Previously, if the threshold was changed, then MC_CTL2_CMCI_EN would get
cleared and the logic would switch to the polling only mode.
Discussed with: jhb
MFC after: 2 weeks
getdents64() with wrapper over kern_getdirentries().
The patch was originally written by emaste@ and then adapted by trasz@
and me.
Note:
1. I divided linux_getdents() and linux_readdir() as in case when the
getdents() called with count = 1 (readdir() case) it can overwrite
user stack (by writing to user buffer pointer more than 1 byte).
2. Linux returns EINVAL in case when user supplied buffer is not enough
to contain fetched dirent.
3. Linux returns ENOTDIR in case when fd points to not a directory.
Reviewed by: trasz@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D2210
All this code is based on assumption that data will be stored in one piece,
and since buffer size if known and fixed, it is easier to hardcode it.
MFC after: 2 weeks
This patch adds a new function to the server krpc called
svcpool_close(). It is similar to svcpool_destroy(), but does not free
the data structures, so that the pool can be used again.
This function is then used instead of svcpool_destroy(),
svcpool_create() when the nfsd threads are killed.
PR: 204340
Reported by: Panzura
Approved by: rmacklem
Obtained from: rmacklem
MFC after: 1 week
Define them as RLIM_INFINITY. This is allowed by POSIX in case all
resource limits are representable in an object of type rlim_t. Since
we do not allow negative rlim_t, with some strength this definition is
conforming.
We are not conforming fully still because POSIX requires rlim_t to be
unsigned type. Fixing this without breaking ABI to redefine
RLIM_INFINITY is impossible.
PR: 209729
Submitted by: bltsrc@mail.ru
Exp-run done by: antoine
MFC after: 2 weeks
Since locks are dropped when a thread suspends, it's possible for another
thread to deliver a signal to the suspended thread. If the thread awakens from
suspension without checking for signals, it may go to sleep despite having
a pending signal that should wake it up. Therefore the suspension check is
done first, so any signals sent while suspended will be caught in the
subsequent signal check.
Reviewed by: kib
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9530
In general case m_pullup() does not really guarantee any data alignment.
Instead of depenting on side effects caused by data being always copied
out of mbuf cluster (which is probably a bug by itself), always allocate
aligned BHS buffer and read data there directly from socket.
While there, reuse new icl_conn_receive_buf() function to read digests.
The code could probably be even more optimized to aggregate those reads,
but until that done, this is still easier then the way it was before.
MFC after: 2 weeks
There could be a race between the vm daemon setting RACCT_RSS based on
the vm space and vmspace_exit (called from exit1) resetting RACCT_RSS to
zero. In that case we can get a zombie process with non-zero RACCT_RSS.
If the process is jailed, that may break accounting for the jail.
There could be other consequences.
Fix this race in the vm daemon by updating RACCT_RSS only when a process
is in the normal state. Also, make accounting a little bit more
accurate by refreshing the page resident count after calling
vm_pageout_map_deactivate_pages().
Finally, add an assert that the RSS is zero when a process is reaped.
PR: 210315
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D9464
Add ACPI device 80860F14 with _UID 3 to the list of known devices. It
make SD card available on NUCs and Minnowboard. Previously added _UID 1
covered only eMMC devices.
Reported by: kib@
MFC after: 1 week
Cleaned up some spaces where tabs should be.
efipart_ioctl() DIOCGMEDIASIZE needs to use uint64_t, not off_t
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9562
ip_data_mbuf is always appended to ip_bhs_mbuf, so it does not need own
packet header. This change first avoids allocation/initialization of the
header, and then avoids dropping one when it later gets to socket buffer.
MFC after: 2 weeks
Right now this header file doesn't want to build when included on its
own, as it depends on some integer types that are only declared
internally. Switch it over to use <sys/_types.h> and the __*
counterparts.
meta-data, copy it into the softc structure.
When returning md(4) device details to the caller, include the file name in
any MD_PRELOAD type devices if it is set (first character is not NUL.)
In mdconfig, for "preload" type md(4) devices, if there is file config
available, print it in the file column of the output.
Reviewed by: brooks
Approved by: sjg (mentor)
MFC after: 1 month
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D9529
The inpcb structure has inp_sp pointer that is initialized by
ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec
security policies associated with a specific socket.
An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket
options to configure these security policies. Then ip[6]_output()
uses inpcb pointer to specify that an outgoing packet is associated
with some socket. And IPSEC_OUTPUT() method can use a security policy
stored in the inp_sp. For inbound packet the protocol-specific input
routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms
to inbound security policy configured in the inpcb.
SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends
packets. Thus IPSEC_OUTPUT() method does not consider such packets as
associated with some socket and can not apply security policies
from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY()
method is called from protocol-specific input routine, it can specify
inpcb pointer and associated with socket inbound policy will be
checked. But there are two problems:
1. Such check is asymmetric, becasue we can not apply security policy
from inpcb for outgoing packet.
2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and
access to inp_sp is protected. But for SCTP this is not correct,
becasue SCTP uses own locks to protect inpcb.
To fix these problems remove IPsec related PCB code from SCTP.
This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options
will be not applicable to SCTP sockets. To be able correctly check
inbound security policies for SCTP, mark its protocol header with
the PR_LASTHDR flag.
Reported by: tuexen
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D9538
Rename kern_vm_* functions to kern_*. Move the prototypes to
syscallsubr.h. Also change Mach VM types to uintptr_t/size_t as
needed, to avoid headers pollution.
Requested by: alc, jhb
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9535
Return full channel list via iwi_getradiocaps() method
(ieee80211_init_channels() was replaced with iwi_getradiocaps()
to be consistent with other drivers).
PR: 216923
Submitted and tested by: ds@ukrhub.net (original patch)
MFC after: 5 days
em_local_timer() executions during normal operation and was very likely
to cause a lock up on igb(4) devices.
Submitted by: Matt Macy (mmacy@nextbsd.org)
Reported by: jtl
Reviewed by: gallatin
Sponsored by: Limelight Networks & Netflix
For regular files and posix shared memory, POSIX requires that
[offset, offset + size) range is legitimate. At the maping time,
check that offset is not negative. Allowing negative offsets might
expose the data that filesystem put into vm_object for internal use,
esp. due to OFF_TO_IDX() signess treatment. Fault handler verifies
that the mapped range is valid, assuming that mmap(2) checked that
arithmetic gives no undefined results.
For device mappings, leave the semantic of negative offsets to the
driver. Correct object page index calculation to not erronously
propagate sign.
In either case, disallow overflow of offset + size.
Update mmap(2) man page to explain the requirement of the range
validity, and behaviour when the range becomes invalid after mapping.
Reported and tested by: royger (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is both a microoptimization and a move of the consumer to more
commonly used vm function.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Members of the syscall argument structures are padded to a word size. So,
for COMPAT_LINUX32 we should convert user supplied system call arguments
which is 32-bit in that case to the array of register_t.
Reported by: Oleg V. Nauman
MFC after: 1 week
The main lockmgr routine takes 8 arguments which makes it impossible to
tail-call it by the intermediate vop_stdlock/unlock routines.
The routine itself starts with an if-forest and reads from the lock itself
several times.
This slows things down both single- and multi-threaded. With the patch
single-threaded fstats go 4% up and multithreaded up to ~27%.
Note that there is still a lot of room for improvement.
Reviewed by: kib
Tested by: pho
This enables the PHY circuitry for UTMI+ level 2 and 3, and sets the
flag to tell the ehci code that the root hub has a transaction translator
in it. For imx6 we can use the standard ehci_get_port_speed_portsc()
function to find out what speed device is connected to the port.
This makes the code to pass whole word of the mmap(2) syscall argument
prot to the syscall helper kern_vm_mmap(), which can validate all
bits. The change provides temporal fix for sys/vm/mmap_test
mmap__bad_arguments, which was broken after r313352.
PR: 216976
Reported and tested by: ngie
Sponsored by: The FreeBSD Foundation
If the TCP stack has retransmitted more than 1/4 of the total
number of retransmits before a connection drop, it decides that
its current RTT estimate is hopelessly out of date and decides
to recalculate it from scratch starting with the next ACK.
Unfortunately, it implements this by zeroing out the current RTT
estimate. Drop this hack entirely, as it makes it significantly more
difficult to debug connection issues. Instead check for excessive
retransmits at the point where srtt is updated from an ACK being
received. If we've exceeded 1/4 of the maximum retransmits,
discard the previous srtt estimate and replace it with the latest
rtt measurement.
Differential Revision: https://reviews.freebsd.org/D9519
Reviewed by: gnn
Sponsored by: Dell EMC Isilon
The efipart rework did break the ARM systems as the new code is
using more exact filters to sort the devices and we need to
add support for MEDIA_FILEPATH_DP device paths.
PR: 216940
Reported by: karl@denninger.net
Reviewed by: allanjude, manu
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D9520
From NetBSD christos Sat Jan 26 00:19:39 2013 +0000
make the buffer functions look exactly like the kernel ones and add other
cruft to make the kernel files compile.
ffs.c 1.54
ffs/buf.c 1.13
ffs/buf.h 1.3
ffs/ffs_alloc.c 1.21
ffs/ffs_balloc.c 1.15
Reviewed by: marcel, ngie
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8404
The isp(4) driver was changing the tag type for REQUEST SENSE
commands to Head of Queue, when the CAM CCB flag
CAM_TAG_ACTION_VALID was NOT set. CAM_TAG_ACTION_VALID is set
when the tag action in the XPT_SCSI_IO is not CAM_TAG_ACTION_NONE
and when the target has tagged queueing turned on.
In most cases when CAM_TAG_ACTION_VALID is not set, it is because
the target is not doing tagged queueing. In those cases, trying to
send a Head of Queue tag may cause problems. Instead, default to
sending a simple tag.
IBM tape drives claim to support tagged queueing in their standard
Inquiry data, but have the DQue bit set in the control mode page
(mode page 10). CAM correctly detects that these drives do not
support tagged queueing, and clears the CAM_TAG_ACTION_VALID flag
on CCBs sent down to the drives.
This caused the isp(4) driver to go down the path of setting the
tag action to a default value, and for Request Sense commands only,
set the tag action to Head of Queue.
If an IBM tape drive does get a Head of Queue tag, it rejects it with
Invalid Message Error (0x49,0x00). (The Qlogic firmware translates that
to a Transport Error, which the driver translates to an Unrecoverable
HBA Error, or CAM_UNREC_HBA_ERROR.) So, by default, it wasn't possible
to get a good response from a REQUEST SENSE to an FC-attached IBM
tape drive with the isp(4) driver.
IBM tape drives (tested on an LTO-5 with G9N1 firmware and a TS1150
with 4470 firmware) also have a bug in that sending a command with a
non-simple tag attribute breaks the tape drive's Command Reference
Number (CRN) accounting and causes it to ignore all subsequent
commands because it and the initiator disagree about the next
expected CRN. The drives do reject the initial command with a head
of queue tag with an Invalid Message Error (0x49,0x00), but after that
they ignore any subsequent commands. IBM confirmed that it is a bug,
and sent me test firmware that fixes the bug. However tape drives in
the field will still exhibit the bug until they are upgraded.
Request Sense is not often sent to targets because most errors are
reported automatically through autosense in Fibre Channel and other
modern transports. ("Modern" meaning post SCSI-2.) So this is not
an error that would crop up frequently. But Request Sense is useful on
tape devices to report status information, aside from error reporting.
This problem is less serious without FC-Tape features turned on,
specifically precise delivery of commands (which enables Command
Reference Numbers), enabled on the target and initiator. Without
FC-Tape features turned on, the target would return an error and
things would continue on.
And it also does not cause problems for targets that do tagged
queueing, because in those cases the isp(4) driver just uses the
tag type that is specified in the CCB, assuming the
CAM_TAG_ACTION_VALID flag is set, and defaults to sending a Simple
tag action if it isn't an ordered or head of queue tag.
sys/dev/isp/isp.c:
In isp_start(), don't try to send Request Sense commands
with the Head of Queue tag attribute if the CCB doesn't
have a valid tag action. The tag action likely isn't valid
because the target doesn't support tagged queueing.
Sponsored by: Spectra Logic
MFC after: 3 days
This information is less useful when the generated files are included in
source control along with the source. If needed it can be reconstructed
from the $FreeBSD$ tag in the generated file. Removing this information
from the generated output permits committing the generated files along
with the change to the system call master list without having inconsistent
metadata in the generated files.
Reviewed by: emaste, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9497
