Commit Graph

52 Commits

Author SHA1 Message Date
obrien
c63dab466c Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
imp
b0e392e66c Add a comment saying it might be Paralon 2003-08-21 17:51:17 +00:00
phk
672138153b Remove unused variable(s).
Put XXX comment where intent is unclear.

Found by:       FlexeLint
2003-05-31 20:27:42 +00:00
imp
0b41fd998b Make sure that pp_name is non-null before setting the device
description.  This allows us to rely entirely on the CIS entries if
necessary...
2003-04-10 04:36:02 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
joerg
03d7b34fa4 The Xircom hardware always delivers received packets with the FCS appended.
Thus, mark the M_HASFCS flag so the generic ethernet layers will account
for this.
2003-01-29 15:19:20 +00:00
imp
c9c03276cc Add INTEL EEPRO100
Submitted by: joerg
2003-01-25 23:18:01 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
shiba
b589dfc015 Add Accton EN2216. 2003-01-18 01:14:48 +00:00
mbr
9f1243940b When reading PHY regs over the i2c bus, the turnaround ACK bit
is read one clock edge too late. This bit is driven low by
slave (as any other input data bits from slave) when the clock
is LOW. The current code did read the bit after the clock was
driven high again.

Reviewed by:	luoqi
MFC after:	2 weeks
2003-01-10 08:09:58 +00:00
sam
14c32b5f40 network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
brooks
b67e739398 Use if_printf(ifp, "foo") instead of printf("xe%d: foo", ifp->it_unit). 2002-10-01 01:03:02 +00:00
imp
f1d60c06e8 Three minor changes:
1) Add support for compaq cpq 10/100 card (a rebadged ce3)
2) Minor protection for failure on vendor lookup
3) Minor style(9) nits.
2002-07-22 21:24:12 +00:00
imp
e24a5b6fbd The CNW_801 and CNW_802 are wireless cards that the cnw driver supports. 2002-07-21 04:27:44 +00:00
takawata
94f9a3d5a8 Fix build breakage on my pccard related commit. 2002-05-31 01:08:49 +00:00
imp
492a827587 Remove an unused variable. 2002-02-26 03:37:35 +00:00
shiba
b7d0d162c2 Update xe driver to probe and attach in a NEWCARD kernel.
And separate probe and attach routine for PC Card from if_xe.c
to if_xe_pccard.c.

Reviewed by: imp
2002-02-20 14:23:58 +00:00
imp
e709622f3f Add some seat belts. If we set the error rc, then return it and don't
pretend things succeeded.  This can happen if the address returned
form bus_alloc_resource for the cis memory is occupied by some of
thing.
2001-08-29 05:11:44 +00:00
phk
d214ae2171 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
phk
e87f7a15ad Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
jhb
fe7d8cee8f Tag unused functions with __unused. 2001-01-23 22:24:26 +00:00
wollman
70c88bb8da select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
phk
beadbd4365 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
archie
7357df6b48 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
imp
3dbed00e16 Remove the XE_DEBUG define. It shouldn't be defined now that things
are working.  Add a small blurb about XE_DEBUG as it might be useful
to some people troubelshooting problems in the future.

Submitted by:	"Kevin Oberman" <oberman@es.net>
2000-07-10 16:46:21 +00:00
imp
d394ba6e95 Add support for the modem side of the 56k combo card.
Submitted by:	Duncan Barclay <dmlb@ragnet.demon.co.uk>
2000-05-30 05:42:57 +00:00
archie
fa21035b4e Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00
imp
845340c062 Now that I've got reports that this works, let's turn the debugging off.
MIHIRA-san pointed out that debugging is rather big for tcpdump...

Submitted by:	sanpei@sanpei.org (MIHIRA Yoshiro)
2000-05-01 04:41:04 +00:00
imp
3fe00b6baa Return 0 from attach.
Submitted by: mihira-san <sanpei@sanpei.org>
2000-04-29 17:43:12 +00:00
imp
349f5760a2 First cut at adding CIS reading to xe driver. I don't have a card
that seems to be working (I have a MF card that has a 336 modem and
ethernet that the probe routine finds, but the attach fails on because
pccardd doesn't do what you'd like with MF cards all the time).
2000-04-25 06:09:54 +00:00
imp
13a243d8b5 o Preliminary support for mapping the CIS by the driver.
o Modify xe driver to use this.

There's still some issues with this code, so xe can't map the cis just
yet.  I'm thinking about how to resolve the issue.  pccard_nbk's
pccard_alloc_resource is getting in the way.
2000-04-20 08:37:46 +00:00
phk
6be1308ad1 Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>
2000-04-19 14:58:28 +00:00
peter
8582d01fec Remove #if 0'ed reference to isa_device->id_alive 2000-01-23 18:21:20 +00:00
imp
d207327910 Move xe driver from dev/pccard to dev/xe. Convert driver to newbus.
Driver is not functional yet, but does compile.  Tests with xe cards
indicates that it doesn't panic the machine when they are present, but
fail to probe.  Interface help in the pcic/pccard layers are needed to
complete this driver.
2000-01-10 08:05:53 +00:00
imp
d9bac1e9be Disable old PCCARD_MODULE code.
This should fix LINT.

Prompted by: phk's explicit message about LINT breakage
1999-10-29 17:28:09 +00:00
phk
d612df1de6 Remove NBPF conditionality of bpf calls in most of our network drivers.
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.

This does not open any security hole, because the bpf core isn't loadable

The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.

Add a couple of missing FreeBSD tags.
1999-09-25 12:06:01 +00:00
peter
7955c51a1d Restore vendor $Id$ now that it won't be clobbered. 1999-09-23 05:26:10 +00:00
peter
3b842d34e8 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
phk
e938d317d5 Decommision miscfs/specfs/specdev.h. Most of it goes into <sys/conf.h>,
a few lines into <sys/vnode.h>.

Add a few fields to struct specinfo, paving the way for the fun part.
1999-08-08 18:43:05 +00:00
des
3c4a5a075d Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
obrien
e88a3e6903 Wrap the definition of "XE_DEBUG" so it is overridable from the ``cc''
commandline or kernel conf file.
1999-06-22 19:21:00 +00:00
obrien
28ec06e877 Fix conflicts. 1999-06-22 19:19:46 +00:00
obrien
b8a2078ebc Virgin import of Xircom PCCARD driver v1.20 (1999/06/13):
* Conformance with Dingo specification. This includes:
	Collision/error statistics gathering.
	Multicast address filtering, eg. the hash filter.
	Initialisation and interrupt handling sequences.
Note that I've started on some of this already in v1.20.

* The probe routine needs some more work, to identify oddities such as the
  REM10.

* There are still problems with the autonegotiation code; specifically, it
  won't autonegotiate with some 10/100 hubs.  This might simply be the hardware
  not getting along, in which case there's nothing we can do, but it's still
  worth investigating

* CEM28/CEM33 support.  Should be able to integrate this directly from the
  Linux code.

* Performance enhancements:
	Full-duplex on 10Mbit networks.
	Virtual shared-memory mode.
	Early send and receive modes.

Developed by:	Scott Mitchell <scott@uk.freebsd.org>
Obtained from:	http://www.freebsd-uk.eu.org/~scott/xe_drv/
1999-06-22 19:12:08 +00:00
phk
6a5dc97620 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
obrien
5b44c4694e if_xe* now lives in sys/dev/pccard/ 1999-05-14 04:18:24 +00:00
obrien
17b0480645 Virgin import of Xircom PCCARD driver v1.19.
v1.19 (1999/04/15) updates the CEM56/REM56 support.

Current bugs & misfeatures
--------------------------
* CE2 cards still not working reliably. Unclear if this is related to
  packet I/O code or interrupt handling.
* Autonegotiation support remains flaky. We're now OK with 10Mbit auto
  hubs, but certain combination of hardware will fail to connect.

Developed by:	Scott Mitchell <scott@uk.freebsd.org>
Obtained from:	http://www.freebsd-uk.eu.org/~scott/xe_drv/
1999-05-14 02:26:20 +00:00
obrien
4b1527e8d6 Virgin import of Xircom PCCARD driver v1.18
v1.18 (1999/04/08) adds support for CEM56 and REM56 multifunction cards.

Developed by:	Scott Mitchell <scott@uk.freebsd.org>
Obtained from:	http://www.freebsd-uk.eu.org/~scott/xe_drv/
1999-05-14 02:00:38 +00:00
obrien
e2d43e406c Virgin import of Xircom PCCARD driver v1.17
v1.17 (1999/03/28) has xperimental fixes to 10Mbit autonegotiation and
CE2 input lockup.

KNOWN BUGS
==========

* Media auto-negotiation is definitely not right.  It will work in most
  circumstances and seems to connect OK to most 100Mbit networks, however some
  pathological combinations of hubs/networks/peers seem to confuse it.

* CE2 support is somewhat flakey (ranging from 'works perfectly' to 'hangs the
  machine' so far).  I've fixed the probe routine and a potential lockup in
  the output routine, but a lot of people still report that they can't receive
  or transmit.

* You won't be able to use the modem and Ethenet parts of a multifunction card
  simultaneously.  This is limitation the current FreeBSD PCMCIA support.
  Likewise, there is no support for CardBus devices.

Developed by:	Scott Mitchell <scott@uk.freebsd.org>
Obtained from:	http://www.freebsd-uk.eu.org/~scott/xe_drv/
1999-05-14 01:58:59 +00:00
obrien
69dc47ea9c Virgin import of Xircom PCCARD driver v1.16.
v1.16 (1999/03/08) fixed BPF input hang and infinite loop on CE2
short-packet output.

Developed by:	Scott Mitchell <scott@uk.freebsd.org>
Obtained from:	http://www.freebsd-uk.eu.org/~scott/xe_drv/
1999-05-14 01:53:32 +00:00
obrien
f3c7bdef70 Virgin import of Xircom PCCARD driver v1.15
v1.15 fixed driver registration bug under 3.1-STABLE.

Developed by:	Scott Mitchell <scott@uk.freebsd.org>
Obtained from:	http://www.freebsd-uk.eu.org/~scott/xe_drv/
1999-05-14 01:52:10 +00:00