the connection after an unexpected loss of carrier:
set reconnect timer ntries
The man page warns against using this command when your
timeout value is slightly more than the other sides :{}
Suggested by: burton@bsampley.vip.best.com (Burton Sampley)
Delete bogus local versions of mount*.[ch] and nfs_prot*.[ch].
Use v3 protocol by default for NFS mounts. If v3 is not supported, v2 is
used automatically. Add a new mount options for NFS, 'nfsv2' to allow the
administrator to force the use of the older protocol.
Document the new mount options and fix a couple of markup problems.
pppd now creates /var/run/ttyXn.if file containing the interface name;
check that a 'login' user is not listed in /etc/ppp/ppp.disabled;
check that a 'login' user's shell is listed in /etc/ppp/ppp.shells;
make sure that passwordless 'login' logins are recorded in wtmp and
utmp.
and chap-secrets files. This allows specific users
to have pre-allocated IP numbers while others get
assigned dynamically.
Submitted by: David Nugent <davidn@unique.usn.blaze.net.au>
list has been dialed. Alternate number dialing has no "pause".
Suggested by: joerg
Document this behaviour. Document that the number of dial attempts
applies to the number of phone calls rather than the number of times
each number is dialed. Add a missing .El. Give a decent description
of how to connect to an ISP.
in the transfer request actually exist. Technically ypxfr can do this too,
but why waste the cycles getting ypxfr off the ground for a transfer we
already know is going to fail.
Also apply stricter access control rules; ypproc_xfr_2_svc() is in a
different class than the normal map access procedures procedures.
nfs requests from non-privileged ports.
Change mountd such that it does never set this variable, but only clears
it when run with -n. Also document this in the man page.
and quitting telnet immediately (while phone number dialed)
Log client connection/disconnection with PHASE_BIT now.
Add more error recovery on client disconnection
(presumably because the kernel is old). Moved the declaration of a
variable realated to this sysctl outside of an unrelated ifdef.
Not fixed:
- this sysctl is badly named (nfs occurs twice).
- it's silly to have for FreeBSD in FreeBSD code, especially when
only half of the FreeBSD-dependent code is ifdefed.
in uu_lock(). Add uu_lockerr() for turning the results of
uu_lock into something printable. Remove bogus section in man page
about race conditions allowing both processes to get the lock.
Include libutil.h and use uu_lock() correctly where it should.
Suggested by: ache@freebsd.org
in the Lite2 merge to not export some nfs constants. It started causing
warnings when I added a kernel-only #define for DIRBLKSIZ.
Removed `#define NFS'. This was an old, bad interface for telling
<sys/mount.h> to export nfs stuff.
it's done for pci. This is so that systat and vmstat can get at the
interrupt counts for the Inter-Processor Interrupts when running a smp
kernel. This doesn't affect the normal kernel, but makes life easier for
the smp people who don't have to track two versions of config.
vnconfig doesn't seem to be in Lite2, although dev/vn is. The Lite2
merge in userland has converted all mount calls except this one and
one for devfs in init, so we can drop support for old mount args soon.
Vnconfig probably shouldn't support mounting - it only supports ufs.
non-standard and not used. "port auto" is equal to "port?" or missing "port"
keyword now. "port none" is really probe routine task (return -1 for
no ports).
I suspect it was because the child exec code's parent was doing the
initial lookups, then forking, then doing other things (possibly trashing
the static data in the getpw*() buffer), then attempting to dereference
*pwd and *lc. Also, no error checking appeared to be done - I've allowed
it to fall back to the old "become user" code on critical failure rather than
risk running a user's cron jobs as root.
Accept SIGHUP as a "re-open logfile" signal. As ppp
doesn't set it's serial line to it's controlling terminal,
we can use HUP :)
This is a candidate for 2.2. The log.[ch] changes won't
conflict, but the main.c changes will. We just want to change the
kill(...,SIGHUP) to a SIGTERM and change the signal(SIGHUP,Hangup)
to a pending_signal(SIGHUP,LogReOpen).
These changes should fix the signal "problems" in ppp.
The signal changes should really be put into 2.2 too !
The following patches should do it. There were some other
changes made by Andrey recently that havn't been brought
into 2.2, it may be worth doing them now.
2. fix a potential buffer oflow,
3. makes watch(8) conform to sysexits(3).
Not a strong 2.2 candidate even if it would be nice.
Reviewed by: joerg, imp
was not setting the version number in the nfs_args data to mount(2), so it
was returning EFAULT. Perhaps the nfs_args version number was something
we added at some point?
to try and work around the nfsv3 headers in the post-lite2-kernel era.
This program somehow manages to make just about every #include conflict
with everything else. :-(
This puts it on the same footing as cvsup. It's been suggested on
numerous occasions that I shouldn't have imported it in the first place,
and now that sup has outlived it's usefulness..... Boom!
we need now.
Don't assume that file descriptor can't be 0 (many places)
Protect FD_* macros from being used with negative descriptors
Shorten MS EXT show help to fit 80 cols
dangerous! Signal handlers themself must be fixed to not call malloc,
but no pended handlers, it will be correct fix. In finite case each signal
handler can set some variable which will be analized later, but calling
handler functions manually is too dangerous (f.e. signals not blocked while
the handler or handlers switch executed in this case). Of course this
code can be fixed instead of removing, but it not worth fixing in any case.
Should go into 2.2
In addition sig.c code shows following dangerous fragments (there can be more,
but I stop after two):
This fragment
if (fn == SIG_DFL || fn == SIG_IGN) {
handler[sig-1] = (sig_type)0;
<------------- here
signal(sig,fn);
} else {
cause NULL pointer reference when signal comes
"here", but more worse fragment is below:
void handle_signals() {
int sig;
if (caused)
for (sig=0; sig<__MAXSIG; sig++, caused>>=1)
if (caused&1)
(*handler[sig])(sig+1);
}
caused is bitmask which set corresponding bit on each signal coming.
And now imagine, what happens when some signal comes (bit sets) while loop
is executed (see caused>>=1 !!!)
In this light carrier drop situation was (as gdb shows)
1. SIGSEGV in handle_signals because some junk called as *handler reference.
2. Since SIGSEGV was pended too (== never happens),
it can cause various range of disasters.
from /var/mail, added a routine to delete the removed user's files
from /tmp, /var/tmp, & /var/tmp/vi.recover, and added code to kill any
running processes owned by the removed user). I've also added a flag
for non-interactive execution, cleaned up the man page, and adjusted
my address.
Submitted by: ghelmer@cs.iastate.edu (Guy Helmer)
the password file into /etc/master.passwd and optional (-p) into
/etc/passwd. Enable this feature with the compile
option -DPASSWD_IGNORE_COMMENTS.
The character `#' introduces a comment. Leading spaces and tabs are
ignored: '^[ \t]*#.*\n$'
Count an empty line - only spaces, tabs or newline - also as a comment.
An empty line at the bottom of /etc/master.passwd is a common
novice error and increased my mail load: '^[ \t]*\n$'
1) When carrier dropped, old variant often forget to detect it cause
unkillable loop forever (because SIGTERM pended too, but it will be
separate commit)
2) Time intervals accuracy reasons
Should go into 2.2
life easier if a PS/2 mouse locks up the keyboard (frequent-ish,
but not repeatable).
Tidy up code (a bit) and make it -Wall
Is this a 2.2 candidate ? (although it doesn't -Wall in 2.2 because
of the lack of sys/sysproto.h
Remove #include's from sig.h and get dependant modules to include them
themselves. Make inclusion of if_var.h depend on __FreeBSD_version so
that the -current version of ppp can be used with 2.1.*
2.2 Candidate ?
