pkg info -g returns 1 if a file mismatch [2]
flush stdout in pkg info -g [3]
clean up quiet mode (-q | --quiet) output of pkg_version(1) [4]
fix missing error call in uname check added to pkg_version(1) [5]
fix pkg_add(1) fails to install with -C from bad path [6]
only resolve path from pkg_add(1) -p if the given prefix do not start with a '/' [7]
PR: bin/13128 [1]
bin/139015 [2]
bin/113702 [3]
bin/142570 [4]
bin/146857 [5]
bin/157543 [6]
Submitted by: cy [1]
Anton Yuzhaninov <citrin@citrin.ru> [2]
Ighighi <ighighi@gmail.com> [3]
"N.J. Mann" <njm@njm.me.uk> [4]
gcooper [5]
David Naylor <naylor.b.david@gmail.com> [6]
netchild [7]
MFC after: 2 weeks
#defines. This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.
This is a mostly mechanical rename:
s/PCIR_EXPRESS_/PCIER_/g
s/PCIM_EXP_/PCIEM_/g
s/PCIM_LINK_/PCIEM_LINK_/g
When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.
Discussed with: jhb
MFC after: 1 week
is done.
The aggregate path was definitely accessing 'ts' before it was actually
being assigned.
This had the side effect of over-filtering frames, since occasionally that
bit would be '1'.
Whilst here, do the same thing in the non-aggregate completion function -
as calling the filter function may also invalidate bf.
Pointy hat to: adrian, for not noticing this over many, many code reviews.
This fixes issue in nvmecontrol(8), where clang throws a cast-align
warning when casting a __packed structure pointer to a uint32_t
pointer as part of printing raw hex output.
Reported by: dhw
'path' argument of ofw_parsedev() if devspec refers raw device with no path.
For example, `ls /pci@1f,0/ide@d/disk@0,0:a/` works fine, while
`ls /pci@1f,0/ide@d/disk@0,0:a` panicked before this change.
altq_add() and its descendants. Currently altq(4) in FreeBSD is configured
via pf(4) ioctls, which can't configure altq(4) w/o holding locks.
Fortunately, altq(4) code in spife of using M_WAITOK is ready to receive
NULL from malloc(9), so change is mostly mechanical. While here, utilize
M_ZERO instead of bzero().
A large redesign needed to achieve M_WAITOK usage when configuring altq(4).
Or an alternative (not pf(4)) configuration interface should be implemented.
Reported by: pluknet
This is important to secure a small timeframe at boot time, when
network is already configured, but pf(4) is not yet.
PR: kern/171622
Submitted by: Olivier Cochard-LabbИ <olivier cochard.me>
1) Ruleset parser uses a global variable for anchor stack.
2) When processing a wildcard anchor, matching anchors are marked.
To fix the first one:
o Allocate anchor processing stack on stack. To make this allocation
as small as possible, following measures taken:
- Maximum stack size reduced from 64 to 32.
- The struct pf_anchor_stackframe trimmed by one pointer - parent.
We can always obtain the parent via the rule pointer.
- When pf_test_rule() calls pf_get_translation(), the former lends
its stack to the latter, to avoid recursive allocation 32 entries.
The second one appeared more tricky. The code, that marks anchors was
added in OpenBSD rev. 1.516 of pf.c. According to commit log, the idea
is to enable the "quick" keyword on an anchor rule. The feature isn't
documented anywhere. The most obscure part of the 1.516 was that code
examines the "match" mark on a just processed child, which couldn't be
put here by current frame. Since this wasn't documented even in the
commit message and functionality of this is not clear to me, I decided
to drop this examination for now. The rest of 1.516 is redone in a
thread safe manner - the mark isn't put on the anchor itself, but on
current stack frame. To avoid growing stack frame, we utilize LSB
from the rule pointer, relying on kernel malloc(9) returning pointer
aligned addresses.
Discussed with: dhartmei
The hardware can optionally "filter" frames if successive transmissions
to a given node (ie, "entry in the keycache") fail. That way the hardware
can implement a kind of early abort of all the other frames queued to
that destination, rather than simply trying to TX each frame to that
destination (and failing.)
The background:
* If a frame comes back as being filtered, the hardware didn't try to
TX it (or it was outside the TX burst opportunity.) So, take it as a hint
that some (but not all, see below) frames to the destination may be
filtered.
* If the CLRDMASK bit is set in a TX descriptor, the "filter to this
destination" bit in the keycache entry is cleared and TX to that host
will be unconditionally retried.
* Right now everything has the CLRDMASK bit set, so filtered frames
tend to be aggregates and frames that fall outside of the WME burst
window. It was a bit worse in the past as I had messed up the TX
flags and CLRDMASK wasn't being set on aggregate frames.
The annoying bits:
* It's easy (ish) to do for aggregate session frames - firstly, they
can be retried in any order as long as they're within the BAW, and
there's already a bunch of infrastructure tracking how many frames
the TID has queued to the hardware (tid->hwq_depth.) However, for
frames that bypassed the software queue, hwq_depth doesn't get
incremented. I'll fix that in a subsequent commit.
* For non-aggregate session frames, the only retries that can occur
are ones for sequence numbers that hvaen't successfully been TXed yet.
Since there's no re-ordering going on in non-aggregate sessions, if any
subsequent seqno frames make it out, any filtered frames before that
seqno need to be dropped.
Hence why this initially is just for aggregate session frames.
* Since there may be intermediary frames to the destination that
have CLRDMASK set - for example, any directly dispatched management
frames to that destination - it's possible that there will be some
filtered frames followed up by some non filtered frames. Thus,
it can't be assumed that once you see a filtered frame for the given
destination node, all subsequent frames for all TIDs will be filtered.
Ok, with that in mind:
* Create a per-TID filtered frame queue for frames that the hardware
returns as filtered.
* Track filtered frames per-tid, rather than per-node. It just makes
the locking much easier.
* When a filtered frame appears in the completion function, the node
transitions to "filtered", and all subsequent completed error frames
(filtered or otherwise) are put on the filtered frame queue. The TID
is paused once (during the transition from non-filtered to filtered).
* If a filtered frame retry count exceeds SWMAX_RETRIES, a BAR should be
sent.
* Once all the frames queued to the hardware for the given filtered frame
TID, transition back from filtered frame to non-filtered frame, which
means pre-pending all the filtered frames onto the head of the software
queue, clearing the filtered frame state and unpausing the TID.
Things get quite hairy around handling completion (aggr, non-aggr, norm,
direct-dispatched frames to a hardware queue); whether it's an "error",
"cleanup" or "BAR" state as well as filtered, which order to do things
in (eg do filtered BEFORE checking for BAR, as the filter completion
may be needed to actually transmit a BAR frame.)
This work has definitely reminded me that I have to tidy up all the locking
and remove some of the ridiculous lock/unlock/lock/unlock going on in the
completion functions.
It's also reminded me that I should really split out TID versus hardware TXQ
locking, even if the underlying locking is still the destination hardware TXQ.
Finally, this is all pre-requisite for working on AP mode power save support
(PS-POLL, uAPSD) as well as improving performance to misbehaving nodes (as
they can transition into filter mode, stopping any TX until everything has
caught up.)
Finally (ish) - this should also be done for non-aggregate sessions as
there are still plenty of laptops and mobile devices that don't speak
802.11n but do wish for stable, useful power save AP support where packets
aren't simply dropped. This requires software retransmission for
non-aggregate sessions to be implemented, which includes the caveats I've
mentioned above.
Finally finally - this doesn't yet do anything about the CLRDMASK bit in the
TX descriptor. That's still unconditionally set to 1. I'll debug the
current work (mostly ensuring I haven't busted up the hairy transitions
between BAR, filtered, error (all frames in an aggregate failing) and
cleanup (when transitioning from aggregation -> non-aggregation.))
Finally finally finally - this is all original work by yours truely, rather
than ported from the Atheros internal driver codebase or Linux ath9k.
Tested:
* AR9280, AR5416 in STA mode
* AR9280, AR9130 in hostap mode
* Lots and lots of iperf testing in very marginal and non-marginal conditions,
complete with inducing filtered frames + BAR TX conditions.
Use of __builtin_constant_p in a function that is only called via
a pointer is a good example of how out-of-date it was.
Suggested by: bde
MFC after: 1 week
Since all attribute values start at 8-byte aligned boundary, we would
previously incorrectly calculate dn_bonuslen if any attribute but the
last had a variable-length value with length not multiple of 8.
Reported by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Tested by: Nicolas Rachinsky <fbsd-mas-0@ml.turing-complete.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> (for upstream)
MFC after: 2 weeks
directly in _rmlock.h and then including it (and its dependencies)
in pcpu.h. This leads to few _*.h headers to be included in pcpu.h
but this is not considered a big deal.
Really pc_rm_queue should be implemented as a dynamic member with
DPCPU interface, but we really want to keep the read acquisition as
fast as possible, so even the further pc_dynamic indirection should be
avoided, and the pollution is dealt like this.
Discussed with: jhb
MFC after: 1 week
support to FreeBSD. A full description of the overall functionality
being added is below. nvmexpress.org defines NVM Express as "an optimized
register interface, command set and feature set fo PCI Express (PCIe)-based
Solid-State Drives (SSDs)."
This commit adds nvme(4) and nvd(4) driver source code and Makefiles
to the tree.
Full NVMe functionality description:
Add nvme(4) and nvd(4) drivers and nvmecontrol(8) for NVM Express (NVMe)
device support.
There will continue to be ongoing work on NVM Express support, but there
is more than enough to allow for evaluation of pre-production NVM Express
devices as well as soliciting feedback. Questions and feedback are welcome.
nvme(4) implements NVMe hardware abstraction and is a provider of NVMe
namespaces. The closest equivalent of an NVMe namespace is a SCSI LUN.
nvd(4) is an NVMe consumer, surfacing NVMe namespaces as GEOM disks.
nvmecontrol(8) is used for NVMe configuration and management.
The following are currently supported:
nvme(4)
- full mandatory NVM command set support
- per-CPU IO queues (enabled by default but configurable)
- per-queue sysctls for statistics and full command/completion queue
dumps for debugging
- registration API for NVMe namespace consumers
- I/O error handling (except for timeoutsee below)
- compilation switches for support back to stable-7
nvd(4)
- BIO_DELETE and BIO_FLUSH (if supported by controller)
- proper BIO_ORDERED handling
nvmecontrol(8)
- devlist: list NVMe controllers and their namespaces
- identify: display controller or namespace identify data in
human-readable or hex format
- perftest: quick and dirty performance test to measure raw
performance of NVMe device without userspace/physio/GEOM
overhead
The following are still work in progress and will be completed over the
next 3-6 months in rough priority order:
- complete man pages
- firmware download and activation
- asynchronous error requests
- command timeout error handling
- controller resets
- nvmecontrol(8) log page retrieval
This has been primarily tested on amd64, with light testing on i386. I
would be happy to provide assistance to anyone interested in porting
this to other architectures, but am not currently planning to do this
work myself. Big-endian and dmamap sync for command/completion queues
are the main areas that would need to be addressed.
The nvme(4) driver currently has references to Chatham, which is an
Intel-developed prototype board which is not fully spec compliant.
These references will all be removed over time.
Sponsored by: Intel
Contributions from: Joe Golio/EMC <joseph dot golio at emc dot com>
- Use callout(9) rather than timeout(9).
- Add a mutex as an I/O lock that protects the adapter and is used
for the I/O path.
- Add an sx lock as a configuration lock that protects the relationship
of configured volumes.
- Freeze the request queue when a DMA load is deferred with EINPROGRESS
and unfreeze the queue when the DMA callback is invoked.
- Explicitly poll the hardware while waiting to submit a command to
allow completed commands to free up slots in the command ring.
- Remove driver-wide 'initted' variable from mlx_*_fw_handshake() routines.
That state should be per-controller instead. Add it as an argument
since the first caller knows when it is the first caller.
- Remove explicit bus_space tag/handle and use bus_*() rather than
bus_space_*().
- Move duplicated PCI device ID probing into a mlx_pci_match() routine.
- Don't check for PCIM_CMD_MEMEN (the PCI bus will enable that when
allocating the resource) and use pci_enable_busmaster() rather than
manipulating the register directly.
Tested by: no one despite multiple requests (hope it works)
an NVidia Tegra 2 CPU.
Tegra 2 needs an external patch to pmap for atomic operations to work. Even
with this the Kernel only gets to the mount root prompt. As such Tegra
support is considered experimental, however adding the kernel config will
help ensure the Tegra code builds.
indexing. When a device has gone it is not removed from device_map
table but just its entry_p field is set to NULL.
So when traversing device_map in disk_OS_get_ATA_disks() and
disk_OS_get_MD_disks() check for entry_p being NULL, otherwise the
bsnmpd crash is possible when a removed map entry is dereferenced.
Before the fix, for disk_OS_get_ATA_disks() the crash could be easily
reproduced running:
atacontrol detach ata1
The crash was not observed in disk_OS_get_MD_disks() because currently
snmp_hostres does no see md(4) disks: to get the device list it uses
devinfo(3), which does not return md devices.
Reported by: Miroslav Lachman 000.fbsd quip.cz
MFC after: 1 week
- Remove cvs(1) references.
- Remove CVS* environment references.
- Add default entries for the default SVNROOT for the Ports
Collection, and Documentation Project.
- While here, update 'SGML-based documentation' to 'XML-based',
since the recent SGML->XML conversion.
- Update an example providing SVNROOT environment usage.
Reminded by: nwhitehorn
MFC After: 1 week
X-MFC-With: r240586, r240587
