This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
When pmcstat exits after some samples were dropped, give the user an
idea of how many were lost. (Granted, these are global numbers, but
they may still help quantify the scope of the loss.)
Differential Revision: https://reviews.freebsd.org/D4123
Approved by: gnn (mentor)
MFC after: 1 month
Sponsored by: Juniper Networks
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
This removes one of the frequent causes of ABI breakage when new CPU
types are added to hwpmc(4).
Differential Revision: https://reviews.freebsd.org/D2586
Reviewed by: davide, emaste, gnn (earlier version)
MFC after: 2 weeks
This supports e500v1, e500v2, and e500mc. Tested only on e500v2, but the
performance counters are identical across all, with e500mc having some
additional events.
Relnotes: Yes
These are similar to the mips24k performance counters - some are
available on perfcnt0/3, some are available on perfcnt1/4.
However, the events aren't all the same.
* Add the events, named the same as from Linux oprofile.
* Verify they're the same as "MIPS32(R) 74KTM Processor Core Family
Software User's Manual"; Document Number: MD00519; Revision 01.05.
* Rename INSTRUCTIONS to something else, so it doesn't clash with
the alias INSTRUCTIONS. I'll try to tidy this up later; there
are a few other aliases to add and shuffle around.
Tested:
* QCA9558 SoC (AP135 board) - MIPS74Kc core (no FPU.)
* make universe; where it didn't fail for other reasons.
TODO:
* It'd be nice to support the four performance counters
in at least this hardware, rather than just two.
Reviewed by: bsdimp ("looks good; don't break world".)
The MEM_UOPS_RETIRED actually work the same way as the Sandy
Bridge counters, but the counters were documented in a different
way and that seemed to cause the Ivy Bridge counters to be
implemented incorrectly. Use the same counter definitions as
Sandy Bridge. While I'm here, rename the counters to match
what's documented in the datasheet.
Differential Revision: https://reviews.freebsd.org/D1590
MFC after: 1 month
Sponsored by: Sandvine Inc.
On Sandy Bridge and later, to count branch-related events you
have to or together a mask indicating the type of branch
instruction to count (e.g. direct jump, branch, etc) and a bits
indicating whether to count taken and not-taken branches. The
current counter definitions where defining this bits individually,
so the counters never worked and always just counted 0.
Fix the counter definitions to instead contain the proper
combination of masks. Also update the man pages to reflect the
new counters.
Differential Revision: https://reviews.freebsd.org/D1587
MFC after: 1 month
Sponsored by: Sandvine Inc.
go back through HASWELL, IVY_BRIDGE, IVY_BRIDGE_XEON and SANDY_BRIDGE
to straighten out all the missing PMCs. We also add a new pmc tool
pmcstudy, this allows one to run the various formulas from
the documents "Using Intel Vtune Amplifier XE on XXX Generation platforms" for
IB/SB and Haswell. The tool also allows one to postulate your own
formulas with any of the various PMC's. At some point I will enahance
this to work with Brendan Gregg's flame-graphs so we can flamegraph
various PMC interactions. Note the manual page also needs some
work (lots of work) but gnn has committed to help me with that ;-)
Reviewed by: gnn
MFC after:1 month
Sponsored by: Netflix Inc.
Core i7 and Westmere processors, the uncore PMC subsystem is
completely different from the uncore PMC on smaller versions of CPUs.
Disable existing uncore hwpmc code for EX, otherwise non-existing MSRs
are accessed.
The cores PMCs seems to be identical for non-EX and EX, according to
the SDM.
Reviewed by: davide, fabient
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This also fixes asserts on removal of the module for the mpc74xx.
The PowerPC 970 processors have two different types of events: direct events
and indirect events. Thus far only direct events are supported. I included
some documentation in the driver on how indirect events work, but support is
for the future.
MFC after: 1 month
There is no point in hiding, e.g. pmc.xscale(3) from a developer running
on amd64, when the target arch in question will probably never have
manual pages installed at all.
Reviewed by: sbruno, hiren
0x3C: /* Per Intel document 325462-045US 01/2013. */
Add manpage to document all the goodness that is available in this
processor model.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: jimharris, sbruno
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
case 0x3E: /* Per Intel document 325462-045US 01/2013. */
Add manpage to document all the goodness that is available in this
processor model.
No support for uncore events at this time.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: davide, jimharris, sbruno
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
(Model 0x2D /* Per Intel document 253669-044US 08/2012. */)
Add manpage to document all the goodness that is available in this
processor model.
No support for uncore events at this time.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: jimharris@ fabient@
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
New kernel events can be added at various location for sampling or counting.
This will for example allow easy system profiling whatever the processor is
with known tools like pmcstat(8).
Simultaneous usage of software PMC and hardware PMC is possible, for example
looking at the lock acquire failure, page fault while sampling on
instructions.
Sponsored by: NETASQ
MFC after: 1 month
- Rename pmc.mips to pmc.mips24k since it covers just one CPU,
no whole architecture
- Add documetnations for Octeon's PMC counters
- Remove CAVEATS section from pmc.mips24k page: PMC for MIPS supports
sampling now.
o Wrap sentences on to new lines
o Rewrap lines where possible while trying to keep the diff to a
minimum
Found with: textproc/igor
MFC after: 1 week
X-MFC-With: r232157
Advantages:
- Reduces the number of different license versions in the tree
- Eliminates a typo
- Removes some incorrect author attributions due to c/p
- Removes c/p error potential for future pmc manpages
Approved by: jkoshy, gnn, rpaulo, fabient (copyright holders)
MFC after: 1 week
As the underlying block is 4KB if the PMC throughput is low the measurement
will be reported on the next tick. pmcstat(8) use the modified flush API to
reclaim current buffer before displaying next top.
MFC after: 1 month
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.
Reviewed by: ru
Approved by: philip, ed (mentors)
domain clock, 8 programmable PMC.
- Westmere based CPU (Xeon 5600, Corei7 980X) support.
- New man pages with events list for core and uncore.
- Updated Corei7 events with Intel 253669-033US December 2009 doc.
There is some removed events in the documentation, they have been
kept in the code but documented in the man page as obsolete.
- Offcore response events can be setup with rsp token.
Sponsored by: NETASQ
Similar to libexec/, do the same with lib/. Make WARNS=6 the norm and
lower it when needed.
I'm setting WARNS?=0 for secure/. It seems secure/ includes the
Makefile.inc provided by lib/. I'm not going to touch that directory.
Most of the code there is contributed anyway.
This brings hwpmc(4) support for 2nd and 3rd generation XScale cores.
Right now it's enabled by default to make sure we test this a bit.
When the time comes it can be disabled by default.
Tested on Gateworks boards.
A man page is coming.
Obtained from: //depot/user/rpaulo/xscalepmc/...
counters. For such CPUs, use an alternate mapping of convenience
names to events supported by PMC_CLASS_IAP programmable counters.
Testing and review by: fabient
and Core Duo), models 0xF (Core2), model 0x17 (Core2Extreme) and
model 0x1C (Atom).
In these CPUs, the actual numbers, kinds and widths of PMCs present
need to queried at run time. Support for specific "architectural"
events also needs to be queried at run time.
Model 0xE CPUs support programmable PMCs, subsequent CPUs
additionally support "fixed-function" counters.
- Use event names that are close to vendor documentation, taking in
account that:
- events with identical semantics on two or more CPUs in this family
can have differing names in vendor documentation,
- identical vendor event names may map to differing events across
CPUs,
- each type of CPU supports a different subset of measurable
events.
Fixed-function and programmable counters both use the same vendor
names for events. The use of a class name prefix ("iaf-" or
"iap-" respectively) permits these to be distinguished.
- In libpmc, refactor pmc_name_of_event() into a public interface
and an internal helper function, for use by log handling code.
- Minor code tweaks: staticize a global, freshen a few comments.
Tested by: gnn
reduce ABI disruptions when new cpu types and new PMC events are added
in the future.
- Support alternate spellings for PMC events. Derive the canonical
spelling of an event name from its enumeration name in 'enum pmc_event'.
- Provide a way for users to disambiguate between identically named events
supported by multiple classes of PMCs in a CPU.
- Change libpmc's machine-dependent event specifier parsing code to
better support CPUs containing two or more classes of PMC resources.
