Tests that exercise the following flags are added in this commit:
- -A
- -H
- -I
- -g
- -h
- -k
- -m
Additional tests will be added soon.
MFC after: 1 month
* Verify that when creating a hard link to a symbolic link, '-L' option
creates a hard link to the target of the symbolic link
* Verify that when creating a hard link to a symbolic link, '-P' option
creates a hard link to the symbolic link itself
* Verify that if the target file already exists, '-f' option unlinks it so
that link may occur
* Verify that if the target file or directory is a symbolic link, '-shf'
option prevents following the link
* Verify that if the target file or directory is a symbolic link, '-snf'
option prevents following the link
* Verify that '-s' option creates a symbolic link
* Verify that '-w' option produces a warning if the source of a symbolic
link does not currently exist
Submitted by: shivansh
Reviewed by: asomers, ngie
MFC after: 1 month
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: https://reviews.freebsd.org/D11084
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
Verify that echo(1) does not...
- ... print the trailing newline character with option '-n'.
- ... print the trailing newline character when '\c' is appended to
the end of the string.
Submitted by: shivansh
Reviewed by: asomers, ngie
MFC after: 1 month
Sponsored by: Google, Inc (GSoC 2017)
Differential Revision: D11036
Items tested via this commit are:
- Some basic POSIX constants.
- Some valid programming environments with -v.
- Some invalid programming environments via -v.
NOTE: this test makes assumptions about ILP32/LP32 vs LP64 that are
currently not true on all architectures to avoid hardcoding some
architectures in the tests. I'm working on improving getconf(1) to be
more sane about handling ILP32/LP32 vs LP64. Future commits are coming
soon to address this.
MFC after: 2 weeks
Tested with: amd64, i386
Sponsored by: Dell EMC Isilon
These tests query a running process for information related to the -b,
-c, -e, and -f flags; the -f testcase is largely stubbed out, pending
additional work to determine a good, deterministic descriptor.
Core file test support is coming soon--it requires a bit more effort
due to the fact that:
- coredumps can be disabled (kern.coredump=0).
- corefiles can be put in different directories than the current
directory, or be named something other than `<prog>.core`
(`kern.corefile`).
MFC after: 2 months
Sponsored by: Dell EMC Isilon
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
Areas not covered still [positive functionality wise] are:
- sbuf_{clear,get,set}_flags
- sbuf_new (in particular, with fixed buffers, etc).
Some basic negative testing has been added, but more will be added in the
future.
This work was in part to validate work done by cem in r288223, and ian
before that.
MFC after: 2 months
Sponsored by: Dell EMC Isilon
- kvm_close: add a testcase to verify support for errno = EINVAL / -1
(see D10065) when kd == NULL is provided to the libcall.
- kvm_geterr:
-- Add a negative testcase for kd == NULL returning "" (see D10022).
-- Add two positive testcases:
--- test the error case using kvm_write on a O_RDONLY descriptor.
--- test the "no error" case using kvm_read(3) and kvm_nlist(3) as
helper routines and by injecting a bogus error message via
_kvm_err (an internal API) _kvm_err was used as there isn't a
formalized way to clear the error output, and because
kvm_nlist always returns ENOENT with the NULL terminator today.
- kvm_open, kvm_open2:
-- Add some basic negative tests for kvm_open(3) and kvm_open2(3).
Testing positive cases with a specific
`corefile`/`execfile`/`resolver` requires more work and would require
user intervention today in order to reliably test this out.
Reviewed by: markj
MFC after: 2 months
Sponsored by: Dell EMC Isilon
Differential Revision: D10024
This, like including ucl private headers, is useful for writing new base
system tools. Yes, anyone using these libraries shouldn't assume ABI
compatibility.
Reviewed by: bdrewery, bapt
Differential Revision: https://reviews.freebsd.org/D10123
the default partition, eMMC v4.41 and later devices can additionally
provide up to:
1 enhanced user data area partition
2 boot partitions
1 RPMB (Replay Protected Memory Block) partition
4 general purpose partitions (optionally with a enhanced or extended
attribute)
Of these "partitions", only the enhanced user data area one actually
slices the user data area partition and, thus, gets handled with the
help of geom_flashmap(4). The other types of partitions have address
space independent from the default partition and need to be switched
to via CMD6 (SWITCH), i. e. constitute a set of additional "disks".
The second kind of these "partitions" doesn't fit that well into the
design of mmc(4) and mmcsd(4). I've decided to let mmcsd(4) hook all
of these "partitions" up as disk(9)'s (except for the RPMB partition
as it didn't seem to make much sense to be able to put a file-system
there and may require authentication; therefore, RPMB partitions are
solely accessible via the newly added IOCTL interface currently; see
also below). This approach for one resulted in cleaner code. Second,
it retains the notion of mmcsd(4) children corresponding to a single
physical device each. With the addition of some layering violations,
it also would have been possible for mmc(4) to add separate mmcsd(4)
instances with one disk each for all of these "partitions", however.
Still, both mmc(4) and mmcsd(4) share some common code now e. g. for
issuing CMD6, which has been factored out into mmc_subr.c.
Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
code in the boot partitions etc., another use case for the partition
support is the activation of pseudo-SLC mode, which manufacturers of
eMMC chips typically associate with the enhanced user data area and/
or the enhanced attribute of general purpose partitions.
CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.
- Now that properly issuing CMD6 is crucial (so data isn't written to
the wrong partition for example), make a step into the direction of
correctly handling the timeout for these commands in the MMC layer.
Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
recommended by relevant specifications. However, quite some work is
left to be done in this regard; all other R1B-type commands done by
the MMC layer also should be followed by a SEND_STATUS (CMD13), the
erase timeout calculations/handling as documented in specifications
are entirely ignored so far, the MMC layer doesn't provide timeouts
applicable up to the bridge drivers and at least sdhci(4) currently
is hardcoding 1 s as timeout for all command types unconditionally.
Let alone already available return codes often not being checked in
the MMC layer ...
- Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
with Linux so that the GNU mmc-utils can be ported to and used with
FreeBSD (note that due to the remaining deficiencies outlined above
SANITIZE operations issued by/with `mmc` currently most likely will
fail). These latter will be added to ports as sysutils/mmc-utils in
a bit. Among others, the `mmc` tool of the GNU mmc-utils allows for
partitioning eMMC devices (tested working).
- For devices following the eMMC specification v4.41 or later, year 0
is 2013 rather than 1997; so correct this for assembling the device
ID string properly.
- Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
least for some of the above a matching pair is required.
- In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC
controllers as such in order to match the PCI one.
Additionally, in the entry for the 80860F14 SDXC controller remove
the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.
OKed by: imp
Submitted by: ian (mmc_switch_status() implementation)
This change contains several negative and positive tests for:
- cam_open_device
- cam_close_device
- cam_getccb
- cam_freeccb
This also contains a test for the failure case noted in bug 217649,
i.e., O_RDWR must be specified because pass(4) requires it.
This test unfortunately cannot assume that cam-capable devices are
present, so the user must explicitly provide a device via
`test_suites.FreeBSD.cam_test_device`. In the future, a test kernel
module might be shipped, or ctl(4) might be used, as a test device
when testing out libcam, which will allow the tests to do away with
having to specify an explicit test device.
Reviewed by: asomers, ken (earlier diff)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: D9928
This change moves the tests added in r313962 to an existing directory
structure used by the geli TAP tests. It also, renames the test from
pbkdf2 to pbkdf2_test .
The changes to ObsoleteFiles.inc are being committed separately as they
aren't needed for the MFC to ^/stable/11, etc, if the MFC for the tests
is done all in one commit.
MFC after: 2 weeks
X-MFC with: r313962, r313972-r313973
Reviewed by: allanjude
Sponsored by: Dell EMC Isilon
Differential Revision: D9985
The exit status will be 124, as the timeout(1) utility uses.
Reviewed by: jilles
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9697
test suite
This change does the following:
- Introduces symmetry in the test inputs/outputs by adding the exit
code to the files. This simplified the test driver notably by
requiring less filename/test name manipulation.
- Adds a test driver for the testcases added in r313544, patterned
after bin/sh/tests/functional_test.sh . The driver calls indent as
noted in r313544, with an exception: The $FreeBSD$ RCS keyword's
expansion is reindented with indent, which means that the output
differs from the expected output. Thus, all lines with $FreeBSD$
in them are deleted on the fly, both in the input file and the
output file.
The test inputs/outputs are copied to the kyua sandbox before the
test is run as the pathing in some of the files relies on pathing
normalized to the current directory (copying the files is the
easiest way to resolve the issue).
Approved by: pstef (maintainer)
Reviewed by: pstef
X-MFC with: r313544
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9682
The PBKDF2 in sys/geom/eli/pkcs5v2.c is around half the speed it could be
GELI's PBKDF2 uses a simple benchmark to determine a number of iterations
that will takes approximately 2 seconds. The security provided is actually
half what is expected, because an attacker could use the optimized
algorithm to brute force the key in half the expected time.
With this change, all newly generated GELI keys will be approximately 2x
as strong. Previously generated keys will talk half as long to calculate,
resulting in faster mounting of encrypted volumes. Users may choose to
rekey, to generate a new key with the larger default number of iterations
using the geli(8) setkey command.
Security of existing data is not compromised, as ~1 second per brute force
attempt is still a very high threshold.
PR: 202365
Original Research: https://jbp.io/2015/08/11/pbkdf2-performance-matters/
Submitted by: Joe Pixton <jpixton@gmail.com> (Original Version), jmg (Later Version)
Reviewed by: ed, pjd, delphij
Approved by: secteam, pjd (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8236
* Rewrite r_buf to use standard tail queues instead of a hand-rolled
circular linked list. Free dynamic allocations when done.
* Remove an optimization for the case where the file is a multiple of 128KB
in size and there is a scarcity of memory.
* Add ATF tests for "tail -r" and its variants.
Reported by: Valgrind
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9067
VSS stands for "Volume Shadow Copy Service". Unlike virtual machine
snapshot, it only takes snapshot for the virtual disks, so both
filesystem and applications have to aware of it, and cooperate the
whole VSS process.
This driver exposes two device files to the userland:
/dev/hv_fsvss_dev
Normally userland programs should _not_ mess with this device file.
It is currently used by the hv_vss_daemon(8), which freezes and
thaws the filesystem. NOTE: currently only UFS is supported, if
the system mounts _any_ other filesystems, the hv_vss_daemon(8)
will veto the VSS process.
If hv_vss_daemon(8) was disabled, then this device file must be
opened, and proper ioctls must be issued to keep the VSS working.
/dev/hv_appvss_dev
Userland application can opened this device file to receive the
VSS freeze notification, hold the VSS for a while (mainly to flush
application data to filesystem), release the VSS process, and
receive the VSS thaw notification i.e. applications can run again.
The VSS will still work, even if this device file is not opened.
However, only filesystem consistency is promised, if this device
file is not opened or is not operated properly.
hv_vss_daemon(8) is started by devd(8) by default. It can be disabled
by editting /etc/devd/hyperv.conf.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: kib, mckusick
MFC after: 3 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8224
All the '.conf' files not beginning with a '.' contained int he directory
following the keyword will be included.
This keyword can only be used in the first level configuration files.
Modify the default syslogd.conf to 'include' /etc/syslog.d and
/usr/local/etc/syslog.d
It simplify a lot handling of syslog from automation tools.
Reviewed by: markj, kib (via irc)
Approved by: markj
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D8402
