Commit Graph

45273 Commits

Author SHA1 Message Date
jasone
3daa9aa719 Add sem_*() functions. Named semaphores and process-shared semaphores
are not supported by this implementation, and the error return values
from sem_init(), sem_open(), sem_close(), and sem_unlink() reflect this.

Approved by:	jkh
2000-01-20 07:54:49 +00:00
wpaul
9408134d9b Regen. 2000-01-20 07:39:19 +00:00
wpaul
d5c9bbfbf2 More USB ethernet tweaks:
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the
  following improvements:
        o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP
          quirk. This allows drivers to specify busy waiting only for
          certain transfers (namely control transfers for reading/writing
          registers and stuff).
        o New USBD_FORCE_SHORT_XFER flag can be used to deal with
          devices like the ADMtek Pegasus that sense the end of bulk OUT
          transfers in a special way (if a transfer is exactly a multiple
          of 64 bytes in size, you need to send an extra empty packet
          to terminate the transfer).
        o usbd_open_pipe_intr() now accepts an interval argument which
          can be used to change the rate at which the interrupt callback
          routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the
          value specified in the device's config data, but drivers can
          override it if needed.
- Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions.
- Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all
  control transfers. We no longer force the non-tsleep hack for
  bulk transfers since these are done asynchronously anyway.
- Removed quirk entry fiddling from if_aue and if_kue since we don't
  need it anymore now that we have the USBD_NO_TSLEEP flag.
- Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to
  usbd_open_pipe_intr().
- Add a flag to the softc struct in the ethernet drivers to indicate
  when a device has been detached, and use this flag to perform
  tests to prevent the drivers from trying to do control transfers
  if this is the case. This is necessary because calling if_detach()
  with INET6 enabled will eventually result in a call to the driver's
  ioctl() routine to delete the multicast groups on the interface,
  which will result in attempts to perform control transfers. (It's
  possible this also happens even without INET6 support enabled.) This
  is pointless since we know that if the detach method has been called,
  the hardware has been unplugged.
- Changed watchdog timeout routines to just call the driver init routines
  to initialize the device states without trying to close and re-open the
  pipes. This is partly because we don't want to frob things at interrupt
  context, but also because this doesn't seem to work right and I don't
  want to panic the system just because a USB device may have stopped
  responding.
- Fix aue_rxeof() to be a little smarter about detecting when a double
  transfer is needed. Unfortunately, the design of the chip makes it hard
  to get this exactly right. Hopefully, this will go away once either
  Nick or Lennart finds the bug in the uhci driver that makes this ugly
  hack necessary.
- Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
kris
6dea110be6 Don't search for libraries in ${LOCALBASE}. This should fix the problems
people were seeing with conflicts with the openssl port.
2000-01-20 07:29:01 +00:00
kris
720968f83d Activate librsaglue 2000-01-20 07:27:49 +00:00
kris
c14f52207d Move the rsaref gunk to libRSAglue where ports expect it. 2000-01-20 07:27:38 +00:00
kris
3698c50454 Build infrastructure for libRSAglue, required for compatability with
ports even though it doesn't seem to do anything which requires it
to be separate from libcrypto.
2000-01-20 07:24:40 +00:00
imp
4e884c480a When we are execing a setugid program, and we have a procfs filesystem
file open in one of the special file descriptors (0, 1, or 2), close
it before completing the exec.

Submitted by: nergal@idea.avet.com.pl
Constructive comments: deraadt@openbsd.org, sef, peter, jkh
2000-01-20 07:12:52 +00:00
rwatson
9f8d2f98a9 A few more style cleanups
Submitted by:	bde
2000-01-20 06:39:07 +00:00
jasone
3d70640506 Do signal deferral for pthread_kill() as it was done in the old days.
Submitted by:	deischen
2000-01-20 04:46:52 +00:00
jasone
271b33587d Move ENTRY and ALTENTRY definitions to asm.h where they belong.
Unbreak profiling.  Again.

Submitted by:	bde
2000-01-20 03:15:01 +00:00
obrien
fb20480840 Update the sed action to match the change to "diff -u".
Otherwise the encrypted password of any account who's information changed
was shown in the daily email to root.

Submitted by:	jhb
2000-01-20 03:12:57 +00:00
msmith
469db80834 Add the pcdmx theatre lighting controller major number 2000-01-20 02:54:03 +00:00
jasone
ff778f6b27 Don't tsleep() while at splbio().
Correctly return EINPROGRESS from aio_error() even when an aio request
is still in the socket queue.

Submitted by:	Adrian Chadd <adrian@bofh.co.uk>
2000-01-20 01:59:58 +00:00
archie
ba86f900bf Fix an #ifdef that should have been and #ifndef.
Noticed by:	Hellmuth Michaelis <hm@hcs.de>
2000-01-20 01:49:45 +00:00
green
10377a13d6 I like base-36 better. 2000-01-20 01:49:41 +00:00
kato
f9060bc85d Port of the PC-98 ppc to the newbus system. 2000-01-20 00:58:49 +00:00
wilko
3cca0c2271 Here is the new Alpha-specific HARDWARE.TXT Again, generic HARDWARE.TXT
info should go into release/texts/HARDWARE.TXT That file will  arrive there
shortly courtesy of the repo meisters ;-)
2000-01-19 23:04:21 +00:00
wilko
ba6a30dd58 Only briefly going away, will re-incarnate as HARDWARE.TXT 2000-01-19 23:00:37 +00:00
wilko
9f03ccf8af Allow automatic 'pulling in' of machdep *.TXT files from ./texts/[alpha,i386]
and concat these  to the corresponding generic *.TXT living in ./texts
This is currently aimed at HARDWARE.TXT but works for things like RELNOTES.TXT
too.

Reviewed by: jkh
2000-01-19 22:48:50 +00:00
green
c67a07f904 Implement -g and -d options in my ident code. The -g flag uses a random
garbage value for the username (hex garbage, that is), and the -d flag
provides a default username for fallback purposes if the user cannot be
looked up.  That is very useful for the case where inetd auth is
running on a NAT box.

While I'm here updating the manpage, clean up an English error and a
few small nits.
2000-01-19 22:03:12 +00:00
chris
c3602b40ed - Use proper markup for a section header.
- Replace nonexistent OPIE_PROMPT_MAX with OPIE_CHALLENGE_MAX

PR:		16209
Submitted by:	Tetsuro Furuya <tfuruya@ppp142197.asahi-net.or.jp>
2000-01-19 21:54:19 +00:00
ru
1ac5a2b5a0 New install-info(1) correctly fails to install ENTRY for file FOO
if ENTRY already exists for file FOO2 in /usr/share/info/dir.

So, re-init /usr/share/info/dir unconditionally at installworld.
2000-01-19 19:18:50 +00:00
wpaul
28f55e3f8e Add support for the Davicom DM9102A 10/100 ethernet controller chip.
This is just to make sure we initialize the chip correctly: we need to
make the sure the port select bit in CSR6 is set properly so that we
use the internal PHY for 10/100 support. (The eval boards I have also
include an external HomePNA PHY, but I need to play with that more
before I can support it.)
2000-01-19 19:03:08 +00:00
obrien
67fda16932 Change the error message to be the FreeBSD one, not the OSF/1 one. 2000-01-19 18:36:01 +00:00
jkh
67e9a9c57f Add parallel port clock driver.
Submitted by:	Sascha Schumann <sascha@schumann.cx>
2000-01-19 18:19:16 +00:00
jkh
d9684b5bfd Import simple driver for a parallel port radio clock which receives
the German legal time (commonly available in Europe).

Submitted by:	Sascha Schumann <sascha@schumann.cx>
2000-01-19 18:17:25 +00:00
jkh
a90388ad5b Add device entries for new parallel port radio clock driver.
We were supposed to get these in far earlier and didn't, hence
the commit after feature freeze.  A promise is a promise. :)

Submitted by:	Sascha Schumann <sascha@schumann.cx>
2000-01-19 18:16:24 +00:00
imp
f7f2d53f1e Add entries for:
3com 3c589ET
	Simple Technology CF ATA flash cards
	Viking Components CF ATA flash cards
2000-01-19 17:27:56 +00:00
imp
bb408b37c4 Add recent entries:
CAM version bump
	gnu texinfo
	pccardd/pccardc recompile to match kernel ioctls
2000-01-19 17:18:43 +00:00
sheldonh
ad9f304ef9 Although it should be obvious that the 3-digit numeric values of the
characters shown are octal, state this explicitly for the easily
misled.
2000-01-19 16:21:05 +00:00
joe
34f25d6907 It's not been possible to configure a print server running lpd,
with remote hosts feeding it, so that some hosts have their header
pages supressed and some don't.  This is because lpd doesn't know
how to rewrite a print job before forwarding it to a remote lpd.
In particular this causes problems with p rinters that contain
their own lpd, eg. HP jet direct cards, because they can't suppress
headers.  It's not possible to have headers supressed by putting
'sh' in any printcap in the lpd chain, it is up to the originating
lpr to have a '-h' option specified at run time.

Lpr has been modified to allow _it_ to honour the 'sh' flag in the
local print cap.  This allows the administrator to switch off
headers for a particular printer (on a particular host) irrespective
of whether that printer is local to the machine or remote.

This doesn't break anything, because in the case of a remote printer
the 'sh' flag would have had no meaning, in the case of the local
printer it would have been on anyway.

Submitted by:	Scott James Remnant <scott@pavilion.net>
2000-01-19 14:25:08 +00:00
sheldonh
74366b47ef Make the quotes in the #include line visible. 2000-01-19 13:27:03 +00:00
ru
3710f9234c Do not set the default terminal type to "su", leave it empty.
PR:		bin/5084
Reviewed by:	asmodai, davidn, sef
2000-01-19 10:54:44 +00:00
ru
bcb6fab385 ${.MAKE} -> ${MAKE}
Reviewed by:	hoek
2000-01-19 10:44:28 +00:00
obrien
f093c3cc6c Utility to control the printing of "Fixed up unaligned data access for pid
nnn at pc 0xADDR" and the fixup of the UA fault on the DEC Alpha when an
unaligned access fault happens.  Modeled after the OSF/1 utility of the
same name.

Submitted by:	gallatin
2000-01-19 09:47:19 +00:00
sos
0b63e1ef02 Quantify the calls to ad_attach and atapi_attach so that diskless
or atapiless kernels can be built.
2000-01-19 07:25:46 +00:00
jasone
0b9957ff21 Implement continuations to correctly handle [sig|_]longjmp() inside of a
signal handler.  Explicitly check for jumps to anywhere other than the
current stack, since such jumps are undefined according to POSIX.

While we're at it, convert thread cancellation to use continuations, since
it's cleaner than the original cancellation code.

Avoid delivering a signal to a thread twice.  This was a pre-existing bug,
but was likely unexposed until these other changes were made.

Defer signals generated by pthread_kill() so that they can be delivered on
the appropriate stack.  deischen claims that this is unnecessary, which is
likely true, but without this change, pthread_kill() can cause undefined
priority queue states and/or PANICs in [sig|_]longjmp(), so I'm leaving
this in for now.  To compile this code out and exercise the bug, define
the _NO_UNDISPATCH cpp macro.  Defining _PTHREADS_INVARIANTS as well will
cause earlier crashes.

PR:			kern/14685
Collaboration with:	deischen
2000-01-19 07:04:50 +00:00
jasone
2c6582da15 Make minor entry point changes to support libc_r. 2000-01-19 07:01:40 +00:00
rwatson
bfcdbb7508 Fix bde'isms in acl/extattr syscall interface, renaming syscalls to
prettier (?) names, adding some const's around here, et al.

This is commit 4 out of 3, updating the userland library to reflect kernel
interface changes.

Reviewed by:	bde
2000-01-19 06:13:59 +00:00
wpaul
81ac67ad74 Close PR#16028. Make the sanity check saner. The condition that we
check for on the server may arise legitimately on the client. The
correct way to check for a zero record length is to check for it
without the LAST_FRAG marker in it, since it's legal to send a LAST_FRAG
marker with 0 bytes of data.

PR:		misc/16028
2000-01-19 06:12:32 +00:00
rwatson
f2d8638a5c Fix bde'isms in acl/extattr syscall interface, renaming syscalls to
prettier (?) names, adding some const's around here, et al.

Reviewed by:	bde
2000-01-19 06:07:34 +00:00
rwatson
3a39a81644 Fix bde'isms in acl/extattr syscall interface, renaming syscalls to
prettier (?) names, adding some const's around here, et al.

Commit 2 out of 3.

Reviewed by:	bde
2000-01-19 06:02:31 +00:00
rwatson
e6adc4e6db Fix bde'isms in acl/extattr syscall interface, renaming syscalls to
prettier (?) names, adding some const's around here, et al.

Commit 1 out of 3.

Reviewed by:	bde
2000-01-19 06:01:07 +00:00
chris
5abc54f36b Document KERN_QUANTUM under CTL_KERN
PR:		15637
Submitted by:	jhs
2000-01-19 05:32:27 +00:00
chris
0d97bae686 Document isnanf() for checking if a float is NaN (``Not-a-Number'') and
create a link from isnanf.3 to isinf.3.

PR:		13878
2000-01-19 04:58:39 +00:00
chris
87094c8006 Document truncation of strings when a NUL character is reached in a format
string.

PR:		15929
Submitted by:	Daniel Hagan <dhagan@cs.vt.edu>
2000-01-19 04:16:48 +00:00
kris
0e638ddc72 Require USA_RESIDENT to be 'NO' or 'YES' if building secure/
Reviewed by:	marcel
2000-01-19 04:03:48 +00:00
msmith
1cbf0ebcec Reference machine/param.h rather than the nonexistent
machine/machparam.h in a comment

PR:		kern/11178, kern/16128
2000-01-19 01:26:06 +00:00
wpaul
a3e3508a66 Fix a couple of bugs:
- The busy wait hack in usbdi.c was doing its timeout in microseconds
  instead of milliseconds.
- if_aue.c:aue_intr() is creating a bitmask by and'ing two bits when it
  should be or'ing them.

Submitted by:	Lennart Augustsson
2000-01-19 01:01:56 +00:00