NFSv2,3 byte range locking is attempted. A fix that allows the
nlm_advlock() to work with both clients is in progress, but
may take a while. As such, I am doing this commit so that
the kernel doesn't panic in the meantime.
Submitted by: jh
MFC after: 2 weeks
in a range must be checked when calling pmap_remove(). Calling
pmap_remove() from vm_pageout_map_deactivate_pages() with the entire range
of the map could result in attempting to demap an extraordinary number
of pages (> 10^15), so iterate through each map entry and unmap each of
them individually.
MFC after: 6 weeks
K2 SATA controllers. The chip's status register must be read first, and
as a long, for other registers to be correctly updated after a command, and
this includes the command sequence in device detection as well as the
previously handled case after interrupts. While here, clean up some
previous hacks related to this controller.
Reported by: many
Reviewed by: mav
MFC after: 3 weeks
syscall and the same function, but are very different and share almost no code.
To make it easier to read and analyze, split vfs_domount() into
vfs_domount_first() and vfs_domount_update().
Reviewed by: kib
- Correct error paths. The system will be useless on devfs_fixup() failure, so
why bother? Maybe for the same reason why a dead body is washed and dressed
in a nice suit before it is put into a coffin? Maybe system's last will is to
panic without any locks held?
Reviewed by: kib
Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down
version of Marvell SheevaPlug. Device tree source file could use
more tweaking, but at least it wll network boot and run FreeBSD/arm.
PCI-express. I used PCIZ_* for ID constants (plain capability IDs use
PCIY_*).
- Add register definitions for the Advanced Error Reporting, Virtual
Channels, and Device Serial Number extended capabilities.
- Teach pciconf -c to list extended as well as plain capabilities. Adds
more detailed parsing for AER, VC, and device serial numbers.
MFC after: 2 weeks
- Updates for the message ring clean up in r212321.
- Instead of dropping Tx packet on credit fail, retry send until it
succeeds.
- Fix freeing mbufs in case of P2P descriptors:
We cannot free the mbuf when the P2P descriptor freeback is received. The
mbuf may be still in use by the GMAC, since the P2P freeback indicates that
it read the P2D descriptors in the P2P message.
Now we free just the P2P descriptor when the P2P freeback message is
received. Another freeback P2D message has been added to the end of
the packet descriptors, the mbuf will be freed only when we received
this.
The P2P descriptor issue was reported by srgorti at netlogicmicro dot com.
are still bound to BSP. It confuses timer management logic in per-CPU mode
and may cause timer not being reloaded. Check such cases on interrupt
arival and reload timer to give system some more time to manage proper
binding.
wrong element of the VSID bitmap array to be examined after a collision,
leading to reallocation of in-use VSIDs under some circumstances, with
attendant memory corruption. Also add an assert to check for this kind of
problem in the future.
MFC after: 4 days
Fix message ring send path:
- define msgrng_access_enable() which disables local interrupts
and enables message ring access. Also define msgrng_restore() which
restores interrupts
- remove all other msgrng enable/disable macros, no need of critical_enter
and other locking here.
- message_send() fixup: re-read status until pending bit clears
- message_send_retry() fixup: retry only few times with interrupts disabled
- Fix up message_send/message_send_retry callers - call
msgrng_access_enable() and msgrng_restore() correctly so that interrupts
are not disabled for long.
- removed unused and obsolete code from sys/mips/rmi/msgring.h
- some style fixes - more later
rge.c (XLR GMAC driver):
- updated for the message ring changes
- remove unused message_send_block()
- retry on credit failure, this is not a permanent failure when credits
are configured correctly. Add panic if credits are not available to
send for a long time.
PowerPC CPUs running a 32-bit kernel. This bug could cause in-use VSIDs
to be allocated again to another process, causing memory space overlaps
and corruption.
Reported by: linimon
discrepencies from the igb version which was the target.
Change the message when neither MSI or MSIX are enabled
and a fallback to Legacy interrupts happen, the existing
message was confusing.
directories for purposes of validating name cache entries. This
closes races where two updates to a file or directory within the same
second could result in stale entries in the name cache. While here,
remove the 'n_expiry' field as it is no longer used.
Reviewed by: rmacklem
MFC after: 1 week
"uncore" devices (such as the memory controller) in that socket. Stop
hardcoding support for two busses, but instead start probing buses at
domain 0, bus 255 and walk down until a bus probe fails. Also, do not probe
a bus if it has already been enumerated elsewhere (e.g. if ACPI ever
enumerates these buses in the future).
Fix interrupt routing so that the irq returned is correct for XLR and
XLS. This also updates the MSI hack we had earlier - we still don't
really support MSI, but we support some drivers that use MSI, by providing
support for allocating one MSI per pci link - this MSI is directly
mapped to the link IRQ.
lock on the pmc-sx lock. This prevents a deadlock with
pmc_log_process_mappings, which has an exclusive lock on pmc-sx and tries
to get a read lock on a vm_map. Downgrading the vm_map_lock in munmap
allows pmc_log_process_mappings to continue, preventing the deadlock.
Without this change I could cause a deadlock on a multicore 8.1-RELEASE
system by having one thread constantly mmap'ing and then munmap'ing a
PROT_EXEC mapping in a loop while I repeatedly invoked and stopped pmcstat
in system-wide sampling mode.
Reviewed by: fabient
Approved by: emaste (mentor)
MFC after: 2 weeks
using ipproto_{un,}register() and the newly created ip6proto_{un,}register()
so that it can again receive IPPROTO_CARP packets allowing its state machine
to work.
Reviewed by: bz
Approved by: ken (mentor)
- add identify method to create driver's own device_t
- successfully probe only driver's own device_t instead of any device_t
- (ab)use device order to hopefully be probed/attached after acpi_wmi
PR: kern/147858
Tested by: Maciej Suszko <maciej@suszko.eu>
MFC after: 1 week
- Add special check for case when time expires before being programmed.
This fixes interrupt loss and respectively timer death on attempt to
program very short interval. Increase minimal supported period to more
realistic value.
- Add support for hint.hpet.X.allowed_irqs tunable, allowing manually
specify which interrupts driver allowed to use. Unluckily, many BIOSes
program wrong allowed interrupts mask, so driver tries to stay on safe
side by not using unshareable ISA IRQs. This option gives control over
this limitation, allowing more per-CPU timers to be provided, when FSB
interrupts are not supported. Value of this tunable is bitmask.
- Do not use regular interrupts on virtual machines. QEMU and VirtualBox
do not support them properly, that may cause problems. Stay safe by default.
Same time both QEMU and VirtualBox work fine in legacy_route mode.
VirtualBox also works fine if manually specify allowed ISA IRQs with above.
upper layer. Until now, unionfs prevents to use that kind of
file system as upper layer. This time, I changed to allow
that kind of file system as upper layer. By this change, you
can use whiteout not supporting file system (e.g., especially
for tmpfs) as upper layer. It's very useful for combination of
tmpfs as upper layer and read only file system as lower layer.
By difinition, without whiteout support from the file system
backing the upper layer, there is no way that delete and rename
operations on lower layer objects can be done. EOPNOTSUPP is
returned for this kind of operations as generated by VOP_WHITEOUT()
along with any others which would make modifica tions to the
lower layer, such as chmod(1).
This change is suggested by ed.
Submitted by: ed
