by a branch on the loaded value and then
a load of some predictable cache line. The attacker then uses timing
of the processors cache to determine which direction the branch took
*in the speculative execution*, and in turn what one bit of the
loaded value was. Due to the nature of these timing side channels and
the branch predictor on Intel processors, this allows an attacker to
leak data only accessible to a privileged domain (like the kernel)
back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In
many cases, the compiler can simply use directed conditional branches
and a small search tree. LLVM already has support for lowering
switches in this way and the first step of this patch is to disable
jump-table lowering of switches and introduce a pass to rewrite
explicit indirectbr sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as a
trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures
the processor predicts the return to go to a controlled, known
location. The retpoline then "smashes" the return address pushed onto
the stack by the call with the desired target of the original
indirect call. The result is a predicted return to the next
instruction after a call (which can be used to trap speculative
execution within an infinite loop) and an actual indirect branch to
an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this
device. For 32-bit ABIs there isn't a guaranteed scratch register
and so several different retpoline variants are introduced to use a
scratch register if one is available in the calling convention and to
otherwise use direct stack push/pop sequences to pass the target
address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the
retpoline thunk by the compiler to allow for custom thunks if users
want them. These are particularly useful in environments like
kernels that routinely do hot-patching on boot and want to hot-patch
their thunk to different code sequences. They can write this custom
thunk and use `-mretpoline-external-thunk` *in addition* to
`-mretpoline`. In this case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are
from precompiled runtimes (such as crt0.o and similar). The ones we
have found are not really attackable, and so we have not focused on
them here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z
retpolineplt` (or use similar functionality from some other linker).
We strongly recommend also using `-z now` as non-lazy binding allows
the retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typic al workloads, and relatively minor hits (approximately
2%) even for extremely syscall-heavy applications. This is largely
due to the small number of indirect branches that occur in
performance sensitive paths of the kernel.
When using these patches on statically linked applications,
especially C++ applications, you should expect to see a much more
dramatic performance hit. For microbenchmarks that are switch,
indirect-, or virtual-call heavy we have seen overheads ranging from
10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically
reduce the impact of hot indirect calls (by speculatively promoting
them to direct calls) and allow optimized search trees to be used to
lower switches. If you need to deploy these techniques in C++
applications, we *strongly* recommend that you ensure all hot call
targets are statically linked (avoiding PLT indirection) and use both
PGO and ThinLTO. Well tuned servers using all of these techniques saw
5% - 10% overhead from the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality
available as soon as possible. Happy for more code review, but we'd
really like to get these patches landed and backported ASAP for
obvious reasons. We're planning to backport this to both 6.0 and 5.0
release streams and get a 5.0 release with just this cherry picked
ASAP for distros and vendors.
This patch is the work of a number of people over the past month:
Eric, Reid, Rui, and myself. I'm mailing it out as a single commit
due to the time sensitive nature of landing this and the need to
backport it. Huge thanks to everyone who helped out here, and
everyone at Intel who helped out in discussions about how to craft
this. Also, credit goes to Paul Turner (at Google, but not an LLVM
contributor) for much of the underlying retpoline design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
MFC after: 3 months
X-MFC-With: r327952
PR: 224669
Allow usage of X86-prefixes as separate instrs.
Differential Revision: https://reviews.llvm.org/D42102
This should fix parse errors when x86 prefixes (such as 'lock' and
'rep') are followed by various non-mnemonic tokens, e.g. comments, .byte
directives and labels.
PR: 224669,225054
This allows the _SKIP_DEPEND optimization to work, avoiding reading
the files when not needed. It also fixes META_MODE incorrectly
reading these files when not needed.
Sponsored by: Dell EMC Isilon
The Makefile.inc1 TARGET_TRIPLE is for specifying which -target is used
during the build of world.
MFC after: 2 weeks
Reviewed by: dim, imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12792
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
the upstream release_50 branch. This corresponds to 5.0.0 rc4.
As of this version, the cad/stepcode port should now compile in a more
reasonable time on i386 (see bug 221836 for more information).
PR: 221836
MFC after: 2 months
X-MFC-with: r321369
the upstream release_50 branch.
As of this version, lib/msun's trig test should also work correctly
again (see bug 220989 for more information).
PR: 220989
MFC after: 2 months
X-MFC-with: r321369
- Include debug symbols in static libraries. This permits binaries
to include debug symbols for functions obtained from static libraries.
- Permit the C/C++ compiler flags added for MK_DEBUG_FILES to be
overridden by setting DEBUG_FILES_CFLAGS. Use this to limit the debug
information for llvm libraries and binaries.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12025
The files are only ever generated to .OBJDIR, not to WORLDTMP (as a
sysroot) and are only ever included from a compilation. So using
a beforebuild target here removes the file before the compilation
tries to include it.
MFC after: 2 months
X-MFC-With: r321369
linking the lldb executable in some cases. In particular, when the
-ffunction-sections -fdata-sections options are turned off, or
ineffective.
Reported by: Shawn Webb, Mark Millard
MFC after: 2 months
X-MFC-With: r308421
For some reason, we have been inserting the ABI specification into the
middle of the target triple, when building LLVM, like so:
armv6-gnueabi-freebsd12.0
This is the wrong way around. LLVM even auto-canonicalizes it to:
armv6--freebsd12.0-gnueabi
Let's do this the right way in llvm.build.mk instead. While here,
define a proper VENDOR macro which can be overridden easily.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10846
properly anyway. (Upstream has reorganized this somewhat in the mean
time, but for proper backtraces we would need llvm-symbolizer in base.)
MFC after: 3 days
