annoying verbose boot error of the form
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
The ident returned by bhyve is a text string 'BHYVE-XXXX-XXXX', where
the X's are the first bytes of the md5 hash of the backing filename.
Reviewed by: neel
Approved by: re (gjb)
mount.devfs but mounts fdescfs. The mount happens just after
mount.devfs.
- rc.d/jail now displays whole error message from jail(8) when a jail
fails to start.
Approved by: re (gjb)
services configuration and enable it by default. Committed with
slight change to menu text for length and content.
Submitted by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
Patch from PR modified slightly for whitespace and style.
PR: bin/161547
Submitted by: Warren Block <wblock@wonkity.com>
Reviewed by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
keymaps *and* provide a mechanism for testing the selection. With
this commit, bsdinstall is no longer dependent on kbdmap(1). The
keymap test menu was originally submitted by Warren Block but was
modified).
Submitted by: Warren Block <wblock@wonkity.com>
Reviewed by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
to run interactively but it can be scripted too (optinally completely
non-interactive). Currently supports GELI and all ZFS vdev types. Also
performs validation on selections/settings providing error messages if
necessary, explaining (in plain language) what the issue is. Currently
the auto partitioning of naked disks only supports GPT and MBR (VTOC8
pending for sparc64), so is only available for i386/amd64 install.
Submitted by: Allan Jude <freebsd@allanjude.com>, myself
Reviewed by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
newly installed system. This should greatly increase the amount of
entropy available when SSH host keys are generated during first boot.
Reviewed by: markm, nathanw
Approved by: re (gjb)
determining when a script wants to be nonInteractive but selectively
wants ZFS operations to be *interactive* (this is analgous to already
existing $VAR_NETINTERACTIVE (netInteractive) and f_netinteractive()
used for the same purpose (script wants to be nonInteractive but wants
network operations to be *interactive*).
Approved by: re (glebius)
if you ended up in f_dialog_*_constrain() (indirectly, of course) with a
purposefully-set NULL height, width, or rows parameter (because you didn't
care to have that attribute calculated). Fix typo in a comment while here.
Approved by: re (glebius)
command line options. The "jail_<jname>_*" rc.conf(5) variables for
per-jail configuration are automatically converted to
/var/run/jail.<jname>.conf before the jail(8) utility is invoked.
This is transparently backward compatible.
- Fix a minor bug in jail(8) which prevented it from returning false
when jail -r failed.
Approved by: re (glebius)
the 2 read-only bytes at the start of a PCI capability.
This is the sequence that OpenBSD uses when enabling
MSI interrupts, and works fine on real h/w.
In bhyve, convert the 4 byte write to a 2-byte write to
the r/w area past the first 2 r/o bytes of a capability.
Reviewed by: neel
Approved by: re@ (blanket)
throughout the bsdconfig(8) code. While we're here, add an explicit argument
to lvalue-seeking invocations of "return" that previously had no argument.
Also, consolidate a single instance of double-newline and remove some
comments that are no longer required (given increased readability with new
exit codes).
Approved by: re (glebius)
"assignment makes pointer from integer without a cast", by changing the
cmd_lst and rbis members of struct ahci_port from integers to pointers.
Also surround a pow-of-2 test expression with parentheses to clarify it,
and avoid another gcc warning.
Approved by: re (glebius)
Reviewed by: grehan, mav
rather than opt-out.
Prior to this change if the "-g" option was not specified then a listening
socket for tunneling gdb packets would be opened at port 6466. If a second
virtual machine is fired up, also without the "-g" option, then that would
fail because there is already a listener on port 6466.
After this change if a gdb tunnel port needs to be created it needs to be
explicitly specified with a "-g <portnum>" command line option.
Reviewed by: grehan@
Approved by: re@ (blanket)
Make the amd64/pmap code aware of nested page table mappings used by bhyve
guests. This allows bhyve to associate each guest with its own vmspace and
deal with nested page faults in the context of that vmspace. This also
enables features like accessed/dirty bit tracking, swapping to disk and
transparent superpage promotions of guest memory.
Guest vmspace:
Each bhyve guest has a unique vmspace to represent the physical memory
allocated to the guest. Each memory segment allocated by the guest is
mapped into the guest's address space via the 'vmspace->vm_map' and is
backed by an object of type OBJT_DEFAULT.
pmap types:
The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT.
The PT_X86 pmap type is used by the vmspace associated with the host kernel
as well as user processes executing on the host. The PT_EPT pmap is used by
the vmspace associated with a bhyve guest.
Page Table Entries:
The EPT page table entries as mostly similar in functionality to regular
page table entries although there are some differences in terms of what
bits are used to express that functionality. For e.g. the dirty bit is
represented by bit 9 in the nested PTE as opposed to bit 6 in the regular
x86 PTE. Therefore the bitmask representing the dirty bit is now computed
at runtime based on the type of the pmap. Thus PG_M that was previously a
macro now becomes a local variable that is initialized at runtime using
'pmap_modified_bit(pmap)'.
An additional wrinkle associated with EPT mappings is that older Intel
processors don't have hardware support for tracking accessed/dirty bits in
the PTE. This means that the amd64/pmap code needs to emulate these bits to
provide proper accounting to the VM subsystem. This is achieved by using
the following mapping for EPT entries that need emulation of A/D bits:
Bit Position Interpreted By
PG_V 52 software (accessed bit emulation handler)
PG_RW 53 software (dirty bit emulation handler)
PG_A 0 hardware (aka EPT_PG_RD)
PG_M 1 hardware (aka EPT_PG_WR)
The idea to use the mapping listed above for A/D bit emulation came from
Alan Cox (alc@).
The final difference with respect to x86 PTEs is that some EPT implementations
do not support superpage mappings. This is recorded in the 'pm_flags' field
of the pmap.
TLB invalidation:
The amd64/pmap code has a number of ways to do invalidation of mappings
that may be cached in the TLB: single page, multiple pages in a range or the
entire TLB. All of these funnel into a single EPT invalidation routine called
'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and
sends an IPI to the host cpus that are executing the guest's vcpus. On a
subsequent entry into the guest it will detect that the EPT has changed and
invalidate the mappings from the TLB.
Guest memory access:
Since the guest memory is no longer wired we need to hold the host physical
page that backs the guest physical page before we can access it. The helper
functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose.
PCI passthru:
Guest's with PCI passthru devices will wire the entire guest physical address
space. The MMIO BAR associated with the passthru device is backed by a
vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that
have one or more PCI passthru devices attached to them.
Limitations:
There isn't a way to map a guest physical page without execute permissions.
This is because the amd64/pmap code interprets the guest physical mappings as
user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U
shares the same bit position as EPT_PG_EXECUTE all guest mappings become
automatically executable.
Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews
as well as their support and encouragement.
Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing
object for pci passthru mmio regions.
Special thanks to Peter Holm for testing the patch on short notice.
Approved by: re
Discussed with: grehan
Reviewed by: alc, kib
Tested by: pho
these.
The mux-vcpus option may return at some point, given it's utility
in finding bhyve (and FreeBSD) bugs.
Approved by: re@ (blanket)
Discussed with: neel@
Sort the filenames to get a consistent result between machines of the same
architecture.
Also, sort FTS_D entries after other entries so kldxref -R works properly in
the uncommon case that a directory contains both subdirectories and modules.
Previously, this may have happened to work, depending on the order of files
in the directory.
PR: bin/182098
Submitted by: Derek Schrock (original version)
Tested by: Derek Schrock
Approved by: re (delphij)
MFC after: 1 week
https://wiki.freebsd.org/SummerOfCode2013/bhyveAHCI
This provides ICH8 SATA disk and ATAPI ports, selectable
via the bhyve slot command-line parameter:
SATA
-s <slot>,ahci-hd,<image-file>
ATAPI
-s <slot>,ahci-cd,<image-file>
Slight modifications by: grehan@
Approved by: re@ (blanket)
Obtained from: FreeBSD GSoC'13
pointed out, having additional nameservers listed in /etc/resolv.conf
can break DNSSEC verification by providing a false positive if unbound
returns SERVFAIL due to an invalid signature. The downside is that
the domain / search path won't get updated either, but we can live
with that.
Approved by: re (blanket)
Fix a bug in HTTP checking/fetching. Add Main Site to HTTP menu. Add new
example script browse_packages_http.sh and move existing example script
browse_packages.sh -> browse_packages_ftp.sh
Reviewed by: gjb, brd
Approved by: re (gjb), clusteradm (brd)
MFC after: 3 days
generates a configuration suitable for running unbound as a caching
forwarding resolver, and configures resolvconf(8) to update unbound's
list of forwarders in addition to /etc/resolv.conf. The initial list
is taken from the existing resolv.conf, which is rewritten to point to
localhost. Alternatively, a list of forwarders can be provided on the
command line.
To assist this script, add an rc.subr command called "enabled" which
does nothing except return 0 if the service is enabled and 1 if it is
not, without going through the usual checks. We should consider doing
the same for "status", which is currently pointless.
Add an rc script for unbound, called local_unbound. If there is no
configuration file, the rc script runs local-unbound-setup to generate
one.
Note that these scripts place the unbound configuration files in
/var/unbound rather than /etc/unbound. This is necessary so that
unbound can reload its configuration while chrooted. We should
probably provide symlinks in /etc.
Approved by: re (blanket)
