adding appropriate #ifdefs. For module builds the framework needs
adjustments for at least carp.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
from the interface index, then decrease refcount, not vice versa.
Otherwise there is a race (reproducible) when if_free_internal()
contests on IFNET_WLOCK(), and we got a zero-refed ifnet in the
index for a long time. It may be picked by some other thread,
that runs ifnet_byindex_ref(), who takes the ifnet from index,
and bumps refcount. When reader drops the lock, if_free_internal()
proceeds with free. Then reader tries to free it a second time.
from processes inside jails if the addresses do not belong to the jail.
Originally reported by: Pieter de Boer via remko
PR: kern/151119
Tested by: Piotr KUCHARSKI (nospam 42.pl) [gif]
MFC after: 1 week
VNET socket push back:
try to minimize the number of places where we have to switch vnets
and narrow down the time we stay switched. Add assertions to the
socket code to catch possibly unset vnets as seen in r204147.
While this reduces the number of vnet recursion in some places like
NFS, POSIX local sockets and some netgraph, .. recursions are
impossible to fix.
The current expectations are documented at the beginning of
uipc_socket.c along with the other information there.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
Tested by: zec
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC after: 2 weeks
Resort the CURVNET_SET* macros in the non-VNET_DEBUG case to match
the call order of the VNET_DEBUG case.
Add the VNET_ASSERT() to the non-VNET_DEBUG case as well so that
INVARIANTS will still catch problems.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
MFC after: 2 weeks
Make VNET_ASSERT() available with either VNET_DEBUG or INVARIANTS.
Change the syntax to match KASSERT() to allow more flexible panic
messages rather than having a printf with hardcoded arguments
before panic.
Adjust the few assertions we have to the new format (and enhance
the output).
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
MFC after: 2 weeks
table in if_grow(). The order of the SYSINIT's for ifnet state were swapped
so that the various locks were initialized before being used.
Reviewed by: pluknet, bz
MFC after: 2 weeks
reading. (This was already done for writing to a sysctl). This
requires all SYSCTL setups to specify a type. Most of them are now
checked at compile-time.
Remove SYSCTL_*X* sysctl additions as the print being in hex should be
controlled by the -x flag to sysctl(8).
Succested by: bde
This was lost when it was converted to using a condition variable instead
of lbolt.
- Drop the priority of flowtable down to PPAUSE when it is idle as well
since it is a similar background task.
MFC after: 2 weeks
counterpart also takes, i.e. "fdx" for "full-duplex", "flow" for
"flowcontrol", "hdx" for "half-duplex" as well as "loop" and "loopback"
for "hw-loopback".
MFC after: 1 week
Rather than duplicating the LLE_FREE_LOCKED() macro code in LLE_FREE(),
call it directly (like we do for the RT_* macros).
Sponsored by: ISPsystem [1]
Reviewed by: julian [1]
MFC After: 1 week
[1] Early 2010.
variable into two so that we can see on which one we are waiting.
This might also more properly propagate the update of the
flowclean_cycles flag and avoid "hangs" people were seeing.
Suggested by: rwatson [1]
Sponsored by: ISPsystem [1]
Reviewed by: julian [1]
Updated by: Mikolaj Golub (to.my.trociny gmail.com)
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC After: 1 week
[1] Early 2010, initial version.
isn't configurable in a meaningful way. This is for ifconfig(8) or
other tools not to change code whenever IFT_USB-like interfaces are
registered at the interface list.
Reviewed by: brooks
No objections: gavin, jkim
created in separated vnets. As a side-effect of having a separated
if_cloner instance for each vnet, all vlan ifnets created in a vnet
will be automatically destroyed when vnet teardown is initiated.
Disallow SIOCSETVLAN and SIOCGETVLAN ioctls on vlan ifnets which are
associated with physical ifnets residing in parent vnets.
This is an interim vlan-specific solution which will be superseded by a
more generic if_cloner V_irtualization change from p4. For nooptions
VIMAGE builds, this should be a no-op change.
Discussed with: bz
MFC after: 3 days
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
support in mii(4):
- Merge generic flow control advertisement (which can be enabled by
passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from
NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD,
IFM_FLOW isn't implemented as a global option via the "don't care
mask" but instead as a media specific option this. This has the
following advantages:
o allows flow control advertisement with autonegotiation to be
turned on and off via ifconfig(8) with the default typically
being off (though MIIF_FORCEPAUSE has been added causing flow
control to be always advertised, allowing to easily MFC this
changes for drivers that previously used home-grown support for
flow control that behaved that way without breaking POLA)
o allows to deal with PHY drivers where flow control advertisement
with manual selection doesn't work or at least isn't implemented,
like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4),
by setting MIIF_NOMANPAUSE
o the available combinations of media options are readily available
from the `ifconfig -m` output
- Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE
and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so
these are understood by ifconfig(8).
o Make the master/slave support in mii(4) actually usable:
- Change IFM_ETH_MASTER from being implemented as a global option via
the "don't care mask" to a media specific one as it actually is only
applicable to IFM_1000_T to date.
- Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to
actually configure manually selected slave mode (like we also do in
the PHY specific implementations).
- Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it
is understood by ifconfig(8).
o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4),
e1000phy(4) and ip1000phy(4) to use the generic flow control support
instead of home-grown solutions via IFM_FLAGs. This includes changing
these PHY drivers and smcphy(4) to no longer unconditionally advertise
support for flow control but only if the selected media has IFM_FLOW
set (or MIIF_FORCEPAUSE is set) and implemented for these media variants,
i.e. typically only for copper.
o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and
set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0
and some IFM_FLAGn.
o Switch brgphy(4) to add at least the the supported copper media based on
the contents of the BMSR via mii_phy_add_media() instead of hardcoding
them. The latter approach seems to have developed historically, besides
causing unnecessary code duplication it was also undesirable because
brgphy_mii_phy_auto() already based the capability advertisement on the
contents of the BMSR though.
o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not
just BCM5701. Apparently this was a misinterpretation of a workaround
in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and
BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but
this doesn't mean we can't set these as well on other PHYs for manual
media selection.
o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so
IFM_1000_T master mode support now is generally available with all PHY
drivers.
o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's
not applicable there.
Reviewed by: yongari (plus additional testing)
Obtained from: NetBSD (partially), OpenBSD (partially)
MFC after: 2 weeks
bug (incorrect placement of __start_SECNAME in some cases) that was
fixed in r210245.
There is already an UPDATING entry about needing a recent ld.
MFC after: 1 month
When a fast machine first brings up some non TCP networking program
it is quite possible that we will drop packets due to the fact that
only one packet can be held per ARP entry. This leads to packets
being missed when a program starts or restarts if the ARP data is
not currently in the ARP cache.
This code adds a new sysctl, net.link.ether.inet.maxhold, which defines
a system wide maximum number of packets to be held in each ARP entry.
Up to maxhold packets are queued until an ARP reply is received or
the ARP times out. The default setting is the old value of 1
which has been part of the BSD networking code since time
immemorial.
Expose the time we hold an incomplete ARP entry by adding
the sysctl net.link.ether.inet.wait, which defaults to 20
seconds, the value used when the new ARP code was added..
Reviewed by: bz, rpaulo
MFC after: 3 weeks
symbols of the set_vnet and set_pcpu sections, so those symbols will
always be emitted in kernel modules, if they use vnet.h or pcpu.h.
Also, for pcpu.h, make the __(start|stop)_set_pcpu declarations, and
associated macros invisible to userland, to prevent it picking up these
symbols.
Reviewed by: kib
enhancements (1). Switch to a standard 2-clause BSD license for this (2).
Unfortunately we have to un-static the ifindex_table for this but do not
publicly export it.
Suggested by: rwatson (1) a while back.
Approved by: thompsa (2) for the change from r204279.
MFC after: 6 days
- move all the chunks into one file, which allows to hide SIOCGIFCONF32
global definition as well.
- replace __amd64__ with proper COMPAT_FREEBSD32 around.
- handle 32bit capacity before going into the handler itself instead of
doing internal 32bit specific changes within it (e.g. as it's done for
SIOCGDEFIFACE32_IN6).
- use explicitely sized types for ABI compat.
Approved by: kib (mentor)
MFC after: 2 weeks
over all interfaces to make sure the address will neither change nor be
freed while we are working on it.
PR: kern/146250
Submitted by: Mikolaj Golub (to.my.trociny gmail.com)
MFC after: 1 week
driver-maintained ifnet fields (such as if_drv_flags).
- Use soft locks as the mutex that protects each interface's knote list
rather than using the global knote list lock. Also, use the softc
for kn_hook instead of the cdev.
- Use mtx_sleep() instead of tsleep() when blocking in the read routines.
This fixes a lost wakeup race.
- Remove D_NEEDGIANT now that the cdevsw routines use the softc lock
where locking is needed.
- Lock IFQ when calculating the result for FIONREAD in tap(4). tun(4)
already did this.
- Remove remaining spl calls.
Submitted by: Marcin Cieslak saper of saper|info (3)
MFC after: 2 weeks
code associated with overflow or with the drain function. While this
function is not expected to be used often, it produces more information
in the form of an errno that sbuf_overflowed() did.
