The appropriate subdirectories are handled by lib/csu/Makefile. There's
no need to duplicate this logic in Makefile.inc1 and lib/Makefile.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2523
(Makefile.inc1): add dependency of xinstall on libmd to
avoid failure of parallel bootstrap.
(lib/libmd/*.h): do not redefine symbols if already
defined as macros (libcrypt uses the same sources internally,
redefining symbols with a prefix of its own).
Fixes build failures caused by previous change to libmd.
Reported by: ian
Pointy hat to: thomas
if its set in the environement of each command seperately.
Move the PATH setting to the NXBMAKE variable so its picked up to find
the one-off gperf build for the native-xtools target.
Pointed Out by: ngie
enabled host. Build a one-off gperf and put it in the PATH for the rest
of the target so the ONE call to gperf by the gcc build picks it up and
DTRT.
Reviewed by: imp
make bootstrap-tools
On the plus side, this also greatly reduces complexity
MFC after: 1 week
Pointyhat to: ngie
Reported by: Willem Jan Withagen <wjw@digiware.nl>
stopped using kgzip in the release process. We no longer need to build
kgzip as a cross tool, and tests for RELEASEDIR are obsolete, so
remove both.
Differential Revision: https://reviews.freebsd.org/D2313
parallelization work done in r279197
- kerberos5/lib/libroken requires kerberos5/tools/make-roken to build
- kerberos5/tools/asn1_compile, kerberos5/tools/slc, and usr.bin/compile_et
require kerberos5/lib/libroken and kerberos5/lib/libvers
This race is incredibly evident when cross-building sparc64 on
ref10-amd64.freebsd.org
MFC after: 1 week
Pointyhat to: ngie
stage, just like for the regular world stage.
Reviewed by: rodrigc, imp, bapt, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D2187
As legacy executes "make installincludes" we don't want it to be
disabled by a src.conf setting.
Reviewed by: imp
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2143
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This fixes C++ libraries not implicitly linking in libc++. This is
generally not an issue because the final linking with the compiled binary
will involve CXX via PROG_CXX or other means. It is however
inconsistent with libraries implicitly linking in libc and problematic
for trying to build libraries with '-z defs' to ensure all direct
dependencies are linked in.
libatf-c++ is currently the only consumer of this new feature.
Differential Revision: https://reviews.freebsd.org/D2039
Reviewed by: imp
Discussed with: bapt
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The in-tree binutils does not support arm64, so will not work for the
forthcoming FreeBSD arm64 port. BROKEN_OPTIONS will include
BINUTILS_BOOTSTRAP, so provide a default CROSS_BINUTILS_PREFIX for this
case.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
inadvertently removed when support for external GCC was added.
Deprecate XFLAGS in favour of the newer XCFLAGS/XCXXFLAGS.
Tested with: make universe, make CROSS_COMPILER_PREFIX=/usr/bin/ buildworld
Reviewed by: imp, bapt
libarchive(3) doesn't support the new liblzma API yet, but this change
allows us to enable multi-threaded xz compression.
``make release'' should now finish in half the time on a machine with
several cores and fast disks (our typical build server).
This behaviour only applies when building a release and it doesn't
affect buildworld/installworld. To disable threaded xz compression,
set XZ_THREADS=1.
Reviewed by: gjb
Tested by: gjb
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
This brings support for multi-threaded compression. This brings close
N times faster compression where N is the number of CPU cores.
Because of this, liblzma now depends on libthr.
Soon libarchive will be modified to use the new lzma API.
Thanks to antoine@ for the exp-run.
Differential Revision: https://reviews.freebsd.org/D1786
Reviewed by: bapt
Addr2line is not required for the build, and a per-arch binary is no
longer required with the switch to the ELF Tool Chain. However, building
these tools during the cross tools stage can be useful for developers
who cross build HEAD from stable/10, and adds very little to the build
time.
Reviewed by: ian, imp
Differential Revision: https://reviews.freebsd.org/D1583
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
Previously it also disabled building elftoolchain bootstrap tools such as
strip(1).
Differential Revision: https://reviews.freebsd.org/D1398
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
ensure that building on a host without makeinfo (i.e. a host where
make delete-old -DWITHOUT_INFO was run), then building with MK_INFO == yes
doesn't manifest in build errors when building info pages
This manifested itself like the following when I was build testing an MFC
change on stable/10:
makeinfo --no-split -I /usr/src/gnu/lib/libregex/doc -I /usr/src/gnu/lib/libregex/doc regex.texi -o regex.info
makeinfo: not found
*** [regex.info] Error code 127
make[6]: stopped in /usr/src/gnu/lib/libregex/doc
1 error
Tested on a head VM without makeinfo installed and by building with MK_INFO=yes
MFC after: 1 week
The work in r258233 hardcoded the assumption that tests was the last component
of the tests tree by pushing tests as an explicit prefix for the paths in
BSD.tests.dist and /usr was the prefix for all tests, per BSD.usr.dist and all
of the mtree calls used in Makefile.inc1. This assumption breaks if/when one
provides a custom TESTSBASE "prefix", e.g. TESTSBASE=/mytests .
One thing that r258233 did properly though was remove "/usr/tests" creation
from BSD.usr.dist -- that should have not been there in the first place. That
was an "oops" on my part for the work that was originally committed in r241823
MFC after: 2 weeks
Phabric: D1301
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
when strip gets replaced at install time by adding it to ITOOLS for the
default usr.bin/xinstall STRIP_CMD
This will fix the failure noted in this Jenkins build step:
https://jenkins.freebsd.org/job/Build-UFS-image/688/
This will also fix the issue reported by alfred@ dealing with installing on
targets that differ from build hosts (e.g. installing on i386/i386 when built
on amd64/amd64)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will fix installation with differing host targets in installworld, so
one can build i386/i386 on an amd64 host, then install to an i386/i386 target
Reported by: alfred
Phabric: D1280
MFC after: 1 week
This will unbreak the build when "env MK_CXX=no make delete-old" has been run
on the build host post-r272849
Tested with the following commands:
/bin/sh
export __MAKE_CONF=/dev/null SRCCONF=/dev/null
export MK_CLANG=no MK_CLANG_BOOTSTRAP=no MK_GCC=yes MK_GCC_BOOTSTRAP=yes
export MK_GNUCXX=yes TARGET=armv6 TARGET_ARCH=arm make xdev
make toolchain
make xdev-build
sudo -E make xdev-install
/usr/armv6-freebsd/usr/bin/cc -dumpmachine | grep arm
X-MFC with: r272849
Reported by: Dan Raymond <draymond@foxvalley.net>, gjb
if/when MK_CXX == no and make delete-old has been run on the build host,
post-r272849
Tested with the following command:
% sudo env MK_CLANG=no MK_CLANG_BOOTSTRAP=no MK_GCC=yes MK_GCC_BOOTSTRAP=yes \
MK_GNUCXX=yes make xdev
Set WITH_ELFTOOLCHAIN_TOOLS in src.conf to use the elftoolchain version
of the following tools:
* addr2line
* elfcopy (strip / mcs)
* nm
* size
* strings
Reviewed by: bapt (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1224
