- Talk about supported chips rather than supported cards as the majority
of the hardware supported by gem(4) is on-board.
- "the .Nm driver"
- Sort the list of supported chips alphabetically.
- Sun GEM aren't used on-board though, so don't claim they'd be.
- Add a CAVEATS section informing that Sun GEM cards aren't supported
so far.
MFC after: 1 day
in order to simplify matters for people who are looking for a video
card supported by FreeBSD/sparc64.
- Add Sun PGX to the list of known working cards.
MFC after: 1 day
audit record size at run-time, which can be used by the user
process to size the user space buffer it reads into from the audit
pipe.
Perforce change: 105098
Obtained from: TrustedBSD Project
that it is not possible to use Fast IPsec in conjuction with KAME IPsec
- add available kernel options to ipsec(4)
- add reference for fast_ipsec(4) to ipsec(4)
Reviewed by: trhodes (mentor), keramida (mentor)
Approved by: keramida (mentor)
certain conditions. I haven't been able to find a better solution yet:
- Set a two read-only variables (${prefix} and ${etcdir}). This is
especially useful when using /etc/rc.d scripts with third-party
software installed from ports.
- Fix rc.d/sshd to work with openssh from ports using ${etcdir}
instead of hardcoded /etc.
- Reflect prefix/etcdir changes in rc.subr.8.
src/etc/rc.d/sshd: rev 1.9 -> 1.10
src/etc/rc.subr: rev 1.51 -> 1.52
src/share/man/man8/rc.subr.8: rev 1.11 -> 1.12
Approved by: cperciva (mentor)
despite the interface link status.
Add dhclient_flags_iface and background_dhclient_iface rc.conf options.
(where iface is a specific interface). These can be used to give
interface specific flags to dhclient.
Reviewed by: brooks@
before tagging them. This can help to work around brain-damage in some
switches that fail to pad a frame after untagging it if its length drops
below the minimum. This option is blessed by IEEE Std 802.1Q (2003 Ed.),
paragraph C.4.4.3.b. It's controlled by sysctl net.link.vlan.soft_pad.
Idea by: az
MFC after: 1 week
- Store the Ethernet header in node softc.
- Initialize header with dst addr and ethertype in node
constructor method.
- In node connect method send NGM_ETHER_GET_ENADDR message
downwards.
- If received reply from ng_ether(4) store the src addr
in softc.
- Add NGM_PPPOE_SETENDADDR message that allows user to
override the address with whatever he/she wants.
- "Ns No" is redundant, so reduce it to just "Ns";
- use Li to mark up CPU and system power states because here they are
just strings to be typed literally (add more such mark-up as well);
- the best practice of typesetting tells us to use an en-dash to
indicate a closed range; fortunately, groff_char(7) provides such a symbol.
In addition, consistently use a comma between independent clauses
coordinated by a conjunction.
Pointed out by: ru (mark-up part)
MFC after: 3 days
PowerPC-based Apple's machines and small utility to do it from
userland modelled after the similar utility in Darwin/OSX.
Only tested on 1.25GHz G4 Mac Mini.
MFC after: 1 month
This confused the manual page -> hardware notes perl script somewhat and
resulted in part of the output for the stge(4) entry not to be present
in the hardware notes.
Noticed by: brueffer
Prevent casual modification by requiring hw.acpi.thermal.user_override to
be set first. Fix printing of negative temperatures in the K->C conversion.
Document the remaining thermal sysctls.
MFC after: 3 days
and replace it with a new ntpdate_config variable.
- Document it in defaults/rc.conf and rc.conf.5.
- Document ntpdate_hosts in defaults/rc.conf.
Requested by: Chris Timmons <cwt@networks.cwu.edu>
Approved by: cperciva (mentor, implicit)
MFC after: 1 week
This driver was ported from OpenBSD by Shigeaki Tagashira
<shigeaki@se.hiroshima-u.ac.jp> and posted at
http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html
It was additionally cleaned up by me.
It is still a work-in-progress and thus is purposefully not in GENERIC.
And it conflicts with nve(4), so only one should be loaded.
encryption. There are two functions, a bpf tap which has a basic header with
the SPI number which our current tcpdump knows how to display, and handoff to
pfil(9) for packet filtering.
Obtained from: OpenBSD
Based on: kern/94829
No objections: arch, net
MFC after: 1 month
latter is a PCIe 10/100 chip.
Finally fix the EEPROM reading code so that we can access the EEPROMs on all
devices. In order to access the EEPROM, we must select 'EEPROM programming'
mode, and then set the EEPROM chip select bit. Previously, we were setting
both bits simultaneously, which doesn't work: they must be set in the
right sequence.
Always obtain the station address from the EEPROM, now that EEPROM
reading works correctly.
Make the TX interrupt moderation code based on the internal timer
optional and turned off by default.
Make the re_diag() routine conditional and off by default. When it is
on, only use it for the original 8169, which was the only device that
that really needed it.
Modify interrupt handling to use a fast interrupt handler and fast
taskqeueue.
Correct the rgephy driver so that it only applies the DSP fixup for
PHY revs 0 and 1. Later chips are fixed and don't need the fixup.
Make the rgephy driver advertise both 1000_FD and 1000_HD bits in
autoneg mode. A couple of the devices don't autoneg correctly unless
configured this way.
of them do that conditionally depending on kldstat. The code is
duplicated all over, but bugs can be uniqie.
To make the things more consistent, introduce a new rc.subr function,
load_kld, which takes care of loading a kernel module conditionally.
(Found this lying for a while in my p4 branch for various hacks.)
- Curitel PC5740 Wireless Modem (Verizon's PCMCIA card)
- Sierra MC5720 Wireless Modem (Built in to Thinkpad X60s)
Bump the date in the uscanner man page for the update some minutes ago.
- Convert to our standard SYNOPSIS layout
- Remove the kld from FILES, it's now mentioned in the SYNOPSIS
- Remove useless .Pp call at eof
MFC after: 3 days
s/myri10ge/mxge/g replacement in the myri10ge files. A few contuation
lines were joined because of the regained columns.
- Hook the mxge driver back to the build.
1.198 of "sys/sys/vnode.h". Remove a cross-reference to a manual
page that never existed.
---------------------------------------------------------------------- CVS:
PR: Fill this in if a GNATS PR is affected by the
change. CVS: Submitted by: Fill this in if someone else sent
in the change. CVS: Reviewed by: Fill this in if someone else
reviewed your modification. CVS: Approved by: Fill this in if
you needed approval for this commit. CVS: Obtained from: Fill
this in if the change is from third party software. CVS: MFC after:
N [day[s]|week[s]|month[s]] CVS: Fill in to get MFC notification
later. (days assumed unless specified) CVS:
---------------------------------------------------------------------- CVS:
Enter Log. Lines beginning with `CVS:' are removed automatically
- K&R -> ANSI prototype [O]
- Do not bother to do free right before exit() or execve() [O]
- Remove some dead code in addarg()
- Make additional parameters specified in mailer.conf(5)
actually work and document the fact. [N]
- Avoid using __progname but instead use getprogname()
and setprogname() to provide more sensible messages. [O, N]
- Update $OpenBSD$ and $NetBSD$ to reflect the fact that we
have sync'ed with their code.
- WARNS=6
Obtained from/Inspired by: OpenBSD [O], NetBSD [N] (partially)
- Remove "device cryptodev" as it is not needed for compiling padlock(4)
into the kernel. Actually it is not advisable, because padlock
instructions can be used directly from userland, so passing the work
through the kernel is a bad idea.
automaticly add it to an Ethernet bridge. This is intended for applications
such as qemu, vmware, openvpn, ... which open tap interfaces and need them
bridged with the hosts network adapter, the user can set up a glob for
interfaces to be automatically added (eg tap*).
1,2 and so on.
It specifies the command to be run as Nth after jail startup.
sh(1)-fu by: Dario Freni
PR: conf/97697
MFC after: 2 weeks
Reviewed by: ru@ (man page)
scripts. These scripts handle vnode backed md(4) devices.
Old ramdisk{,-own} scripts will stay a bit in CVS to allow some time for
migration since variable names have changed (ramdisk_* -> mdconfig_*).
Two new variables have been introduced to be able to populate the md(4)
device once it has been mounted (mdconfig_*_files and mdconfig_*_cmd).
Use should be as easy as:
mdconfig_md0="-t malloc -s 10m"
mdconfig_md1="-t vnode -f /var/foo.img"
See rc.conf(5) for more information and description of the additional
variables.
Approved by: cperciva
text and, as a result, 'FreeBSD' is not visible in apropos output
when security(7) is displayed. Fix this buglet by using a
literal 'FreeBSD' string in .Nd
PR: docs/85986
Submitted by: Matthias Schmidt <schmidtm@mathematik.uni-marburg.de>
MFC after: 1 week
list of Atheros-based cards from ath(4). The online list is
always more up to date, anyway.
This invalidates:
PR: docs/95360
Submitted by: Erik Nordstr:om Andersen <erik@erik-n-andersen.dk>
to device hints was committed. The GENERIC kernel configuration lost
its 'device fd' line at revision 1.260, committed by peter@ on
2000/06/13 22:28:46 UTC.
Delete the reference to 'device fd', to avoid kernel build breakage like
the one described in the PR audit trail.
PR: docs/91448
Submitted by: Eugene Grosbein <eugen@grosbein.pp.ru>
MFC after: 1 week
issue where some global jail_* variables were overriden in the script. [1]
- Change "jid" to "jname" in rc.conf(5), since it's more a jail name than a
jail id. [1]
- Update examples and comments in defaults/rc.conf to advertise new
variables and the fact that some of the jail-specific variables may be made
jail-global. [2]
Reported by: pjd [1], clsung [2]
Approved by: cperciva
X-MFC after: i got sufficient testing from people using rc.d/jail
subdirectories that will be used for removable media mount points (i.e.
mount points for CDs, floppy disks, USB drives, etc.). While the primary
purpose of /media is to provide a location for HAL
(http://www.freedesktop.org/wiki/Software_2fhal) to mount volumes, it could
be used by any application that needs to manage removable media volumes.
Discussed on: arch@
Approved by: mux
MFC after: 1 week
