CLANG_NO_IAS34 was introduced in r276696 to allow then-HEAD kernels to
be built with clang 3.4 in FreeBSD 10. As FreeBSD 11 and later includes
a version of Clang with a sufficiently capable integrated assembler we
do not need the workaround any longer.
Sponsored by: The FreeBSD Foundation
This is more clear and produces better results when generating function
stubs from syscalls.master.
Reviewed by: kib, emaste
Obtained from: CheribSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17784
Previously, RISC-V was enabling execute permissions in PTEs for any
readable page. Now, execute permissions are only enabled if they were
explicitly specified (e.g. via PROT_EXEC to mmap). The one exception
is that the initial kernel mapping in locore still maps all of the
kernel RWX.
While here, change the fault type passed to vm_fault and
pmap_fault_fixup to only include a single VM_PROT_* value representing
the faulting access to match other architectures rather than passing a
bitmask.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17783
This assumes that an access according to the prot in 'flags' triggered
a fault and is going to be retried after the fault returns, so the two
flags are set preemptively to avoid refaulting on the retry.
While here, only bother setting PTE_D for kernel mappings in pmap_enter
for writable mappings.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17782
This is just cosmetic.
A weirder issue is that the SBI doc claims the hart mask pointer should
be a physical address, not a virtual address. However, the implementation
in bbl seems to just dereference the address directly.
Reviewed by: markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17781
Currently this is a no-op, but will matter in the future when
cannot_use_txpkts() starts checking other conditions than just
needs_tso().
Sponsored by: Chelsio Communications
- Add a bus_child_location_str method to the nexus drivers that prints
out 'port=N' as the location string exported via devinfo and the
'%location' sysctl node.
- We can't use a bus_hint_device_unit to wire the unit numbers of
devices with a fixed devclass as the device gets assigned a unit in
make_device() before the device creator can set softc, etc.
Instead, when adding a child device, use a helper function much like
a bus_hint_device_unit method to look for wiring hints or to return
-1 to let the system choose a unit number. This function requires
an "at" hint for the port pointing to the nexus device and a "port"
hint listing the port number. For example:
hint.cxl.4.at="t5nex0"
hint.cxl.4.port="0"
wires cxl4 to the first port on the t5nex0 adapter.
Requested by: gallatin
MFC after: 2 months
Add a new 'debugger_on_trap' knob separate from 'debugger_on_panic'
and make the calls to kdb_trap() in MD fatal trap handlers prior to
calling panic() conditional on this new knob instead of
'debugger_on_panic'. Disable the new knob by default. Developers who
wish to recover from a fatal fault by adjusting saved register state
and retrying the faulting instruction can still do so by enabling the
new knob. However, for the more common case this makes the user
experience for panics due to a fatal fault match the user experience
for other panics, e.g. 'c' in DDB will generate a crash dump and
reboot the system rather than being stuck in an infinite loop of fatal
fault messages and DDB prompts.
Reviewed by: kib, avg
MFC after: 2 months
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17768
While here tag which architecture release fields were added and remove a
field that only existed in very early releases of the ARMv8 spec.
Sponsored by: DARPA, AFRL
end of the vnet_set. The generated code uses an absolute relocation at
one byte beyond the end of the carpstats array. This means the relocation
for the vnet does not happen for carpstats initialisation and as a result
the kernel panics on module load.
This problem has only been observed with carp and only on i386.
We considered various possible solutions including using linker scripts
to add padding to all kernel modules for pcpu and vnet sections.
While the symbols (by chance) stay in the order of appearance in the file
adding an unused non-file-local variable at the end of the file will extend
the size of set_vnet and hence make the absolute relocation for carpstats
work (think of this as a single-module set_vnet padding).
This is a (tmporary) hack. It is the least intrusive one as we need a
timely solution for the upcoming release. We will revisit the problem in
HEAD. For a lot more information and the possible alternate solutions
please see the PR and the references therein.
PR: 230857
MFC after: 3 days
The description of CMSG_FIRSTHDR used two variables (mhdr and msg) to
reference the same thing. Use msghdr consistency across the manual page
instead.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17804
A crash was reported where the crash occurred in nfs_advlock() when the
NFS_ISV4(vp) macro was being executed. This was caused by the vnode
being VI_DOOMED due to a forced dismount in progress.
This patch fixes the problem by locking the vnode before executing the
NFS_ISV4() macro.
Tested by: rlibby
PR: 232673
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17757
Most easily reproducible by attempting to activate the currently activated
BE, one would get a "not a cloned filesystem" error instead of success or a
sane message.
PR: 232488
MFC after: 3 days
- Document that mount_smbfs(8) only supports SMB1 and that SMB2 and SMB3
are not supported at the moment. Suggest users to browse ports for
software compatible with newer versions of the protocol.
- Copy supported servers list from README.
- Add a SEE ALSO section and reference the chapter about Samba in the
FreeBSD Handbook.
- Add a HISTORY section.
- Style changes:
- Use Dq instead of Em in the EXAMPLES section.
- Mark command modifiers with Cm.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH
Differential Revision: https://reviews.freebsd.org/D17798
specification for the comparisons made.
Thanks to lstewart@ for the suggestion.
MFC after: 4 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D17595
program to use the libufs library interface. No functional change
(as for now the libufs library does not do inode check-hashes).
Reviewed by: kib
Sponsored by: Netflix
On some Intel devices BIOS does not properly reserve memory (called
"stolen memory") for the GPU. If the stolen memory is claimed by the
OS, functions that depend on stolen memory (like frame buffer
compression) can't be used.
A function called pci_early_quirks that is called before the virtual
memory system is started was added. In Linux, this PCI early quirks
function iterates through all PCI slots to check for any device that
require quirks. While this more generic solution is preferable I only
ported the Intel graphics specific parts because I think my
implementation would be too similar to Linux GPL'd solution after
looking at the Linux code too much.
The code regarding Intel graphics stolen memory was ported from
Linux. In the case of Intel graphics stolen memory this
pci_early_quirks will read the stolen memory base and size from north
bridge registers. The values are stored in global variables that is
later read by linuxkpi_gplv2. Linuxkpi stores these values in a
Linux-specific structure that is read by the drm driver.
Relevant linuxkpi code is here:
https://github.com/FreeBSDDesktop/kms-drm/blob/drm-v4.16/linuxkpi/gplv2/src/linux_compat.c#L37
For now, only amd64 arch is suppor ted since that is the only arch
supported by the new drm drivers. I was told that Intel GPUs are
always located on 0:2:0 so these values are hard coded for now.
Note that the structure and early execution of the detection code is
not required in its current form, but we expect that the code will be
added shortly which fixes the potential BIOS bugs by reserving the
stolen range in phys_avail[]. This must be done as early as possible
to avoid conflicts with the potential usage of the memory in kernel.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Reviewed by: bwidawsk, imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16719
Differential revision: https://reviews.freebsd.org/D17775
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.
When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".
Submitted by: lme (modified)
Reviewed by: 0mp (previous version), lme, bcr
Relnotes: yes
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17113
