RPI is using the firmware provided DTS since 12.0
Pandaboard works with the Linux DTS
RK* Exynos* and Meson*/Odroid* don't even work with current
source code, if someone wants to make them work again they
better use the Linux DTS.
was unlocked and yet the bucket-unlock flag was not
changed to false. This can cause a panic if INVARIANTS
is on and we go through the right path (though rare).
This fixes the correct bug :)
Reported by: syzbot+179a1ad49f3c4c215fa2@syzkaller.appspotmail.com
Reviewed by: tuexen@
cache_lookup's documentation got dislocated by r324378. Relocate and expand
it.
Reviewed by: jhb, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
While it is true that the ACPI spec says that the flag is only valid
on Extended Address Space Descriptors, examples of other descriptors
in the spec use the ProducerConsumer flag explicitly, and real
hardware uses it as well. In fact, even in the ASL of the Thunder X2
for which r330113 was a workaround, some devices use this flag on
non-Extended Address Space Descriptors correctly. Instead, only
ignore the flag for resources associated with the UART devices on the
Thunder X2 using the "ARMH0011" HID to identify these devices.
This should fix regressions from ignoring this flag in other contexts
such as Hyper-V.
PR: 235876
Reported by: Wei Hu <weh@microsoft.com>
Tested by: emaste (Thunder X2)
MFC after: 2 weeks
Provide a convenience function to avoid the hack with filling fake
struct vop_fsync_args and then calling vop_stdfsync().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If truncate(2) is performed on msdosfs file, which extends the file by
system-depended large amount, fs creates corresponding amount of dirty
delayed-write buffers, which can consume all buffers. Such buffers
cannot be flushed by the bufdaemon because the ftruncate() thread owns
the vnode lock. So the system runs out of free buffers, and even
truncate() thread starves, which means deadlock because it owns the
vnode lock.
Fix this by doing vnode fsync in extendfile() when low memory or low
buffers condition detected, which flushes all dirty buffers belonging
to the file being extended.
Note that the more usual fallback to bawrite() does not work
acceptable in this situation, because it would only allow one buffer
to be recycled. Other filesystems, most important UFS, do not allow
userspace to create arbitrary amount of dirty delayed-write buffers
without feedback, so bawrite() is good enough for them.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
CPUs can use shared (RF_SHAREABLE) resources for the I/O port used for
entering and exiting C states. If this I/O port is included in an ACPI
system resource device, then this happens to still work, but if the port
wasn't part of a system resource device, only the first CPU could allocate
the I/O port and use C states since resource_list_reserve() was always
allocating the resource from nexus0 without RF_SHAREABLE. By avoiding
the reservation, the flags from the bus_alloc_resource() in the CPU driver
(which include RF_SHAREABLE) are honored.
PR: 236513
Reported by: stockhausen@collogia.de
Sleuthing by: avg
Reviewed by: avg
MFC after: 2 weeks
Some early PCIe chipsets are explicitly listed in the white-list to
enable use of the MMIO config space accesses, perhaps because ACPI
tables were not reliable source of the base MCFG address at that time.
For that chipsets, MCFG base was read from the known chipset MCFGbase
config register.
During very early stage of boot, when access to the PCI config space
is performed (see e.g. pci_early_quirks.c), we cannot map 255MB of
registers because the method used with pre-boot pmap overflows initial
kernel page tables.
Move fallback to read MCFGbase to the attachment method of the
x86/legacy device, which removes code duplication, and results in the
use of io accesses until MCFG is parsed or legacy attach called.
For amd64, pre-initialize cfgmech with CFGMECH_1, right now we
dynamically assign CFGMECH_1 to it anyway, and remove checks for
CFGMECH_NONE.
There is a mention in the Intel documentation for corresponding
chipsets that OS must use either io port or MMIO access method, but we
already break this rule by reading MCFGbase register, so one more
access seems to be innocent.
Reported by: longwitz@incore.de
PR: 236838
Reviewed by: avg (other version), jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19833
RTL8152 (chip version URE_CHIP_VER_4C10) doesn't
have hardwired MAC address, in other words, it is all zeros.
This commit fixes it by setting random MAC address
when MAC address is all zeros.
Reviewed by: kevlo
Differential Revision: https://reviews.freebsd.org/D19856
$() is more modern and also nests. Convert the mix of styles to using
only the former (although the latter was more common). It's the more
dominant style in other shell scripts these days as well.
Differential Revision: https://reviews.freebsd.org/D19840
In particular, ensure that writers are not unleashed before SU
structures are initialized. Also, correctly handle MNT_ASYNC before
this.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
descriptor, not the file descriptor. The file descriptor is used only for
verification so do not expect any additional capabilities on it.
Reported by: antoine
Tested by: antoine
Discussed with: kib, emaste, bapt
Sponsored by: Fudo Security
Both linux and u-boot sources for RTL8152 driver has this value.
RTL8152 USB ethernet is used in NanoPI R1 board as second ethernet.
This fixes for me RTL8152 USB ethernet not detected problem after
reboot on NanoPI R1 board.
Both NetBSD and OpenBSD have a wrong value so far.
All variable assignments that start in column 1 have to be on a single
line for amd to build due to as weird dependency there (most likely it
can be fixed to use the new VARS_ONLY feature, but it isn't
today). usr.sbin/amd/include/Makefile calls
usr.sbin/amd/include/newvers.sh which does:
eval `LC_ALL=C egrep '^[A-Z]+=' $1 | grep -v COPYRIGHT`
which is where that requirement comes from. It handles COPYRIGHT since
that's an exception. Rather than add additional exceptions, cope with
the long line in newvers.sh instead. Note: it no longer needs to
filter COPYRIGHT because the assignment doesn't start in column 1
anymore.
I had done a universe when I had an earlier version of r346018 that
had it as one line. When I changed it to multi-line as suggested in
the review, I only built kernels on a couple of architectures to make
sure it didn't break anything.
Add comment to newvers.sh noting this.
Obviously, this unbreaks the amd build.
In certain scenarios, it is possible for PCPU data to be
accessed before it has been initialized (e.g. during printf
if the kernel was built with the TSLOG option).
Initialize the PCPU pointer for hart 0 at the beginning of
initriscv() rather than near the end.
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D19726
Such processes will be reparented to the reaper when the current
parent is done with them (i.e., ptrace detached), so p_oppid must be
updated accordingly.
Add a regression test to exercise this code path. Previously it
would not be possible to reap an orphan with a stale oppid.
Reviewed by: kib, mjg
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19825
'tos' is an index into an array and never holds a negative value. Correct
its signedness to match PCTRIE_LIMIT, which it is compared to in assertions.
No functional change (kills a warning).
The kernel code uses UDP to do upcalls to the nfsuserd(8) daemon to get
updates to the username<->uid and groupname<->gid mappings.
A change to AF_LOCAL last year had to be reverted, since it could result
in vnode locking issues on the AF_LOCAL socket.
This patch adds INET6 support and the required #ifdef INET and INET6
to the code.
Requested by: bz
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: http://reviews.freebsd.org/D19218
Don't page fault if the file descriptor provided with "-o fd" is invalid.
This is a merge of r345419 from the projects/fuse2 branch.
Reviewed by: ngie
Tested by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19836
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
* The BIO bio_data may not be page aligned. Only the base address of each
page worth of data is extracted to pass to OPAL. Without page alignment
it can scribble over random memory when finishing the page read. Fix this
by short-reading the first page to properly align for full page reads.
* Fix the definition of OPAL_FLASH_ERASE.
* Properly handle the async message result, as now returned from r345974.
* Properly return the full opal_msg from an async completion.
* Don't keep bugging OPAL, wait 100us or so. With some minor changes to
DELAY() to drop to very low priority, the thread won't hog the CPU while
polling for the async completion.
It performs BUS_RESET_CHILD() on the parental bus and the specified
device.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
For PCI device (i.e. child of a PCI bus), reset tries FLR if
implemented and worked, and falls to power reset otherwise.
For PCIe bus (child of a PCIe bridge or root port), reset
disables PCIe link and then re-trains it, performing what is known as
link-level reset.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
The methods BUS_RESET_PREPARE(), BUS_RESET(), and BUS_RESET_POST()
should be implemented by bus which can provide reset to a device. The
methods are described in inline doxygen comments.
Code only provides BUS_RESET_PREPARE() and BUS_RESET_POST() helpers
instead of default implementation, because actual bus needs to handle
device state around reset, while helpers provide the other half of
typical prepare/post code.
Reviewed by: imp (previous version), jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19646
Otherwise we might miss the last iteration where EOF appears below
unaligned noff.
Reported and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19811
Add the ability to use interrupts for i2c message.
We still use polling for early boot i2c transfer (for PMIC
for example) but as soon as interrupts are available use them.
On Allwinner SoC >A20 is seems that polling mode is broken for some
reason, this is now fixed by using interrupt mode.
For Allwinner also fix the frequency calculation, the one in the code
was for when the APB frequency is at 48Mhz while it is at 24Mhz on most
(all?) Allwinner SoCs. We now support both cases.
While here add more debug info when it's compiled in.
Tested On: A20, H3, A64
MFC after: 1 month
Remove the phrase from boilerplate copyright we stick on vers.c when
we can't find the template file. In practice, this won't change a
thing, except for the case of compiling the kernel standalone w/o the
rest of a tree on a system that doesn't have
/usr/share/examples/etc/bsd-copyright installed.
r338192 reverted the changes to nfsuserd so that it could use an AF_LOCAL
socket, since it resulted in a vnode locking panic().
Post r338192 nfsuserd daemons use the old AF_INET socket for upcalls and
do not use these kernel changes.
I left them in for a while, so that nfsuserd daemons built from head sources
between r320757 (Jul. 6, 2017) and r338192 (Aug. 22, 2018) would need them
by default.
This only affects head, since the changes were never MFC'd.
I will add an UPDATING entry, since an nfsuserd daemon built from head
sources between r320757 and r338192 will not run unless the "-use-udpsock"
option is specified. (This command line option is only in the affected
revisions of the nfsuserd daemon.)
I suspect few will be affected by this, since most who run systems built
from head sources (not stable or releases) will have rebuilt their nfsuserd
daemon from sources post r338192 (Aug. 22, 2018)
This is being reverted in preparation for an update to include AF_INET6
support to the code.
There are a few places that use hand crafted versions of the macros
from sys/netinet/in.h making it difficult to actually alter the
values in use by these macros. Correct that by replacing handcrafted
code with proper macro usage.
Reviewed by: karels, kristof
Approved by: bde (mentor)
MFC after: 3 weeks
Sponsored by: John Gilmore
Differential Revision: https://reviews.freebsd.org/D19317
The code enabled when "DEBUG" is defined uses mem_alloc(), which is a
malloc(.., M_RPC, M_WAITOK | M_ZERO), but then calls gss_release_buffer()
which does a free(.., M_GSSAPI) to free the memory.
This patch fixes the problem by replacing mem_alloc() with a
malloc(.., M_GSSAPI, M_WAITOK | M_ZERO).
This bug affects almost no one, since the sources are not normally built
with "DEBUG" defined.
Submitted by: peter@ifm.liu.se
MFC after: 2 weeks
provider grows, GELI will expand automatically and will move the metadata
to the new location of the last sector.
This functionality is turned on by default. It can be turned off with the
-R flag, but it is not recommended - if the underlying provider grows and
automatic expansion is turned off, it won't be possible to attach this
provider again, as the metadata is no longer located in the last sector.
If the automatic expansion is turned off and the underlying provider grows,
GELI will only log a message with the previous size of the provider, so
recovery can be easier.
Obtained from: Fudo Security
In r337703 DTS files were updated to Linux 4.18, including Linux commit
4d8b032d3c03f4e9788a18bbb51b10e6c9e8a56b which removed the `phy_id`
property from am335x-bone-common (as the property was deprecated).
Use `phy-handle` via fdt_get_phyaddr, keeping the existing code as a
fallback for old DTBs.
PR: 236624
Submitted by: manu, Gerald Aryeetey <aryeeteygerald_rogers.com>
Reported by: Gerald Aryeetey
Reviewed by: manu
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19814
Despite the call to vtruncbuf() from detrunc(), which results in
zeroing part of the partial page after EOF, there still is a
possibility to retain the stale data which is revived on file
enlargement. If the filesystem block size is greater than the page
size, partial block might keep other after-EOF pages wired and they
get reused then. Fix it by zeroing whole part of the partial buffer
after EOF, not relying on vnode_pager_setsize().
PR: 236977
Reported by: asomers
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Harvesting has to compete for the TPM chip with userspace.
Before this change the callout could hijack an unread buffer
causing a userspace call to the TPM to fail.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: delphij
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19712
The e5500 has an FPU, but lacks the optional fsqrt instruction. This
instruction gets emulated in the kernel, but the emulation uses stale data,
from the last switch out, and does not return the result of the operation
immediately. Fix both of these conditions by saving and restoring the FPRs
around the emulation point.
MFC after: 1 week
MFC with: r345829
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
This fix was committed less than 2 months after the code was forked into the
powerpc kernel. Though powerpc doesn't use quad-precision floating point,
or need it for emulation, the changes do look like correctness fixes
overall.
This was found while trying to get fsqrt emulation working on e5500, which
does have a real FPU, but lacks the fsqrt instruction. This is not the
complete fix, the rest is to be committed separately.
MFC after: 1 week
When a new client structure was allocated, it was added to the list
so that it was visible to other threads before the expiry time was
initialized, with only a single reference count.
The caller would increment the reference count, but it was possible
for another thread to decrement the reference count to zero and free
the structure before the caller incremented the reference count.
This could occur because the expiry time was still set to zero when
the new client structure was inserted in the list and the list was
unlocked.
This patch fixes the race by initializing the reference count to two
and initializing all fields, including the expiry time, before inserting
it in the list.
Tested by: peter@ifm.liu.se
PR: 235582
MFC after: 2 weeks
Before this I suppose it was impossible load CAM-based NVMe as module.
Plus this appeared to be needed to build r345815 without NVMe driver.
MFC after: 2 weeks
interrupt enable are not fatal.
The firmware sets up all the interrupt enables based on run time
configuration, which means the information in the enables is more
accurate than what's compiled into the driver. This change also allows
the fatal bits to be updated without any changes in the driver in some
cases.
MFC after: 1 week
Sponsored by: Chelsio Communications
In particular:
- suspend the mount around vflush() to avoid new writes come after the
vnode is processed;
- flush pending metadata updates (mostly node times);
- remap all rw mappings of files from the mount into ro.
It is not clear to me how to handle writeable mappings on rw->ro for
tmpfs best. Other filesystems, which use vnode vm object, call
vgone() on vnodes with writers, which sets the vm object type to
OBJT_DEAD, and keep the resident pages and installed ptes as is. In
particular, the existing mappings continue to work as far as
application only accesses resident pages, but changes are not flushed
to file.
For tmpfs the vm object of VREG vnodes also serves as the data pages
container, giving single copy of the mapped pages, so it cannot be set
to OBJT_DEAD. Alternatives for making rw mappings ro could be either
invalidating them at all, or marking as CoW.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19737
In particular, this fixes atimes still changing for ro tmpfs.
tmpfs_set_status() gains tmpfs_mount * argument.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19737
o Fix bug in PLIC_ENABLE macro when irq >= 32.
Tested on the real hardware, which is HiFive Unleashed board.
Thanks to SiFive, Inc. for the board provided.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19775
* Crank the OPAL state machine during the receive loop, to make sure the
pollers are executed
* Add a proper detach function, so the module can be unloaded and reloaded
at runtime.
It still doesn't reliably work 100% of the time on POWER9, and it appears
timing and/or cache related. It may work on POWER8 now.
MFC after: 2 weeks
Since OPAL_GET_MSG does not discriminate between message types, asynchronous
completion events may be received in the OPAL_GET_MSG call, which dequeues
them from the list, thus preventing OPAL_CHECK_ASYNC_COMPLETION from
succeeding. Handle this case by integrating with the messaging framework.
Summary:
OPAL needs to be kicked periodically in order for the firmware to make
progress on its tasks. To do so, create a heartbeat thread to perform this task
every N milliseconds, defined by the device tree. This task is also a central
location to handle all messages received from OPAL.
Reviewed By: luporl
Differential Revision: https://reviews.freebsd.org/D19743
There is some code duplication in error handling paths in a few functions.
Create a function for printing such errors in human-readable way and get rid
of duplicates.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15912
Using DFLTPHYS/MAXPHYS is not always OK, instead make it possible for the
controller driver to provide maximum data size to MMCCAM, and use it there.
The old stack already does this.
Reviewed by: manu
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15892
I/O operations already in its queue were not being properly drained.
The GEOM framework does the queue draining, but the device driver
needs to wait for the draining to happen. The waiting is done by
adding a g_md_providergone() function to wait for the I/O operations
to finish up.
It is likely that every GEOM provider that implements orphaning
attached GEOM consumers needs to use the "providergone" mechanism
for this same reason, but some of them do not do so. Apparently
Kenneth Merry (ken@) added the drain for just such races, but he
missed adding it to some of the device drivers that needed it.
Submitted by: Chuck Silvers
Reviewed by: imp
Tested by: Chuck Silvers
MFC after: 1 week
Sponsored by: Netflix
Similar to bcm2835_sdhost.c add a TUNABLE and SYSCTL to selectively
turn on debugging printfs if debugging is turned on at compile time.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Reviewed by: gonzo, andrew
Differential Revision: https://reviews.freebsd.org/D19745
frame header and data.
This will fix 'Mysterious OLPC stuff' for received frames and wrong
CCMP / TKIP / data decoding for transmitted frames in net/wireshark
dissector.
While here, drop unneeded comment - net80211 handles padding requirements
for Tx & Rx without driver adjustment.
Tested with D-Link DWA-140 rev B3, STA mode.
MFC after: 1 week
Each control message region must be aligned on a 4-byte boundary on 32-bit
architectures. The 32-bit compat shim for recvmsg() gets the actual layout
right, but doesn't pad the payload length when computing msg_controllen for
the output message header. If a control message contains an unaligned
payload, such as the 1-byte TTL field in the example attached to PR 236737,
this can produce control message payload boundaries that extend beyond
the boundary reported by msg_controllen.
PR: 236737
Reported by: Yuval Pavel Zholkover <paulzhol@gmail.com>
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19768
stf(4) interfaces are not multicast-capable so they can't perform DAD.
They also did not set IFF_DRV_RUNNING when an address was assigned, so
the logic in nd6_timer() would periodically flag such an address as
tentative, resulting in interface flapping.
Fix the problem by setting IFF_DRV_RUNNING when an address is assigned,
and do some related cleanup:
- In in6if_do_dad(), remove a redundant check for !UP || !RUNNING.
There is only one caller in the tree, and it only looks at whether
the return value is non-zero.
- Have in6if_do_dad() return false if the interface is not
multicast-capable.
- Set ND6_IFF_NO_DAD when an address is assigned to an stf(4) interface
and the interface goes UP as a result. Note that this is not
sufficient to fix the problem because the new address is marked as
tentative and DAD is started before in6_ifattach() is called.
However, setting no_dad is formally correct.
- Change nd6_timer() to not flag addresses as tentative if no_dad is
set.
This is based on a patch from Viktor Dukhovni.
Reported by: Viktor Dukhovni <ietf-dane@dukhovni.org>
Reviewed by: ae
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19751
In particular, elf32 FreeBSD binaries were not executed on LP64 hosts.
The interp_name_len value should account for the nul terminator. This
is needed for strncmp()s in brand checking code to work.
Reported by: andreast
Sponsored by: The FreeBSD Foundation
MFC after: 12 days (together with r345661)
providers mediasize changes.
While here, use GEOM nomenclature to describe providers instead of calling
them device nodes.
Obtained from: Fudo Security
Tested in: AWS
When comparing best frequencies use the absolute value.
If we do not do that we end up choosing an always lower value than
the best one if the exact freq cannot be met.
MFC after: 2 weeks
Drop the adj_free field from vm_map_entry_t. Refine the max_free field
so that p->max_free is the size of the largest gap with one endpoint
in the subtree rooted at p. Change vm_map_findspace so that, first,
the address-based splay is restricted to tree nodes with large-enough
max_free value, to avoid searching for the right starting point in a
subtree where all the gaps are too small. Second, when the address
search leads to a tree search for the first large-enough gap, that gap
is the subject of a splay-search that brings the gap to the top of the
tree, so that an immediate insertion will take constant time.
Break up the splay code into separate components, one for searching
and breaking up the tree and another for reassembling it. Use these
components, and not splay itself, for linking and unlinking. Drop the
after-where parameter to link, as it is computed as a side-effect of
the splay search.
Submitted by: Doug Moore <dougm@rice.edu>
Reviewed by: markj
Tested by: pho
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D17794
The declaration in tcp_var.h is still around so t4_tom continued to
compile but wouldn't load. A separate commit will fix tcp_var.h
Reported By: Dustin Marquess (dmarquess at gmail)
Sponsored by: Chelsio Communications
